This demonstrates concurrent behavior that looks right. And with a
random seed, the results are deterministic.
init foo
init bar
init backup
connect foo <-> bar
connect foo <-> backup
addmulti 10 testfiles 1mb 1gb foo backup
action foo gitpull backup
wanted foo nothing
wanted bar anything
wanted backup anything
action bar gitpull foo
action foo dropunwanted while action bar getwanted foo
When getting from a remote, have to check that the repo doing the
getting thinks the remote contains the key, but also that the remote
actually does. Before this bug fix, it would get from a repo that used
to have the key, but that had dropped it since the last git pull.
Had to add Read instances to Key and NumCopies and some other similar
types. I only expect to use those in serializing a sim. Of course, this
risks that implementation changes break reading old data. For a sim,
that would not be a big problem.
Not tested yet. This emulates the same checking that is done when
dropping. Note that when dropping from a special remote it is not able
to make a locked copy.
The generator doesn't emit the best possible connect commands,
but it does output something valid. Eg, an input like:
connect A <-> B <-> C <-> D
becomes:
connect A <-> B <-> C
connect C <-> D
Also:
connect A -> B <- C
becomes:
connect A -> B
connect C -> B
Which could be improved.
Also disconnect commands are not prettified at all, but probably there's
no reason to.
Detect when a preferred content expression contains "not present", which
would lead to repeatedly getting and then dropping files, and make it never
match. This also applies to "not balanced" and "not sizebalanced".
--explain will tell the user when this happens
Note that getMatcher calls matchMrun' and does not check for unstable
negated limits. While there is no --present anyway, if there was,
it would not make sense for --not --present to complain about
instability and fail to match.
Reorganized the reposize database directory, and split up a column.
checkStaleSizeChanges needs to run before needLiveUpdate,
otherwise the process won't be holding a lock on its pid file, and
another process could go in and expire the live update it records. It
just so happens that they do get called in the correct order, since
checking balanced preferred content calls getLiveRepoSizes before
needLiveUpdate.
The 1 minute delay between checks is arbitrary, but will avoid excess
work. The downside of it is that, if a process is dropping a file and
gets interrupted, for 1 minute another process can expect a repository
will soon be smaller than it is. And so a process might send data to a
repository when a file is not really going to be dropped from it. But
note that can already happen if a drop takes some time in eg locking and
then fails. So it seems possible that live updates should only be
allowed to increase, rather than decrease the size of a repository.
Only when the preferred content expression being matched uses balanced
preferred content is this overhead needed.
It might be possible to eliminate the locking entirely. Eg, check the
live changes before and after the action and re-run if they are not
stable. For now, this is good enough, it avoids existing preferred
content getting slow. If balanced preferred content turns out to be too
slow to check, that could be tried later.
This makes sure that two threads don't check balanced preferred content at the
same time, so each thread always sees a consistent picture of what is
happening.
This does add a fairly expensive file level lock to every check of
preferred content, in commands that use prepareLiveUpdate. It would
be good to only do that when live updates are actually needed, eg when
the preferred content expression uses balanced preferred content.
Fixed successfullyFinishedLiveSizeChange to not update the rolling total
when a redundant change is in RecentChanges.
Made setRepoSizes clear RecentChanges that are no longer needed.
It might be possible to clear those earlier, this is only a convenient
point to do it.
The reason it's safe to clear RecentChanges here is that, in order for a
live update to call successfullyFinishedLiveSizeChange, a change must be
made to a location log. If a RecentChange gets cleared, and just after
that a new live update is started, making the same change, the location
log has already been changed (since the RecentChange exists), and
so when the live update succeeds, it won't call
successfullyFinishedLiveSizeChange. The reason it doesn't
clear RecentChanges when there is a reduntant live update is because
I didn't want to think through whether or not all races are avoided in
that case.
The rolling total in SizeChanges is never cleared. Instead,
calcJournalledRepoSizes gets the initial value of it, and then
getLiveRepoSizes subtracts that initial value from the current value.
Since the rolling total can only be updated by updateRepoSize,
which is called with the journal locked, locking the journal in
calcJournalledRepoSizes ensures that the database does not change while
reading the journal.
