See comment for analysis.
At first I thought I'd need to convert all T.unpack in git-annex, but
luckily not -- so long as the Text is read from a file, the filesystem
encoding is applied and T.unpack is fine. It's only when using Feed
that the filesystem encoding is not applied.
While this fixes the crash, it does result in some mojibake, eg:
itemid=http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-���-questions/
Have not tracked that down, but it must be unrelated, because
I've verified that it roundtrips when using encodeUf8:
joey@darkstar:~/src/git-annex>LANG=C ghci Utility/FileSystemEncoding.hs
ghci> useFileSystemEncoding
ghci> Just f <- Text.Feed.Import.parseFeedFromFile "/home/joey/tmp/career_tools_podcasts.xml"
ghci> Just (_, x) = Text.Feed.Query.getItemId (Text.Feed.Query.feedItems f !! 0)
ghci> decodeBS (Data.Text.Encoding.encodeUtf8 x)
"http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-\56546\56448\56467-questions/"
ghci> writeFile "foo" $ decodeBS (Data.Text.Encoding.encodeUtf8 x)
Writes a file containing the ENDASH character.
Sponsored-by: Jochen Bartl on Patreon
While intended for converting URL keys added by addurl --fast to be
as if added by addurl --relaxed, it can also be used to remove size
from other types of keys. Although that is not likely to be useful
for checksummed keys, I suppose it could be used for WORM or other
non-checksum keys.
Specifying the --remove-size option does not prevent other migrations
from taking effect if there's a key upgrade to perform, or if the
backend has changed. So --backend=URL needs to be used to prevent
migrating an URL key to the default backend.
Note that it's not possible to use git-annex migrate to convert from a
non-URL key to an URL key, as URL keys cannot be generated, except by
addurl. So while this can get the same effect as --relaxed would have
when addurl --fast was used, when --fast was not used, it won't work, or
if --backend=URL is not used will remove the size but not prevent
checksum verification, which is not useful. Due to this complexity, I
decided not to mention it in the git-annex addurl man page.
Sponsored-by: Jochen Bartl on Patreon
git-lfs: Fix interoperability with gitlab's implementation of the git-lfs
protocol, which requests Content-Encoding chunked.
Sponsored-by: Dartmouth College's Datalad project
* uninit: Avoid error message when no commits have been made to the
repository yet.
* uninit: Avoid error message when there is no git-annex branch.
Sponsored-by: Svenne Krap on Patreon
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
metadata --batch --json: Reject input whose "fields" does not consist of
arrays of strings. Such invalid input used to be silently ignored.
Used to be that parseJSON for a JSONActionItem ran parseJSON separately
for the itemAdded, and if that failed, did not propagate the error. That
allowed different items with differently named fields to be parsed.
But it was actually only used to parse "fields" for metadata, so that
flexability is not needed.
The fix is just to parse "fields" as-is. AddJSONActionItemFields is needed
only because of the wonky way Command.MetaData adds onto the started json
object.
Note that this line got a dummy type signature added,
just because the type checker needs it to be some type.
itemFields = Nothing :: Maybe Bool
Since it's Nothing, it doesn't really matter what type it is,
and the value gets turned into json and is then thrown away.
Sponsored-by: Kevin Mueller on Patreon
Turns out that CommandStart actions do not have their exceptions caught,
which is why the giveup was causing a crash. Mostly these actions
do not do very much work on their own, but it does seem possible there
are other commands whose CommandStart also throws an exception.
So, my first attempt at a fix was to catch those exceptions. But,
--json-error-messages then causes a difficulty, because in order to output
a json error message, an action needs to have been started; that sets up
the json object that the error message will be included in a field of.
While it would be possible to output an object with just an error field,
this would be json output of a format that the user has no reason to
expect, that happens only in an exceptional circumstance. That is something
I have always wanted to avoid with the json output; while git-annex man
pages don't document what the json looks like, the output has always
been made to be self-describing. Eg, it includes "error-messages":[]
even when there's no errors.
With that ruled out, it doesn't seem a good idea to catch CommandStart
exceptions and display the error to stderr when --json-error-messages
is set. And so I don't know if it makes sense to catch exceptions from that
at all. Maybe I'd have a different opinion if --json-error-messages did not
exist though.
So instead, output a blank line like other batch commands do.
This also leaves open the possibility of implementing support for matching
object with metadata --json, which would also want to output a blank line
when the input didn't match.
Sponsored-by: Dartmouth College's DANDI project
addurl: Support adding the same url to multiple files at the same time when
using -J with --batch --with-files.
Implementation was easier than expected, was able to reuse OnlyActionOn.
While it will download the url's content multiple times, that seems like
the best thing to do; see my comment for why.
Sponsored-by: Dartmouth College's DANDI project
This opens the potential for the object file to be in place but
git-annex is interrupted before it can freeze it. git-annex fsck already
fixes that situation, which can also occur when lockContentForRemoval
thaws content.
Also improve comment to not be Windows-specific.
Caused by dirContains ".." "foo" being incorrectly False.
Also added a test of dirContains, which includes all the previous bug fixes
I could find and some obvious cases.
Reversion in version 8.20211011
Sponsored-by: Brett Eisenberg on Patreon
Fix bug that caused stale git-annex branch information to read when
annex.private or remote.name.annex-private is set.
The private journal file should not prevent reading more current
information from the git-annex branch, but used to.
Note that, overBranchFileContents has to do additional work now, when
there's a private journal file, it reads from the branch redundantly
and more slowly.
Sponsored-by: Jack Hill on Patreon
This removes a messy caveat that was easy to forget and caused at least one
bug. The price paid is that, after a write to a MultiWriter db, it has to
close the db connection that it had been using to read, and open a new
connection. So it might be a little bit slower. But, writes are usually
batched together, so there's often only a single write, and so there should
not be much of a slowdown. Notice that SingleWriter already closed the db
connection after a write, so paid the same overhead.
This is the second try at fixing a bug: git-annex get when run as the first
git-annex command in a new repo did not populate all unlocked files.
(Reversion in version 8.20210621)
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Rather than the error that occurred when trying to download the unchunked
content, which is less likely to actually be stored in the remote.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
git does not crash when there's a remote configured for a user who does
not exist, and this prevents git-annex from crashing too. Consider that
a user might exist on one system but not another, and the git repo be
moved between systems. So not crashing is desirable.
Note that git fetch seems to mishandle a remote path like ~foo/bar
when the user does not exist. While it does access ./~foo/bar,
and gets as far as running git-upload-pack on the path,
it then complains there is no such repo. So different parts of git seem
to be doing different things in that edge case. Anyway, git-annex does
not need to be bug-for-bug compatible with git.
Sponsored-by: Jack Hill on Patreon
test: Put gpg temp home directory in system temp directory, not filesystem
being tested.
Since I've found indications gpg can fail talking to the agent when the
socket ends up on eg, fat. And to hopefully fix this bug report I've
followed up on.
The main risk in using the system temp dir is that TMPDIR could be set to a
long directory path, which is too long to put a unix socket in. To
partially amelorate that risk, it uses either an absolute or a relative
path, whichever is shorter. (Hopefully gpg will not convert it to a longer
form of the path..)
If the user sets TMPDIR to something so long a path to it +
"S.gpg-agent" is too long, I suppose that's their issue to deal with.
Sponsored-by: Dartmouth College's Datalad project
This negotiation is not supported by versions of git-annex older
than 6.20180312. Well, maybe really 6.20180227 or so, but using that in
the changelog simplifies things since it was the version for the other
changes as well.
See commit c81768d425 for the back story.
As well as allowing for future protocol improvements, this will result
in negoatiating protocol version 1, which is an improvement over default
version 0.
In fact, it looks like no supported version of git-annex will use
protocol version 0, since version 1 was introduced in 6.20180227.
Still, removing the code for version 0 seems unncessary.
See commit 31e1adc005.
Sponsored-by: Brett Eisenberg on Patreon.
* Removed support for accessing git remotes that use versions of
git-annex older than 6.20180312.
* git-annex-shell: Removed several commands that were only needed to
support git-annex versions older than 6.20180312.
(lockcontent, recvkey, sendkey, transferinfo, commit)
The P2P protocol was added in that version, and used ever since, so
this code was only needed for interop with older versions.
"git-annex-shell commit" is used by newer git-annex versions, though
unnecessarily so, because the p2pstdio command makes a single commit at
shutdown. Luckily, it was run with stderr and stdout sent to /dev/null,
and non-zero exit status or other exceptions are caught and ignored. So,
that was able to be removed from git-annex-shell too.
git-annex-shell inannex, recvkey, sendkey, and dropkey are still used by
gcrypt special remotes accessed over ssh, so those had to be kept.
It would probably be possible to convert that to using the P2P protocol,
but it would be another multi-year transition.
Some git-annex-shell fields were able to be removed. I hoped to remove
all of them, and the very concept of them, but unfortunately autoinit
is used by git-annex sync, and gcrypt uses remoteuuid.
The main win here is really in Remote.Git, removing piles of hairy fallback
code.
Sponsored-by: Luke Shumaker
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
When the progress display gets longer, and then shorter again, it causes
the cursor to jitter back and forth. Somehow I never noticed this until
this morning, but then it became intolerable to watch.
To fix it, pad the progress display to the maximum length it's occupied.
Sponsored-by: Svenne Krap on Patreon
This adds the overhead of a copy whenever converting to/from ExportLocation and
ImportLocation.
borg: Some improvements to memory use when importing a lot of archives.
(It's still pretty bad.)
Sponsored-by: Mark Reidenbach on Patreon
Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
sync --content: Avoid a redundant checksum of a file that was
incrementally verified, when used on NTFS and perhaps other filesystems.
When sync has just gotten the content, it does not need to check inAnnex a
second time. On NTFS, for some reason the write of the inode cache after
it gets the content is not immediately able to be read, and with an
empty/non-matching inode cache due to that stale data, inAnnex falls back
to hashing the whole object to determine if it's present.
Sponsored-by: Brock Spratlen on Patreon
This method avoids breaking test_readonly. Just check if the dest file
exists, and avoid CoW probing when it does, so when CoW probing fails,
it can resume where the previous non-CoW copy left off.
If CoW has been probed already to work, delete the dest file
since a CoW copy will presumably work. It seems like it would be almost
as good to just skip CoW copying in this case too, but consider that the
dest file might have started to be copied from some other remote, not
using CoW, but CoW has been probed to work to copy from the current
place.
Sponsored-by: Dartmouth College's Datalad project
commit 63d508e885 broke test_readonly.
When a local git remote is readonly, tryCopyCoW run to copy a file
from it failed at withOtherTmp.
Sponsored-by: Dartmouth College's Datalad project
Disabling git-annex branch update for this command is
ok, because it does not use any information from the branch,
but only logs the location when it adds a key.
Sponsored-by: Dartmouth College's Datalad project
New method is much better. Avoids unrestrained transfer at the beginning
(except for the first block. Keeps right at or a few kb/s below the
configured limit, with very little varation in the actual reported bandwidth.
Removed the /s part of the config as it's not needed.
Ready to merge.
Sponsored-by: Luke Shumaker on Patreon
Bug fix: Git configs such as annex.verify were incorrectly overriding
per-remote git configs such as remote.name.annex-verify.
This dates all the way back to 2013,
commit 8a5b397ac4,
where hlint apparently somehow confused me into parsing in the wrong
order. Before that it was correct.
Amazing noone has noticed until now.
Sponsored-by: Kevin Mueller on Patreon
Probably this fixes a reversion, but I don't know what version broke it.
This does use withOtherTmp for a temp file that could be quite large.
Though albeit a reflink copy that will not actually take up any space
as long as the file it was copied from still exists. So if the copy cow
succeeds but git-annex is interrupted just before that temp file gets
renamed into the usual .git/annex/tmp/ location, there is a risk that
the other temp directory ends up cluttered with a larger temp file than
later. It will eventually be cleaned up, and the changes of this being
a problem are small, so this seems like an acceptable thing to do.
Sponsored-by: Shae Erisson on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
This should complete the fix started in
6329997ac4, fixing the actual cause of the
test suite failure this time.
Sponsored-by: Dartmouth College's Datalad project
* When downloading urls fail, explain which urls failed for which
reasons.
* web: Avoid displaying a warning when downloading one url failed
but another url later succeeded.
Some other uses of downloadUrl use urls that are effectively internal use,
and should not all be displayed to the user on failure. Eg, Remote.Git
tries different urls where content could be located depending on how the
remote repo is set up. Exposing those urls to the user would lead to wild
goose chases. So had to parameterize it to control whether it displays urls
or not.
A side effect of this change is that when there are some youtube urls
and some regular urls, it will try regular urls first, even if the
youtube urls are listed first. This seems like an improvement if
anything, but in any case there's no defined order of urls that it's
supposed to use.
Sponsored-by: Dartmouth College's Datalad project
And fail with an informative message.
I don't think ACLs can prevent removing the write bit, but I'm not sure,
so kept it mentioning them as a possibility.
Should git-annex lock also check if the write bits are able to be removed?
Maybe, but the case I know about with xattrs involves cp -a copying NFS
xattrs, and it's the copy of the file that is the problem. So when locking
a file, I guess it will not be the copy.
Sponsored-by: Dartmouth College's Datalad project
New --batch-keys option added to these commands: get, drop, move, copy, whereis
git-annex-matching-options had to be reworded since some of its options
can be used to match on keys, not only files.
Sponsored-by: Luke Shumaker on Patreon
It would be better if the Arbitrary instance avoided generating impossible
filenames like "foo/c:bar", but proably this is the only place that splits
the file from the directory and then uses the file without the directory..
At least on the quickcheck properties.
Sponsored-by: Svenne Krap on Patreon
This was unlikely to cause any problem, but it is unsightly to mention
normally hidden refs, and it might have done a bit of unnecessary work to
check that ref.
Sponsored-by: Noam Kremen on Patreon
And that should be all the special remotes supporting it on linux now,
except for in the odd edge case here and there.
