This will avoid losing any messages received from 1 client when a push
involving another client is running.
Additionally, the handling of push initiation is improved,
it's no longer allowed to run multiples of the same type of push to
the same client.
Still stalls sometimes :(
Observed: With 2 xmpp clients, one would sometimes stop responding
to CanPush messages. Often it was in the middle of a receive-pack
of its own (or was waiting for a failed one to time out).
Now these are always immediately responded to, which is fine; the point
of CanPush is to find out if there's another client out there that's
interested in our push.
Also, in queueNetPushMessage, queue push initiation messages when
we're already running the side of the push they would initiate.
Before, these messages were sent into the netMessagesPush channel,
which was wrong. The xmpp send-pack and receive-pack code discarded
such messages.
This still doesn't make XMPP push 100% robust. In testing, I am seeing
it sometimes try to run two send-packs, or two receive-packs at once
to the same client (probably because the client sent two requests).
Also, I'm seeing rather a lot of cases where it stalls out until it
runs into the 120 second timeout and cancels a push.
And finally, there seems to be a bug in runPush. I have logs that
show it running its setup action, but never its cleanup action.
How is this possible given its use of E.bracket? Either some exception
is finding its way through, or the action somehow stalls forever.
When this happens, one of the 2 clients stops syncing.
As seen in this bug report, the lifted exception handling using the StateT
monad throws away state changes when an action throws an exception.
http://git-annex.branchable.com/bugs/git_annex_fork_bombs_on_gpg_file/
.. Which can result in cached values being redundantly calculated, or other
possibly worse bugs when the annex state gets out of sync with reality.
This switches from a StateT AnnexState to a ReaderT (MVar AnnexState).
All changes to the state go via the MVar. So when an Annex action is
running inside an exception handler, and it makes some changes, they
immediately go into affect in the MVar. If it then throws an exception
(or even crashes its thread!), the state changes are still in effect.
The MonadCatchIO-transformers change is actually only incidental.
I could have kept on using lifted-base for the exception handling.
However, I'd have needed to write a new instance of MonadBaseControl
for the new monad.. and I didn't write the old instance.. I begged Bas
and he kindly sent it to me. Happily, MonadCatchIO-transformers is
able to derive a MonadCatchIO instance for my monad.
This is a deep level change. It passes the test suite! What could it break?
Well.. The most likely breakage would be to code that runs an Annex action
in an exception handler, and *wants* state changes to be thrown away.
Perhaps the state changes leaves the state inconsistent, or wrong. Since
there are relatively few places in git-annex that catch exceptions in the
Annex monad, and the AnnexState is generally just used to cache calculated
data, this is unlikely to be a problem.
Oh yeah, this change also makes Assistant.Types.ThreadedMonad a bit
redundant. It's now entirely possible to run concurrent Annex actions in
different threads, all sharing access to the same state! The ThreadedMonad
just adds some extra work on top of that, with its own MVar, and avoids
such actions possibly stepping on one-another's toes. I have not gotten
rid of it, but might try that later. Being able to run concurrent Annex
actions would simplify parts of the Assistant code.
This fixes a bug with git annex add in direct mode. If some files already
existed in the tree pointing at the same key as a file that was just added,
and their content was not present, add neglected to copy the content to
those files.
I also changed the behavior of moveAnnex slightly: When content is moved
into the annex in direct mode, it does not overwrite any content already
present in direct mode files. That content may be modified after all.
Unless the request is for repo uuid we already know. This way, if A1 pairs
with friend B1, and B1 pairs with device B2, then B1 can request A1 pair
with it and no confirmation is needed. (In future, may want to try to do
that automatically, to make a more robust network.)
Observed that the pushed refs were received, but not merged into master.
The merger never saw an add event for these refs. Either git is not writing
to a new file and renaming it into place, or the inotify code didn't notice
that. Changed it to also watch for modify events and that seems to have
fixed it!
(Except for the actual streaming of receive-pack through XMPP, which
can only run once we've gotten an appropriate uuid in a push initiation
message.)
Pushes are now only initiated when the initiation message comes from a
known uuid. This allows multiple distinct repositories to use the same xmpp
address.
