On Windows, that does not support long paths
https://github.com/jacobstanley/unix-compat/issues/56
Instead, use System.Directory.renamePath, which does support long paths.
Sponsored-by: Dartmouth College's Datalad project
The webapp modules cannot build with the assistant disabled, so make the
webapp be under the assistant build flag.
Sponsored-by: Jarkko Kniivilä on Patreon
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
Improve handling of parallelization with -J when copying content from/to a
git remote that is a local path.
Sponsored-by: Nicholas Golder-Manning on Patreon
At this point I've checked all AnnexState values and these were all that
remained that could move.
Pity that Annex.repo can't move, but it gets modified sometimes..
A couple of AnnexState values are set by options and could be AnnexRead,
but happen to use Annex when being set.
Sponsored-by: Max Thoursie on Patreon
When adding a small file, it does not get locked down, so can be modified
after git-annex checks that it's small. The use of queued git add made the
race window nice and wide too.
Fixed by checking if the file has changed, and by not using git add.
Instead, have to recapitulate git add's handling of things like symlinks
and executable files.
Sponsored-by: Jochen Bartl on Patreon
The remaining callers all did not rely on it checking gitignore, so were
easy to convert.
They were susceptable to the same overwrite race as add and fix,
although less likely to have it and a narrower window than add's race.
Command.Rekey in passing got an unncessary call to removeFile deleted.
addSymlink handles deleting any existing worktree file.
This is not a complete fix for all such races, only the one where a
large file gets changed while adding and gets added to git rather than
to the annex.
addLink needs to go away, any caller of it is probably subject to the
same kind of race. (Also, addLink itself fails to check gitignore when
symlinks are not supported.)
ingestAdd no longer checks gitignore. (It didn't check it consistently
before either, since there were cases where it did not run git add!)
When git-annex import calls it, it's already checked gitignore itself
earlier. When git-annex add calls it, it's usually on files found
by withFilesNotInGit, which handles checking ignores.
There was one other case, when git-annex add --batch calls it. In that
case, old git-annex behaved rather badly, it would seem to add the file,
but git add would later fail, leaving the file as an unstaged annex symlink.
That behavior has also been fixed.
Sponsored-by: Brett Eisenberg on Patreon
move: Improve resuming a move that succeeded in transferring the content,
but where dropping failed due to eg a network problem, in cases where
numcopies checks prevented the resumed move from dropping the object from
the source repository.
This was earlier done for moves that got interrupted during the drop stage.
Sponsored-by: Svenne Krap on Patreon
Fix retrival of an empty file that is stored in a special remote with
chunking enabled.
The speculative chunk stuff caused a reversion by adding an empty list for
the empty file. Which is just wrong; the empty file is still stored on the
remote, and should be retrieved like any other file. It uses 1 chunk, so
`max 1` is the simple fix.
Sponsored-by: Noam Kremen on Patreon
rather than matching path of an existing remote to find the uuid.
The main benefit of this is that locations not using ssh:// will work
now, including both paths and host:/path
The other benefit is that it's a simpler interface, no need to have an
existing remote with the same url and some other name. Although that
will still work of course.
This does rely on tryGitConfigRead working when given a Git.Repo that is
not a remote. Luckily, it works fine that way.
Also, tryGitConfigRead will auto-init a local repo that has a git-annex
branch. I did not enable auto-init of ssh repos though.
The uuid discovery actually happens twice; initremote discovers it,
and uses it to store the special remote config, but does not set it in the
git remote it creates. So the next run of git-annex does uuid discovery
again, and caches it that time. This could be improved for a tiny
speedup, but I didn't want to complicate things for that in this
commit.
Sponsored-by: Dartmouth College's DANDI project
to track down a blocked indefinitely on MVar that seems to occur after
sqlite throws ErrorBusy but that I have not been able to reproduce when
I made commits synthetically throw ErrorBusy.
Sponsored-by: Dartmouth College's Datalad project
Use cases include using git-annex init --no-autoenable and then going back
and enabling the special remotes that have autoenable configured. As well
as just querying to remember which ones have it enabled.