Sponsored-by: Dartmouth College's DANDI project
Except when configuration makes curl be used. It did not seem worth
trying to tail the file when curl is downloading.
But when an interrupted download is resumed, it does not read the whole
existing file to hash it. Same reason discussed in
commit 7eb3742e4b76d1d7a487c2c53bf25cda4ee5df43; that could take a long
time with no progress being displayed. And also there's an open http
request, which needs to be consumed; taking a long time to hash the file
might cause it to time out.
Also in passing implemented it for git and external special remotes when
downloading from the web. Several others like S3 are within striking
distance now as well.
Sponsored-by: Dartmouth College's DANDI project
Added fileRetriever', which will let the remaining special remotes
eventually also support incremental verify.
Sponsored-by: Dartmouth College's DANDI project
It uses tailVerify to hash the file while it's being written.
This is able to sometimes avoid a separate checksum step. Although
if the file gets written quickly enough, tailVerify may not see it
get created before the write finishes, and the checksum still happens.
Testing with the directory special remote, incremental checksumming did
not happen. But then I disabled the copy CoW probing, and it did work.
What's going on with that is the CoW probe creates an empty file on
failure, then deletes it, and then the file is created again. tailVerify
will open the first, empty file, and so fails to read the content that
gets written to the file that replaces it.
The directory special remote really ought to be able to avoid needing to
use tailVerify, and while other special remotes could do things that
cause similar problems, they probably don't. And if they do, it just
means the checksum doesn't get done incrementally.
Sponsored-by: Dartmouth College's DANDI project
Simply feed each chunk in turn to the incremental verifier.
When resuming an interrupted retrieve, it does not do incremental
verification. That would need to read the file, up to the resume point,
and feed it to the incremental verifier. That seems easy to get wrong.
Also it would mean extra work done before the transfer can start. Which
would complicate displaying progress, and would perhaps not appear to the
user as if it was resuming from where it left off. Instead, in that
situation, return UnVerified, and let the verification be done in a
separate pass.
Granted, Annex.CopyFile does manage all that, but it's not complicated
by dealing with chunks too.
Sponsored-by: Dartmouth College's DANDI project
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
* Deal with clock skew, both forwards and backwards, when logging
information to the git-annex branch.
* GIT_ANNEX_VECTOR_CLOCK can now be set to a fixed value (eg 1)
rather than needing to be advanced each time a new change is made.
* Misuse of GIT_ANNEX_VECTOR_CLOCK will no longer confuse git-annex.
When changing a file in the git-annex branch, the vector clock to use is now
determined by first looking at the current time (or GIT_ANNEX_VECTOR_CLOCK
when set), and comparing it to the newest vector clock already in use in
that file. If a newer time stamp was already in use, advance it forward by
a second instead.
When the clock is set to a time in the past, this avoids logging with
an old timestamp, which would risk that log line later being ignored in favor
of "newer" line that is really not newer.
When a log entry has been made with a clock that was set far ahead in the
future, this avoids newer information being logged with an older timestamp
and so being ignored in favor of that future-timestamped information.
Once all clocks get fixed, this will result in the vector clocks being
incremented, until finally enough time has passed that time gets back ahead
of the vector clock value, and then it will return to usual operation.
(This latter situation is not ideal, but it seems the best that can be done.
The issue with it is, since all writers will be incrementing the last
vector clock they saw, there's no way to tell when one writer made a write
significantly later in time than another, so the earlier write might
arbitrarily be picked when merging. This problem is why git-annex uses
timestamps in the first place, rather than pure vector clocks.)
Advancing forward by 1 second is somewhat arbitrary. setDead
advances a timestamp by just 1 picosecond, and the vector clock could
too. But then it would interfere with setDead, which wants to be
overrulled by any change. So it could use 2 picoseconds or something,
but that seems weird. It could just as well advance it forward by a
minute or whatever, but then it would be harder for real time to catch
up with the vector clock when forward clock slew had happened.
A complication is that many log files contain several different peices of
information, and it may be best to only use vector clocks for the same peice
of information. For example, a key's location log file contains
InfoPresent/InfoMissing for each UUID, and it only looks at the vector
clocks for the UUID that is being changed, and not other UUIDs.
Although exactly where the dividing line is can be hard to determine.
Consider metadata logs, where a field "tag" can have multiple values set
at different times. Should it advance forward past the last tag?
Probably. What about when a different field is set, should it look at
the clocks of other fields? Perhaps not, but currently it does, and
this does not seems like it will cause any problems.
Another one I'm not entirely sure about is the export log, which is
keyed by (fromuuid, touuid). So if multiple repos are exporting to the
same remote, different vector clocks can be used for that remote.
It looks like that's probably ok, because it does not try to determine
what order things occurred when there was an export conflict.
Sponsored-by: Jochen Bartl on Patreon
git-annex get when run as the first git-annex command in a new repo did not
populate unlocked files. (Reversion in version 8.20210621)
I am not entirely happy with this, because I don't understand how
428c91606b caused the problem in the first
place, and I don't fully understand how skipping calling scanAnnexedFiles
during autoinit avoids the problem.
Kept the explicit call to scanAnnexedFiles during git-annex init,
so that when reconcileStaged is expensive, it can be made to run then,
rather than at some later point when the information is needed.
Sponsored-by: Brock Spratlen on Patreon
Eg, showImprecise 1 1.99 returned "1.1" rather than "2". The 9 rounded
upward to 10, and that was wrongly used as the decimal, rather than
carrying the 1.
Sponsored-by: Jack Hill on Patreon
An easy way to see this in action is to have an unlocked file, and touch the
object file.
While all code that compares inode caches for object files needs to be
prepared for this kind of problem and fall back to verification, having
fsck notice it and correct it is cheap (as long as fsck is being run
anyway) and ensures that if it happens for some unusual reason, there's a
way for the user to notice that it's happening.
Not that, when annex.thin is in use, the earlier call to isUnmodified
(and also potentially earlier calls to inAnnex in eg, verifyLocationLog)
will fix up the same problem silently. That might prevent the warning
being displayed, although probably it still will be, because the
Database.Keys write of the InodeCache will be queued but will not have
happened yet. I can't see a way to improve this, but it's not great.
Sponsored-by: Dartmouth College's Datalad project
This is a result of an audit of every use of getInodeCaches,
to find places that misbehave when the annex object is not in the inode
cache, despite pointer files for the same key being in the inode cache.
Unfortunately, that is the case for objects that were in v7 repos that
upgraded to v8. Added a note about this gotcha to getInodeCaches.
Database.Keys.reconcileStaged, then annex.thin is set, would fail to
populate pointer files in this situation. Changed it to check if the
annex object is unmodified the same way inAnnex does, falling back to a
checksum if the inode cache is not recorded.
Sponsored-by: Dartmouth College's Datalad project
Fix bug that caused some transfers to incorrectly fail with "content
changed while it was being sent", when the content was not changed.
While I don't know how to reproduce the problem that several people
reported, it is presumably due to the inode cache somehow being stale.
So check isUnmodified', and if it's not modified, include the file's
current inode cache in the set to accept, when checking for modification
after the transfer.
That seems like the right thing to do for another reason: The failure
says the file changed while it was being sent, but if the object file was
changed before the transfer started, that's wrong. So it needs to check
before allowing the transfer at all if the file is modified.
(Other calls to sameInodeCache or elemInodeCaches, when operating on inode
caches from the database, could also be problimatic if the inode cache is
somehow getting stale. This does not address such problems.)
Sponsored-by: Dartmouth College's Datalad project
Which is the same as the git merge option.
After last commit, this turns out to be needed in the test suite, and when
doing git-annex import from special remote, followed by a git-annex merge.
Sponsored-by: Svenne Krap on Patreon
sync, merge, post-receive: Avoid merging unrelated histories, which used to
be allowed only to support direct mode repositories.
(However, sync does still merge unrelated histories when importing trees
from special remotes, and the assistant still merges unrelated histories
always.)
See 556b2ded2b for why this was added
back in 2016, for direct mode.
This is a behavior change, which might break something that was relying
on sync merging unrelated histories, but git had a good reason to
prevent it, since it's easy to foot shoot with it, and git-annex should
follow suit.
Sponsored-by: Noam Kremen on Patreon
* sync: When --quiet is used, run git commit, push, and pull without
their ususual output.
* merge: When --quiet is used, run git merge without its usual output.
This might also make --quiet work better for some other commands
that make commits, like git-annex adjust.
Sponsored-by: Kevin Mueller on Patreon
It was making the borgrepo path absolute.. even when it was a ssh
repository.
Made BorgRepo a newtype, to guard against accidentially treating it like a
FilePath.
Sponsored-by: Graham Spencer on Patreon
Fix a bug that prevented getting content from a repository that started out
as a bare repository, or had annex.crippledfilesystem set, and was
converted to a non-bare repository.
This unfortunately means that inAnnex check gets slowed down by a stat call
in normal repos when the content is not present. Oh well, such is the cost
of backwards compatability with old mistakes.
Sponsored-by: Mark Reidenbach on Patreon
assistant: When adding non-large files to git, honor annex.delayadd
configuration.
Also, don't add non-large files to git when they are still
being written to. This came for free, since the changes to non-large
files get queued up with the ones to large files, and run through the lsof
check.
Sponsored-by: Luke Shumaker on Patreon
init: Fix misbehavior when core.sharedRepository = group that caused it to
enter an adjusted branch. (Reversion in version 8.20210630)
Commit 4b1b9d7a83 made init call
freezeContent in case there was a hook that could prevent writing in
situations where perms don't. But with the above git config, freezeContent
does not prevent write at all. So init needs to do what freezeContent does
with a non-shared git config.
Or init could check for that config, and skip the probing, since it
won't actually be preventing write to any files. But that would make init
too aware if details of Annex.Perms, and also would break if the git config
were changed after init.
Sponsored-by: Dartmouth College's Datalad project
In commit dfc4e641b5 git repair was changed
to use remote name, not url, when fetching. But it fetches into a temporary
git repo, which doesn't have remotes configured. Oops.
(In my defense, that commit was made just as covid lockdown started. But
testing? Urk.)
Sponsored-by: Mark Reidenbach on Patreon
Fixed bug that interrupting git-annex repair (or assistant) while it was
fixing repository corruption would lose objects that were contained in pack
files.
Unpack all pack files and move objects into place *before* deleting the
pack files. The old approach moved the pack files to a temp directory
before unpacking them, which was not interruption safe.
Sponsored-By: Jochen Bartl on Patreon
Forces eg, download with youtube-dl without falling back to raw download.
Since youtube-dl failing due to an url not being supported is difficult to
distinguish from it failing due to being blocked in some way, this can be
useful to avoid the fallback of git-annex downloading the raw web page and
adding that.
Since --raw also prevents using special remotes, --no-raw also
allows special remote downloads. Although it's always possible that some
special remote may claim an url and fall back to raw download of the
content, which --no-raw cannot prevent.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Dropping an object with drop --unused or dropunused will mark it as
dead, preventing fsck --all from complaining about it after it's been
dropped from all repositories.
If another repository still has a copy, it won't be treated as dead
until it's also dropped from there.
The drop has to use --unused, can't be --key or something else, because
this indicates that the user has recently ran git-annex unused. If it
checked the unused log on every drop, bad things would happen when the
unused log was out of date, eg a file used to be unused but then got
re-added. Marking such a file as dead could be confusing. When the user
uses --unused/dropunused, they must consider the unused information to be
up-to-date.
The particular workflow this enables is:
git annex add foo
git annex unannex foo
git annex unused
git annex drop --unused / dropunused
git annex fsck --all # no warnings
The docs for git-annex unannex say to use git-annex unused and dropunused,
so the user should be pointed in this direction when they want to undo an
accidental add.
Sponsored-by: Brock Spratlen on Patreon
Transfers from or to a local git repo could fail without a reason being
given, if the content failed to verify, or if the object file's stat
changed while it was being copied. Now display messages in these cases.
Sponsored-by: Jack Hill on Patreon
Freeze first sets the file perms, and then runs
freezecontent-command. Thaw runs thawcontent-command before
restoring file permissions. This is in case the freeze command
prevents changing file perms, as eg setting a file immutable does.
Also, changing file perms tends to mess up previously set ACLs.
git-annex init's probe for crippled filesystem uses them, so if file perms
don't work, but freezecontent-command manages to prevent write to a file,
it won't treat the filesystem as crippled.
When the the filesystem has been probed as crippled, the hooks are not
used, because there seems to be no point then; git-annex won't be relying
on locking annex objects down. Also, this avoids them being run when the
file perms have not been changed, in case they somehow rely on
git-annex's setting of the file perms in order to work.
Sponsored-by: Dartmouth College's Datalad project
sync: Partly work around github behavior that first branch to be pushed to
a new repository is assumed to be the head branch, by not pushing
synced/git-annex first.
github expects master (or whatever the name is) to be pushed first, but
git-annex sync can't, because it's got to also support pushes to non-bare
repos where pushing master fails, as explained in the big comment. So
pushing synced/master is not entirely a fix, but at least it makes github
default to a branch with the stuff the user expects in it, not a bunch of
annex log files.
Aside from fixing github to not make this assumption, or improving
the git push protocol to include what the current HEAD is, the only other
approach I can think of is to identify git push's progress messages and
display those when pushing master, while filtering out error messages
about non-fast-forward etc. But git doesn't provide a way to separate out
or identify its progress messages.
Sponsored-by: Luke Shumaker on Patreon
Eg, before with a .gitattributes like:
*.2 annex.numcopies=2
*.1 annex.numcopies=1
And foo.1 and foo.2 having the same content and key, git-annex drop foo.1 foo.2
would succeed, leaving just 1 copy, despite foo.2 needing 2 copies.
It dropped foo.1 first and then skipped foo.2 since its content was gone.
Now that the keys database includes locked files, this longstanding wart
can be fixed.