It's possible for two processes or threads to both be doing the same
operation at the same time. Eg, both dropping the same key. If one
finishes and updates the rollingtotal, then the other one needs to be
prevented from later updating the rollingtotal as well. And they could
finish at the same time, or with some time in between.
Addressed this by making updateRepoSize be called with the journal
locked, and only once it's been determined that there is an actual
location change to record in the log. updateRepoSize waits for the
database to be updated.
When there is a redundant operation, updateRepoSize won't be called,
and the redundant LiveUpdate will be removed from the database on
garbage collection.
But: There will be a window where the redundant LiveUpdate is still
visible in the db, and processes can see it, combine it with the
rollingtotal, and arrive at the wrong size. This is a small window, but
it still ought to be addressed. Unsure if it would always be safe to
remove the redundant LiveUpdate? Consider the case where two drops and a
get are all running concurrently somehow, and the order they finish is
[drop, get, drop]. The second drop seems redundant to the first, but
it would not be safe to remove it. While this seems unlikely, it's hard
to rule out that a get and drop at different stages can both be running
at the same time.
I've tested the behavior of the thread that waits for the LiveUpdate to
be finished, and it does get signaled and exit cleanly when the
LiveUpdate is GCed instead.
Made finishedLiveUpdate wait for the thread to finish updating the
database.
There is a case where GC doesn't happen in time and the database is left
with a live update recorded in it. This should not be a problem as such
stale data can also happen when interrupted and will need to be detected
when loading the database.
Balanced preferred content expressions now call startLiveUpdate.
Each command that first checks preferred content (and/or required
content) and then does something that can change the sizes of
repositories needs to call prepareLiveUpdate, and plumb it through the
preferred content check and the location log update.
So far, only Command.Drop is done. Many other commands that don't need
to do this have been updated to keep working.
There may be some calls to NoLiveUpdate in places where that should be
done. All will need to be double checked.
Not currently in a compilable state.
A new repo that has no location log info yet, but has an entry in
uuid.log has 0 size, so make RepoSize aware of that.
Note that a new repo that does not yet appear in uuid.log will still not
be displayed.
When a remote is added but not synced with yet, it has no uuid.log
entry. If git-annex maxsize is used to configure that remote, it needs
to appear in the maxsize table, and the change to Command.MaxSize takes
care of that.
When the specified number of copies is > 1, and some repositories are
too full, it can be better to move content from them to other less full
repositories, in order to make space for new content.
annex.fullybalancedthreshhold is documented, but not implemented yet
This is not tested very well yet, and is known to sometimes take several
runs to stabalize.
Might want to make --rebalance turn balanced=group:N where N > 1
to fullysizebalanced=group:N. Have not yet determined if that will
improve situations enough to be worth the extra work.
The use of catObjectStream is optimally fast. Although it might be
possible to combine this with git-annex branch merge to avoid some
redundant work.
Benchmarking, a git-annex branch that had 100000 files changed
took less than 1.88 seconds to run through this.
At this point the RepoSize database is getting populated, and it
all seems to be working correctly. Incremental updates still need to be
done to make it performant.
Including locking on creation, handling of permissions errors, and
setting repo sizes.
I'm confident that locking is not needed while using this database.
Since writes happen in a single transaction. When there are two writers
that are recording sizes based on different git-annex branch commits,
one will overwrite what the other one recorded. Which is fine, it's only
necessary that the database stays consistent with the content of a
git-annex branch commit.
Plan is to run this when populating Annex.reposizes on demand.
So Annex.reposizes will be up-to-date with the journal, including
crucially journal entries for private repositories. But also
anything that has been written to the journal by another process,
especially if the process was ran with annex.alwayscommit=false.
From there, Annex.reposizes can be kept up to date with changes made
by the running process.
This is very innefficient, it will need to be optimised not to
calculate the sizes of repos every time.
Also, fixed a bug in balancedPicker that caused it to pick a too high
index when some repos were excluded due to being full.
This deals with the possible security problem that someone could make an
unusually low UUID and generate keys that are all constructed to hash to
a number that, mod the number of repositories in the group, == 0.
