This was never supported before. And it doesn't re-encrypt the
gcrypt repo to the new gcrypt-participants, but it does at least now not
crash, and set gcrypt-participants.
This commit was sponsored by andrea rota.
They are handled close the same as they are by git. However, unlike git,
git-annex sometimes needs to pass the -n parameter when using these.
So, this has the potential for breaking some setup, and perhaps there ought
to be a ANNEX_USE_GIT_SSH=1 needed to use these. But I'd rather avoid that
if possible, so let's see if anyone complains.
Almost all places where "ssh" was run have been changed to support the env
vars. Anything still calling sshOptions does not support them. In
particular, rsync special remotes don't. Seems that annex-rsync-transport
already gives sufficient control there.
(Fixed in passing: Remote.Helper.Ssh.toRepo used to extract
remoteAnnexSshOptions and pass them to sshOptions, which was redundant
since sshOptions also extracts those.)
This commit was sponsored by Jeff Goeke-Smith on Patreon.
findShellCommand needs a full path to a file in order to check it for a
shebang on Windows. It was being run with only the base name of the external
special remote program, which would only work when it was in the current
directory.
This is why users in
https://github.com/DanielDent/git-annex-remote-rclone/pull/10 and elsewhere
were complaining that the previous improvements to git-annex didn't make
git-remote-rclone work on Windows.
Also, reworked checkearlytermination, which while it worked, seemed
to rely on a race condition. And, improved its error messages.
This commit was sponsored by Shane-o on Patreon.
sync: When syncing with a local repository located on a crippled
filesystem, run the post-receive hook there, since it wouldn't get run
otherwise. This makes pushing to repos on FAT-formatted removable drives
update them when receive.denyCurrentBranch=updateInstead.
Made Remote.Git export onLocal, which was cleaned up to not have so many
caveats about its use.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
... to avoid it consuming stdin that it shouldn't.
This fixes git-annex-checkpresentkey --batch remote, which didn't output
results for all keys passed into it.
Other git-annex commands that communicate with a remote over ssh may also
have been consuming stdin that they shouldn't have, which could have
impacted using them in eg, shell scripts. For example, a shell script
reading files from stdin and passing them to git annex drop would be
impacted by this bug, whenever git annex drop ran git-annex-shell
checkpresent, it would consume part/all of the stdin that the shell script
was supposed to consume.
Fixed by adding a ConsumeStdin parameter to Annex.Ssh.sshOptions, which
is used throughout git-annex to run ssh (in order for ssh connection
caching to work). Every call site was checked to see if it used
CreatePipe for stdin, and if not was marked NoConsumeStdin.
The check was broken in two ways.. First, nowhere did it error out when
checkUUIDFile found a different UUID already in the file. Instead,
it overwrote the uuid file.
And, checkUUIDFile's implementation was for some reason always failing with
a ConnectionClosed exception. Apparently something to do with using two
different runResourceT's and a response getting GCed inbetween. I'm pretty
sure that used to work, but changed to a more obviously correct
implementation.
This commit was sponsored by Peter Hogg on Patreon.
Most remotes have an idempotent setup that can be reused for
enableremote, but in a few cases, it needs to tell which, and whether
a UUID was provided to setup was used.
This is groundwork for making initremote be able to provide a UUID.
It should not change any behavior.
Note that it would be nice to make the UUID always be provided to setup,
and make setup not need to generate and return a UUID. What prevented
this simplification is Remote.Git.gitSetup, which needs to reuse the
UUID of the git remote when setting it up, and so has to return that
UUID.
This commit was sponsored by Thom May on Patreon.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
The attacker could just send a very lot of data, with no \n and it would
all be buffered in memory until the kernel killed git-annex or perhaps OOM
killed some other more valuable process.
This is a low impact security hole, only affecting communication between
local git-annex and git-annex-shell on the remote system. (With either
able to be the attacker). Only those with the right ssh key can do it. And,
there are probably lots of ways to construct git repositories that make git
use a lot of memory in various ways, which would have similar impact as
this attack.
The fix in P2P/IO.hs would have been higher impact, if it had made it to a
released version, since it would have allowed DOSing the tor hidden
service without needing to authenticate.