Sponsored-by: Noam Kremen on Patreon
Most of this is just refactoring. But, handleDropsFrom
did not verify that associated files from the keys db were still
accurate, and has now been fixed to.
A minor improvement to this would be to avoid calling catKeyFile
twice on the same file, when getting the numcopies and mincopies value,
in the common case where the same file has the highest value for both.
But, it avoids checking every associated file, so it will scale well to
lots of dups already.
Sponsored-by: Kevin Mueller on Patreon
This was an old problem when the files were being added unlocked,
so the changelog mentions that being fixed. However, recently it's also
affected locked files.
The fix for locked files is kind of stupidly simple. moveAnnex already
handles populating unlocked files, and only does it when the object file
was not already present. So remove the redundant populateUnlockedFiles
call. (That call was added all the way back in
cfaac52b88, and has always been
unncessary.)
Sponsored-by: Dartmouth College's Datalad project
When the log has an activity that is not known, eg added by a future
version of git-annex, it used to be treated as no activity at all,
which would make git-annex expire think it should expire the repository,
despite it having some kind of recent activity.
Hopefully there will be no reason to add a new activity until enough
time has passed that this commit is in use everywhere.
Sponsored-by: Jake Vosloo on Patreon
When this option is not used, there should be effectively no added
overhead, thanks to the optimisation in
b3cd0cc6ba.
When an action fails on a file, the size of the file still counts toward
the size limit. This was necessary to support concurrency, but also
generally seems like the right choice.
Most commands that operate on annexed files support the option.
export and import do not, and I don't know if it would make sense for
export to.. Why would you want an incomplete export? sync doesn't, and
while it would be easy to make it support it for transferring files,
it's not clear if dropping files should also take the size limit into
account. Commands like add that don't operate on annexed files don't
support the option either.
Exiting 101 not yet implemented.
Sponsored-by: Denis Dzyubenko on Patreon
The normalisation of filenames turns out to be the tricky part here,
because the associated files coming out of the keys db may look like
"./foo/bar" or "../bar". For the former to match a glob like "foo/*",
it needs to be normalised.
Note that, on windows, normalise "./foo/bar" = "foo\\bar"
which a glob like "foo/*" won't match. So the glob is matched a second
time, on the toInternalGitPath, so allowing the user to provide a glob
with the slashes in either direction. However, this still won't support
some wacky edge cases like the user providing a glob of "foo/bar\\*"
Sponsored-by: Dartmouth College's Datalad project
When two files have the same content, and a required content expression
matches one but not the other, dropping the latter file will fail as it
would also remove the content of the required file.
This will slow down drop (w/o --auto), dropunused, mirror, and move, by one
keys db lookup per file. But I did include an optimisation to avoid a
double db lookup in the drop --auto / sync --content case. I suspect that
dropunused could also use PreferredContentChecked True, but haven't
entirely thought it through and it's rarely used with enough files for the
optimisation to matter.
Sponsored-by: Dartmouth College's Datalad project
* drop: When two files have the same content, and a preferred content
expression matches one but not the other, do not drop the file.
* sync --content, assistant: Fix an edge case where a file that is not
preferred content did not get dropped.
The sync --content edge case is that handleDropsFrom loaded associated files
and used them without verifying that the information from the database was
not stale.
It seemed best to avoid changing --want-drop's behavior, this way when
debugging a preferred content expression with it, the files matched will
still reflect the expression. So added a note to the --want-drop documentation,
to make clear it may not behave identically to git-annex drop --auto.
While it would be possible to introspect the preferred content
expression to see if it matches on filenames, and only look up the
associated files when it does, it's generally fairly rare for 2 files to
have the same content, and the database lookup is already avoided when
there's only 1 file, so I did not implement that further optimisation.
Note that there are still some situations where the associated files
database does not get locked files recorded in it, which will prevent
this fix from working.
Sponsored-by: Dartmouth College's Datalad project
init: When annex.commitmessage is set, use that message for the commit
that creates the git-annex branch.
This will be used by filter-branch too, and it seems to make sense to let
annex.commitmessage affect it.
ghc 8.8.4 seems to have changed something that broke code that has been
successfully using forkProcess since 2012. Likely a change to GC internals.
Since forkProcess has never had clear documentation about how to
use it safely, avoid using it at all. Instead, when git-annex needs to
daemonize itself, re-run the git-annex command, in a new process group
and session.
This commit was sponsored by Luke Shumaker on Patreon.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
git-annex add was changed, when adding a small file, to remove the inode
cache for it. This is necessary to keep the recipe in
doc/tips/largefiles.mdwn for converting from annex to git working.
It also avoids bugs/case_where_using_pathspec_with_git-commit_leaves_s.mdwn
which the earlier try at this change introduced.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
fromkey: Create an unlocked file when used in an adjusted branch where the
file should be unlocked, or when configured by annex.addunlocked.
There is some overlap with code in Annex.Ingest, however it's not quite the
same because ingesting has a temp file with the content, where here the
content, if any, is in the annex object file. So it eg, makes sense for
Annex.Ingest to copy the execute mode of the content file, but it does not make
sense for fromkey to do that.
Also changed in passing to stage the file in git directly, rather than
using git add. One consequence of that is that if the file is gitignored,
it will still get added, rather than the old behavior:
The following paths are ignored by one of your .gitignore files:
ignored
hint: Use -f if you really want to add them.
hint: Turn this message off by running
hint: "git config advice.addIgnoredFile false"
git-annex: user error (xargs ["-0","git","--git-dir=.git","--work-tree=.","--literal-pathspecs","add","--"] exited 123)
That old behavior was a surprise to me, and so I consider it a bug, and doubt
anyone would have relied on it.
Note that, when on an --hide-missing branch, it is possible to fromkey a key
that is not present (needs --force). The annex link or pointer file still gets
written in this case. It doesn't seem to make any sense not to write it,
because then fromkey would not do anything useful in this case, and this way
the file can be committed and synced to master, and the branch re-adjusted to
hide the new missing file.
This commit was sponsored by Noam Kremen on Patreon.
Which could happen occasionally before when concurrency is enabled.
While not much of a problem when it did happen, better to avoid it. Also,
since it seems likely the gpg-agent sometimes fails in such a situation,
this makes it not happen when running a single git-annex command with
concurrency enabled.
This commit was sponsored by Jake Vosloo on Patreon.
I had been assuming that numcopies would be a larger or at most equal to
mincopies, so no need to check both. But users get confused and use configs
that don't really make sense, so make sure to handle mincopies being larger
than numcopies.
Also add something to the mincopies man page to discourage this
misconfiguration.
This commit was sponsored by Denis Dzyubenko on Patreon.
Which has otherwise been supported since 2019, but was missing from the
list of allowed repo-global configs.
Reordered the list to match the order in the git-annex-config man page, to
make them easy to cross-compare.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
* Fix bug that could make git-annex importfeed not see recently recorded
state when configured with annex.alwayscommit=false.
* importfeed: Made "checking known urls" phase run 12 times faster.
The massive speedup is because it no longer queries for metadata
accompanying each url. Instead it processes the whole git-annex branch and
checks all metadata files for feed item ids, and uses any it finds.
This could result in a behavior change, in an unlikely situation: If a feed
id is recorded in a key's metadata, but the url gets removed, the old code
would not see that item id and would re-download it if it finds an url for
it in a feed, while the new code will see the item id. I don't think
the old behavior was intentional, and it may be that the new behavior is
better. Not gonna worry about this.
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
When not using --all, precaching only gets triggered when the
command actually needs location logs, and so there's no speed hit there.
This is a minor speed hit for --all, because it precaches even when the
location log is not actually going to be used, and so checking the journal
is not necessary. It would have been possible to defer checking the journal
until the cache gets used. But that would complicate the usual Branch.get
code path with two different kinds of caches, and the speed hit is really
minimal. A better way to speed up --all, later, would be to avoid
precaching at all when the location log is not going to be used.
init: Fix a crash when the repo's was cloned from a repo that had an
adjusted branch checked out, and the origin remote is not named "origin".
The only other hardcoding of the name of origin is in:
- Upgrade.V2, which can be ignored probably
- Annex.Branch, which doesn't fail if it has some other name, but just
doesn't set up the git-annex branch with quite as linear a history in
that case.
directory: When cp supports reflinks, use it when getting content from a
directory special remote.
Not yet for imports from directory though, and not for store.
Note that, when it's chunked, using cp --reflink would not speed it up, and
when reflink was not supported, would unnecessarily write the chunk to a
file before reading it back in. So, only using a fileRetriever in the
NoChunks case is necessary to keep chunking fast.
fileCopier is told not to verify, because the special remote interface
does not yet support verification in passing. AFAICS, fileCopies can
never return False when not verifying so the added giveup should never
actually happen.
When downloading content from a remote, if the content is able to be
verified during the transfer, skip checksumming it a second time.
Note that in this case, the fsck output does not include "(checksum)"
which it does when the checksumming is done separately from the download.
This commit was sponsored by Brock Spratlen on Patreon.
When git-annex transferrer started up, and the journal contained something,
it would commit it to the git-annex branch. This caused excess commits to
the branch, in cases where normally several changes would be journalled and
committed together. That generated some excess git objects and was also
just noisy on stdout.
Since transferrer uses enableInteractiveBranchAccess, it does not need to
commit journalled changes, since the optimisation that avoids checking
the journal when reading from the branch is disabled for processes that
call that.
This commit was sponsored by Svenne Krap on Patreon.
persistent stopped using askLogFunc, and the thing to use is askLoggerIO
from monad-logger. Bumped the dep to the first version that contained that.
Note that the i386ancient build uses a newer monad-logger than 0.3.10,
so the new versioned dep should not break it, and presumably nothing else
either.
This commit was sponsored by Noam Kremen on Patreon.
Which generated unusual git trees that could confuse git merge,
since they incorrectly had 2 subtrees with the same name.
Root of the bug was a) not testing that at all! but also
b) confusing graftdirs, which contains eg "foo/bar" with
non-recursively read trees, which would contain eg "bar"
when reading a subtree of "foo".
It's worth noting that Annex.Import uses graftTree, but it really
shouldn't have needed to. Eg, when importing into foo/bar from a remote,
it's enough to generate a tree of foo/bar/x, foo/bar/y, and does not
include other files that are at the top of the master branch. It uses
graftTree, so it does include the other files, as well as the foo/bar
tree. git merge will do the same thing for both trees. With that said,
switching it away from graftTree would result in another import
generating a new commit that seems to delete files that were there in a
previous commit, so it probably has to keep using graftTree since it
used it before.
This commit was sponsored by Kevin Mueller on Patreon.
Note that a key with no size field that is hard linked will
result in listImportableContents reporting a file size of 0,
rather than the actual size of the file. One result is that
the progress meter when getting the file will seem to get stuck
at 100%. Another is that the remote's preferred content expression,
if it tries to match against file size, will treat it as an empty file.
I don't see a way to improve the latter behavior, and the former behavior
is a minor enough problem.
This commit was sponsored by Jake Vosloo on Patreon.
Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
It changed parseOnly in the ByteString.Lazy module to take a lazy, not
strict ByteString. In all these cases though, we actually had a strict
ByteString, so the most efficient fix, which also happens to avoid needing
ifdefs, is to use the non-lazy module instead.
This commit was sponsored by Denis Dzyubenko on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Can beet to false to avoid some expensive things needed to support unlocked
files.
See my comment for why this only controls what init sets up, and not other
behavior.
I didn't bother with making the v5 upgrade code path look at this, though
it easily could, because the docs say to run git-annex init after setting
it to make it take effect.
I don't think this was really intentional behavior. It may be that it was
useful to include it so it could be passed to rmurl, since without it rmurl
would not actually remove the url. Since that was changed earlier today,
now seems like a good time to clean up the display of these urls.
This commit was sponsored by Jochen Bartl on Patreon.
fsck: When --from is used in combination with --all or similar options, do
not verify required content, which can't be checked properly when operating
on keys.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
box.com already had a special case, since its renaming was known buggy.
In its case, renaming to the temp file succeeds, but then renaming the temp
file to final destination fails.
Then this 4shared server has buggy handling of renames across directories.
While already worked around with for the temp files when storing exports
now being in the same directory as the final filename, that also affected
renameExport when the file moves between directories.
I'm not entirely clear what happens on the 4shared server when it fails
this way. It kind of looks like it may rename the file to destination and
then still fail.
To handle both, when rename fails, delete both the source and the
destination, and fall back to uploading the content again. In the box.com
case, the temp file is the source, and deleting it makes sure the temp file
gets cleaned up. In the 4shared case, the file may have been renamed to the
destination and so cleaning that up avoids any interference with the
re-upload to the destination.
unregisterurl: Fix a bug that caused an url to not be unregistered when it
is claimed by a special remote other than the web.
See commit f175d4cc90 for rationalle.
* rmurl: When youtube-dl was used for an url, it no longer needs to be
prefixed with "yt:" in order to be removed.
* rmurl: If an url is both used by the web and also claimed by another
special remote, fix a bug that caused the url to to not be removed.
The youtube-dl change is a consequence of how the bug fix is implemented.
But I also think it's the right thing to do. Consider that, before,
git-annex addurl $url followed by git-annex rmurl $url would not remove the
url in the case where youtube-dl was used. That was surprising behavior.
In the unlikely case where a special remote claims an url, and it's been
added using OtherDownloader, but it was also added already as a web url,
it seems better for rmurl to remove both than to arbitrarily remove only one.
And in the case the bug report was filed for, when an url was added as a
web url, but a special remote now claims it, that should not prevent rmurl
removing the web url.
Calling setUrlMissing lets other callers of it behave differently.
Probably the calls to it in eg, Remote.External and Remote.BitTorrent are
fine, since they don't mangle the url and just remove what was provided,
and the OtherDownloader form of a bittorrent url, respectively.
I suspect unregisterurl needs to have a similar change made to rmurl, for
similar reasons.