It lists all special remotes that have autoenable=yes whether currently
enabled or not. And it can be used with --json.
I pondered making this "git-annex info autoenable", but that seemed wrong
because then if the use has a directory named "autoenable", it's unclear
what they are asking for. (Although "git-annex info remote" may be
similarly unclear.) Making it an option does mean that it can't be provided
via --batch though.
Sponsored-by: Dartmouth College's Datalad project
Someone may disagree with what repositories are set to autoenable and
it's good to have local overrides.
See https://github.com/datalad/datalad/issues/6634
Sponsored-by: Dartmouth College's Datalad project
test: When limiting tests to run with -p, work around tasty limitation by
automatically including dependent tests.
This fixes a reversion because it didn't used to use dependencies and
forced tasty to run the init tests first. That changed when parallelizing
the test suite.
It will sometimes do a little more work than strictly required,
because it adds init tests deps when limited to eg quickcheck tests,
which don't depend on them. But this only adds a few seconds work.
Sponsored-by: Dartmouth College's Datalad project
This reverts windows-specific parts of 5a98f2d509
There were no code paths in common between windows and unix, so this
will return Windows to the old behavior.
The problem that the commit talks about has to do with multiple different
locations where git-annex can store annex object files, but that is not
too relevant to Windows anyway, because on windows the filesystem is always
treated as criplled and/or symlinks are not supported, so it will only
use one object location. It would need to be using a repo populated
in another OS to have the other object location in use probably.
Then a drop and get could possibly lead to a dangling lock file.
And, I was not able to actually reproduce that situation happening
before making that commit, even when I forced a race. So making these
changes on windows was just begging trouble..
I suspect that the change that caused the reversion is in
Annex/Content/Presence.hs. It checks if the content file exists,
and then called modifyContentDirWhenExists, which seems like it would
not fail, but if something deleted the content file at that point,
that call would fail. Which would result in an exception being thrown,
which should not normally happen from a call to inAnnexSafe. That was a
windows-specific change; the unix side did not have an equivilant
change.
Sponsored-by: Dartmouth College's Datalad project
setEnv is not thread safe and could cause a getEnv by another thread to
segfault, or perhaps other had behavior. This is particularly a problem
when using tasty, because tasty runs the test in a thread, and a getEnv
in another thread.
The use of top-level TMVars is ugly, but ok because only 1 test actually
runs at a time per process. Because it has to chdir into the test repo.
The setEnv that remains happens before tasty is running.
Sponsored-by: Dartmouth College's Datalad project
setEnv is not thread safe and could cause a getEnv by another thread to
segfault, or perhaps other had behavior.
Sponsored-by: Dartmouth College's Datalad project
The purpose of this is to fix situations where the annex object file is
stored in a directory structure other than where annex symlinks point to.
But it will also move object files from the hashdirmixed back to
hashdirlower if the repo configuration makes that the normal location.
It would have been more work to avoid that than to let it do it.
Sponsored-by: Dartmouth College's Datalad project
If the content directory does not exist, then it does not make sense to
lock the content file, as it also does not exist, and so it's ok for the
lock operation to fail.
This avoids potential races where the content file exists but is then
deleted/renamed, while another process sees that it exists and goes to
lock it, resulting in a dangling lock file in an otherwise empty object
directory.
Also renamed modifyContent to modifyContentDir since it is not only
necessarily used for modifying content files, but also other files in
the content directory.
Sponsored-by: Dartmouth College's Datalad project
Added support for "megabit" and related bandwidth units in
annex.stalldetection and everywhere else that git-annex parses data units.
Note that the short form is "Mbit" not "Mb" because that differs from "MB"
only in case, and git-annex parses units case-insensitively. It would be
horrible if two different versions of git-annex parsed the same value
differently, so I don't think "Mb" can be supported.
See comment for bonus sad story from my childhood.
Sponsored-by: Nicholas Golder-Manning
Avoid treating refs/annex/last-index or other refs that are not commit
objects as evidence of repository corruption.
The repair code checks to find bad refs by trying to run `git log` on
them, and assumes that no output means something is broken. But git log
on a tree object is empty.