So balanced preferred content would always put those keys in the
repository with the low UUID as long as the group contains the
number of repositories that the attacker anticipated.
Presumably the attacker than holds the data for ransom? Dunno.
Anyway, the partial solution is to use HMAC (sha256) with all the UUIDs
combined together as the "secret", and the key as the "message". Now any
change in the set of UUIDs in a group will invalidate the attacker's
constructed keys from hashing to anything in particular.
Given that there are plenty of other things someone can do if they can
write to the repository -- including modifying preferred content so only
their repository wants files, and numcopies so other repositories drom
them -- this seems like safeguard enough.
Note that, in balancedPicker, combineduuids is memoized.
This all works fine. But it doesn't check repository sizes yet, and
without repository size checking, once a repository gets full, there
will be no other repository that will want its files.
Use of sha2 seems unncessary, probably alder2 or md5 or crc would have
been enough. Possibly just summing up the bytes of the key mod the number
of repositories would have sufficed. But sha2 is there, and probably
hardware accellerated. I doubt very much there is any security benefit
to using it though. If someone wants to construct a key that will be
balanced onto a given repository, sha2 is certianly not going to stop
them.
This removes versionedExport, which was only used by the S3 special
remote. Instead, versionedexport=yes is a common way for remotes to
indicate that they are versioned.
This is not perfect because it does not handle versioned special
remotes, which should not be untrustworthy, but now are when proxied.
The implementation turned out to be easy, because the exporttree field
is a default field, so is available in RemoteConfig even for git
remotes.
This handles cases where a single key is used by multiple files in the
exported tree. When using `git-annex push`, the key's content gets
stored in the annexobjects location, and then when the branch is pushed,
it gets renamed from the annexobjects location to the first exported
file. For subsequent exported files, a copy of the content needs to be
made. This causes it to download the key from the remote in order to
upload another copy to it.
This is not needed when using `git push` followed by `git-annex copy --to`
the proxied remote, because the received key is stored at all export
locations then.
Also, fixed handling of the synced branch push, it was exporting master
when synced/master was pushed.
Note that currently, the first push to the remote does not see that it
is able to get a key from it in order to upload it back. It displays
"(not available)". The second push is able to. Since git-annex push
pushes first the synced branch and then the branch, this does end up
with a full export being made, but it is not quite right.
This is similar to git-annex copy --from --to, in that it downloads a
local copy, locks it for removal, uploads it, and drops it. Removal of
the temporary local copy is done without verifying numcopies for the
same reason as that command.
I do wonder, looking at this, if there's a race where the local copy
gets used as a copy to allow some other drop in the narrow window after
it is downloaded and before it gets locked for removal. That would need
some other repository to have an out of date location log that says the
repository contains a copy of the key, in order for it to try to use it
as a copy. If there is such a race, git-annex copy/move would also be
vulnerable to it. It would be better to lock it for removal before
starting to download it! That is possible in v10 repositories, which do
use a separate content lock file.
Note that, when the exported tree contains several files that use the
same key, it will be downloaded repeatedly, once per time needed to
upload it. It would be possible to avoid that extra work, but it would
complicate this since the local copy would need to be preserved, locked
for removal, until the end. Also, that would mean that interrupting the
export would leave possibly a lot of temporarily downloaded keys in the
local repository, while currently it can only leave one.
Since git-annex sync sends the sync branch first, and only displays the
output of the push to the sync branch, this makes git-annex
post-retrieve's output when updating the exported tree be visible when
syncing.
This also makes syncing with a non-bare repository still update the
exported tree, even when the checked out branch is not able to be
updated. The sync branch gets sent regardless.
When getting from a P2P HTTP remote, prompt for credentials when required,
instead of failing.
This feels like it might be a bug in servant-client. withClientM's type
suggests it would not throw a ClientError. But it does in this case.
This handles the workflow where the branch is first pushed to the proxy,
and then files in the exported tree are later are copied to the proxied remote.