When autoenabling special remotes of type S3, weddav, or glacier, do not
take login credentials from environment variables, as the user may not be
expecting the autoenable to happen, and may have those set for other
purposes.
Like import was using ActionItemWorkTreeFile, it's ok to use it for export,
even though it might not correspond with a file in the work tree.
And renamed it to ActionItemTreeFile to make that clearer.
Note that when an export has to rename files, it still uses
ActionItemOther, so file will still be null in that case, but as no file is
being transferred, that seems ok.
import: When the previously exported tree contained a submodule,
preserve it in the imported tree so it does not get deleted.
The export exclude log, which was used for non-preferred content,
now also includes the submodules. Since the log format is git ls-tree
output, this does not break backwards compatibility.
This mostly affects OSX and (possibly) Windows, but the Windows
installer does not bundle git. The linux standalone builds are not
updated yet pending debian stable getting a backport of the security
fix, but the security hole is unlikely to affect linux as
case-insensitive filesystems that support symlinks are a rarity on it.
Using the linux standalone build on windows via WSL is another way it
could be affected.
This commit was sponsored by Brett Eisenberg on Patreon.
Which access a remote using rsync over ssh, and which git pushes to much
more efficiently than ssh urls.
There was some old partial support for rsync URIs from 2013, but it seemed
incomplete, and did not use rsync over ssh. Weird.
I'm not sure if there's any remaining benefit to using the non-rsync url
forms with gcrypt, now that this is implemented? Updated docs to encourage
using the rsync urls.
This commit was sponsored by Svenne Krap on Patreon.
Git.Remote.parseRemoteLocation had a hack to handle URIs that contained
characters like spaces, which is something git unfortunately allows
despite not being a valid URI. However, that hack looked for "//" to
guess something was an URI, and these gcrypt URIs, being to a local
path, don't contain that. So instead escape all illegal characters and
check if the resulting thing is an URI.
And that was already done by Git.Construct.fromUrl, so
internally the gcrypt URI with a space looks like "gcrypt::foo%20bar"
and that needs to be de-escaped when converting back from URI to local
repo path.
This change might also allow a few other almost-valid URIs to be handled
as URIs by git-annex. None that contain "//" will change, and any
behavior change should result in git-annex doing closer to a right thing
than it did before, probably.
This commit was sponsored by Noam Kremen on Patreon.
Previously such nonsensical combinations always treated the matching option
as if it didn't match.
For now, made find --branch refuse matching options that need a
filename, because one is not provided to them in a way they'll use.
There's an open bug report to support it, but making it error out is
better than the old behavior of not finding what it was asked to.
Also, made --mimetype combined with eg --all work, by looking at the
object file when operating on keys.
Implemented by generalizing registerurl. Without the implicit batch mode
of registerurl since that is only a backwards compatability thing
(see commit 1d1054faa6).
unannex, uninit: When an annexed file is modified, don't overwrite the
modified version with an older version from the annex
This commit was sponsored by Mark Reidenbach on Patreon.
This benchmarks only slightly faster than the old git-annex. Eg, for a 1
gb file, 14.56s vs 15.57s. (On a ram disk; there would certianly be
more of an effect if the file was written to disk and didn't stay in
cache.)
Commenting out the updateIncremental calls make the same run in 6.31s.
May be that overhead in the implementation, other than the actual
checksumming, is slowing it down. Eg, MVar access.
(I also tried using 10x larger chunks, which did not change the speed.)
Changing to the P2P protocol broke this, because preseedTmp copies
the local copy of the object to the temp file, and then the P2P transfer
sees the right length file and uses it as-is.
When git-annex-shell is too old and rsync is used, it did verify the
content, and when the local repo does not have the object it did verify the
content.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
See my comment in the next commit for some details about why
Verified needs a hash with preimage resistance. As far as tahoe goes,
it's fully cryptographically secure.
I think that bup could also return Verified. However, the Retriever
interface does not currenly support that.
When a git remote is configured with an absolute path, use that path,
rather than making it relative. If it's configured with a relative path,
use that.
Git.Construct.fromPath changed to preserve the path as-is,
rather than making it absolute. And Annex.new changed to not
convert the path to relative. Instead, Git.CurrentRepo.get
generates a relative path.
A few things that used fromAbsPath unncessarily were changed in passing to
use fromPath instead. I'm seeing fromAbsPath as a security check,
while before it was being used in some cases when the path was
known absolute already. It may be that fromAbsPath is not really needed,
but only git-annex-shell uses it now, and I'm not 100% sure that there's
not some input that would cause a relative path to be used, opening a
security hole, without the security check. So left it as-is.
Test suite passes and strace shows the configured remote url is used
unchanged in the path into it. I can't be 100% sure there's not some code
somewhere that takes an absolute path to the repo and converts it to
relative and uses it, but it seems pretty unlikely that the code paths used
for a git remote would call such code. One place I know of is gitAnnexLink,
but I'm pretty sure that git remotes never deal with annex symlinks. If
that did get called, it generates a path relative to cwd, which would have
been wrong before this change as well, when operating on a remote.
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
annex.stalldetection can now be set to "true" to make git-annex do
automatic stall detection when it detects a remote is updating its transfer
progress consistently enough.
This commit was sponsored by Luke Shumaker on Patreon.
Seems only fair, that, like git runs git-annex, git-annex runs
git-annex-foo.
Implementation relies on O.forwardOptions, so that any options are passed
through to the addon program. Note that this includes options before the
subcommand, eg: git-annex -cx=y foo
Unfortunately, git-annex eats the --help/-h options.
This is because it uses O.hsubparser, which injects that option into each
subcommand. Seems like this should be possible to avoid somehow, to let
commands display their own --help, instead of the dummy one git-annex
displays.
The two step searching mirrors how git works, it makes finding
git-annex-foo fast when "git annex foo" is run, but will also support fuzzy
matching, once findAllAddonCommands gets implemented.
This commit was sponsored by Dr. Land Raider on Patreon.
I suspect this is a bug in cabal sdist, because with
Includes: Utility/libkqueue.h
the file is not included, but putting it in extra-files does
get it into the tarball.
Fix an oddity in matching options and preferred content expressions such as
"foo (bar or baz)", which was incorrectly handled as if it were "(foo or
bar) and baz)" rather than the intended "foo and (bar or baz)"
Seemed like a change to consume should be able to handle this case
better, but I was having trouble writing it that way, so instead added
a separate pass that inserts the implicit ands explicitly. Also added
several test cases to make sure versions with and without explicit ands
generate the same.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
Fixed that, and made parserLsTree accept the space as well as tab.
Fixes a reversion that made import of a tree from a special remote result in
a merge that deleted files that were not preferred content of that special
remote.
Avoids the smudge --clean filter failing because URL keys do not support
genKey. Instead the modified content will be added using the default
backend.
This commit was sponsored by Jochen Bartl on Patreon.
This avoids the smudge --clean filter failing on the URL keys.
git checkout runs the post-checkout hook, which runs smudge --update.
That populates all the pointer files, but it neglected to store their inode
caches in the keys db. With that done, and the keys db flushed before
smudge --clean gets run (by restagePointerFile), the isUnmodifiedCheap
check can tell the file is not modified, so will not try to re-ingest it,
which does not work with URL keys because they do not support genKey.
It also seems possible that the isUnmodifiedCheap was also failing for
non-URL keys, which would cause them to be re-ingested, leading to a lot of
extra work. I have not verified that, but don't see why it wouldn't have
happened. So this probably also speeds up checking out adjusted branches.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is probably a reversion, but not sure what caused it. By the time
Annex.Init runs fixupUnusualReposAfterInit, another git-annex process has
at least sometimes already done the necessary fixups. (Eg, one run
indirectly by a git command.) But since the Repo is cached, it doesn't
realize and does them again. So, avoid crashing when git config --unset
fails.
This commit was sponsored by Jack Hill on Patreon.
Directory special remotes with importtree=yes now avoid unncessary overhead
when inodes of files have changed, as happens whenever a FAT filesystem
gets remounted.
A few unusual edge cases of modifications won't be detected and
imported. I think they're unusual enough not to be a concern. It would
be possible to add a config setting that controls whether to compare
inodes too, but does not seem worth bothering the user about currently.
I chose to continue to use the InodeCache serialization, just with the
inode zeroed. This way, if I later change my mind or make it
configurable, can parse it back to an InodeCache and operate on it. The
overhead of storing a 0 in the content identifier log seems worth it.
There is a one-time cost to this change; all directory special remotes
with importtree=yes will re-hash all files once, and will update the
content identifier logs with zeroed inodes.
This commit was sponsored by Brett Eisenberg on Patreon.
Including the non-standard URI form that git-remote-gcrypt uses for rsync.
Eg, "ook://foo:bar" cannot be parsed because "bar" is not a valid port
number. But git could have a remote with that, it would try to run
git-remote-ook to handle it. So, git-annex has to allow for such things,
rather than crashing.
This commit was sponsored by Luke Shumaker on Patreon.
Since that can lead to data loss, which should never be enabled by an
option other than --force.
I suppose that using --trust was in some situation, safer than --force,
because it doesn't entirely disable checking for data loss, but only
disables checking involving data that is on the specified repository.
But it seems better to be able to say that data loss only happens with
--force.
This commit was sponsored by Graham Spencer on Patreon.
Since unconsidered use of trusted repositories can lead to data loss.
Trusted has always been this way, but it used to be acceptable for
git-annex to be set up so that data could be lost without using --force,
and most or all other ways that can happen have already been eliminated.
This commit was sponsored by Mark Reidenbach on Patreon.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
It got broken in several ways by the streaming seeking optimisations
around version 8.20201007.
Moved time limit checking out of the matcher, which was a hack in the
first place. So everywhere that uses Limit.getMatcher needs to check
time limit. Well, almost everywhere. Command.Info uses it, but it does
not make sense to time limit getting info. And Command.MultiCast uses it
just to build up a list of files that then get passed to a command, so
it would never have hit the timeout in a useful way.
This implementation is a little more expensive when at time limit than
necessary, since it continues seeking only to discard everything after the
time limit. I did try making it close the file handles to force a faster
shutdown, but that didn't work and hung. Could certianly be improved
somehow, but seeking is probably not the expensive bit when a time limit
is hit, so this seems acceptable for now.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
And vice-versa, but it's better to use '/' for portability.
Notably, standardPreferredContent contains "archive/*" and that might not
match if the filename ends up coming in with the slashes the other way
around.
I do think this was a reversion, but I have not tracked back to what
version. While involving the remote config, it's not the same class of
problems that I kept having to chase down for a while after the remote
config parser reworking.
This is common in some feeds, which might mix some items with enclosures,
with others that link to posts or whatever. Before this, it would try to
use youtube-dl and fail, or if youtube-dl was not allowed, it would
incorrectly complain that an url was supported by youtube-dl.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
* Guard against running in a repo where annex.uuid is set but
annex.version is set, or vice-versa.
* Avoid autoinit when a repo does not have annex.version or annex.uuid
set, but has a git-annex objects directory, suggesting it was used
by git-annex before.
There was no particular reason not to support this, other than maybe a lack
of a use case. One use case would of course be a remote that you want to
avoid overwriting content on. A new use case is the idea of importing from
backups, eg borg, where exporting is not necessarily supported at all.
This commit was sponsored by Brock Spratlen on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
Avoid spurious "verification of content failed" message when downloading
content from a ssh or tor remote fails due to the remote no longer having a
copy of the content.
The P2P protocol already handled this case by sending DATA 0, followed by
VALID. But VALID was not really right, because the data is not the
requested data. So, send DATA 0, followed by INVALID. Old versions of
git-annex handle INVALID the same as VALID in this case. Now new versions
avoid displaying an incorrect message.
It would be better for the P2P protocol to have a different way to indicate
this, like perhaps sending INVALID without DATA. But that would be a
breaking change and need a new protocol verison. Since INVALID already is
part of the protocol and already needs to be handled, using it for this
special case too seems ok, and avoids the complication of another protocol
version.
This commit was sponsored by Jochen Bartl on Patreon.
This is an edge case, which happened to be triggered by the P2P protocol
seeing DATA 0. When reading 0 bytes, getting an empty string does
not mean the handle has reached EOF.
I verified there was in fact a bug, where get of an empty file followed
by another file would get the empty file and then fail
with "handle is closed". This fixes it.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Reversion introduced in version 8.20201007, one release after the 1st
release with the extension.
Surprisingly, hClose can hang if another thread is reading from the
handle. This is because it uses takeMVar.
The use of cancel here does mean that, if receiveMessageAddonProcess
or Remote.External.AsyncExtension.receiveloop allocated some resource in
a non-async-exception safe way, they might not get a chance to clean it up.
They do not appear to, and anyway, this only happens when git-annex is
shutting down, so any recource that did leak would not be a problem.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Only displaying git-annex and git command output when something went wrong.
A few could still leak stderr. These include the couple of calls
to readProcess, which reads stdin but lets stderr through. But they don't
leak any usually, so probably only would when failing anyway.
Currently, there is no excess output at all!
This commit was sponsored by Brock Spratlen on Patreon.
Fix a bug that could make resuming a download from the web fail when the
entire content of the file is actually already present locally.
What a mess that Request can throw exceptions or not, depending on how
it's configured. Makes it very hard if you need to handle some specific
http status codes in a function like this! Implementing everything two
ways did not seem appealing, if possible at all, so I decided to
override the Request if it did come configured to throw exception on
non-2xx http status. Other exceptions, like from http-client-restricted,
or due to a redirect to a non-http url, still get thrown.
This commit was sponsored by Luke Shumaker on Patreon.
Prevent windows assistant from trying (and failing) to upgrade itself,
which has never been supported on windows.
The new windows build is made with UPGRADE_LOCATION set, which enabled this
code path that had never run on windows before, and doesn't work. I don't
want to try to support self-upgrade on windows, or generally on other OS's
than the ones where its working, so added a check for that. This way the
build can keep setting UPGRADE_LOCATION and if some later git-annex does
learn how to upgrade itself on some OS, it won't need changing the build
setup.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
An --unlock-present branch reverses back to a branch where
all files that get modified or renamed become locked, even if they were
originally unlocked. This is the same that reversing a --unlock branch
works, and the new name makes that commonality more clear.