Note: This probably breaks initial push after xmpp pairing, because at that
point we may not know about the paired uuid, and so reject the push from
it. It won't break in simple cases, because the annex-uuid of the remote
is checked. However, when there are multiple clients behind a single xmpp
address, only uuid of the first is recorded in annex-uuid, and so any
pushes from the others will be rejected (unless the first remote pushes their
uuids to us beforehand.
Without this, a very large batch add has commits of sizes approx
5000, 2500, 1250, etc down to 10, and then starts over at 5000.
This fixes it so it's 5000+ every time.
That hook updates associated file bookkeeping info for direct mode.
But, everything already called addAssociatedFile when adding/changing a
file. It only needed to also call removeAssociatedFile when deleting a file,
or a directory.
This should make bulk adds faster, by some possibly significant amount.
Bulk removals may be a little slower, since it has to use catKeyFile now
on each removed file, but will still be faster than adds.
There's a tradeoff between making less frequent commits, and
needing to use memory to store all the changes that are coming
in. At 10 thousand, it needs 150 mb of memory. 5 thousand drops
that down to 90 mb or so.
This also turns out to have significant imact on total run time.
I benchmarked 10k changes taking 27 minutes. But two 5k batches
took only 21 minutes.
If an add failed, we should lose the KeySource, since it, presumably,
differs due to a change that was made to the file.
(The locked down file is already deleted.)
Turns out that a lot of the time spent in a bulk add was just updating the
add alert to rotate through each file that was added. Showing one alert
makes for a significant speedup.
Also, when the webapp is open, this makes it take quite a lot less cpu
during bulk adds.
Also, it lets the user know when a bulk add happened, which is sorta
nice..
This better handles error messages formatted for console display, by
adding a <br> after each line.
Hmm, I wonder if it'd be worth pulling in a markdown formatter, and running
the messages through it?
In the case of the inotify limit warning, particularly, if it happens once
it will be happening repeatedly, and so combining alerts resulted in a
much too large alert message that took up a lot of memory and was too
large for the webapp to display.
Making this a tset of lists of Changes, rather than a tset of Changes
makes refilling it, in batch mode, much more efficient. Rather than needing
to add every Change it's collected one at a time, it can add them in one
fast batch operation.
It would be more efficient yet to use a Set, but that would need an Eq
instance for InodeCache.
This is so git remotes on servers without git-annex installed can be used
to keep clients' git repos in sync.
This is a behavior change, but since annex-sync can be set to disable
syncing with a remote, I think it's acceptable.
Incidentially should work around the last problem that prevented the webapp
building on Android. (Except for a few places I need to clean up after
hand-fixing the spliced TH code.)
assistant: Work around horrible, terrible, very bad behavior of
gnome-keyring, by not storing special-purpose ssh keys in ~/.ssh/*.pub.
Apparently gnome-keyring apparently will load and indiscriminately use such
keys in some cases, even if they are not using any of the standard ssh key
names. Instead store the keys in ~/.ssh/annex/, which gnome-keyring will
not check.
Note that neither I nor #debian-devel were able to quite reproduce this
problem, but I believe it exists, and that this fixes it. And it certianly
won't hurt anything..
* addurl: Register transfer so the webapp can see it.
* addurl: Automatically retry downloads that fail, as long as some
additional content was downloaded.
Unless highRandomQuality=false (or --fast) is set, use Libgcypt's
'GCRY_VERY_STRONG_RANDOM' level by default for cipher generation, like
it's done for OpenPGP key generation.
On the assistant side, the random quality is left to the old (lower)
level, in order not to scare the user with an enless page load due to
the blocking PRNG waiting for IO actions.
Fixed by storing a list of cached inodes for a key, instead of just one.
Backwards compatability note: An old git-annex version will fail to parse
an inode cache file that has been written by a new version, and has
multiple items. It will succees if just one. So old git-annexes will have
even worse behavior when there are duplicated files, if that is possible.
I don't think it will be a problem. (Famous last words.)
Also, note that it doesn't expire old and unused inode caches for a key.
It would be possible to add this if needed; just look through the
associated files for a key and if there are more cached inodes, throw out
any not corresponding to associated files. Unless a file is being copied
repeatedly and the old copy deleted, this lack of expiry should not be a
problem.