Turns out that the way the export log is structured, nothing needs
to be done to finalize the export once the last key is sent to it. Which
is great because that would have been a lot of complication. On
receiving the push, Command.Export runs and calls recordExportBeginning,
does as much as it can to update the export with the files currently
on it, and then calls recordExportUnderway. At that point, the
export.log records the export as "complete", but it's not really. And
that's fine. The same happens when using `git-annex export` when some
files are not available to send. Other repositories that have
access to the special remote can already retrieve files from it. As
the missing files get copied to the exported remote, all that needs
to be done is record each in the export db.
At this point, proxying to exporttree=yes annexobjects=yes special remotes
is fully working. Except for in the case where multiple files in the
tree use the same key, and the files are sent to the proxied remote
before pushing the tree.
It seems that even special remotes without annexobjects=yes will work if
used with the workflow where the git-annex branch is pushed before
copying files. But not with the `git-annex push` workflow.
It works when using git-annex sync/push/assist, or when manually sending
all content to the proxied remote before pushing to the proxy remote.
But when the push comes before the content is sent, sending content does
not update the exported tree.
(When possible, of course it may not be there, or it may get renamed from
there for another exported file first. Or the remote may not support
renames.)
This will avoids redundant uploads.
An example case where this is important: Proxying to a exporttree remote,
a file is uploaded to it but is not yet in an exported tree. When the
exported tree is pushed, the remote needs to be updated by exporting to
it. In this case, the proxy doesn't have a copy of the file, so it would
need to download it from annexobjects before uploading it to the final
location. With this optimisation, it can just rename it.
However: If a key is used twice in an exported tree, it seems a proxy
will need to download and reupload anyway. Unless a copy operation is
added to exporttree remotes..
This avoids needing to re-upload the file again to get it to the
annexobjects location, which git-annex sync was doing when it was
preferred content.
If the file is not preferred content, sync will drop it from the
annexobjects location.
If the file has been deleted from the tree, it will remain in the
annexobjects location until an unused/dropunused pass is done.
Decided not to use the annexobjects location for exportTempName.
There doesn't seem to be any actual benefit to doing that, because an
export that renames to exportTempName always renames it back from that
to another location.
Also the annexobjects directory won't actually help with the paired
rename issue.
The file in the annexobjects location may have been renamed from a
previously exported file that got deleted in a subsequent export.
Or it may be renamed to annexobjects temporarily before being renamed to
another name (to handle eg pairwise renames).
But, an exported file is not guaranteed to contain the content of the
key that the local repository last exported there. Another tree could
have been exported from elsewhere in the meantime.
So, files in annexobjects do not necessarily have the content of their
key. And so have to be strongly verified when retrieving. The same as
is done when retrieving exported files.
This fixes a problem with datalad's test suite, where loading the cluster
log happened to cause the git-annex branch commits to take a different
shape, with an additional commit.
It's also faster though, since many commands don't need the cluster log.
Just fill Annex.clusters with a thunk.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
While usually uploading to a special remote does not verify the content,
the content in a repository is assumed to be valid, and there is no trust
boundary. But with a proxied special remote, there may be users who are
allowed to store objects, but are not really trusted.
Another way to look at this is it's the equivilant of git-annex-shell
checking the hash of received data, which it does (see StoreContent
implementation).
An interrupted PUT to cluster that has a node that is a special remote
over http left open the connection to the cluster, so the next request
opens another one. So did an interrupted PUT directly to the proxied
special remote over http.
proxySpecialRemote was stuck waiting for all the DATA. Its connection
remained open so it kept waiting.
In servePut, checktooshort handles closing the P2P connection
when too short a data is received from PUT. But, checktooshort was only
called after the protoaction, which is what runs the proxy, which is
what was getting stuck. Modified it to run as a background thread,
which waits for the tooshortv to be written to, which gather always does
once it gets to the end of the data received from the http client.
That makes proxyConnection's releaseconn run once all data is received
from the http client. Made it close the connection handles before
waiting on the asyncworker thread. This lets proxySpecialRemote finish
processing any data from the handle, and then it will give up,
more or less cleanly, if it didn't receive enough data.
I say "more or less cleanly" because with both sides of the P2P
connection taken down, some protocol unhappyness results. Which can lead
to some ugly debug messages. But also can cause the asyncworker thread
to throw an exception. So made withP2PConnections not crash when it
receives an exception from releaseconn.
