Broken by 958312885f, in November!
I missed this because there's no strong type checking across the AJAX call. :(
Need to switch to Fay to avoid such bugs..
Avoid any possibilty of prompting in ssh setup in webapp.
Prticularly on Windows this was a problem, it seemed to enter an infinite
loop. I think that ssh can sometimes use SSH_ASKPASS for y/n prompting,
when no controlling TTY is available, and since git-annex always answers
back with the host's password, not y/n, it looped.
This commit was sponsored by Simon Michael.
When setting up a remote on a ssh server, prompt for a password inside the
webapp, rather than relying on ssh's own password prompting in the terminal
the webapp was started from, or ssh-askpass.
Avoids double prompting for the ssh password (and triple-prompting on
windows for rsync.net), since the entered password is cached for 10 minutes
and this cached password is reused when setting up the repository, after
the initial probe.
When the user has an existing ssh key set up, they can choose to use it,
rather than entering a password. The webapp used to probe for this case
automatically, so this is a little harder, but it's an advanced user thing.
Note that this commit is known to break enabling existing rsync
repositories. It hs not been tested with gcrypt repositories. It's not been
successfully tested yet on Windows.
This commit was sponsored by Ralph Mayer.
This should fix the android build. The EvilSplicer cannot fix up ghc's
misformatting of a case expression with a construstor with a lot of
parameters, which spans multiple lines.
Note that this does not yet use SecureMem. It would probably make sense for
the Password part of a CredPair to use SecureMem, and making that change
is better than passing in a String and having it converted to SecureMem in
this code.
* webapp: Support using git-annex on a remote server, which was installed
from the standalone tarball or OSX app, and so does not have
git-annex in PATH (and may also not have git or rsync in PATH).
* standalone tarball, OSX app: Install a ~/.ssh/git-annex-wrapper, which
can be used to run git-annex, git, rsync, etc.
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
This is a better approach to finding both when NM has lost a network
connection, and when a new network connection is made by NM.
Tested with network-manager 0.9.8.8.
This commit was sponsored by Cedric Staub.
* Remote system might be available, and connection get lost. Should
reconnect, but needs to avoid bad behavior (ie, constant reconnect
attempts.) Use exponential backoff.
* Detect if old system had a too old git-annex-shell, and show the user
a nice message in the webapp. Required parsing error messages, so perhaps
this code shoudl be removed once enough time has passed..
* Switch the protocol to using remote URI's, rather than remote names.
Names change. Also avoids issues with serialization of names containing
whitespace.
This is nearly ready for merge into master now. I'd still like to make the ssh
transport smarter about reusing ssh connection caching during git pull.
This commit was sponsored by Jim Paris.
a ssh remote, and pulls.
XMPP is no longer needed in this configuration!
Requires the remote server have git-annex-shell with notifychanges support.
(untested)
This commit was sponsored by Geog Wechslberger.
This includes checking when dropping files that any required content
configuration is satisfied. However, it does not yet include an active
check on the required content; the location log is trusted when checking
the required content expression.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
git-annex-shell does not need a pty, so this speeds things up.
Also, it may avoid weird misconfigured systems that try to run screen or
tmux on every ssh login from doing so.
This is a new feature, it was not handled before, since it's a bit of an
edge case. However, it can be handled exactly the same as a file/dir
conflict, just leave the non-annexed item alone.
While implementing this, the core resolveMerge' function got a lot simpler
and clearer. Note especially that where before there was an asymetric call to
stagefromdirectmergedir, now graftin is called symmetrically in both cases.
And, in order to add that `graftin us`, the current branch needed to be
known (if there is no current branch, there cannot be a merge conflict).
This led to some cleanups of how autoMergeFrom behaved when there is no
current branch.
This commit was sponsored by Philippe Gauthier.
Trying to start in such a repo will, obviously, fail.
Note that assistant --autostart will try to start in such a repo, and fail,
but does start successfully in the other autostart repos.
This allows eg, putting .git/annex/tmp on a ram disk, if the disk IO
of temp object files is too annoying (and if you don't want to keep
partially transferred objects across reboots).
.git/annex/misctmp must be on the same filesystem as the git work tree,
since files are moved to there in a way that will not work cross-device,
as well as symlinked into there.
I first wanted to put the tmp objects in .git/annex/objects/tmp, but
that would pose transition problems on upgrade when partially transferred
objects existed.
git annex info does not currently show the size of .git/annex/misctemp,
since it should stay small. It would also be ok to make something clean it
out, periodically.
