This avoids warnings from stack about the module not being listed in the
cabal file. So, the generated file is also renamed to Build/SysConfig.
Note that the setup program seems to be cached despite these changes; I
had to cabal clean to get cabal to update it so that Build/SysConfig was
written.
This commit was sponsored by Jochen Bartl on Patreon.
Needed so that the assistant can download from exports.
updateExportTreeFromLog is normally only run one time, but needs to be
run repeatedly during the lifetime of the assistant.
This commit was sponsored by Ethan Aubin on Patreon.
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
Split exportRemotes out from syncDataRemotes; the parts of the assistant
that upload keys and drop keys from remotes don't apply to exports,
because those operations are not supported.
Some parts of the assistant and webapp do operate on both
syncDataRemotes and exportRemotes. Particularly when downloading from
either of them. Added a downloadRemotes that combines both.
With this, the assistant should download from exports, but it won't yet
upload changes to them.
This commit was sponsored by Fernando Jimenez on Patreon.
Previously, only sync branches were merged. This makes regular git push
into a repository watched by the assistant auto-merge.
While this does hardcode an assumption about what the remote tracking
branch is named, which some unusual git configurations won't match,
git-annex sync already made the same assumption.
Also, changed behavior when a tracking branch like
refs/remotes/synced/not/master is received. When on the master branch,
that used to get merged into it, but it's the tracking branch for
not/master, so should only be merged in when on the not/master branch.
This commit was sponsored by Ewen McNeill.
* Added annex.resolvemerge configuration, which can be set to false to
disable the usual automatic merge conflict resolution done by git-annex
sync and the assistant.
* sync: Added --no-resolvemerge option.
Note that disabling merge conflict resolution is probably not a good idea
in a direct mode repo or adjusted branch. Since updates to both are done
outside the usual work tree, if it fails the tree is not left in a
conflicted state, and it would be hard to manually resolve the conflict.
Still, made annex.resolvemerge be supported in those cases for consistency.
This commit was sponsored by Riku Voipio.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
The slowdown is not going to be large in typical small-ish repos.
And it does not seem to matter if the assistant reacts a little bit slower
in situations involving the expensive scan, since:
a) Those situations typically involve getting back in sync after something
has changed on a remote, often after a disconnect of some duration.
So taking a few seconds more is not noticable.
b) If the scan finds things that it needs to do, it will start
blocking anyway after 10 transfers are queued (due to use of
queueTransferWhenSmall). So, only the speed of finding the first 10
transfers will be impacted by this change.
This commit was sponsored by Jochen Bartl on Patreon.
Where before the "name" of a key and a backend was a string, this makes
it a concrete data type.
This is groundwork for allowing some varieties of keys to be disabled
in file2key, so git-annex won't use them at all.
Benchmarks ran in my big repo:
old git-annex info:
real 0m3.338s
user 0m3.124s
sys 0m0.244s
new git-annex info:
real 0m3.216s
user 0m3.024s
sys 0m0.220s
new git-annex find:
real 0m7.138s
user 0m6.924s
sys 0m0.252s
old git-annex find:
real 0m7.433s
user 0m7.240s
sys 0m0.232s
Surprising result; I'd have expected it to be slower since it now parses
all the key varieties. But, the parser is very simple and perhaps
sharing KeyVarieties uses less memory or something like that.
This commit was supported by the NSF-funded DataLad project.
Users occasionally report this error firing, and I can't see why,
so include the rejected PairData in the error message.
This is safe even if it contains evil escape characters, because showing
it displays them in escaped form.
This commit was sponsored by Bruno BEAUFILS on Patreon.
import: --deduplicate and --skip-duplicates were implemented inneficiently;
they unncessarily hashed each file twice. They have been improved to only
hash once.
The new approach is to lock down (minimally) and hash files, and then
reuse that information when importing them.
This was rather tricky, especially in detecting changes to files while
they are being imported.
The output of import changed slightly. While before it silently skipped
over files with eg --skip-duplicates, now it shows each file as it starts
to act on it. Since every file is hashed first thing, it would otherwise
not be clear what file import is chewing on. (Actually, it wasn't clear
before when any of the duplicates switches were used.)
This commit was sponsored by Alexander Thompson on Patreon.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
This makes merging a remote into a freshly created direct mode repository
work the same as it works in indirect mode.
The git-annex branches would get merged in any case by a sync,
since that doesn't use git merge.
This might need to be revisited later to better mirror git's behavior.