(The LockContent and NotifyChanges instances may not be really
exploitable; since the line is read and ignored, it probably gets read
lazily and does not end up staying buffered in memory.)
Display progress meter on send and receive from remote.
Added a new hGetMetered that can read an exact number of bytes (or
less), updating a meter as it goes.
This commit was sponsored by Andreas on Patreon.
In case the repo on the peer changes uuid (eg by a new repo being moved
into place).
Also, added some warning messages when unable to communicate with a
peer.
This commit was sponsored by Anthony DeRobertis on Patreon.
Not tested at all, but it just might work.
Only known problem is that progress is not updated when storing to a P2P
remote.
This commit was sponsored by Nick Daly on Patreon.
Similar to GCrypt remotes, P2P remotes have an url, so Remote.Git has to
separate them out and handle them, passing off to Remote.P2P.
This commit was sponsored by Ignacio on Patreon.
git upload-pack makes some uncessary writes in sequence, this tries to
gather them together to avoid needing to send multiple DATA packets when
just one will do.
In a small pull, this reduces the average number of DATA packets from
4.5 to 2.5.
Still a couple bugs:
* Closing the connection to the server leaves git upload-pack /
receive-pack running, which could be used to DOS.
* Sometimes the data is transferred, but it fails at the end, sometimes
with:
git-remote-tor-annex: <socket: 10>: commitBuffer: resource vanished (Broken pipe)
Must be a race condition around shutdown.
Almost working, but there's a bug in the relaying.
Also, made tor hidden service setup pick a random port, to make it harder
to port scan.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is most of the way to having the p2p protocol working over tor
hidden services, at least enough to do git push/pull.
The free monad was split into two, one for network operations and the
other for local (Annex) operations. This will allow git-remote-tor-annex
to run only an IO action, not needing the Annex monad.
This commit was sponsored by Remy van Elst on Patreon.
A bit tricky since Proto doesn't support threads. Rather than adding
threading support to it, ended up using a callback that waits for both
data on a Handle, and incoming messages at the same time.
This commit was sponsored by Denis Dzyubenko on Patreon.
Is content locking needed in the P2P protocol? Based on re-reading
bugs/concurrent_drop--from_presence_checking_failures.mdwn,
I think so: Peers can form cycles, and multiple peers can all be trying
to drop the same content.
So, added content locking to the protocol, with some difficulty.
The implementation is fine as far as it goes, but note the warning
comment for lockContentWhile -- if the connection to the peer is dropped
unexpectedly, the peer will then unlock the content, and yet the local
side will still think it's locked.
To be honest I'm not sure if Remote.Git's lockKey for ssh remotes
doesn't have the same problem. It checks that the
"ssh remote git-annex-shell lockcontent"
process has not exited, but if the connection closes afer that check,
the lockcontent command will unlock it, and yet the local side will
still think it's locked.
Probably this needs to be fixed by eg, making lockcontent catch any
execptions due to the connection closing, and in that case, wait a
significantly long time before dropping the lock.
This commit was sponsored by Anthony DeRobertis on Patreon.
For use with tor hidden services, and perhaps other transports later.
Based on Utility.SimpleProtocol, it's a line-based protocol,
interspersed with transfers of bytestrings of a specified size.
Implementation of the local and remote sides of the protocol is done
using a free monad. This lets monadic code be included here, without
tying it to any particular way to get bytes peer-to-peer.
This adds a dependency on the haskell package "free", although that
was probably pulled in transitively from other dependencies already.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
* S3: Support the special case endpoint needed for the cn-north-1 region.
* Webapp: Don't list the Frankfurt region, as this (and some other new
regions) need V4 authorization which the aws library does not yet use.
This commit was sponsored by Nick Daly on Patreon.
If a transfer fails for some reason, but some data managed to be sent, the
transfer will be retried. (The assistant already did this.)
Possible impacts:
* More ssh prompts if ssh needs to prompt for a password to connect to a
host, or is prompting about some other problem like a ssh key mismatch.
* More data transfer due to retrying, epecially when a remote does not
support resuming a transfer.