* since this is a crippled filesystem anyway, git-annex doesn't use
symlinks on it
* so there's no reason to use the mixed case hash directories that we're
stuck using to avoid breaking everyone's symlinks to the content
* so we can do what is already done for all bare repos, and make non-bare
repos on crippled filesystems use the all-lower case hash directories
* which are, happily, all 3 letters long, so they cannot conflict with
mixed case hash directories
* so I was able to 100% fix this and even resuming `git annex add` in the
test case will recover and it will all just work.
This avoids commit churn by the assistant when eg,
replacing a file with a symlink.
But, just as importantly, it prevents the working tree being left with a
deleted file if git-annex, or perhaps the whole system, crashes at the
wrong time.
(It also probably avoids confusing displays in file managers.)
My test case for this bug is to have the assistant running and syncing to
a remote, and create a file in the annex. Then at the command line run
git annex drop. The assistant sees that the file is gone, sees it's a wanted
file, and downloads it from the remote.
With a directory special remote and a small file, I was seeing around 1
time in 3, a race where the file got unstaged from git after it got
downloaded.
Looking at what direct mode content managing code does in this case, it
deletes the symlink, and then adds the file content back. It would be
possible, sometimes, to avoid removing the symlink and do this atomically.
And I probably should.. but in some cases, particularly where the file
needs to be run through `cp` (multiple direct mode files with same
content), there's no way to atomically replace the symlink with the
content.
Anyway, the bug turns out to be something that the watcher does right for
indirect mode, but not for direct mode. When it got an add event, it
checked to see if this was a new file, or one we've already added. In the
latter case, no add event was queued. But that means that only the rm event
is queued, and so it unstages the file.
Fixed by queueing an add event even when the file is already in git.
Tested by running hundreds of drops in a loop; file remained staged.
I would have sort of liked to put this in .gitattributes, but it seems
it does not support multi-word attribute values. Also, making this a single
config setting makes it easy to only parse the expression once.
A natural next step would be to make the assistant `git add` files that
are not annex.largefiles. OTOH, I don't think `git annex add` should
`git add` such files, because git-annex command line tools are
not in the business of wrapping git command line tools.
When a page is loaded, the javascript requests an notification url, and
does long polling on the url to be informed of changes. But if a change
occured before the notification url was requested, it would not be notified
of that change, and so the page display would not update.
I fixed this by *always* updating the page display after it gets
the notification url. This is extra work, but the overhead is not noticable
in the other overhead of loading a page.
(A nicer way would be to somehow record the version of a page initially
loaded, and then compare it with the current version when getting the
notification url, and only force an update if it's changed. But getting
the "version" of the different parts of the page that use long polling
is difficult.)
Needed to send a trailing NUL to end a request, and set the read handle
non-blocking.
Also, set fileSystemEncoding on all handles, since there's a filename in
there.
Like the old one, but does not mention which remotes are scanned.
I think this is less confusing, as it does not imply the remotes
were somehow accessed (which they are not; inaccessible remotes
can be scanned.)
If transferkey crashes or even fails to run, the TransferWatcher will not
see the transfer info file be created, so will not remove the transfer
from the list of active transfers. This causes the list to grow
continually, and all active transfers are displayed in the webapp. So, put
in a guard.
I assume that transferkey will not exit 0 while neglecting to clean up.
Rather than forking a git-annex transferkey only to have it fail,
just immediately record the failed transfer (so when the drive is plugged
in, the scan will retry it).
This may work around google talk's horrible presence handling, in which
clients often don't learn about other clients, at least when using the same
account. This way, every time we start a git push over xmpp, we'll waste
bandwidth asking clients to please try again to identify themselves.
Just before starting a transfer, do one last check that it's still
preferred content.
I was just doing this for uploads, as part of the smarter flood filling
bug, but realized it's also possible for a download that was preferred
content to change to not be before the download begins, so check that too.
Rather than wait a full second, which may be longer than needed, or too
short to get all the rename events, we start a mode where we wait 1/10th of
a second, and if there are Changes received, wait again. Basically we're
back in batch mode when this happens.
This cleaned up the code quite a bit; now the committer just looks at the
Change to see if it's a change that needs to have a transfer queued for it.
If I later want to add dropping keys for files that were removed, or
something like that, this should make it straightforward.