This did have a small change to the behavior of an interrupted PUT when
proxying to a regular remote. proxyConnection has a protoerrorhandler
that closes the proxy connection on a protocol error. But the proxy
connection is also closed by checktooshort when it closes the P2P
connection. Closing the same proxy connection twice is not a problem,
it just results in duplicated debug messages about it.
An interrupted `git-annex copy --to` a cluster via the http server,
when repeated, failed. The http server output "transfer already in
progress, or unable to take transfer lock". Apparently a second
connection was opened to the cluster, because the first connection
never got shut down.
Turned out the problem was that when proxying to a cluster, it would read a
short ByteString from the client, and send that to the nodes. But that left the
nodes warning more. Meanwhile, the proxy was expecting a SUCCESS/FAILURE
message from the nodes. So it didn't return, and so the cluster connection
stayed open.
This fixes a problem when git-annex testremote is run against a cluster
accessed via the http server. Annex.Cluster uses the location log
to find nodes that contain a key when checking if the key is present or getting
it. Just after a key was stored to a cluster node, reading the location log
was not getting the UUID of that node.
Apparently the Annex action that wrote to the location log, and the one
that read from it were run with two different Annex states. The http server
does use several different Annex threads.
BranchState was part of the AnnexState, and so two threads could have
different BranchStates.
Moved BranchState to the AnnexRead, so all threads will see the common state.
This might possibly impact performance. If one thread is writing changes to the
branch, and another thread is reading from the branch, the writing thread will
now invalidate the BranchState's cache, which will cause the reading thread to
need to do extra work. But correctness is surely more important. If did is
found to have impacted performance, it could probably be dealt with by doing
smarter BranchState cache invalidation.
Another way this might impact performance is that the BranchState has a small
cache. If several threads were reading from the branch and relying on the value
they just read still being in the case, now a cache miss will be more likely.
Increasing the BranchState cache to the number of jobs might be a good
idea to amelorate that. But the cache is currently an innefficient list,
so making it large would need changes to the data types.
(Commit 4304f1b6ae dealt with a follow-on
effect of the bug fixed here.)
Wired it up and it seems to basically work, although the test suite is
not fully passing.
Note that --jobs currently gets multiplied by the number of nodes in the
cluster, which is probably not good.
proxyRequest was treating UNLOCKCONTENT as a separate request.
That made it possible for there to be two different connections to the
proxied remote, with LOCKCONTENT being sent to one, and UNLOCKCONTENT
to the other one. A protocol error.
git-annex testremote now passes against a http proxied remote.
sendExactly will now be sure to evaluate the whole lazy ByteString.
In this case, the lazy ByteString was exactly the right lenth.
But, it seems that L.take caused it to not actually be fully evaluated.
In servePut, this manifested as gather never being fully evaluated,
which caused the hang.
Very, very subtle, and horrible bug. Clearly the use of lazy ByteString
(or really just laziness) is at fault, and it would be very worth moving
to conduit or whatever to avoid this.
removeOldestProxyConnectionPool will be innefficient the larger the pool
is. A better data structure could be more efficient. Eg, make each value
in the pool include the timestamp of its oldest element, then the oldest
value can be found and modified, rather than rebuilding the whole Map.
But, for pools of a few hundred items, this should be fine. It's O(n*n log n)
or so.
Also, when more than 1 connection with the same pool key exists,
it's efficient even for larger pools, since removeOldestProxyConnectionPool
is not needed.
The default of 1 idle connection could perhaps be larger.. like the
number of jobs? Otoh, it seems good to ramp up and down the number of
connections, which does happen. With 1, there is at most one stale
connection, which might cause a request to fail.
The proxy always checks the protocol version of a remote before talking
to it in a version-specific way, so the protocol version in the ProxyParams
is the client's protocol version. The remote will always be at the same or
an older protocol version than the client.
Note that in relayDATAFinish, when the client is at protocol version 0,
the remote must thus be as well, and that's why its version is not
checked in the case for that.
With that clarified, it's evident that, in P2P.Http.State, there's no
need to look at the proxied remote's protocol version at all.