In the worst case, a lot of data will be transferred but it fails before
the end, and then all that data gets transferred again plus one byte more;
repeat until it manages to get the whole file.
Multiple external special remote processes for the same remote will be
started as needed when using -J.
This should not beak any existing external special remotes, because running
multiple git-annex commands at the same time could already start multiple
processes for the same external special remotes.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
Ignore exceptions when getting the cost and availability for the remote,
and return sane defaults. These defaults are not cached, so if a special
remote program has a transient problem, it will re-query it later.
Removed the instance LensGpgEncParams RemoteConfig because it encouraged
code that does not take the RemoteGitConfig into account.
RemoteType's setup was changed to take a RemoteGitConfig,
although the only place that is able to provide a non-empty one is
enableremote, when it's changing an existing remote. This led to several
folow-on changes, and got RemoteGitConfig plumbed through.
This is useful for makking a special remote that anyone with a clone of the
repo and your public keys can upload files to, but only you can decrypt the
files stored in it.
The naming is unofrtunately not consistent, but the gnupg-options
were only used for encrypting, and it's too late to change that.
It would be nice to have a third setting that is always passed to gnupg,
but ~/.gnupg/options can be used to specify such global options when really
needed.
Since git-annex unsets these when started, they have to be explicitly
propigated. Also, this makes --git-dir and --work-tree settings be
reflected in the environment.
The need for this came up in
https://github.com/DanielDent/git-annex-remote-rclone/issues/3
Fix hang when dropping content needs to lock the content on a ssh remote,
which occurred when the remote has git-annex version 5.20151019 or newer.
Analysis: `race` runs 2 threads at once, and the hGetLine finishes first.
So, it tries to cancel the waitForProcess, but unfortunately that is making
a foreign call and so cannot be canceled. The remote git-annex-shell
is waiting for a line on stdin before it will exit. Deadlock.
This only occurred sometimes; I reproduced it going from darkstar to
elephant, but not from darkstar to darkstar. Not sure how that fits into
the above analysis -- perhaps a race condition is also involved?
Fixed by not using `race`; now the hGetLine will fail with an exception
if the remote git-annex-shell exits without any output.
sshOptions is now designed for working out ssh options only, and may
insert the extra options it is given to the middle. So it is incorrect
to call it with the remote parameters at the end. Instead, append them
to its return value.
This half regressed in 5be7ba7, and presumably regressed fully when
sshOptions was changed some time later.
That trailing slash is needed for legacy chunked mode, because it puts the
chunks in a subdir under the key. But, outside legacy chunked mode, it's BS
and it's amazing it worked at all with some webdav servers.
* Removed the webapp-secure build flag, rolling it into the webapp build
flag.
* Removed the quvi and tahoe build flags, which only adds aeson to
the core dependencies.
* Removed the feed build flag, which only adds feed to the core
dependencies.
Build flags have cost in both code complexity and also make Setup configure
have to work harder to find a usable set of build flags when some
dependencies are missing.
In copyFromRemote, it used to check isDirect, but that was not needed;
the remote is sending the file, so it doesn't matter if the local,
receiving repository is in direct mode or not. And, since the content is not
present, yet, it's certianly not unlocked. Note that, the remote may indeed
be sending an unlocked file, but sendkey uses sendAnnex, which will detect
if the file is modified before or during transfer, and will exit nonzero,
aborting the upload. So, the receiver doesn't need any checks.
In copyToRemote, it forces recvkey to verify content whenever it's being
sent from a v6 repository. recvkey is almost always going to verify content
anyway, unless annex.verify is not set. So, this doesn't make it any more
expensive, except for in that unusual configuration. The alternative would
be to change the recvkey interface, so that the sender checks afterwards if
what it was sending changed, and the receiver then throws out the bad
transfer. That would be less expensive for the reciever, as it would not
need to do a checksum verification. But, it would mean another network
round trip, and since rsync closes the connection, it would need to open
another ssh connection to do this. Even with connction caching, that would
add latency to uploads. It would also complicate the interface, especially
because an older git-annex-shell would not have the new interface
available. For these reasons, I prefer punting on that at this time, and
instead someone might set annex.verify=false and be unhappy that it still
verifies..