This also fixes a bug. In direct mode, moving a file out of an archive
directory failed to start a transfer to get its content. The problem
was that the file had not been committed to git yet, and so the transfer
code didn't want to touch it, since fileKey failed to get its key.
Only starting transfers after a commit avoids this problem.
I saw this happen in real life, when syncing to a newly added usb drive.
I think it got scanned twice, and files were doubled in the queue.
This could be optimised a little bit more, to only read from the mvar
once, rather than twice.
This is not perfect, because on loss of connection, we do not currently
immediately detect it and stop the client. It has to time out, and then
the buddy list will clear.
The NetWatcher should detect disconnects too..
I have a theory that some google xmpp servers don't send prsense for xa
clients, while others do. Seeing some weird lack of presence messages
sometimes there.
Noticed that, At startup or network reconnect, git push messages were sent,
often before presence info has been gathered, so were not sent to any
buddies.
To fix this, keep track of which buddies have seen such messages,
and when new presence is received from a buddy that has not yet seen it,
resend.
This is done only for push initiation messages, so very little data needs
to be stored.
This fixes the issue mentioned in the last commit.
Turns out just collecting UUID of clients behind a XMPP remote is
insufficient (although I should probably still do it for other reasons),
because a single remote repo might be connected via both XMPP and local
pairing. So a way is needed to know when a push was received from any
client using a given XMPP remote over XMPP, as opposed to via ssh.
Make manualPull send push requests over XMPP.
When reconnecting with remotes, those that are XMPP remotes cannot
immediately be pulled from and scanned, so instead maintain a set of
(probably) desynced remotes, and put XMPP remotes on it. (This set could be
used in other ways later, if we can detect we're out of sync with other
types of remotes.)
The merger handles detecting when a XMPP push is received from a desynced
remote, and triggers a scan then, if they have in fact diverged.
This has one known bug: A single XMPP remote can have multiple clients
behind it. When this happens, only the UUID of one client is recorded
as the UUID of the XMPP remote. Pushes from the other XMPP clients will not
trigger a scan. If the client whose UUID is expected responds to the push
request, it'll work, but when that client is offline, we're SOL.
Clean up from 9769235d6b.
In some cases, looking up a remote by name even though it has no UUID is
desirable. This includes git annex sync, which can operate on remotes
without an annex, and XMPP pairing, which runs addRemote (with calls
byName) before the UUID of the XMPP remote has been configured in git.
Watcher wants to rewrite symlink to fix it. But in direct mode, the symlink
could be replaced at any time with file content that has finished being
transferred by some other process. So, just don't touch it.
FWIW, I audited the rest of the assistant for places where it removes
files, and the rest is ok. I have not audited the rest of git-annex.
assistant: Fix bug in direct mode that could occur when a symlink is moved
out of an archive directory, and resulted in the file not being set to
direct mode when it was transferred.
The bug was that the direct mode mapping was not up-to-date when the
transferrer finished. So, finding no direct mode place to store the object,
it was put into .git/annex in indirect mode.
To fix this, just make the watcher update the direct mode mapping to
include the new file before it starts the transfer. (Seems we don't need to
update it to remove the old file if the link was moved, because the direct
mode code will notice it's not present and the mapping gets updated for its
removal later.)
The reason this was a race, and was probably not seen often is because
the committer came along and updated the direct mode mapping as part of
adding the moved symlink. But when the file was sufficiently small or
the remote sufficiently fast, this could happen after the transfer
finished.
Looking through the git sources (documentation is unclear),
it seems commit doesn't ever trigger git-gc, mostly fetching and merging
seems to. I cannot easily override the setting in all those places, so
instead set gc.auto in git config when initializing a repository with
the assistant.
This does mean that the user cannot set gc.auto=0 and completely avoid
repacks, as the assistant does it daily. But, it only does it after there
are 100x the default number of loose objects, so this is probably not going
to be too annoying.
Pass subcommand as a regular param, which allows passing git parameters
like -c before it. This was already done in the pipeing set of functions,
but not the command running set.
A transfer is queued, but if the file has already been transferred to the
remote before, the transfer is skipped. In this case, it needs to perform
any actions it would normally take after finishing the transfer, like
dropping the local object.