This was worth fixing generally, not as a special case, since it's certainly
possible that other things store tree or other objects in refs.
Sponsored-by: Max Thoursie on Patreon
rsync 3.2.4 broke backwards-compatability by preventing exposing filenames
to the shell. Made the rsync and gcrypt special remotes detect this and
disable shellescape.
An alternative fix would have been to always set RSYNC_OLD_ARGS=1.
Which would avoid the overhead of probing rsync --help for each affected
remote. But that is really very fast to run, and it seemed better to switch
to the modern code path rather than keeping on using the bad old code path.
Sponsored-by: Tobias Ammann on Patreon
This avoids displaying the unexpected exit codes message when
the list is eg [ExitSuccess, ExitFailure 1].
Sponsored-by: Dartmouth College's Datalad project
If the temp directory can somehow contain a hard link, it changes the
mode, which affects all other hard linked files. So, it's too unsafe
to use everywhere in git-annex, since hard links are possible in
multiple ways and it would be very hard to prove that every place that
uses a temp directory cannot possibly put a hard link in it.
Added a call to removeDirectoryForCleanup to test_crypto, which will
fix the problem that commit 17b20a2450
was intending to fix, with a much smaller hammer.
Sponsored-by: Dartmouth College's Datalad project
Using removePathForcibly avoids concurrent removal problems.
The i386ancient build still uses an old version of ghc and directory that
do not include removePathForcibly though.
Sponsored-by: Dartmouth College's Datalad project
Tagging todos that seem to have a plan ready as confirmed.
Also closed some old ones for various reasons. Including several that
turn out to be addressed by newer features.
Also opened a new todo about git-annex-config needing a criteria to add
new configs to it.
assistant: When annex.autocommit is set, notice commits that the user makes
manually, and push them out to remotes promptly.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
prop_relPathDirToFileAbs_basics (TestableFilePath ":/") failed on
windows. The colon was filtered out after trying to make
the path relative, which only removed leading path separators.
So, ":/" changed to "/" which is not relative. Filtering out the colon
before hand avoids this problem.
Sponsored-by: Luke Shumaker on Patreon
add: Avoid unncessarily converting a newly unlocked file to be stored
in git when it is not modified, even when annex.largefiles does not
match it.
This fixes a reversion in version 10.20220222, where git-annex unlock
followed by git-annex add, followed by git commit file could result in
git thinking the file was modified after the commit.
I do have half a mind to remove the withUnmodifiedUnlockedPointers part
of git-annex add. It seems weird, despite that old bug report arguing
a case of consistency that it ought to behave that way. When git-annex
add surpises me, it seems likely it's wrong.. But for now, this is the
smallest possible fix.
Sponsored-by: Dartmouth College's Datalad project
Directory special remotes with importtree=yes have changed to once more
take inodes into account. This will cause extra work when importing from a
directory on a FAT filesystem that changes inodes on every mount.
To avoid that extra work, set ignoreinodes=yes when initializing a new
directory special remote, or change the configuration of your existing
remote: git-annex enableremote foo ignoreinodes=yes
This will mean a one-time re-import of all contents from every directory
special remote due to the changed setting.
73df633a62 thought
it was too unlikely that there would be modifications that the inode number
was needed to notice. That was probably right; it's very unlikely that a
file will get modified and end up with the same size and mtime as before.
But, what was not considered is that a program like NextCloud might write
two files with different content so closely together that they share the
mtime. The inode is necessary to detect that situation.
Sponsored-by: Max Thoursie on Patreon
Default to the number of CPU cores, which seems about optimal
on my laptop. Using one more saves me 2 seconds actually.
Better packing of workers improves speed significantly.
In 2 tests runs, I saw segfaulting workers despite my attempt
to work around that issue. So detect when a worker does, and re-run it.
Removed installSignalHandlers again, because I was seeing an
error "lost signal due to full pipe", which I guess was somehow caused
by using it.
Sponsored-by: Dartmouth College's Datalad project
Note the very weird workaround for what appears to be some kind of tasty
bug, which causes a segfault. This is not new to this modification,
I was seeing a segfault before at least intermittently when limiting
git-annex test -p to only run a single test group.