Like --hide-missing the branch does not get updated when content
availability changes.
Seems to basically work, but sync does not update it yet.
Also, when a file is present and so unlocked, git mv followed by
git-annex sync results in the basis branch being updated to contain the
file with the new name, unlocked. This seems different than what
happens in an adjusted unlocked branch, where the commit propigates back
locked. Probably the reverse adjustment code needs to be improved to
handle this case.
Note that, the way the SeekInput parser is written to support batch mode,
it's actually possible to do git-annex examinekey
"SHA1--foo foo.tar.gz" --migrate-to-backend=SHA1E
While that might be kind of useful to support multiple migrations not using
batch mode, I have not documented it. It would be better to take pairs of
key and file in that case.
Warn when adding a annex symlink or pointer file that uses a key that is
not known to the repository, to prevent confusion if the user has copied it
from some other repository.
This commit was sponsored by Jake Vosloo on Patreon.
This fixes a bug where a file that was not preferred content could be
transferred to a remote. This happened when the file got deleted after
the sync started running.
The only time checkMatcher is run without a Key is in calls to
checkFileMatcher, which are only done by add, addurl, import, and
smudge --clean. Those won't be affected by this kind of race. Anything
else that might be precaching and have a similar race as sync will also
be fixed, but I don't know if it actually affected anything other than
sync.
As well as fixing a bug, this also probably makes sync and --auto faster
by avoiding the redundant key lookup.
This commit was sponsored by Graham Spencer on Patreon.
Make sure to relay any remaining stderr from the process after it has
shut down, rather than closing stderr just before shutdown. This avoids
a situation where the process is still running and tries to write to
stderr, getting a SIGPIPE. And, it ensures that no stderr output is
lost.
This may fix a problem encountered by datalad on windows, where it hangs
during the external special remote shutdown.
Before commit a49d300545, it closed stdin
and stdout, but left stderr open, and never killed the stderr waiter
thread, which presumably exited on its own. For async exception
safety, do need to at make sure that thread gets waited on, as that
commit does, but it introduced this problem.
Note that, the process's stdout is closed before waiting on it. It's too
late for anything it writes to stdout to be processed, and since we're
not going to consume any such writes, this avoids the process getting
blocked writing to stdout due to us not reading what it's buffered. This
does mean that if the process writes to stdout too late, it will get a
SIGPIPE. (This was already the case before the above-mentioned commit.)
In practice, I think only the protocol's ERROR is allowed to be
sent at a point where this could happen.
Because it's a special character on Windows ("c:").
Use same technique already used for '/' and '\'.
I didn't record how I generated their encoded forms before, so am sure
there was a better way, but the way I did it now is to look at
ghci> encodeFilePath "∕"
"\226\136\149"
And then the difference from that to "\56546\56456\56469"
is adding 56320 to each, to get up to the escaped code plane.
See comment for why I think handling ':' is ok, but that other illegal
windows filenames won't. Note that, this should be enough to make the
test suite always work. Other windows illegal filenames will fail at
checkout time when it tries to put the illegal filename on the
filesystem.
This is a cleaner build than on Jenkins because the whole environment setup
is handled by the CI config, at least up to the point of "get a random bag
of Windows bytes".
Also, the Jenkins autobuilder has been intermittently failing for a long
time, not due to any problem with git-annex but just a failure to clean up
directories.
Also, this build runs the test suite, and it is (mostly) passing. Test
suite always failed in the jenkins environment.
Also, this build includes libmagic.
Here is the build workflow used by github actions:
https://github.com/datalad/datalad-extensions/blob/master/.github/workflows/build-git-annex-windows.yaml
The libmagic build has its own workflow:
https://github.com/datalad/file-windows/blob/master/.github/workflows/build.yml
(Also cleaned up some windows build cruft I don't use anymore.)
There is no build-version file to link to. I've opened a todo requesting
one: https://github.com/datalad/datalad-extensions/issues/55
This fixes the bug.
Note, it's only done when GIT_DIR is set. When it's not set,
Git.Construct already handled it. This is why it was only noticed with this
git submodule command.
This commit was sponsored by Brett Eisenberg on Patreon.
When a special remote has chunking enabled, but no chunk sizes are
recorded (or the recorded ones are not found), speculatively try chunks
using the configured chunk size.
This makes eg, git-annex fsck --from remote be able to fix up the
location log of a file that the git-annex branch does not indicate is
stored on the remote.
Note that fsck does *not* fix up the chunk log to indicate the chunk
size. So, changing the chunk config of the remote after that will still
prevent accessing the chunks stored on it. Maybe fsck should, but I
wanted to start with this and see if it's needed.
In cases where numcopies checks prevented the resumed move from dropping
the object from the source repository, it now relies on a log of recent
moves to replicate the behavior of the interrupted command.
Performance: Probably noticable impact, since it has to add to the log,
check the log, and remove from the log. Seems worth it to avoid this
annoying edge case. The log functions are pretty well optimised to avoid
unncessary work.
An performance improvement to make later would be to avoid cleanup doing
anything if it's not written to the log file, and has confirmed that the
log file does not contain the log line.
This commit was sponsored by Jake Vosloo on Patreon.
The problem was this line:
cleanup = and <$> sequence (map snd v)
That caused all of v to be held onto until the end, when the cleanup action
was run.
I could not seem to find a bang pattern that avoided the leak, so I
resorted to a IORef, rather clunky, but not a performance problem because
it will only be written once per git ls-files, so typically just 1 time.
This commit was sponsored by Mark Reidenbach on Patreon.
inet_addr was removed, but all this needs is localhost, so hardcoding it
should work fine.
It may be that this windows ifdef is no longer needed. It was added in 2013
with a note that getAddrInfo didn't work on windows, but it seems likely
such a problem would have been fixed since.
Only turning it off when the criterion library is not installed.
Not enabled for osx or i386ancient yet since that will need some
invesitgation to update their respective stack.yaml files.
Broke a while ago during optimisation work, and not noticed since the flag
is disabled by default.
This commit was sponsored by Brock Spratlen on Patreon.
It seemed best to do this, for consistency with every other way files can
get into a git-annex repo. Although it's just a bit strange that a local
.gitignore file affects the pseudo-commits made for the remote that's
imported from.
This commit was sponsored by Brett Eisenberg on Patreon.
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
Ensure that checkCanAdd is used everywhere a file is added to git,
so git add is run with -f, presumably avoiding the work it would usually
do to check ignores.
sync: When run without --content, import without copying from
importtree=yes directory special remotes. (Other special remotes may
support this later as well.)
This commit was sponsored by Svenne Krap on Patreon.
Import small files into git, the same as is done when importing with content.
Which means, for small files, --no-content does download them.
If the largefiles expression needs the file content available
(due to mimetype or mimeencoding being used), the import will fail.
This commit was sponsored by Jake Vosloo on Patreon.
Sped up seeking for files to operate on, when using options like --copies
or --in, by around 20%.
Benchmark showed an increase for --copies from 155 seconds to 121
seconds, and --in remote will be similar to that.
For --in here, the speedup was less, 5-10% or so.
(both warm cache)
This commit was sponsored by Jack Hill on Patreon.
Sped up seeking to around twice as fast, by avoiding a pass over the
worktree files when preferred content expressions of the local repo and
remotes don't use include=/exclude=.
Thanks to Lukey for identifying the optimisation.
This commit was sponsored by Brock Spratlen on Patreon.
getPid returns Nothing if the process has already been stopped, and in that
case, the pid will not be displayed. I think that would only happen if
waitForProcess or similar gets called more than once on the same process
handle though.
getPid on unix has an overhead of only a MVar read. On Windows it needs to
make a syscall, so will be probably more expensive. While the added expense
happens even when debug logging is disabled, it should be small enough
compared with the overhead of starting a process that it's not a problem.
(It does occur to me that a debugM that took an IO String could only run it
when debugging is really enabled, which would improve performance. It does
not seem possible to use the current hslogger interface to do that though;
it does not expose the information that would be needed.)
With some hints for the user for what to do.
Took care to avoid changing the json output. It would have been ok to add
the new separated lists to it, in addition to the old list, but I didn't
do that because I didn't see much point.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
--batch combined with -J now runs batch requests concurrently for many
commands. Before, the combination was accepted, but did not enable
concurrency. Since the output of batch requests can be in any order, --json
with the new "input" field is recommended to be used, to determine which
batch request each response corresponds to.
If --json is not used, batch mode still runs concurrently, using the usual
concurrent-output. That will not be very useful for most batch mode users,
probably, but who knows.
If a program was using --batch -J before, and was parsing non-json output,
this could break it. But, it was relying on git-annex not supporting
concurrency despite it being enabled, so it should have expected concurrent
output. So, I think that's ok.
annex.jobs does not enable concurrency in --batch mode, because that would
confuse programs that use --batch but don't expect concurrency.
The use case of this field is mostly to support -J combined with --json.
When that is implemented, a user will be able to look at the field to
determine which of the requests they have sent it corresponds to.
The field typically has a single value in its list, but in some cases
mutliple values (eg 2 command-line params) are combined together and the
list will have more.
Note that json parsing was already non-strict, so old git-annex metadata
--json --batch can be fed json produced by the new git-annex and will
not stumble over the new field.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
Works better with automatic merge conflict resolution than git's ususual
default of "conflict".
This is not done when automatic merge conflict resolution is disabled.
This commit was sponsored by Mark Reidenbach on Patreon.
This case was handled by cleanConflictCruft, but only when the annexed
file's object was present. When not present, it left the annexed file
with the original name, not checked into git, while adding the variant
file. So, add an explicit deletion of the deleted file in this case.
My specific case where this happened actually involves
merge.directoryRenames=conflict. After a merge involving that,
the situation was the file appears as "added by them", because that
caused the file that they added to be moved into a directory we renamed.
That case is the same as them adding a modified version of the file,
while we deleted it. (Except for the history of the file, since it's a
new file, but this doesn't look at history.)
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
One reason is, 5 is an arbitrary number so ought to be configurable.
The real reason though, is I wanted to make the man page explain when
forward retry can override annex.retry, and having a config made the
man page easier to write.
Fixed several cases where files were created without file mode bits that
the umask would usually set. This included exports to the directory special
remote, torrent files used by the bittorrent special remote, hooks written
by git-annex init, and some log files in .git/annex/
Audited all calls, looking for ones that didn't want the umask bits to be
set. All such turned out to already set the specific restrictive file mode
they wanted.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
They normally shutdown when the GNUPGHOME directory is deleted, but on
NFS they keep the directory from being deleted. And also, this avoids
a number of them piling up while the test suite is running.
Fixes reversion in 8.20200617 that made annex.pidlock being enabled result
in some commands stalling, particularly those needing to autoinit.
Renamed runsGitAnnexChildProcess to make clearer where it should be
used.
Arguably, it would be better to have a way to make any process git-annex
runs have the env var set. But then it would need to take the pid lock
when running any and all processes, and that would be a problem when
git-annex runs two processes concurrently. So, I'm left doing it ad-hoc
in places where git-annex really does run a child process, directly
or indirectly via a particular git command.
addurl: Fix reversion in 7.20190322 that made --file not be honored when
youtube-dl was used to download media.
8758f9c561 was on the right track, but missed that | otherwise prevented
the code it added from being used.
Also, refactored out a common function.
This commit was sponsored by Graham Spencer on Patreon.
I'm sure this used to work, but somewhere along the line something or
things (getCost and getAvailability I think, probably others)
started catching the exception and not displaying it. So, show warnings.
Avoid complaining that a file with "is beyond a symbolic link" when the
filepath is absolute and the symlink in question is not actually inside the
git repository.
This assumes that inodes remain stable while the command is running.
I think they always will, the filesystems where they are unstable change
them across mounts. (If inodes were not stable, it would just complain about
symlinks in the path that are not inside the working tree.)
(On windows, I don't want to assume anything about inodes, they could be
random numbers for all I know. But if they were, this would still be ok, as
long as windows doesn't have symlinks that are detected by isSymbolicLink.
Which seems a fair bet.)
sanitizeFilePath was changed to sanitize leading '.', but ImportFeed was
running it on parts of the template. So eg the leading '.' in the extension
got sanitized.
Note the added case for sanitizeLeadingFilePathCharacter ('/':_)
-- this was added because, if the template is title/episode and the title
is not set, it would expand to "/episode". So this is another potential
security fix.
Reduce the number of directories listed in libdirs, which makes the linker
check a lot less dead ends looking for directories.
Eliminated some directories that didn't really contain shared libraries,
or only contained the linker.
That left only 2, one in lib and one in usr/lib, so consolidate those two.
Doing it this way, rather than just consolidating all libs that might exist
into a single directory means that, if there are optimised versions of some
libs, eg in lib/subarch/foo.so, and lib/subarch2/foo.so, they don't get
moved around in a way that would make the linker pick the wrong one.
Sped up seeking files to drop by 2x, and also some performance
improvements to checking numcopies.
Interestingly, the seek speedup is not due to precaching, but I think is
due to calling getParsed earlier.
Annex.Drop had to be changed to check inAnnex there, since it was removed
from Command.Drop. All other users of Command.Drop already checked inAnnex
themselves.
This commit was sponsored by Ryan Newton on Patreon.
And add a test case for that.
This certianly loses some of the 2x performance improvement in file
seeking that seekFilteredKeys led to, because now it has to stat the
worktree files again. Without benchmarking, I expect there will still be
a sizable improvement, and also the git-annex branch precaching that
seekFilteredKeys can do will still be a win of its approach.