Removed instance, got it all to build using fromRef. (With a few things
that really need to show something using a ref for debugging stubbed out.)
Then added back Read instance, and made Logs.View use it for serialization.
This changes the view log format.
The ctrl-c hack used before didn't actually seem to work.
No haskell libraries expose TerminateProcess. I tried just calling it via
FFI, but got segfaults, probably to do with the wacky process handle not
being managed correctly. Moving it all into one C function worked.
This was hell. The EvilLinker hack was just final icing on the cake.
We all know what the cake was made of.
This is no longer necessary, at least with msysgit 1.8.5.2.msysgit.0.
Its root cause may have been fixed by other recent git path fixes.
It was causing the webapp to fail to make repos on other drives.
On Windows, a file that is not writable cannot be deleted even if in a
directory with write perms. So git object files were not getting deleted
when removing a git repository.
* sync --content: Honor annex-ignore configuration.
* sync: Don't try to sync with xmpp remotes, which are only currently
supported when using the assistant.
Several places assumed this would not happen, and when the AssociatedFile
was Nothing, did nothing.
As part of this, preferred content checks pass the Key around.
Note that checkMatcher is sometimes now called with Just Key and Just File.
It currently constructs a FileMatcher, ignoring the Key. However, if it
constructed a FileKeyMatcher, which contained both, then it might be
possible to speed up parts of Limit, which currently call the somewhat
expensive lookupFileKey to get the Key.
I have not made this optimisation yet, because I am not sure if the key is
always the same. Will need some significant checking to satisfy myself
that's the case..
Make sanity checker run git annex unused daily, and queue up transfers
of unused files to any remotes that will have them. The transfer retrying
code works for us here, so eg when a backup disk remote is plugged in,
any transfers to it are done. Once the unused files reach a remote,
they'll be removed locally as unwanted.
If the setup does not cause unused files to go to a remote, they'll pile
up, and the sanity checker detects this using some heuristics that are
pretty good -- 1000 unused files, or 10% of disk used by unused files,
or more disk wasted by unused files than is left free. Once it detects
this, it pops up an alert in the webapp, with a button to take action.
TODO: Webapp UI to configure this, and also the ability to launch an
immediate cleanup of all unused files.
This commit was sponsored by Simon Michael.
* numcopies: New command, sets global numcopies value that is seen by all
clones of a repository.
* The annex.numcopies git config setting is deprecated. Once the numcopies
command is used to set the global number of copies, any annex.numcopies
git configs will be ignored.
* assistant: Make the prefs page set the global numcopies.
This global numcopies setting is needed to let preferred content
expressions operate on numcopies.
It's also convenient, because typically if you want git-annex to preserve N
copies of files in a repo, you want it to do that no matter which repo it's
running in. Making it global avoids needing to warn the user about gotchas
involving inconsistent annex.numcopies settings.
(See changes to doc/numcopies.mdwn.)
Added a new variety of git-annex branch log file, that holds only 1 value.
Will probably be useful for other stuff later.
This commit was sponsored by Nicolas Pouillard.
Similar to the assistant, this honors any configured preferred content
expressions.
I am not entirely happpy with the implementation. It would be nicer if
the seek function returned a list of actions which included the individual
file gets and copies and drops, rather than the current list of calls to
syncContent. This would allow getting rid of the somewhat reundant display
of "sync file [ok|failed]" after the get/put display.
But, do that, withFilesInGit would need to somehow be able to construct
such a mixed action list. And it would be less efficient than the current
implementation, which is able to reuse several values between eg get and
drop.
Note that currently this does not try to satisfy numcopies when
getting/putting files (numcopies are of course checked when dropping
files!) This makes it like the assistant, and unlike get --auto
and copy --auto, which do duplicate files when numcopies is not yet
satisfied. I don't know if this is the right decision; it only seemed to
make sense to have this parallel the assistant as far as possible to start
with, since I know the assistant works.
This commit was sponsored by Øyvind Andersen Holm.
So that remotes that use a persistent network connection are restarted.
A remote might keep open a long duration network connection, and could
fail to deal well with losing the connection. This is particularly a
concern now that we have external special reotes. An external
special remote that is implemented naively might open the connection only
when PREPARE is sent, and if it loses connection, throw errors on each
request that is made.