I've long considered the XMPP support in git-annex a wart.
It's nice to remove it.
(This also removes the NetMessager, which was only used for XMPP, and the
daemonstatus's desynced list (likewise).)
Existing XMPP remotes should be ignored by git-annex.
This commit was sponsored by Brock Spratlen on Patreon.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
The keys database handle needs to be closed after merging, because the
smudge filter, in another process, updates the database. Old cached info
can be read for a while from the open database handle; closing it ensures
that the info written by the smudge filter is available.
This is pretty horribly ad-hoc, and it's especially nasty that the
transferrer closes the database every time.
git 2.8.1 (or perhaps 2.9.0) is going to prevent git merge from merging in
unrelated branches. Since the webapp's pairing etc features often combine
together repositories with unrelated histories, work around this behavior
change by setting GIT_MERGE_ALLOW_UNRELATED_HISTORIES when the assistant
merges.
Note though that this is not done for git annex sync's merges, so
it will follow git's default or configured behavior.
When annex.thin is set, adding an object will add the execute bits to the
work tree file, and this does mean that the annex object file ends up
executable.
This doesn't add any complexity that wasn't already present, because git
annex add of an executable file has always ingested it so that the annex
object ends up executable.
But, since an annex object file can be executable or not, when populating
an unlocked file from one, the executable bit is always added or removed
to match the mode of the pointer file.
So, it will pull and push the original branch, not the adjusted one.
And, for merging, it will use updateAdjustedBranch (not implemented yet).
Note that remaining uses of Git.Branch.current need to be checked too;
for things that should act on the original branch, and not the adjusted
branch.
* Removed the webapp-secure build flag, rolling it into the webapp build
flag.
* Removed the quvi and tahoe build flags, which only adds aeson to
the core dependencies.
* Removed the feed build flag, which only adds feed to the core
dependencies.
Build flags have cost in both code complexity and also make Setup configure
have to work harder to find a usable set of build flags when some
dependencies are missing.
Previously, it only flushed when the queue got larger than 1.
Also, make the queue auto-flush when items are added, rather than needing
to be flushed as a separate step. This simplifies the code and make it more
efficient too, as it avoids needing to read the queue out of the state to
check if it should be flushed.
Linking the file to the tmp dir was not necessary in the clean
filter, and it caused the ctime to change, which caused git to think
the file was changed. This caused git status to get slow as it kept
re-cleaning unchanged files.
Fixes several bugs with updates of pointer files. When eg, running
git annex drop --from localremote
it was updating the pointer file in the local repository, not the remote.
Also, fixes drop ../foo when run in a subdir, and probably lots of other
problems. Test suite drops from ~30 to 11 failures now.
TopFilePath is used to force thinking about what the filepath is relative
to.
The data stored in the sqlite db is still just a plain string, and
TopFilePath is a newtype, so there's no overhead involved in using it in
DataBase.Keys.
In v6 unlocked mode, this fixes a problem that was making eg,
echo > file cause the assistant to copy the file to the annex object,
instead of hard linking it. That because 2 change events were seen
(one for opening the file and one for closing) and processed together
the file was then locked down twice. Which meant it had mutiple hard links,
and so prevented linkAnnex from hard linking it.
There might be scenarios where multiple events come in, but staggered such
that a file gets locked down repeatedly, and it would still be copied to
the annex object in that case.
This can happen when ingesting a new file in either locked or unlocked
mode, when some unlocked files in the repo use the same key, and the
content was not locally available before.
There should be no behavior changes in this commit, it just adds a more
expressive data type and adjusts code that had been passing around a [UUID]
or sometimes a Maybe Remote to instead use [VerifiedCopy].
Although, since some functions were taking two different [UUID] lists,
there's some potential for me to have gotten it horribly wrong.
This removes a bit of complexity, and should make things faster
(avoids tokenizing Params string), and probably involve less garbage
collection.
In a few places, it was useful to use Params to avoid needing a list,
but that is easily avoided.
Problems noticed while doing this conversion:
* Some uses of Params "oneword" which was entirely unnecessary
overhead.
* A few places that built up a list of parameters with ++
and then used Params to split it!
Test suite passes.
Most of the time, there will be no discreprancy between programPath and
readProgramFile.
But, the programFile might have been written by an old version of git-annex
that is still installed, while a newer one is currently running. In this
case, we want to run the same one that's currently running.
This is especially important for things like the GIT_SSH=git-annex used for
ssh connection caching.