Also worth noting that lookupKey, when the file DNE, check if it's in an
adjusted branch with hidden files, and if so, finds the key for the
file anyway. That was intended to make git-annex sync --content be able
to process those files, but a side effect was that, when a file was
deleted but the deletion not yet staged, git-annex commands used to
still list it. That was actually a bug. This commit fixes that bug too.
(git-annex sync --content on such a branch does not use seekFilteredKeys
so was not affected by the reversion or by this behavior change)
This commit was sponsored by Jake Vosloo on Patreon.
This was a bit disappointing, I was hoping for a 2x speedup. But, I think
the metadata lookup is wasting a lot of time and also needs to be made to
stream.
The changes to catObjectStreamLsTree were benchmarked to not also speed
up --all around 3% more. Seems I managed to make it polymorphic after all.
Turns out the %(rest) trick was not needed. Instead, just maintain a
list of files we've asked for, and each cat-file response is for the
next file in the list.
This actually benchmarks 25% faster than before! Very surprising, but it
must be due to needing to shove less data through the pipe, and parse
less.
This assumes that no location log files will have a newline or carriage
return in their name. catObjectStream skips any such files due to
cat-file not supporting them.
Keys have been prevented from containing newlines since 2011,
commit 480495beb4. If some old repo
had a key with a newline in it, --all will just skip processing that key.
Other things, like .git/annex/unused files certianly assume no newlines in
keys too, and AFAICR, such keys never actually worked.
Carriage return is escaped by preSanitizeKeyName since 2013. WORM keys
generated before that point could perhaps contain a CR. (URL probably not,
http probably doesn't support an URL with a raw CR in it.) So, added
a warning in fsck about such keys. Although, fsck --all will naturally
skip them, so won't be able to warn about them. Not entirely
satisfactory, but I'll bet there are not really any such keys in
existence.
Thanks to Lukey for finding this optimisation.
The cache was removed way back in 2012,
commit 3417c55189
Then I forgot I had removed it! I remember clearly multiple times when I
thought, "this reads the same data twice, but the cache will avoid that
being very expensive".
The reason it was removed was it messed up the assistant noticing when
other processes made changes. That same kind of problem has recently
been addressed when adding the optimisation to avoid reading the journal
unnecessarily.
Indeed, enableInteractiveJournalAccess is run in just the
right places, so can just piggyback on it to know when it's not safe
to use the cache.
adb shell has sha256sum sha1sum and some others, so they could be used.
They're provided by toybox, so seem about as likely to keep
working as find and stat, which it already depends on.
Or to not add a dep, could use stat the same as getExportContentIdentifier
to get a mtime, and make a WORM key. But do I really want this to
default to WORM?
Unsure what's the best path, so punting for now.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
Always run Git.Config.store, so when the git config gets reloaded,
the override gets re-added to it, and changeGitRepo then calls extractGitConfig
on it and sees the annex.* settings from the override.
Remove any prior occurance of -c v and add it to the end. This way,
-c foo=1 -c foo=2 -c foo=1 will pass -c foo=1 to git, rather than -c foo=2
Note that, if git had some multiline config that got built up by
multiple -c's, this would not work still. But it never worked because
before the bug got fixed in the first place, the -c value was repeated
many times, so the multivalue thing would have been wrong. I don't think
-c can be used with multiline configs anyway, though git-config does
talk about them?
Trivial since git-annex cannot remove, but do an active checkKey verification
anyway, in case the data was lost somehow.
This commit was sponsored by Ryan Newton on Patreon.
Made several special remotes support locking content on them while
dropping, which allows dropping from another special remote when the
content will only remain on a special remote of these types.
In both cases, verify the content is present actively, because it's
certianly possible for things other than git-annex to have removed it.
Worth thinking about what to do if at some later point, git-lfs gains
support for dropping content, and a content locking operation.
That would probably need a transition; first would need to make lockContent
use the locking operation. Then, once enough time had passed that we can
assume any git-annex operating on the git-lfs remote had that change,
git-annex could finally allow dropping from git-lfs.
Or, it could be that git-lfs gains support for dropping content, but not
locking it. In that case, it seems this commit would need to be reverted,
and then wait long enough for that git-annex to be everywhere, and only
then can git-annex safely support dropping from git-lfs.
So, the assumption made in this commit could lead to bother later.. But I
think it's actually highly unlikely git-lfs does ever support dropping;
it's outside their centralized model. Probably. :) Worth keeping in mind as
the same assumption is made about other special remotes though.
This commit was sponsored by Ethan Aubin.
git is making that configurable, and configuring it globally would break
the test suite in a few places.
No other part of git-annex assumes any branch name. Renamed a few
placeholders to make that clearer.
This commit was sponsored by Jake Vosloo on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-http-client-restricted-dev
This commit was sponsored by Ilya Shlyakhter on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-git-lfs-dev.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Fix a deadlock that could occur after git-annex got an unlocked file,
causing the command to hang indefinitely.
Known to happen on vfat filesystems, possibly others.
Note that a deadlock is still theoretically possible, if anything
smudge --clean does causes it to run the git queue for some other
reason.
Apparently that doesn't happen, but will need to keep an eye on it.
That made eg git-annex get of an unlocked file hang until the
annex.pidlocktimeout and then fail.
This fix should be fully thread safe no matter what else git-annex is
doing.
Only using runsGitAnnexChildProcess in the one place it's known to be a
problem. Could audit for all places where git-annex runs itself as a child
and add it to all of them, later.
Fix bug that made creds not be stored in git when a special remote was
initialized with gpg encryption, but without an explicit embedcreds=yes.
(Yet nother regression introduced in version 7.20200202.7. 5th so far.)
This makes the creds get saved, since only things recorded there will be
saved.
IIRC, unparsedRemoteConfig was not originally available when I
implemented this; now that it is things get a bit simpler.
More could probably be simplified, is externalConfigChanges needed at
all?
This does not entirely fix the bugs though, because creds are only
embedded when embedcreds=yes, but not when encryption=pubkey is used
without embedcreds=yes.
checkpresentkey: When no remote is specified, try all remotes, not only
ones that the location log says contain the key. This is what the
documentation has always said it did.
Still try the logged remotes first, because they are far more likely to
have the key.
* Improve display of problems auto-initializing or upgrading local git
remotes.
* When a local git remote cannot be initialized because it has no
git-annex branch or a .noannex file, avoid displaying a message about it.
So stop documenting it, and stop offering it as a choice in the assistant.
Removed the code that parses it into S3.ReducedRedundancy, because
S3.OtherStorageClass with the value will work just the same and avoids a
special case for a deprecated this.
The ContentIdentifier can contain almost anything, so could have characters
that are not fit for the filesystem, or might be longer than a key usually
is, or contain a newline, or .... genKeyName deals with those problems.
This should not present a back-compat issue, because this is a temporary
key used while downloading the imported file, before the real key for it
can be generated.
Since an external process can be in the middle of some operation when an
async exception is received, it has to be shut down then. Using
cleanupProcess will close its IO handles and send it a SIGTERM.
If a special remote choses to catch SIGTERM, it's fine for it to do some
cleanup then, but until it finishes, git-annex will be blocked waiting
for it. If a special remote blocked SIGTERM, it would cause a hang.
Mentioned in docs.
Also, in passing, fixed a FD leak, it was not closing the error handle
when shutting down the external. In practice that didn't matter before because
it was only run when git-annex was itself shutting down, but now that it
can run on exception, it would have been a problem.
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
Fix a crash or potentially not all files being exported when sync -J
--content is used with an export remote.
Crash as described in fixed bug report.
waitForAllRunningCommandActions inserted in several points where all the
commandActions started before need to have finished before moving on to
the next stage of the export. A race across those points could have
maybe resulted in not all files being exported, or a wrong tree being
export.
For example, changeExport starting up an action like
a rename of A to B. Then, with that action still running, fillExport
uploading a new A, *before* the rename occurred. That race seems
unlikely to have happened. There are some other ones that this also
fixes.
move --to, copy --to, mirror --to: When concurrency is enabled, run cleanup
actions in separate job pool from uploads.
transferStages was confusingly named, it's only useful when doing downloads
as then the verify actions can be run concurrently with other downloads.
For commands that upload, there will be more concurrency from running
cleanup actions in a separate job pool.
As for sync, I left it using downloadStages although that's not optimal
for the part of a sync that uploads. Perhaps it should use the union of
both?
Already supported --json, but not that.
Also checked all other commands that only support --json, and the only
other one that does transfers is fsck (--from), which it did not seem worth
adding --json-progress to really.
Fix bug that made enableremote of S3 and webdav remotes, that have
embedcreds=yes, fail to set up the embedded creds, so accessing the remotes
failed.
(Regression introduced in version 7.20200202.7 in when reworking all the
remote configs to be parsed.)
Root problem is that parseEncryptionConfig excludes all other config keys
except encryption ones, so it is then unable to find the
credPairRemoteField. And since that field is not required to be
present, it proceeds as if it's not, rather than failing in any visible
way.
This causes it to not find any creds, and so it does not cache
them. When when the S3 remote tries to make a S3 connection, it finds no
creds, so assumes it's being used in no-creds mode, and tries to find a
public url. With no public url available, it fails, but the failure doesn't
say a lack of creds is the problem.
Fix is to provide setRemoteCredPair with a ParsedRemoteConfig, so the full
set of configs of the remote can be parsed. A bit annoying to need to
parse the remote config before the full config (as returned by
setRemoteCredPair) is available, but this avoids the problem.
I assume webdav also had the problem by inspection, but didn't try to
reproduce it with it.
Also, getRemoteCredPair used getRemoteConfigValue to get a ProposedAccepted
String, but that does not seem right. Now that it runs that code, it
crashed saying it had just a String.
Remotes that have already been enableremoted, and so lack the cached creds
file will work after this fix, because getRemoteCredPair will extract
the creds from the remote config, writing the missing file.
This commit was sponsored by Ilya Shlyakhter on Patreon.
One way this can be used is to remove all urls for some website that went
away:
git-annex whereis --format '${file} ${url}\0' | \
grep -z whatever.com | git-annex rmurl --batch -z
Combining ${url} and ${uuid} is a bit of a combinatorial explosion.
It didn't seem worth only outputting a uuid alongside an url belonging
to it, so each uuid is output beside each url.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
This relicates git's behavior. It adds a few stat calls for the command
line parameters, so there is some minor slowdown, but even with thousands
of parameters it will not be very noticable, and git does the same statting
in similar circumstances.
Note that this does not prevent eg "git annex add symlink"; the symlink
will be added to git as usual. And "git annex find symlink" will silently
list nothing as well. It's only "symlink/foo" or "subdir/symlink/foo" that
triggers the warning.
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
git-lfs repos that encrypt the annexed content but not the git repo only
need --force passed to initremote, allow enableremote and autoenable of
such remotes without forcing again.
Needing --force again particularly made autoenable of such a repo not work.
And once such a repo has been set up, it seems a second --force when
enabling it elsewhere has little added value. It does tell the user about
the possibly insecure configuration, but if the git repo has already been
pushed to that remote in the clear, data has already been exposed. The goal
of that --force was not to prevent every situation where such an exposure
can happen -- anyone who sets up a public git repo and pushes to it will
expose things similarly and git-annex is not involved. Instead, the purpose
of the --force is to point out to the user that they're asking for a
configuration where encryption is inconsistently applied.
To use S3 Signature Version 4. Some S3 services seem to require v4, while
others may only support v2, which remains the default.
I'm also not sure if v4 works correctly in all cases, there is this
upstream bug report: https://github.com/aristidb/aws/issues/262
I've only tested it against the default S3 endpoint.
37b42e72e7 made it catch exceptions but
thought they were unlikely to be useful to display, which may be right when
a git command fails, but not in the case yoh found.
Now the warning gets displayed, which is better than an arcane git error.
The warning is still kind of ugly, especially when the pull later in the
sync will clear up what it warns about. But, this is an unusual situation
not likely to happen, and if there is no remote to pull from, the warning
message is needed or the sync will seem to succeed despite not merging the
synced master branch.
Would still be better if it could merge the synced master branch in this
situation, making an empty commit to master to do it seems wrong, and
otherwise it would need a whole separate code path, and would bypass using
git merge in favor of say, setting master to the syned branch. Which would
bypass git configs like arguably merge.ff and certianly
merge.verifySignatures. So don't want to do that.
User reported git@my.gitlab.foo:username/myrepo.git didn't work with
git-repair, because it rewrites it to an url
ssh://git@my.gitlab.foo/~/username/myrepo.git
and the /~/ was not something the hosting site supported.
Since git-annex still generally needs the repo url to be well, an url, did
not change the conversion code. But in this case, we're running git fetch,
so we might as well pass it the remote name rather than the url.
Did a quick audit of repoLocation uses to see if there was anything else
like this problem elsewhere, and didn't see any. But this is not the first
time this special case in git and git-annex's attempt to de-special-case
it has caused a problem..
* Display a warning message when a remote uses a protocol, such as
git://, that git-annex does not support. Silently skipping such a
remote was confusing behavior.
It sets annex-ignore, so the warning is only displayed once.
* Also display a warning message when a remote, without a known uuid,
is located in a directory that does not currently exist, to avoid
silently skipping such a remote.
This is a bit more debatable, since git-annex get will say,
try making repository available. And since it does not set annex-ignore,
the warning will be displayed repeatedly. It's also an extreme edge case,
I don't think I've ever seen it happen in real life.
Due to eg, too long a path to the agent socket, caused by running gpg in a
container where /run is not mounted, and/or some other gpg behavior like
unnecessarily making relative paths to its home directory absolute.
When the required content is set to "groupwanted", use whatever expression
has been set in groupwanted as the required content of the repo, similar to
how setting required content to "standard" already worked.
addurl: When run with --fast on an url that
annex.security.allowed-ip-addresses prevents accessing, display a more
useful message.
(Also importfeed --fast potentially.)
Do not sync with a faster remote that was not specified.