(Note that the ssh connection caching should not have this problem; if the
long-duration ssh process loses connection, the named pipe is disconnected
and the next ssh attempt will reconnect. Also, XMPP already deals with
disconnection robustly in its own way.)
There's no way for git-annex to know if a lost network connection actually
affects a given remote, which might have a transfer in process. It does not
make sense to force kill the transferkeys process every time the NetWatcher
detects a change. (Especially because the NetWatcher sometimes polls 1
change per hour.)
In any case, the NetWatcher only detects connection to a network, not
disconnection. So if a transfer is in progress over the network, and the
network goes down, that will need to time out on its own.
An alternate approch that was considered is to use a separate transferkeys
process for each remote, and detect when a request fails, and assume that
means that process is in a failing state and restart it. The problem with
that approach is that if a resource is not available and a remote fails
every time, it degrades to starting a new transferkeys process for every
file transfer, which is too expensive.
Instead, this commit only handles the network reconnection case, and restarts
transferkeys only once the network has reconnected and another transfer needs
to be made. So, a transferkeys process will be reused for 1 hour, or until the
next network connection.
----
The NotificationBroadcaster was rewritten to use TMVars rather than MSampleVars,
to allow checking without blocking if a notification has been received.
----
This commit was sponsored by Tobias Brunner.
This has not been tested at all. It compiles!
The only known missing things are support for encryption, and for get/set
of special remote configuration, and of key state. (The latter needs
separate work to add a new per-key log file to store that state.)
Only thing I don't much like is that initremote needs to be passed both
type=external and externaltype=foo. It would be better to have just
type=foo
Most of this is quite straightforward code, that largely wrote itself given
the types. The only tricky parts were:
* Need to lock the remote when using it to eg make a request, because
in theory git-annex could have multiple threads that each try to use
a remote at the same time. I don't think that git-annex ever does
that currently, but better safe than sorry.
* Rather than starting up every external special remote program when
git-annex starts, they are started only on demand, when first used.
This will avoid slowdown, especially when running fast git-annex query
commands. Once started, they keep running until git-annex stops, currently,
which may not be ideal, but it's hard to know a better time to stop them.
* Bit of a chicken and egg problem with caching the cost of the remote,
because setting annex-cost in the git config needs the remote to already
be set up. Managed to finesse that.
This commit was sponsored by Lukas Anzinger.
Batch detection is heuristic, so can sometimes fail. I observed one such
failure while starting up in a repository with 87000 files. After the first
several batches of ~5000 files, it fell out of batch mode, and never
re-entered it, and so made many more commits of a few files at a time
than necessary.
So, let's always use batch mode when in the startup scan. This avoids the
heuristic there, at least.
There is clearly also room to improve the heuristic. Possibly 10 files is
too high a bar to be found during a commit, on a system that can commit
quickly.
Fixed up a number of things that had worked around there not being a way to
get that.
Most notably, transfer info files on windows now include the process id,
since no locking is currently done. This means the file format varies
between windows and unix.
Windows has a larger (unsigned) PID space, so cannot use the unix CInt
there.
Note that TransferInfo does not yet ever get the TransferPid populated,
as there is missing locking.
transferkeys had used special FDs for communication, but that would be
quite annoying to do in Windows.
Instead, use stdin and stdout. But, to avoid commands like rsync stomping
on them and messing up the communications channel, they're duplicated to a
different handle; stdin is replaced with a null handle, and stdout is
replaced with a copy of stderr. This should all work in windows too.
Stopping in progress transfers may work on windows.. if the types unify
anyway. ;) May need some more porting.
Fixes a test case I received where a corrupted repo was repaired, but the
git-annex branch was not. The root of the problem was that the
MissingObject returned by the repair code was not necessarily a complete
set of all objects that might have been deleted during the repair.
So, stop trying to return that at all, and instead make the index file
checking code explicitly verify that each object the index uses is present.
The assistant's commit code also always avoids git commit, for simplicity.
Indirect mode sync still does a git commit -a to catch unstaged changes.
Note that this means that direct mode sync no longer runs the pre-commit
hook or any other hooks git commit might call. The git annex pre-commit
hook action for direct mode is however explicitly run. (The assistant
already ran git commit with hooks disabled, so no change there.)
This works around horribleness in the Mavericks cpp, which falls over on
the #if when configure is running. Moving it avoids the file being built at
that point.