(One other gotcha not dealt with is that a v5 repo could be upgraded to v6
while an upload is in progress, and a file unlocked and modified.)
(Also, I double-checked Remote.GCrypt's calls to rsyncParamsRemote, and
they're fine. When a file is being uploaded to gcrypt, or any other special
repository, it is mediated by sendAnnex, so changes will be detected at
that level and the special remote implementation doesn't need to worry
about them.)
The direct flag is also set when sending unlocked content, to support old
versions of git-annex-shell. At some point, the direct flag will be
removed, and only the unlocked flag will be used.
Had everything available, just didn't combine the progress meter with the
other places progress is sent to update it. (And to a remote repo already
did show progress.)
Most special remotes should already display progress meters with -J,
same as without it. One exception to this is the web, since it relies on
wget/curl progress display without -J. Still todo..
* Fix failure to build with aws-0.13.0.
* When built with aws-0.13.0, the S3 special remote can be used to create
google nearline buckets, by setting storageclass=NEARLINE.
Instead, only display transport error if the configlist output doesn't
include an annex.uuid line, even an empty one.
A recent change made git-annex init try to get all the remote uuids, and so
the transport error would be displayed by it. It was also displayed when
eg, copying files to a remote that had no uuid yet.
sideAction is for things not generally related to the current action being
performed. And, it adds a newline after the side action. This was not the
right thing to use for stuff like "checksum", where doing a checksum is
part of the git annex get process, and indeed we want it to display
"(checksum...) ok"
/dev/null stderr; ssh is still able to display a password prompt
despite this
Show some messages so the user knows it's locking a remote, and
knows if that locking failed.
Also, rename lockContent to lockContentExclusive
inAnnexSafe should perhaps be eliminated, and instead use
`lockContentShared inAnnex`. However, I'm waiting on that, as there are
only 2 call sites for inAnnexSafe and it's fiddly.
In c6632ee5c8, it actually only handled
uploading objects to a shared repository. To avoid verification when
downloading objects from a shared repository, was a lot harder.
On the plus side, if the process of downloading a file from a remote
is able to verify its content on the side, the remote can indicate this
now, and avoid the extra post-download verification.
As of yet, I don't have any remotes (except Git) using this ability.
Some more work would be needed to support it in special remotes.
It would make sense for tahoe to implicitly verify things downloaded from it;
as long as you trust your tahoe server (which typically runs locally),
there's cryptographic integrity. OTOH, despite bup being based on shas,
a bup repo under an attacker's control could have the git ref used for an
object changed, and so a bup repo shouldn't implicitly verify. Indeed,
tahoe seems unique in being trustworthy enough to implicitly verify.
* When annex objects are received into git repositories, their checksums are
verified then too.
* To get the old, faster, behavior of not verifying checksums, set
annex.verify=false, or remote.<name>.annex-verify=false.
* setkey, rekey: These commands also now verify that the provided file
matches the key, unless annex.verify=false.
* reinject: Already verified content; this can now be disabled by
setting annex.verify=false.
recvkey and reinject already did verification, so removed now duplicate
code from them. fsck still does its own verification, which is ok since it
does not use getViaTmp, so verification doesn't happen twice when using fsck
--from.
Since I want git-annex to keep building on debian stable, I need to still
support the old http-client, which required explicit calls to
closeManager, or use of withManager to get Managers to close at appropriate
times. This is not needed in the new version, and so they added a
deprecation warning. IMHO much too early, because look at the mess I had to
go through to avoid that deprecation warning while supporting both
versions..
Added support for storageclass=STANDARD_IA to use Amazon's
new Infrequently Accessed storage.
Also allows using storageclass=NEARLINE to use Google's NearLine storage.
The necessary changes to aws to support this are in
https://github.com/aristidb/aws/pull/176
When gpg.program is configured, it's used to get the command to run for
gpg. Useful on systems that have only a gpg2 command or want to use it
instead of the gpg command.