This cannot completely guard against a runaway log event, and only runs
every hour anyway, but it should avoid most problems with very
long-running, active assistants using up too much space.
The transfer queue can grow larger than 10 when queueing transfers for
files that were just received, as well as requeueing failed transfers.
I probably need to do some work to prevent that, as it could use a lot of
RAM. But for now, cap the number of displayed transfers in the webapp, to
avoid flooding the browser.
The only thing lost is ./ghci
Speed: make fast used to take 20 seconds here, when rebuilding from
touching Command/Unused.hs. With cabal, it's 29 seconds.
Refactored annex link code into nice clean new library.
Audited and dealt with calls to createSymbolicLink.
Remaining calls are all safe, because:
Annex/Link.hs: ( liftIO $ createSymbolicLink linktarget file
only when core.symlinks=true
Assistant/WebApp/Configurators/Local.hs: createSymbolicLink link link
test if symlinks can be made
Command/Fix.hs: liftIO $ createSymbolicLink link file
command only works in indirect mode
Command/FromKey.hs: liftIO $ createSymbolicLink link file
command only works in indirect mode
Command/Indirect.hs: liftIO $ createSymbolicLink l f
refuses to run if core.symlinks=false
Init.hs: createSymbolicLink f f2
test if symlinks can be made
Remote/Directory.hs: go [file] = catchBoolIO $ createSymbolicLink file f >> return True
fast key linking; catches failure to make symlink and falls back to copy
Remote/Git.hs: liftIO $ catchBoolIO $ createSymbolicLink loc file >> return True
ditto
Upgrade/V1.hs: liftIO $ createSymbolicLink link f
v1 repos could not be on a filesystem w/o symlinks
Audited and dealt with calls to readSymbolicLink.
Remaining calls are all safe, because:
Annex/Link.hs: ( liftIO $ catchMaybeIO $ readSymbolicLink file
only when core.symlinks=true
Assistant/Threads/Watcher.hs: ifM ((==) (Just link) <$> liftIO (catchMaybeIO $ readSymbolicLink file))
code that fixes real symlinks when inotify sees them
It's ok to not fix psdueo-symlinks.
Assistant/Threads/Watcher.hs: mlink <- liftIO (catchMaybeIO $ readSymbolicLink file)
ditto
Command/Fix.hs: stopUnless ((/=) (Just link) <$> liftIO (catchMaybeIO $ readSymbolicLink file)) $ do
command only works in indirect mode
Upgrade/V1.hs: getsymlink = takeFileName <$> readSymbolicLink file
v1 repos could not be on a filesystem w/o symlinks
Audited and dealt with calls to isSymbolicLink.
(Typically used with getSymbolicLinkStatus, but that is just used because
getFileStatus is not as robust; it also works on pseudolinks.)
Remaining calls are all safe, because:
Assistant/Threads/SanityChecker.hs: | isSymbolicLink s -> addsymlink file ms
only handles staging of symlinks that were somehow not staged
(might need to be updated to support pseudolinks, but this is
only a belt-and-suspenders check anyway, and I've never seen the code run)
Command/Add.hs: if isSymbolicLink s || not (isRegularFile s)
avoids adding symlinks to the annex, so not relevant
Command/Indirect.hs: | isSymbolicLink s -> void $ flip whenAnnexed f $
only allowed on systems that support symlinks
Command/Indirect.hs: whenM (liftIO $ not . isSymbolicLink <$> getSymbolicLinkStatus f) $ do
ditto
Seek.hs:notSymlink f = liftIO $ not . isSymbolicLink <$> getSymbolicLinkStatus f
used to find unlocked files, only relevant in indirect mode
Utility/FSEvents.hs: | Files.isSymbolicLink s = runhook addSymlinkHook $ Just s
Utility/FSEvents.hs: | Files.isSymbolicLink s ->
Utility/INotify.hs: | Files.isSymbolicLink s ->
Utility/INotify.hs: checkfiletype Files.isSymbolicLink addSymlinkHook f
Utility/Kqueue.hs: | Files.isSymbolicLink s = callhook addSymlinkHook (Just s) change
all above are lower-level, not relevant
Audited and dealt with calls to isSymLink.