Also, the path from one test repo to a remote test repo used to be
"../../foo", which somehow broke when moving the test repos from .t to
.t/N. I don't actually quite understand how it used to work, but
"../foo" seems correct and works in the new situation.
Test output from the concurrent processes is not yet serialized.
Should be easy to do using concurrent-output.
More test groups will probably make the speedup larger. It would
probably be best to have a larger number of test groups and divvy them
amoung subprocesses numbered based on the number of CPU cores, perhaps
times 2 or 3.
Sponsored-by: Dartmouth College's Datalad project
Avoid git-annex test being very slow when run from within the standalone
linux tarball or OSX app.
It may not really be necessary to add to PATH the directory where the
git-annex binary resides, but it can't hurt. Most places where the test
suite or git-annex run git-annex, they use programPath, so won't need
a modified PATH. But I'm not sure if that's always the case.
Sponsored-by: Dartmouth College's Datalad project
I cannot find any indication that git-annex uses these exit statuses,
and I see I didn't write this doc so I don't know where those numbers
came from. Odd.
Propagate nonzero exit status from git ls-files when a specified file does
not exist, or a specified directory does not contain any files checked into
git.
The recent completion of the annex.skipunknown transition exposed this
bug, that has unfortunately been lurking all along.
It is also possible that git ls-files errors out for some other reason
-- perhaps a permission problem -- and this will also fix error propagation
in such situations.
Sponsored-by: Dartmouth College's Datalad project
It did nothing, since at this point the link is dangling. But when there
is a thaw hook, it would probably not be happy to be asked to run on a
symlink, or might do something unexpected.
Sponsored-by: Dartmouth College's Datalad project
When annex.freezecontent-command is set, and the filesystem does not
support removing write bits, avoid treating it as a crippled filesystem.
The hook may be enough to prevent writing on its own, and some filesystems
ignore attempts to remove write bits.
Sponsored-by: Dartmouth College's Datalad project
It will then proceed to add the file the same as if it were any other
file containing possibly annexable content. Usually the file is one that
was annexed before, so the new, probably corrupt content will also be added
to the annex. If the file was not annexed before, the content will be added
to git.
It's not possible for the smudge filter to throw an error here, because
git then just adds the file to git anyway.
Sponsored-by: Dartmouth College's Datalad project
This format is designed to detect accidental appends, while having some
room for future expansion.
Detect when an unlocked file whose content is not present has gotten some
other content appended to it, and avoid treating it as a pointer file, so
that appended content will not be checked into git, but will be annexed
like any other file.
Dropped the max size of a pointer file down to 32kb, it was around 80 kb,
but without any good reason and certianly there are no valid pointer files
anywhere that are larger than 8kb, because it's just been specified what it
means for a pointer file with additional data even looks like.
I assume 32kb will be good enough for anyone. ;-) Really though, it needs
to be some smallish number, because that much of a file in git gets read
into memory when eg, catting pointer files. And since we have no use cases
for the extra lines of a pointer file yet, except possibly to add
some human-visible explanation that it is a git-annex pointer file, 32k
seems as reasonable an arbitrary number as anything. Increasing it would be
possible, eg to 64k, as long as users of such jumbo pointer files didn't
mind upgrading all their git-annex installations to one that supports the
new larger size.
Sponsored-by: Dartmouth College's Datalad project
File matching options like --include will be rejected in situations where
there is no filename to match against. (Or where there is a filename but
it's not relative to the cwd, or otherwise seemed too bothersome to match
against.)
The addition of listKeys' was necessary to avoid using more memory in the
common case of "git-annex info". Adding a filterM would have caused the
list to buffer in memory and not stream. This is an ugly hack, but listKeys
had previously run Annex operations inside unafeInterleaveIO (for direct
mode). And matching against a matcher should hopefully not change any Annex
state.
This does allow for eg `git-annex info somefile --include=*.ext`
although why someone would want to do that I don't really know. But it
seems to make sense to allow it.
But, consider: `git-annex info ./somefile --include=somefile`
This does not match, so will not display info about somefile.
If the user really wants to, they can `--include=./somefile`.