This only makes sense for public repos, that are not chunked, so
that there's a 1:1 from Key in the git-annex repo to file on the remote.
Rather than making every remote implementation deal with that, just disable
whereisKey when it doesn't make sense.
Note that, if an url is added to the web log for such a remote, it's not
distinguishable from another url that might be added for the web remote.
(Because the web log doesn't distinguish which remote owns a plain url.
Urls with a downloader set are distinguishable, but we're not using them
here.)
This seems ok-ish.. In such a case, both remotes will try to use both
urls, and both remotes should be able to.
The only issue I see is that dropping a file from the web remote will
remove both urls in this case. This is not often done, and could even
be considered a feature, I suppose.
Note that I had one in Annex.Action.startup too, but it resulted in a weird
message printed by ssh, "channel 2: bad ext data". I don't know why, but
it only happened when transferinfo was run, so I wonder
if 983a95f021 introduced a fragility somehow.
While cryptohash has SHA3 support, it has not been updated for the final
version of the spec. Note that cryptonite has not been ported to all arches
that cryptohash builds on yet.
Now it suffices to run git remote add, followed by git-annex sync. Now the
remote is automatically initialized for use by git-annex, where before the
git-annex branch had to manually be pushed before using git-annex sync.
Note that this involved changes to git-annex-shell, so if the remote is
using an old version, the manual push is still needed.
Implementation required git-annex-shell be changed, so configlist can
autoinit a repository even when no git-annex branch has been pushed yet.
Unfortunate because we'll have to wait for it to get deployed to servers
before being able to rely on this change in the documentation.
Did consider making git-annex sync push the git-annex branch to repos that
didn't have a uuid, but this seemed difficult to do without complicating it
in messy ways.
It would be cleaner to split a command out from configlist to handle
the initialization. But this is difficult without sacrificing backwards
compatability, for users of old git-annex versions which would not use the
new command.
"checkPresent baser" was wrong; the baser has a dummy checkPresent action
not the real one. So, to fix this, we need to call preparecheckpresent to
get a checkpresent action that can be used to check if chunks are present.
Note that, for remotes like S3, this means that the preparer is run,
which opens a S3 handle, that will be used for each checkpresent of a
chunk. That's a good thing; if we're resuming an upload that's already many
chunks in, it'll reuse that same http connection for each chunk it checks.
Still, it's not a perfectly ideal thing, since this is a different http
connection that the one that will be used to upload chunks. It would be
nice to improve the API so that both use the same http connection.
Note that it's possible for a S3 bucket to be configured to allow public
access, but for git-annex to not know that it is. I chose to not show the
url unless public=yes.
In my tests, this has to be set when uploading a file to the bucket
and then the file can be accessed using the bucketname.s3.amazonaws.com
url.
Setting it when creating the bucket didn't seem to make the whole bucket
public, or allow accessing files stored in it. But I have gone ahead and
also sent it when creating the bucket just in case that is needed in some
case.
This removes a bit of complexity, and should make things faster
(avoids tokenizing Params string), and probably involve less garbage
collection.
In a few places, it was useful to use Params to avoid needing a list,
but that is easily avoided.
Problems noticed while doing this conversion:
* Some uses of Params "oneword" which was entirely unnecessary
overhead.
* A few places that built up a list of parameters with ++
and then used Params to split it!
Test suite passes.
This is especially useful because the caller doesn't need to generate valid
url keys, which involves some escaping of characters, and may involve
taking a md5sum of the url if it's too long.
The one exception is in Utility.Daemon. As long as a process only
daemonizes once, which seems reasonable, and as long as it avoids calling
checkDaemon once it's already running as a daemon, the fcntl locking
gotchas won't be a problem there.
Annex.LockFile has it's own separate lock pool layer, which has been
renamed to LockCache. This is a persistent cache of locks that persist
until closed.
This is not quite done; lockContent stil needs to be converted.
Only the assistant uses these, and only the assistant cleans them up, so
make only git annex transferkeys write them,
There is one behavior change from this. If glacier is being used, and a
manual git annex get --from glacier fails because the file isn't available
yet, the assistant will no longer later see that failed transfer file and
retry the get. Hope no-one depended on that old behavior.