Remaining calls are all safe, because:
Annex/Direct.hs: | isSymLink (getmode item) =
This is looking at git diff-tree objects, not files on disk
Command/Unused.hs: | isSymLink (LsTree.mode l) = do
This is looking at git ls-tree, not file on disk
Utility/FileMode.hs:isSymLink :: FileMode -> Bool
Utility/FileMode.hs:isSymLink = checkMode symbolicLinkMode
low-level
Done!!
git annex init probes for crippled filesystems, and sets direct mode, as
well as `annex.crippledfilesystem`.
Avoid manipulating permissions of files on crippled filesystems.
That would likely cause an exception to be thrown.
Very basic support in Command.Add for cripped filesystems; avoids the lock
down entirely since doing it needs both permissions and hard links.
Will make this better soon.
This is so gratutious and pointless. It's a shame that everything we
learned about Unix portability and the importance of standards has been
thrown out the window by these guys.
Various things that don't work on Android are just ifdefed out.
* the webapp (needs template haskell for arm)
* --include and --exclude globbing (needs libpcre, which is not ported;
probably I'll make it use the pure haskell glob library instead)
* annex.diskreserve checking (missing sys/statvfs.h)
* timestamp preservation support (yawn)
* S3
* WebDAV
* XMPP
The resulting 17mb binary has been tested on Android, and it is able to,
at least, print its usage message.
Making the pre-commit hook look at git diff-index to find changed direct
mode files and update the mappings works pretty well.
One case where it does not work is when a file is git annex added, and then
git rmed, and then this is committed. That's a no-op commit, so the hook
probably doesn't even run, and it certianly never notices that the file
was deleted, so the mapping will still have the original filename in it.
For this and other reasons, it's important that the mappings still be
treated as possibly inconsistent.
Also, the assistant now allows the pre-commit hook to run when in direct
mode, so the mappings also get updated there.
New setting, can be used to disable autocommit of changed files by the
assistant, while it still does data syncing and other tasks.
Also wired into webapp UI
It used to not log to daemon.log when a repository was first created, and
when starting the webapp. Now both do. Redirecting stdout and stderr to the
log is tricky when starting the webapp, because the web browser may want to
communicate with the user. (Either a console web browser, or web.browser = echo)
This is handled by restoring the original fds when running the browser.
since some systems may have configuration problems or other issues that
prevent web browsers from connecting to the right localhost IP for the
webapp.
Tested on both ipv4 and ipv6 localhost. Url for the latter looks like:
http://[::1]:50676
The expensive scan uses lookupFile, but in direct mode, that doesn't work
for files that are present. So the scan was not finding things that are
present that need to be uploaded. (It did find things not present that
needed to be downloaded.)
Now lookupFile also works in direct mode. Note that it still prefers
symlinks on disk to info committed to git, in direct mode. This is
necessary to make things like Assistant.Threads.Watcher.onAddSymlink
work correctly, when given a new symlink not yet checked into git (or
replacing a file checked into git).
This way, once it switches to the new repo, the user can switch back to the
old one, and its menu will allow switching to the new again.
However, if there are multiple repos, the others don't yet learn about the
new repo.
Would like to also have restart UI, but that's rather harder to do,
seems it'd need to start another copy of the webapp, and redirect the
browser to its new url, but running two assistants in the same repo at
the same time isn't good.
Now there's a Config type, that's extracted from the git config at startup.
Note that laziness means that individual config values are only looked up
and parsed on demand, and so we get implicit memoization for all of them.
So this is not only prettier and more type safe, it optimises several
places that didn't have explicit memoization before. As well as getting rid
of the ugly explicit memoization code.
Not yet done for annex.<remote>.* configuration settings.
When a file is changed in direct mode, the old content is probably lost
(at least from the local repo), and bookeeping needs to be updated to
reflect this.
Also, synthetic add events are generated at assistant startup, so
make it detect when the file has not really changed, and avoid re-adding
it.
This does add the overhead of querying the runing git cat-file for the
key that's recorded in git for the file, each time a file is added or
modified in direct mode.
git add --update cannot be used, because it'll stage typechanged direct
mode files. Intead, use ls-files to find deleted files, and stage them
ourselves.
It seems that no commit was made before when the scan staged deleted files.
(Probably masked since if files were added, a commit happened then..)