The only code that still uses readProgramFile directly is the upgrade code,
which needs to know where the standalone git-annex was installed, in order to
upgrade it.
Note that while the assistant detects changes made to remote names, I left
the commit message fixed rather than calculating it after every commit. It
doesn't seem worth the CPU to do the latter.
* init: Repository tuning parameters can now be passed when initializing a
repository for the first time. For details, see
http://git-annex.branchable.com/tuning/
* merge: Refuse to merge changes from a git-annex branch of a repo
that has been tuned in incompatable ways.
This is necessary for interop between inode caches created on unix and
windows. Which is more important than supporting inodecaches for large keys
with the wrong size, which are broken anyway.
There should be no slowdown from this change, except on Windows.
Avoid using fileSize which maxes out at just 2 gb on Windows.
Instead, use hFileSize, which doesn't have a bounded size.
Fixes support for files > 2 gb on Windows.
Note that the InodeCache code only needs to compare a file size,
so it doesn't matter it the file size wraps. So it has been
left as-is. This was necessary both to avoid invalidating existing inode
caches, and because the code passed FileStatus around and would have become
more expensive if it called getFileSize.
This commit was sponsored by Christian Dietrich.
Reverts 965e106f24
Unfortunately, this caused breakage on Windows, and possibly elsewhere,
because parentDir and takeDirectory do not behave the same when there is a
trailing directory separator.
parentDir is less safe than takeDirectory, especially when working
with relative FilePaths. It's really only useful in loops that
want to terminate at /
This commit was sponsored by Audric SCHILTKNECHT.
The new yesod needs the ViewPatterns extension.
Also, a TH splice in Assistant/Threads/WebApp.hs failed to work without
OverLoadedStrings.
This commit was sponsored by Brock Spratlen.
Found these with:
git grep "^ " $(find -type f -name \*.hs) |grep -v ': where'
Unfortunately there is some inline hamlet that cannot use tabs for
indentation.
Also, Assistant/WebApp/Bootstrap3.hs is a copy of a module and so I'm
leaving it as-is.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
Support users who have set commit.gpgsign, by disabling gpg signatures for
git-annex branch commits and commits made by the assistant.
The thinking here is that a user sets commit.gpgsign intending the commits
that they manually initiate to be gpg signed. But not commits made in the
background, whether by a deamon or implicitly to the git-annex branch.
gpg signing those would be at best a waste of CPU and at worst would fail,
or flood the user with gpg passphrase prompts, or put their signature on
changes they did not directly do.
See Debian bug #753720.
Also makes all commits done by git-annex go through a few central control
points, to make such changes easier in future.
Also disables commit.gpgsign in the test suite.
This commit was sponsored by Antoine Boegli.
Yes, this means that git annex webapp on windows execs git-annex, which
execs itself to set env, and the execs itself again to redirect logs.
This is disgusting. This is Windows(TM).
When in direct mode, update the master branch after committing to the
annex/direct/master branch. Also, update the synced/master branch.
This fixes a topology A->B where both A and B are in direct mode and
running the assistant, and a change is made to B. Before this fix, A pulled
the changes from B, but since they were only on the annex/direct/master
branch, it did not merge them.
Note that I considered making the assistant merge the
remotes/B/annex/direct/master, but decided to keep it simple and only merge
the sync branches as before.
On Windows, changing the time zone causes the apparent mtime of files to
change. This confuses git-annex, which natually thinks this means the files
have actually been modified (since THAT'S WHAT A MTIME IS FOR, BILL <sheesh>).
Work around this stupidity, by using the inode sentinal file to detect if
the timezone has changed, and calculate a TSDelta, which will be applied
when generating InodeCaches.
This should add no overhead at all on unix. Indeed, I sped up a few
things slightly in the refactoring.
Seems to basically work! But it has a big known problem:
If the timezone changes while the assistant (or a long-running command)
runs, it won't notice, since it only checks the inode cache once, and
so will use the old delta for all new inode caches it generates for new
files it's added. Which will result in them seeming changed the next time
it runs.
This commit was sponsored by Vincent Demeester.
This version of wai changed the type of Middleware, so I cannot seem
to liftIO inside it. So, got rid of a lot of not really needed
complexity to use System.Log.Logger's logging stuff, and just use
the standard wai stdout logger when debug logging is enabled.
Format may change some, and it logs http to stdout instead of stderr
now. Doesn't matter for the webapp since both go to the same log anyway.