I've tested all the dataenc to sandi conversions except Assistant.XMPP,
and all have unchanged behavior, including behavior on large unicode code
points.
For example, it failed to get files from a bucket named S3.
Also fixes `git annex initremote UPPERCASE type=S3`, which failed with the
new aws library, with a signing error message.
The directory special remote was not affected in its normal configuration,
since annex-directory is an absolute path normally. But it could fail
when a relative path was used.
The git remote was affected even when an absolute path to it was used in
.git/config, since git-annex now converts all such paths to relative.
It sounds worse than it is. ;)
Some external special remotes may run commands that display progress on
stderr. If git-annex is run with --quiet, this should filter out such
displays while letting the errors through.
Came up with a generic way to filter out progress messages while keeping
errors, for commands that use stderr for both.
--json mode will disable command outputs too.
Useful for things like ipfs that don't use regular urls.
An external special remote can add a regular url to a key, and then
git-annex get will download it from the web. But for ipfs, we want to
instead tell git-annex that the uri uses OtherDownloader. Before this
change, the external special remote protocol lacked a way to do that.
The fix is to stop using w82s, which does not properly reconstitute unicode
strings. Instrad, use utf8 bytestring to get the [Word8] to base64. This
passes unicode through perfectly, including any invalid filesystem encoded
characters.
Note that toB64 / fromB64 are also used for creds and cipher
embedding. It would be unfortunate if this change broke those uses.
For cipher embedding, note that ciphers can contain arbitrary bytes (should
really be using ByteString.Char8 there). Testing indicated it's not safe to
use the new fromB64 there; I think that characters were incorrectly
combined.
For credpair embedding, the username or password could contain unicode.
Before, that unicode would fail to round-trip through the b64.
So, I guess this is not going to break any embedded creds that worked
before.
This bug may have affected some creds before, and if so,
this change will not fix old ones, but should fix new ones at least.
Most of the time, there will be no discreprancy between programPath and
readProgramFile.
But, the programFile might have been written by an old version of git-annex
that is still installed, while a newer one is currently running. In this
case, we want to run the same one that's currently running.
This is especially important for things like the GIT_SSH=git-annex used for
ssh connection caching.
The only code that still uses readProgramFile directly is the upgrade code,
which needs to know where the standalone git-annex was installed, in order to
upgrade it.
Avoid using fileSize which maxes out at just 2 gb on Windows.
Instead, use hFileSize, which doesn't have a bounded size.
Fixes support for files > 2 gb on Windows.
Note that the InodeCache code only needs to compare a file size,
so it doesn't matter it the file size wraps. So it has been
left as-is. This was necessary both to avoid invalidating existing inode
caches, and because the code passed FileStatus around and would have become
more expensive if it called getFileSize.
This commit was sponsored by Christian Dietrich.
* info: Can now display info about a given uuid.
* Added to remote/uuid info: Count of the number of keys present
on the remote, and their size. This is rather expensive to calculate,
so comes last and --fast will disable it.
* Git remote info now includes the date of the last sync with the remote.
Reverts 965e106f24
Unfortunately, this caused breakage on Windows, and possibly elsewhere,
because parentDir and takeDirectory do not behave the same when there is a
trailing directory separator.
parentDir is less safe than takeDirectory, especially when working
with relative FilePaths. It's really only useful in loops that
want to terminate at /
This commit was sponsored by Audric SCHILTKNECHT.
addurl behavior change: When downloading an url ending in .torrent,
it will download files from bittorrent, instead of the old behavior
of adding the torrent file to the repository.
Added Recommends on aria2 and bittornado | bittorrent.
This commit was sponsored by Asbjørn Sloth Tønnesen.
This threw an unusual exception w/o an error message when probing to see if
the bucket exists yet. So rather than relying on tryS3, catch all
exceptions.
This does mean that it might get an exception for some transient network
error, think this means the bucket DNE yet, and try to create it, and then
fail when it already exists.
When uploading the last part of a file, which was 640229 bytes, S3 rejected
that part: "Your proposed upload is smaller than the minimum allowed size"
I don't know what the minimum is, but the fix is just to include the last
part into the previous part. Since this can result in a part that's
double-sized, use half-sized parts normally.