Now that I'm doing the staging, I was also able to fix that bug.
This allows it to use Build.SysConfig to always install the programs
configure detected. Amoung other fixes, this ensures the right uuid
generator and checksum programs are installed.
I also cleaned up the handling of lsof's path; configure now checks for
it in PATH, but falls back to looking for it in sbin directories.
* get/copy --auto: Transfer data even if it would exceed numcopies,
when preferred content settings want it.
* drop --auto: Fix dropping content when there are no preferred content
settings.
It was doubly broken; both missing a slash, and containing
"runshell git-annex", while some parts of the code expected it to be a
simple path to a program. This appears to include the transfer queue
runner, and the code that starts a new assistant process when switching to
another repository in the webapp.
For no apparent reason, this version removes all useful instances of
ToJavaScript, leavind behind only an instance for Aeson.Value. Argh. Pissed
off at this arbitrary breaking change, and seriously considering dropping
this library.
Noticed that when pairing, sometimes both sides start to push, and the other
side sends a PushRequest, and the two deadlock, neither doing anything.
(Timeout eventually breaks this.) So, let both run at the same time.
This should help prevent git-annex clients receiving messages that
were intended for normal clients they're sharing the account with.
Changed XMPP protocol use to always send chat messages directed at the
specific client, as the negative priority blocks less directed messages.
I decided to use the fallback push mode from the beginning for XMPP, since
while it uses some ugly branches, it avoids the possibility of a normal
push failing, and needing to pull and re-push. Due to the overhead of XMPP,
and the difficulty of building such a chain of actions due to the async
implementation, this seemed reasonable.
It seems to work great!
My reasoning is that StartingPush could be received after another push
starts being received, and it would be better to respond to it afterwards
than not.
XMPP has no defined message size limits, but some servers will have ad-hoc
limits. However, 4k seems safe, even after the additional bloat of base64.
That should not exceed 8k.
Inject the required git-remote-xmpp into PATH when running xmpp git push.
Rest of the time it will not be in PATH, and git won't be able to talk to
xmpp remotes.
It might even work, although nothing yet triggers XMPP pushes.
Also added a set of deferred push messages. Only one push can run at a
time, and unrelated push messages get deferred. The set will never grow
very large, because it only puts two types of messages in there, that
can only vary in the client doing the push.
Maybe the spec allows it, but broadcasting self-directed presence info to
all buddies is just insane.
I had to bring back the IQ messages for self-pairing, while still using
directed presence for other pairing. Ugly.
Testing between Google Talk and prosody, the directed IQ messages
were not received. Google Talk probably only relays them between
clients using the same account.
I first tried even more directed presence, with each client JID being sent
a separate presence, but that didn't work on Google Talk, particularly
it was ignored when one client sent it to another client using the same
account.
So, presence directed at the user@host of the client to pair with. Tested
working between Google Talk and prosody (in both directions), as well
as between two clients with the same account on Google Talk, and
two clients with the same account on prosody.
Only problem with this form of directed presence is that if I also use it
for git pushes, more clients than are interested in a push's data will
receive it. So I may need some better approach, or a hybrid between
directed IQ and directed presence.
Amusingly, I am not really using xmpp ping for pairing. I forgot to put in
the ping tag! And when I did, it stopped working, on Google Talk. Seems
it handles client to client pings, at least using the same JID, without
actually sending them to the end client. My mistake avoided this,
and seems to work, so I've left it as-is for now, with just the git-annex
tag in an IQ message. Also tested on prosody.
Wrote a better git remote name sanitizer. Git blows up on lots of weird
stuff, especially if it starts the remote name, but I managed to get
some common punctuation working.
Still wait 1 minute after a change before waiting on the next change, but don't
wait at the start, when we might get a pull that contains config changes
right away.
Currently have three old versions of functions that more reworking is
needed to remove: getDaemonStatusOld, modifyDaemonStatusOld_, and
modifyDaemonStatusOld
This is a nice win; much less code runs in Annex, so other threads have
more chances to run concurrently.
I do notice that renaming a file has gone from 1 to 2 commits. I think this
is due to the above improvement letting the committer run more frequently,
so it commits the rm first.
Converted several threads to run in the monad.
Added a lot of useful combinators for working with the monad.