Using matching options like --copies or --in=remote seems likely to be
slower than git-annex find with those options, because unlike such
commands, info does not have optimised streaming through the matcher.
Note that `git-annex info remote` is not the same as
`git-annex info --in remote`. The former shows info about all files in
the remote. The latter shows local keys that are also in that remote.
The output should make that clear, but this still seems like a point
where users could get confused.
Sponsored-by: Jochen Bartl on Patreon
Implemented by making Git.Queue have a FlushAction, which can accumulate
along with another action on files, and runs only once the other action has
run.
This lets git-annex unlock queue up git update-index actions, without
conflicting with the restagePointerFiles FlushActions.
In a repository with filter-process enabled, git-annex unlock will
often not take any more time than before, though it may when the files are
large. Either way, it should always slow down less than git-annex status
speeds up.
When filter-process is not enabled, git-annex unlock will slow down as much
as git status speeds up.
Sponsored-by: Jochen Bartl on Patreon
This avoids a later git status or similar taking a long time to run
as it runs git-annex smudge once per file. While v9 repositories do
avoid that taking long when the files are small, large files can still
make git status take a very long time.
This does make unlock slower, because now git-annex smudge is being run
once per file unlocked. However, the next commit should speed that up in
many cases.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
annex.skipunknown now defaults to false, so commands like `git annex get foo*`
will not silently skip over files/dirs that are not checked into git.
Sponsored-by: Brock Spratlen on Patreon
* registerurl, unregisterurl: Improved output when reading from stdin
to be more like other batch commands.
* registerurl, unregisterurl: Added --json and --json-error-messages options.
Note that this did change the --batch output in a way that could possibly
break something that expected the old output to never change. I think it's
acceptable to break that because there has never been a guarantee of
unchanging output format except with --batch for most commands. The old
output was just really weird too!
One possible wart is that "git-annex registerurl" with no options now
seems to just hang, since it's waiting for stdin input. Before, it said
"registerurl (stdin)" which was clearer about what's happenening. But this
is a deprecated mode anyway, --batch makes clear what's happening. If
anything, this problem would be a reason to eventually remove the support
for reading from stdin w/o --batch.
Sponsored-by: Dartmouth College's Datalad project
takeByteString can only be used at the end of a parser, not before other
input. This was a dumb enough mistake that I audited the rest of the
code base for similar mistakes. Pity that attoparsec cannot avoid it at
the type level.
Fixes git-annex forget propagation between repositories. (reversion
introduced in version 7.20190122)
Sponsored-by: Brock Spratlen on Patreon
Seems that --no-ext-diff and -c diff.external= are not enough to disable
external diff command when gitattributes textconv specifies it.
I'm pretty sure that --no-ext-diff and -c diff.external= are not both
needed, but not 100%. Something about -G may need the latter to fully
disable diffs in some cases. So kept that part as it was.
Sponsored-by: Dartmouth College's Datalad project
The "+" argument only runs the command once, so is not safe to use. Using
";" instead would have been the simplest fix, but also the slowest.
Since my phone has an xargs that supports -0, I piped find to xargs
instead. Unsure how portable this will be, perhaps some android's don't
have xargs -0 or find -printf to send null terminated output.
The business with pipefail is necessary to make a failure of find cause the
import to fail. Probably this works on all androids, but if not, it will
probably just result in a failure of find being ignored. It would be
possible to make ignorefinderror just disable setting pipefail, but then
if some android has a shell that has pipefail enabled by default, ignorefinderror
would not work, so I kept the || true approach for that.
Sponsored-by: Max Thoursie on Patreon
eg, git-annex init --version=9 does not use v10 even though v9 can
automatically upgrade to v10, because v9 is a supported version. It's
only unsupported versions that make a newer version be used.
Reject combinations of --batch (or --batch-keys) with options like --all or
--key or with filenames.
Most commands ignored the non-batch items when batch mode was enabled.
For some reason, addurl and dropkey both processed first the specified
non-batch items, followed by entering batch mode. Changed them to also
error out, for consistency.
Sponsored-by: Dartmouth College's Datalad project