That old behavior was only documented in the changelog, and was certianly
surprising. It also meant adding --fast made it slower..
readonly=true is used to make an external special remote that does not
need the external program to be installed. It was stored in the
remote.log by default, and so every time it was specified in an
enableremote or initremote, whatever value was used became the new
default for subsequent enableremotes of that remote.
That was surprising, and I consider it to be a bug.
It does not make much sense to pass it to initremote because then how
would you populate that remote with anything? You would have to
enableremote elsewhere, and store content there. I'm assuming nobody
used it that way.
Someone might rely on passing it to enableremote once, and then that
being inherited in other clones. But that is not how it's documented to
be used. It is barely documented in git-annex at all, only in the
external special remote protocol, and the documentation there says to
"Document that this external special remote can be used in readonly
mode." (by the user of it passing readonly=true to enableremote). The
one external special remote that I know of that does document that is
<https://github.com/bgilbert/gcsannex> (the one that motivated adding
it). That one's docs do say to pass it to enableremote.
So, it seemed safe to make this behavior change. If someone was in fact
relying on one of those behaviors, all their current repos will still
work as they configured them (although they will need to deal
with the related change in 9f3c2dfeda).
In new clones, they will find enableremote fails, complaining the
external program is not in path. An easy enough problem to recover from.
get --from, move --from: When used with a local git remote, these used to
silently skip files that the location log thought were present on the
remote, when the remote actually no longer contained them. Since that
behavior could be surprising, now instead display a warning.
I got very confused when I encountered this behavior, since it was silently
skipping a file I needed that whereis said was on the remote.
get without --from already displayed a "unable to access these remotes"
message, which while a bit misleading in that the remote is likely
accessible, but just doesn't contain the file, at least indicated something
went wrong.
Having get --from display a warning makes it in line with get
w/o --from, so seems certianly ok. It might be there are situations where
move --from is used, on eg a whole directory, and the user only wants to
move whatever is present in the remote, and is perfectly ok with files
that are not present being skipped. So I'm less sure about the new warning
being ok there. OTOH, only local git remotes avoiding displaying a warning
in that case too, so this just brings them into line with other remotes.
(Also note that this makes it a little bit faster when dealing with a lot of
files, since it avoids a redundant stat of the file.)
Limited to min of -JN or number of CPU cores, because it will often be
CPU bound, once it's read the gitignore file for a directory.
In some situations it's more disk bound, but in any case it's unlikely
to be the main bottleneck that -J is used to avoid. Eg, when dropping,
this is used for numcopies checks, but the main bottleneck will be
accessing the remotes to verify presence. So the user might decide to
-J32 that, but having 32 check-attr processes would just waste however
many filehandles they open, and probably worsen their performance due to
CPU contention.
Note that, I first tried just letting up to the -JN be started. However,
even when it's no bottleneck at all, that still results in all of them
being started. Why? Well, all the worker threads start up nearly
simulantaneously, so there's a thundering herd..
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
Avoid repeatedly opening keys db when accessing a local git remote and -J
is used.
What was happening was that Remote.Git.onLocal created a new annex state
as each thread started up. The way the MVar was used did not prevent that.
And that, in turn, led to repeated opening of the keys db, as well as
probably other extra work or resource use.
Also managed to get rid of Annex.remoteannexstate, and it turned out there
was an unncessary Maybe in the keysdbhandle, since the handle starts out
closed.
This change does impact git-annex config
eg "git annex config --set annex.addunlocked on"
will store "on" and new git-annex will understand that value, while
old git-annex will error:
git-annex: bad annex.addunlocked configuration in git annex config:
Parse failure: near "on"
That seems acceptable.
Not special remote configs that are only documented as =true or =false
however. Having git-annex support other values for those would break
backwards compatability when used with old versions of git-annex. And
older versions ignore invalid special remote configs.. That would not
be a good combination.
Eg"core.bare" is the same as "core.bare = true".
Note that git treats "core.bare =" the same as "core.bare = false", so the
code had to become more complicated in order to treat the absense of a
value differently than an empty value. Ugh.
Git has an obnoxious special case in git config, a line "foo" is the same
as "foo = true". That means there is no way to examine the output of
git config and tell if it was run with --null or not, since a "foo"
in the first line could be such a boolean, or could be followed by its
value on the next line if --null were used.
So, rather than trying to do such a detection, track the style of config
at all the points where it's generated.
Around 3% total speedup.
Profiling git annex find --not --in web, it's now bytestring end-to-end,
and there is only a little added overhead in eg accessing the Annex
state MVar (3%). The rest of the runtime is spent reading symlinks, and
in attoparsec.
This feels like the end of the optimisation road, without a major change
like caching information for faster queries.
The only price paid is one additional MVar read per write to the journal.
Presumably writing a journal file dominiates over a MVar read time by
several orders of magnitude.
--batch does not get the speedup because then it needs to notice when
another process has made a change. Also made the assistant and other damon
modes bypass the optimisation, which would not help them anyway.
After a user completely ignored the display of the exception probably
because it didn't make sense..
This does make it a little bit slower since it checks adb is in path each
time before running it. Also, it might display a lot of warnings about it
not being installed.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Improve git-annex's ability to find the path to its program, especially
when it needs to run itself in another repo to upgrade it.
Some parts of the code used readProgramFile, probably because I forgot that
programPath exists.
I noticed this when a git-annex auto-upgrade failed because it was running
git-annex upgrade --autoonly, but the code to run git-annex used
readProgramFile, which happened to point to an older build of git-annex.
Upgrade other repos than the current one by running git-annex upgrade
inside them, which avoids problems with upgrade code making assumptions
that the cwd will be inside the repo being upgraded.
In particular, this fixes a problem where upgrading a v7 repo to v8 caused
an ugly git error message.
I actually could not find a way to make Upgrade.V7 work properly
without changing directory to the remote. Once I got git ls-files to work,
the git cat-file failed because :path can only be used in the current git
repo.
This means it will still be a .git file when git-annex init runs. That's
ok, the repo probably contains no annexed objects yet, and even if it does,
git-annex init does not care if symlinks in the worktree don't point to the
objects.
I made init, at the end, run the conversion code. Not really necessary
because the next git-annex command could do it just as well. But, this
avoids commands that don't normally write to the repo needing to write to
it, which might avoid some problem or other, and seems worth avoiding
generally.
While git ls-files can actually be used on a repo that is not in the
cwd, it works inconsistently. For example, this fails:
git --git-dir=../foo/.git --work-tree=../foo ls-files ../foo
But change some of the paths to absolute and it will succeed. That seems
like a bug in git.
OTOH, this succeeds:
git --git-dir=../foo/.git --work-tree=../foo ls-files
But, that lists paths relative to the top of the --work-tree,
rather than the usual listing them relative to the cwd. Because the cwd
is not in the repo. And so anything parsing the ls-files output of that
is likely to operate on files in the wrong location. Indeed, there is
code in Upgrade/ that has this problem!
md5sum is part of busybox, so is probably available unless it were compiled
out. If md5sum (or cut for that matter) is not available, it will
still use the whole path to $base, otherwise hash it.
Of course it's possible for md5sum to be available sometimes and not others
on the same system; in such an event the locales would be built twice for
the same bundle. The cleanup code will delete both sets once that
version of the bundle is upgraded.
git-annex config: Only allow configs be set that are ones git-annex
actually supports reading from repo-global config, to avoid confused users
trying to set other configs with this.
* whereis: If a remote fails to report on urls where a key
is located, display a warning, rather than giving up and not displaying
any information.
* When external special remotes fail but neglect to provide an error
message, say what request failed, which is better than displaying an
empty error message to the user.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
* init --version: When the version given is one that automatically
upgrades to a newer version, use the newer version instead.
* Auto upgrades from older repo versions, like v5, now jump right to v8.
Fix some cases where handling of keys with extensions varied depending on
the locale.
A filename with a unicode extension would before generate a key with an
extension in a unicode locale, but not in LANG=C, because the extension
was not all alphanumeric. Also the the length of the extension could be
counted differently depending on the locale.
In a non-unicode locale, git-annex migrate would see that the extension
was not all alphanumeric and want to "upgrade" it. Now that doesn't happen.
As far as backwards compatability, this does mean that unicode
extensions are counted by the number of bytes, not number of characters.
So, if someone is using unicode extensions, they may find git-annex
stops using them when adding files, because their extensions are too
long. Keys already in their repo with the "too long" extensions will
still work though, so this only prevents adding the same content with
the same extension generating the same key. Documented this by
documenting that annex.maxextensionlength is a number of bytes.
Also, if a filename has an extension that is not valid utf-8 and the
locale is utf-8, the extension will be allowed now, and an old
git-annex, in the same locale would not, and would also want to
"upgrade" that.
Unfortunately, cabal puts the binary in a very complicated path
and does not provide any good way to get it out, leaving no good choice
except to use find.
It may be possible to use cabal (new-)install --symlink-bindir,
and ask it to symlink to pwd, but with my older version of cabal,
that does not work.
The stack branch will probably also break once it uses a newer cabal,
didn't try to deal with that.
* Added sync --only-annex, which syncs the git-annex branch and annexed
content but leaves managing the other git branches up to you.
* Added annex.synconlyannex git config setting, which can also be set with
git-annex config to configure sync in all clones of the repo.
Use case is then the user has their own git workflow, and wants to use
git-annex without disrupting that, so they sync --only-annex to get the
git-annex stuff in sync in addition to their usual git workflow.
When annex.synconlyannex is set, --not-only-annex can be used to override
it.
It's not entirely clear what --only-annex --commit or --only-annex
--push should do, and I left that combination not documented because I
don't know if I might want to change the current behavior, which is that
such options do not override the --only-annex. My gut feeling is that
there is no good reasons to use such combinations; if you want to use
your own git workflow, you'll be doing your own committing and pulling
and pushing.
A subtle question is, how should import/export special remotes be handled?
Importing updates their remote tracking branch and merges it into master.
If --only-annex prevented that git branch stuff, then it would prevent
exporting to the special remote, in the case where it has changes that
were not imported yet, because there would be a unresolved conflict.
I decided that it's best to treat the fact that there's a remote tracking
branch for import/export as an implementation detail in this case. The more
important thing is that an import/export special remote is entirely annexed
content, and so it makes a lot of sense that --only-annex will still sync
with it.
Fix support for repositories tuned with annex.tune.branchhash1=true,
including --all not working and git-annex log not displaying anything for
annexed files.
fsck --from remote: Fix a concurrency bug that could make it incorrectly
detect that content in the remote is corrupt, and remove it, resulting in
data loss.
* When git-annex is built with a ssh that does not support ssh connection
caching, default annex.sshcaching to false, but let the user override it.
* Improve warning messages further when ssh connection caching cannot
be used, to clearly state why.
This is untested because of rain, also I am operating from truncated
copiler error messages in a bug report that also doesn't mention what the
library version is. Still, it should work.
May break builds with old ghc, in particular DerivingStrategies is
I think fairly new? The pragmas could be ifdefed if necessary. Works with
ghc 8.6.5.
A warning message is unsatisfying. But erroring out is too hard a failure,
especially since it may well work fine if the user has enabled passwordless
ssh.
I did think about falling back to one ssh connection at a time in this
case, but it would have needed a rework of every ssh call, which
seems far overboard for such a niche problem. There's no single place where
git-annex runs ssh, so no one place that it could block a concurrent call
on a semaphore. And, even if it did fall back to one ssh connection at a
time, it seems to me that doing so without warning the user about the
problem just invites bug reports like "git-annex is ignoring my -J2 and
only doing one download at a time". So a warning is needed, and I suppose
is good enough.
using git credential to get the password
One thing this doesn't do is wrap the password prompting inside the prompt
action. So with -J, the output can be a bit garbled.
Http remotes that do expose a git config file, but are not initialized
resulted in an ugly and unncessary error message, now sqelched.
When git-annex-shell configlist is run w/o the autoinit field, it may
not generate a uuid for the repository. So in that case, it's not
unexpected for the config it does list to not include a UUID, and
dumping out the config in a warning message is not needed.
If configlist is asked to autoinit and we don't get back a config with a
UUID in it, that suggests some problem, and what we got back may not be
a config at all but some diagnostic message, so it does make sense to
output it then.
The use case is basically the user having forgotten, so --help would be
best, but it would be quite hard to include this in --help, since it may
even have to spin up an external special remote program.
I also considered --umm but typoed it the first time I tried it as
--uum, and while memorable, it's too cutesy. --whatelse is good because
it explicitly asks, what other params, besides the ones I've given?
Special remote programs that use GETCONFIG/SETCONFIG are recommended
to implement it.
The description is not yet used, but will be useful later when adding a way
to make initremote list all accepted configs.
configParser now takes a RemoteConfig parameter. Normally, that's not
needed, because configParser returns a parter, it does not parse it
itself. But, it's needed to look at externaltype and work out what
external remote program to run for LISTCONFIGS.
Note that, while externalUUID is changed to a Maybe UUID, checkExportSupported
used to use NoUUID. The code that now checks for Nothing used to behave
in some undefined way if the external program made requests that
triggered it.
Also, note that in externalSetup, once it generates external,
it parses the RemoteConfig strictly. That generates a
ParsedRemoteConfig, which is thrown away. The reason it's ok to throw
that away, is that, if the strict parse succeeded, the result must be
the same as the earlier, lenient parse.
initremote of an external special remote now runs the program three
times. First for LISTCONFIGS, then EXPORTSUPPORTED, and again
LISTCONFIGS+INITREMOTE. It would not be hard to eliminate at least
one of those, and it should be possible to only run the program once.
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
Git will eventually switch to sha2 and there will not be one single
shaSize anymore, but two (40 and 64).
Changed all parsers for git plumbing output to support both sizes of
shas.
One potential problem this does not deal with is, if somewhere in
git-annex it reads two shas from different sources, and compares them
to see if they're the same sha, it would fail if they're sha1 and sha256
of the same value. I don't know if that will really be a concern.
ifAnnexed in a bare repo passes to git cat-file :./filename , which it
refuses to do since the repo is bare.