Unfortunately, I don't fully understand why it was leaking using the old
method of a lazy bytestring. I just know that it was leaking, despite
neither hGetUntilMetered nor byteStringPopper seeming to leak by
themselves.
The new method avoids the lazy bytestring, and simply reads chunks from the
handle and streams them out to the http socket.
Untested and not even compiled yet.
Testing should include checks that file content streams through without
buffering in memory.
Note that CL.consume causes all the etags to be buffered in memory.
This is probably nearly unavoidable, since a request has to be constructed
that contains the list of etags in its body. (While it might be possible to
stream generation of the body, that would entail making a http request that
dribbles out parts of the body as the multipart uploads complete, which is
not likely to work well..
To limit this being a problem, it's best for partsize to be set to some
suitably large value, like 1gb. Then a full terabyte file will need only
1024 etags to be stored, which will probably use around 1 mb of memory.
I'm a little stuck on getting the list of etags of the parts.
This seems to require taking the md5 of each part locally,
which doesn't get along well with lazily streaming in the part from the
file. It would need to read the file twice, or lose laziness and buffer a
whole part -- but parts might be quite large.
This seems to be a problem with the API provided; S3 is supposed to return
an etag, but that is not exposed. I have filed a bug:
https://github.com/aristidb/aws/issues/141
That and S3 are all that uses creds currently, except that external
remotes can use creds. I have not handled showing info about external
remote creds because they can have 0, 1, or more separate cred pairs, and
there's no way for info to enumerate them or know how they're used.
So it seems ok to leave out creds info for external remotes.
This is intended to let the user easily tell if a remote's creds are
coming from info embedded in the repository, or instead from the
environment, or perhaps are locally stored in a creds file.
This commit was sponsored by Frédéric Schütz.
Now `git annex info $remote` shows info specific to the type of the remote,
for example, it shows the rsync url.
Remote types that support encryption or chunking also include that in their
info.
This commit was sponsored by Ævar Arnfjörð Bjarmason.
Found these with:
git grep "^ " $(find -type f -name \*.hs) |grep -v ': where'
Unfortunately there is some inline hamlet that cannot use tabs for
indentation.
Also, Assistant/WebApp/Bootstrap3.hs is a copy of a module and so I'm
leaving it as-is.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
See 2f3c3aa01f for backstory about how a repo
could be in this state.
When decryption fails, the repo must be using non-encrypted creds. Note
that creds are encrypted/decrypted using the encryption cipher which is
stored in the repo, so the decryption cannot fail due to missing gpg keys
etc. (For !shared encryptiom, the cipher is iteself encrypted using some
gpg key(s), and the decryption of the cipher happens earlier, so not
affected by this change.
Print a warning message for !shared repos, and continue on using the
cipher. Wrote a page explaining what users hit by this bug should do.
This commit was sponsored by Samuel Tardieu.
encryptionSetup must be called before setRemoteCredPair. Otherwise,
the RemoteConfig doesn't have the cipher in it, and so no cipher is used to
encrypt the embedded creds.
This is a security fix for non-shared encryption methods!
For encryption=shared, there's no security problem, just an
inconsistentency in whether the embedded creds are encrypted.
This is very important to get right, so used some types to help ensure that
setRemoteCredPair is only run after encryptionSetup. Note that the external
special remote bypasses the type safety, since creds can be set after the
initial remote config, if the external special remote program requests it.
Also note that IA remotes never use encryption, so encryptionSetup is not
run for them at all, and again the type safety is bypassed.
This leaves two open questions:
1. What to do about S3 and glacier remotes that were set up
using encryption=pubkey/hybrid with embedcreds?
Such a git repo has a security hole embedded in it, and this needs to be
communicated to the user. Is the changelog enough?
2. enableremote won't work in such a repo, because git-annex will
try to decrypt the embedded creds, which are not encrypted, so fails.
This needs to be dealt with, especially for ecryption=shared repos,
which are not really broken, just inconsistently configured.