Now the monad includes the name of the thread.
Some debugging messages are disabled pending converting other threads.
I now have this topology working:
assistant ---> {bare repo, special remote} <--- assistant
And, I think, also this one:
+----------- bare repo --------+
v v
assistant ---> special remote <--- assistant
While before with assistant <---> assistant connections, both sides got
location info updated after a transfer, in this topology, the bare repo
*might* get its location info updated, but the other assistant has no way to
know that it did. And a special remote doesn't record location info,
so transfers to it won't propigate out location log changes at all.
So, for these to work, after a transfer succeeds, the git-annex branch
needs to be pushed. This is done by recording a synthetic commit has
occurred, which lets the pusher handle pushing out the change (which will
include actually committing any still journalled changes to the git-annex
branch).
Of course, this means rather a lot more syncing action than happened
before. At least the pusher bundles together very close together pushes,
somewhat. Currently it just waits 2 seconds between each push.
I am befuddled that Twitter Bootstrap has no built-in Icon for The Cloud,
and also that Chromium's depiction of CLOUD (U+2601) has an uncanny
resemblance to PILE OF POO (U+1F4A9) when rendered small, and looks like a
looming Frankenstorm when rendered large, and not a sweet, sunny, nothing
can go wrong The Cloud.
<http://www.fileformat.info/info/unicode/char/2601/browsertest.htm>
So, I must resort to irony in my choice of icons.
Adjust build deps to ensure that only a fixed version of the library will
be used.
Also, removed the bound thread stuff, which I now think was (probably)
a red herring.
MountWatcher can't do this, because it uses the session dbus,
and won't have access to the new DBUS_SESSION_BUS_ADDRESS if a new session
is started.
Bumped dbus library version, FD leak in it is fixed.
Currently relies on SRV being set, or the JID's hostname being the server
hostname and the port being default. Future work: Allow manual
configuration of user name, hostname, and port.
Now when the dbus connection is dropped, it'll fall back to polling.
I could make it try to reconnect, but there's a FD leak in the dbus
library, so not yet.
This *may* solve the segfault I was seeing when the XMPP library called
startTLS. My hypothesis is as follows:
* TLS is documented
(http://www.gnu.org/software/gnutls/manual/gnutls.html#Thread-safety)
thread safe, but only when a single thread accesses it.
* forkIO threads are not bound to an OS thread, so it was possible for
the threaded runtime to run part of the XMPP code on one thread, and
then switch to another thread later.
So, forkOS, with its bound threads, should be used for the XMPP thread.
Since the crash doesn't happen reliably, I am not yet sure about this fix.
Note that I kept all the other threads in the assistant unbound, because
bound threads have significantly higher overhead.
Seems presence notifications are not sent to clients that have marked
themselves unavailable. (Testing with google talk.)
This is the death knell for the presence hack, because it has to stay
available, and even the toggle to unavailable and back could cause it to
miss a notification. Still, flipped it so it basically works, for now.
Lacking error handling, reconnection, credentials configuration,
and doesn't actually do anything when it receives an incoming notification.
Other than that, it might work! :)
Hooked up everything that needs to notify on pushes. Note that
syncNewRemote does not notify. This is probably ok, and I'd need to thread
more state through to make it do so.
This is only set up to support a single push notification method; I didn't
use a NotificationBroadcaster. Partly because I don't yet know what info
about pushes needs to be communicated, so my data types are only
preliminary.
Monitors git-annex branch for changes, which are noticed by the Merger
thread whenever the branch ref is changed (either due to an incoming push,
or a local change), and refreshes cached config values for modified config
files.
Rate limited to run no more often than once per minute. This is important
because frequent git-annex branch changes happen when files are being
added, or transferred, etc.
A primary use case is that, when preferred content changes are made,
and get pushed to remotes, the remotes start honoring those settings.
Other use cases include propigating repository description and trust
changes to remotes, and learning when a remote has added a new special
remote, so the webapp can present the GUI to enable that special remote
locally.
Also added a uuid.log cache. All other config files already had caches.
This can result in the file being dropped, or being downloaded, or even
being dropped from some other repo.
It's even possible to create a file in a directory where content is not
wanted, which will make the assistant immediately send it elsewhere, and
then drop it.