But it's also a location that makes sense..
The Upgrader avoids checking for upgrades on startup when it was just
upgraded. This avoids an upgrade loop if something goes wrong. One example
of something going wrong would be if the upgrade info file and the
distribution file get out of sync (or the distribution file is cached in
a proxy), so it thinks it has upgraded to a new version, but has really
not.
When an automatic upgrade completes, or when the user clicks on the upgrade
button in one webapp, but also has it open in another browser window/tab,
we have a problem: The current web server is going to stop running in
minutes, but there is no way to send a redirect to the web browser to the
new url.
To solve this, used long polling, so the webapp is always listening for
urls it should redirect to. This allows globally redirecting every open
webapp. Works great! Tested with 2 web browsers with 2 tabs each.
May be useful for other purposes later too, dunno.
The overhead is 2 http requests per page load in the webapp. Due to yesod's
speed, this does not seem to noticibly delay it. Only 1 of the requests
could possibly block the page load, the other is async.
Made alerts be able to have multiple buttons, so the alerts about upgrading
can have a button that enables automatic upgrades.
Implemented automatic upgrading when the program file has changed.
Note that when an automatic upgrade happens, the webapp displays an alert
about it for a few minutes, and then closes. This still needs work.
Not yet wired up to restart the assistant on upgrade; that needs careful
sanity checking to wait until the upgrade is done before restarting.
Used the DirWatcher here, so it gets events for any changes to the
directory containing the program file. (But not subdirs.) This is necessary
in order to detect when the file is renamed as part of the upgrade, which
an inotify on a single file would not detect. (Also, I have DirWatcher code,
but not FileWatcher code.)
Note that upgrades that remove or rename a whole directory tree containing
the executable will *not* trigger this code. So eg, deleting and replacing
the whole standalone tarball dir tree won't work -- but untarring it
over top will. So should dpkg package upgrades.
Added programPath, using a new GHC feature to find the full path to the
executable. The fallback code for old GHC or unsupported OS is less good;
its worst failure mode would be either failing to find the program, and so
not checking for upgrades, or finding a git-annex that's in PATH, but is
not the one running.
This commit was sponsored by John Roepke.
The webapp will check twice a day, when the network is connected, to see if
it can download a distributon upgrade file. If a newer version is found,
display an upgrade alert.
This will need the autobuilders to set UPGRADE_LOCATION to the url
it can be downloaded from when building git-annex. Only builds with that
set need automatic upgrade alerts.
Currently, the upgrade page just requests the user manually download
and upgrade it. But, all the info is provided to do automated upgrades
in the future.
Note that urls used will need to all be https.
This commit was sponsored by Dirk Kraft.
Complicated by such repositories potentially being repos that should have
an annex.uuid, but it failed to be gotten, perhaps due to the past ssh repo
setup bugs. This is handled now by an Upgrade Repository button.
I was able to reproduce something very like this bug by starting
pairing separately on both computers under poor network conditions (ie,
weak wifi on my front porch). Neither computer showed an alert for the
PairReq messages it was seeing (intermittently) from the other.
So, I've made a new PairReq message that has not been seen before
always make the alert pop up, even if the assistant thinks it is
in the middle of its own pairing process (or even another pairing
process with a different box on the LAN).
(This shouldn't cause a rogue PairAck to disrupt a pairing process part
way through.)
The msg contains a haskell-escaped string, so control characters in it can
also be escaped. So this didn't work before, really.
Got rid of the \n check, because current pairing messages actually do
contain a \n, after the ssh public key. Don't want to break
back-compatability.
When starting up the assistant, it'll remind about the current
repository, if it doesn't have checks. And when a removable drive
is plugged in, it will remind if a repository on it lacks checks.
Since that might be annoying, the reminders can be turned off.
This commit was sponsored by Nedialko Andreev.
Added a RemoteChecker thread, that waits for problems to be reported with
remotes, and checks if their git repository is in need of repair.
Currently, only failures to sync with the remote cause a problem to be
reported. This seems enough, but we'll see.
Plugging in a removable drive with a repository on it that is corrupted
does automatically repair the repository, as long as the corruption causes
git push or git pull to fail. Some types of corruption do not, eg
missing/corrupt objects for blobs that git push doesn't need to look at.
So, this is not really a replacement for scheduled git repository fscking.
But it does make the assistant more robust.
This commit is sponsored by Fernando Jimenez.