Noticing that problem for encryption=shared is what led to commit
fbdeeeed5f, which tried to
fix the problem by not decrypting the embedded creds.
This commit was sponsored by Josh Taylor.
This reverts commit fbdeeeed5f.
I can find no basis for that commit and think that I made it in error.
setRemoteCredPair always encrypts using the cipher from remoteCipher,
even when the cipher is shared.
* New annex.hardlink setting. Closes: #758593
* init: Automatically detect when a repository was cloned with --shared,
and set annex.hardlink=true, as well as marking the repository as
untrusted.
Had to reorganize Logs.Trust a bit to avoid a cycle between it and
Annex.Init.
This avoids cp -a overriding the default mode acls that the user might have
set in a git repository.
With GNU cp, this behavior change should not be a breaking change, because
git-anex also uses rsync sometimes in the same situation, and has only ever
preserved timestamps when using rsync.
Systems without GNU cp will no longer use cp -a, but instead just cp.
So, timestamps will no longer be preserved. Preserving timestamps when
copying between repos is not guaranteed anyway.
Closes: #729757
This fixed one bug where it needed to be and wasn't (in Assistant.Unused).
And also found one place where lockContent was used unnecessarily (by
drop --from remote).
A few other places like uninit probably don't really need to lockContent,
but it doesn't hurt to do call it anyway.
This commit was sponsored by David Wagner.
Also fixes a test suite failures introduced in recent commits, where
inAnnexSafe failed in indirect mode, since it tried to open the lock file
ReadWrite. This is why the new checkLocked opens it ReadOnly.
This commit was sponsored by Chad Horohoe.
Added a convenience Utility.LockFile that is not a windows/posix
portability shim, but still manages to cut down on the boilerplate around
locking.
This commit was sponsored by Johan Herland.
This does mean that eg, copying multiple files to a local remote will
become slightly slower, since it now restarts git-cat-file after each copy.
Should not be significant slowdown.
The reason git-cat-file is run on the remote at all is to update its
location log. In order to add an item to it, it needs to get the current
content of the log. Finding a way to avoid needing to do that would be a
good path to avoiding this slowdown if it does become a problem somehow.
This commit was sponsored by Evan Deaubl.
(With the exception of daemon pid locking.)
This fixes at part of #758630. I reproduced the assistant locking eg, a
removable drive's annex journal lock file and forking a long-running
git-cat-file process that inherited that lock.
This did not affect Windows.
Considered doing a portable Utility.LockFile layer, but git-annex uses
posix locks in several special ways that have no direct Windows equivilant,
and it seems like it would mostly be a complication.
This commit was sponsored by Protonet.
Since encryption=shared, the encryption key is stored in the git repo, so
there is no point at all in encrypting the creds, also stored in the git
repo with that key. So `initremote` doesn't. The creds are simply stored
base-64 encoded.
However, it then tried to always decrypt creds when encryption was used..
Added a mkUnavailable method, which a Remote can use to generate a version
of itself that is not available. Implemented for several, but not yet all
remotes.
This allows testing that checkPresent properly throws an exceptions when
it cannot check if a key is present or not. It also allows testing that the
other methods don't throw exceptions in these circumstances.
This immediately found several bugs, which this commit also fixes!
* git remotes using ssh accidentially had checkPresent return
an exception, rather than throwing it
* The chunking code accidentially returned False rather than
propigating an exception when there were no chunks and
checkPresent threw an exception for the non-chunked key.
This commit was sponsored by Carlo Matteo Capocasa.
Implemented the Retriever.
Unfortunately, it is a fileRetriever and not a byteRetriever.
It should be possible to convert this to a byteRetiever, but I got stuck:
The conduit sink needs to process individual chunks, but a byteRetriever
needs to pass a single L.ByteString to its callback for processing. I
looked into using unsafeInerlaveIO to build up the bytestring lazily,
but the sink is already operating under conduit's inversion of control,
and does not run directly in IO anyway.
On the plus side, no more memory leak..
Fixes the memory leak on store.. the second oldest open git-annex bug!
Only retrieve remains to be converted.
This commit was sponsored by Scott Robinson.