Note that, reinject somefile someannexedfile in a bare repo silently does
nothing, because someannexedfile is never actually an annexed worktree
file, because the repo is bare.
options make it easier to override annex.largefiles configuration
(and potentially safer as it avoids bugs like the smudge bug fixed
in the last release)
Deleted some old comments that were posted to the man page discussing such
options.
Updated docs that used -c annex.largefiles to use the options.
Note that addSmallOverridden was needed to avoid the clean filter running
on the file. It would be possible to make addFile also update the index
directly, rather than going via git add. However, it was not necessary,
and I want to avoid breaking on some edge case, particularly if the code in
addSmallOverridden has some oversight.
Also, when annex.addunlocked is set and annex.largefiles does not match a file,
git annex add --force-large works, but git status will then show the file
as added, with a unstaged modification. The unstaged modification adds the
file to git. This is identical behavior to using -c annex.largefiles=nothing
when annex.addunlocked is set. This does not prevent committing what was
intended to be added. I have not gotten to the bottom of why git thinks
the file is modified and runs it through the clean filter in this case.
smudge: When annex.largefiles=anything, files that were already stored in
git, and have not been modified could sometimes be converted to being
stored in the annex. Changes in 7.20191024 made this more of a problem.
This case is now detected and prevented.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
eg, `git-annex get . ..` used to order the files strangly, because it
did not realize that when git ls-files output eg "foo", that should be
grouped with the first set of files and not the second set.
Fixed by making dirContains "." "./foo" = True
which makes sense, because dirContains ".." "../foo" = True
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
e53070c1f quietly made it set the local git config too, but that was never
documented anywhere, and it had surprising results. If I set
annex.largefiles globally in a repo, I would expect to be able to change it
in another repo, and the original repo would get the change and use it,
rather than being stuck on the old value set there.
And, if I have a local annex.largefiles and set a different global default,
I'd be surprised to have my local setting overwritten.
annex.securehashesonly does need to be set locally, since it's a security
feature and the global is only a default until it gets set locally. So
special cased.
annex.largefiles can be configured by git-annex config, to more easily set
a default that will also be used by clones, without needing to shoehorn the
expression into the gitattributes file. The git config and gitattributes
override that.
Whenever something is added to git-annex config, we have to consider what
happens if a user puts a purposfully bad value in there. Or, if a new
git-annex adds some new value that an old git-annex can't parse.
In this case, a global annex.largefiles that can't be parsed currently
makes an error be thrown. That might not be ideal, but the gitattribute
behaves the same, and is almost equally repo-global.
Performance notes:
git-annex add and addurl construct a matcher once
and uses it for every file, so the added time penalty for reading the global
config log is minor. If the gitattributes annex.largefiles were deprecated,
git-annex add would get around 2% faster (excluding hashing), because
looking that up for each file is not fast. So this new way of setting
it is progress toward speeding up add.
git-annex smudge does need to load the log every time. As well as checking
the git attribute. Not ideal. Setting annex.gitaddtoannex=false avoids
both overheads.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
Used to work but was broken in version 7.20181031, specifically commit
5ab0f48ffb.
That this was not noticed over at least 1 daylight savings time zone
changes makes me wonder if the TSDelta stuff is still needed.
Perhaps the mtime on Windows no longer changes when the time zone is changed?
(cherry picked from commit 09ee6b0ccb)
* benchmark: Changed --databases to take a parameter specifiying the size
of the database to benchmark.
* benchmark --databases: Display size of the populated database.
* benchmark --databases: Improve the "addAssociatedFile to (new)"
benchmark to really add new values, not overwriting old values.
Eg:
git clone url --bare r
git --git-dir r annex init
This resulted in worktree = Just "." and so several things that check
worktree to determine when the repo is bare ran code paths intended for
non-bare. One such code path[1] ran git checkout with --worktree=. which
actually makes it ignore core.bare config, and so the current directory
got populated with a checkout of the master branch in this example. There
was probably also other breakage.
The fix is a bit complicated because whether the repo is bare is not
known until after Git.Config reads the config, but Git.Config handles
setting the RepoLocations's worktree when core.worktree is set. So have
to assume the worktree is the cwd, let core.worktree override that,
and then if the repo turns out to be bare, it's set back to Nothing.
(And then GIT_WORK_TREE can still override all of that.)
[1] switchHEADBack, which runs even when the clone is not from a bare repo.
* git-lfs: The url provided to initremote/enableremote will now be
stored in the git-annex branch, allowing enableremote to be used without
an url. initremote --sameas can be used to add additional urls.
* git-lfs: When there's a git remote with an url that's known to be
used for git-lfs, automatically enable the special remote.
Reasons to do this include:
1. I've gotten pretty used to git-annex's own progress display, which is
used for all transfers over ssh (except to old git-annex-shell),
and for most special remote transfers. It's getting to seem weird to see
the rsync progress display instead.
2. When -J was used, the rsync output could not be shown, and so there was
no progress display. Now there will be.
Progress will also be displayed now when cp CoW is used. But I'd expect a CoW
copy to typically run so fast that the progress display will barely be
noticable.
This commit was sponsored by Peter on Patreon.
So that binaries in that directory can find the library next to them,
where they get modified to look.
This is a hack; it would be better for OSXMkLibs to build a list of what
libraries are needed where.
Unsure if this is needed due to a recent reversion, or is an older
problem, so updated changelog accordingly.
Putting the binaries in bundle/git-core/bin didn't work on OSX,
linker can't find the libraries next to those binaries where it expects to.
So instead put the binaries in the progDir.
See the comment for a trace of the deadlock.
Added a new StartStage. New worker threads begin in the StartStage.
Once a thread is ready to do work, it moves away from the StartStage,
and no thread will ever transition back to it.
A thread that blocks waiting on another thread that is processing
the same key will block while in the StartStage. That other thread
will never switch back to the StartStage, and so the deadlock is avoided.
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
Used to work but was broken in version 7.20181031, specifically commit
5ab0f48ffb.
That this was not noticed over at least 1 daylight savings time zone
changes makes me wonder if the TSDelta stuff is still needed.
Perhaps the mtime on Windows no longer changes when the time zone is changed?
Fix bug that lost modifications to unlocked files when init is re-ran in an
already initialized repo.
In retrospect needing scanUnlockedFiles False in the direct mode upgrade
path was a good hint that it was unsafe when used with True.
However, this bug did not affect upgrade from v5. In such an upgrade, an
unlocked file that is modified is left as-is. The only place
scanUnlockedFiles True did overwrite modified unlocked files is during an
git-annex init of a repo that was already initialized by git-annex.
(I also tried a scenario where the repo had not been initialized by
git-annex yet, but was cloned from a v7 repo with an unlocked file, and the
pointer file replaced with some other content, and the data loss did not
occur in that situation.)
Since the fixed scanUnlockedFiles avoids overwriting non-pointer files,
it should be safe to run in any situation, so there's no need any longer
for the parameter.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
Code change should be trvial, but not yet implemented. This
significantly complicated the task of documenting how git-annex works.
I'm not sure how useful the annex.gitaddtoannex confguration is after
this change; seems that if a user has an annex.largefiles they will want
it applied consistently. But the last thing I want to hear is more
complaining from users about git add doing something they don't want it
to.
There's a pretty high risk users who got used to the git add behavior
and don't have annex.largefiles configured will miss the NEWS and
complain bitterly about their suddenly bloated repositories. Oh well.
Removed outdated comments about the old behavior to avoid confusion.
I don't know if I've found all the places that griping spread to.
Added annex.gitaddtoannex configuration. Setting it to false prevents
git add from usually adding files to the annex.
(Unless the file was annexed before, or a renamed annexed file is detected.)
Currently left at true; some users are encouraging it be set to false.
When the submodule's parent repo has an adjusted unlocked branch,
it gets cloned by git, but git checks out master. git annex init then
fails because it wants to enter the adjusted branch, but:
adjusted branch adjusted/master(unlocked) already exists.
Aborting because that branch may have changes that have not yet reached master
Note that init actually then exits 0, leaving master checked out.
This could also happen, absent submodules, if the parent repo has
an adjusted unlocked branch, but it is not checked out. In the more common
case where that branch is checked out, the clone uses the same branch,
so no problem.
The choices to fix this:
* Init could delete the existing adjusted branch, and re-adjust.
But then running init inside an adjusted branch on a crippled filesystem
would lose any changes that have not been synced back to master.
* Init could sync any changes back to master, but that would be very surprising
behavior for it.
* Init could simply check out the existing adjusted branch. If the branch
is diverged from master, well, sync will sort that out later.
This mirrors the behavior of cloning a repo that has an adjusted branch
checked out that has not yet been synced back to master.
Picked this choice.
Homebrew now has eg:
datalads-imac:~ joey$ ls -l /Users/joey/homebrew/Cellar/git/2.23.0/libexec/git-core
total 36776
lrwxr-xr-x 1 joey staff 13 Aug 29 13:38 git -> ../../bin/git
lrwxr-xr-x 1 joey staff 13 Aug 29 13:38 git-add -> ../../bin/git
So the target of the symlink also needs to be installed now.
Doing it in shell code was too hairy for my dentistry-addled brain, so
reimplemented in haskell. Also using it for building linuxstandalone.
forget --drop-dead: Remove several classes of git-annex log files when they
become empty, further reducing the size of the git-annex branch.
Noticed while testing sameas uuid removal, but it could happen other times
too.
An empty log file is always treated by git-annex the same as no file
being present, and when the files are per-key, it can be a sizable space
saving to exclude them from the tree.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
Work around git cat-file --batch's odd stripping of carriage return from
the end of the line (some windows infection), avoiding crashing when the
repo contains a filename ending in a carriage return.
When dropping an unlocked file, preserve its mtime, which avoids git status
unncessarily running the clean filter on the file.
If the index file has close to the same mtime as a work tree file, git will
not trust the index to be up-to-date, and re-runs the clean filter
unncessarily. Preserving the mtime when depopulating a pointer file avoids
git status doing a little (or maybe a lot) of unncessary work.
There are other places that the mtime could be preserved, including other
places where pointer files are written perhaps, but also
populatePointerFile. But, I don't know of cases where those lead to git
status doing unncessary work, so I just fixed the one I'm aware of for now.
fsck --incremental/--more: Fix bug that prevented the incremental fsck
information from being updated every 5 minutes as it was supposed to be; it
was only updated after 1000 files were checked, which may be more files
that are possible to fsck in a given fsck time window.
Thanks to Peter Simons for help with analysis of this bug.
Auditing for other cases of the same mistake, the keys db also had it
backwards. This seems unlikely to really have been a problem;
it would need associated files updates etc to be coming in slowly for some
reason and then be interrupted to cause any problem.
IIRC the design of the keys db assumes that any interruped
operation will be restarted, and so it can lose any buffered database
updates safely.
Fix bug in handling of annex.largefiles that use largerthan/smallerthan.
When adding a modified file, it incorrectly used the file size of the old
version of the file, not the current size.
That was the only largefiles limit that didn't directly look at the file on
disk already. Added a new type to keep straight the two different ways such
a limit can be matched. I kind of wanted to extend MatchingFile or FileInfo
to indicate that the matcher is supposed to operate on files from disk or
annex, but it turned out to be too complex to implement it that way.
This also changes the LimitAnnexFiles case when lookupFileKey does not find
a key. It used to fall back to statting the file, now it always returns
False. I doubt the old code could really get to that point, but if it
somehow does, it's better for preferred content matching to be consistent.
gksu is no longer in debian, even stable
kdesu in debian is not installed in PATH any longer, though the executable
is still present under /usr/lib
pkexec is packagekit's replacement for those older commands.
Straightforward, except for the issue of how to reverse LockAdjustment.
With --unlock, a commit that modifies/adds unlocked files gets reverse
adjusted to use locked files. That's fairly reasonable, I think.
But reversing --lock by unlocking all modified files feels wrong. Maybe
that's just because repositories typically seem to still have mostly
locked files in them (unless one is in an adjusted unlocked branch of
course!)
It may be that eventually how to reverse both will need to be configurable,
I don't know.
Had a report of close throwing ErrorBusy on CIFS.
Retrying up to 16 seconds is a balance between hopefully waiting long
enough for the problem to clear up and waiting so long that git-annex seems
to hang.
The new dependency is free; persistent depends on unliftio-core.
I just had a test that crashed at cleanup on linux with:
.t/gpgtest/12/S.gpg-agent.browser: removeDirectoryRecursive:removeContentsRecursive:removePathRecursive:removeContentsRecursive:removePathRecursive:removeContentsRecursive:removePathRecursive:getSymbolicLinkStatus: does not exist (No such file or directory)
sleeping 10 seconds and will retry directory cleanup
git-annex: .t/gpgtest/14/S.gpg-agent.browser: removeDirectoryRecursive:removeContentsRecursive:removePathRecursive:removeContentsRecursive:removePathRecursive:removeContentsRecursive:removePathRecursive:getSymbolicLinkStatus: does not exist (No such file or directory)
removePathForcibly is supposed to be more robust to things in the directory vanishing while it's running, etc.
Will probably avoid such crashes.
It was added to directory-1.2.7, which comes with ghc since 8.0.2.
Since base >= 4.11.1.0 means ghc 8.4.4, I expect all builds will have it,
but I ifdefed it to be sure.
This avoids some extra work, but I don't think it was possible for two ssh
endpoint discoveries run concurrently to both prompt for the ssh password;
Annex.Ssh itself deals with concurrency.
This is mostly groundwork for http password prompting.
This allows the rpm to be built anywhere the necessary build deps are
available (including on debian) and the resulting package will work on as
broad a range of rpm distributions as the libc/kernel supports.
The DistributionUpdate changes to use the new script have not yet been
tested.
debian oldoldstable has 2.1, and that's what i386ancient uses. It would be
better to require git 2.2, which is needed to use adjusted branches, but
can't do that w/o losing support for some old linux kernels or a
complicated git backport.
