This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
Split exportRemotes out from syncDataRemotes; the parts of the assistant
that upload keys and drop keys from remotes don't apply to exports,
because those operations are not supported.
Some parts of the assistant and webapp do operate on both
syncDataRemotes and exportRemotes. Particularly when downloading from
either of them. Added a downloadRemotes that combines both.
With this, the assistant should download from exports, but it won't yet
upload changes to them.
This commit was sponsored by Fernando Jimenez on Patreon.
The slowdown is not going to be large in typical small-ish repos.
And it does not seem to matter if the assistant reacts a little bit slower
in situations involving the expensive scan, since:
a) Those situations typically involve getting back in sync after something
has changed on a remote, often after a disconnect of some duration.
So taking a few seconds more is not noticable.
b) If the scan finds things that it needs to do, it will start
blocking anyway after 10 transfers are queued (due to use of
queueTransferWhenSmall). So, only the speed of finding the first 10
transfers will be impacted by this change.
This commit was sponsored by Jochen Bartl on Patreon.
I've long considered the XMPP support in git-annex a wart.
It's nice to remove it.
(This also removes the NetMessager, which was only used for XMPP, and the
daemonstatus's desynced list (likewise).)
Existing XMPP remotes should be ignored by git-annex.
This commit was sponsored by Brock Spratlen on Patreon.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
There should be no behavior changes in this commit, it just adds a more
expressive data type and adjusts code that had been passing around a [UUID]
or sometimes a Maybe Remote to instead use [VerifiedCopy].
Although, since some functions were taking two different [UUID] lists,
there's some potential for me to have gotten it horribly wrong.
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
Several places assumed this would not happen, and when the AssociatedFile
was Nothing, did nothing.
As part of this, preferred content checks pass the Key around.
Note that checkMatcher is sometimes now called with Just Key and Just File.
It currently constructs a FileMatcher, ignoring the Key. However, if it
constructed a FileKeyMatcher, which contained both, then it might be
possible to speed up parts of Limit, which currently call the somewhat
expensive lookupFileKey to get the Key.
I have not made this optimisation yet, because I am not sure if the key is
always the same. Will need some significant checking to satisfy myself
that's the case..
Similar to the assistant, this honors any configured preferred content
expressions.
I am not entirely happpy with the implementation. It would be nicer if
the seek function returned a list of actions which included the individual
file gets and copies and drops, rather than the current list of calls to
syncContent. This would allow getting rid of the somewhat reundant display
of "sync file [ok|failed]" after the get/put display.
But, do that, withFilesInGit would need to somehow be able to construct
such a mixed action list. And it would be less efficient than the current
implementation, which is able to reuse several values between eg get and
drop.
Note that currently this does not try to satisfy numcopies when
getting/putting files (numcopies are of course checked when dropping
files!) This makes it like the assistant, and unlike get --auto
and copy --auto, which do duplicate files when numcopies is not yet
satisfied. I don't know if this is the right decision; it only seemed to
make sense to have this parallel the assistant as far as possible to start
with, since I know the assistant works.
This commit was sponsored by Øyvind Andersen Holm.
This is motivated by a user report that the assistant was repeatedly
retrying transfers of files that had been deleted (in direct mode, so
removing the only copy).
Note that the glacier code retries failed transfers after a while to retry
downloads that have aged long enough to be available. This is ok; if we're
doing a full transfer scan we'll retry on every file that is still in the
git tree.
Also note that this makes the assistant less likely to get every file
referenced by old revs of the git tree. Not something the assistant tries
to ensure anyway, so I feel this is acceptable.
This is a compromise. I would like to nice every thread except for the
webapp thread, but it's not practical to do so. That would need every
thread to run as a bound thread, which could add significant overhead.
And any forkIO would escape the nice level.
Like the old one, but does not mention which remotes are scanned.
I think this is less confusing, as it does not imply the remotes
were somehow accessed (which they are not; inaccessible remotes
can be scanned.)
* get/copy --auto: Transfer data even if it would exceed numcopies,
when preferred content settings want it.
* drop --auto: Fix dropping content when there are no preferred content
settings.
Converted several threads to run in the monad.
Added a lot of useful combinators for working with the monad.
Now the monad includes the name of the thread.
Some debugging messages are disabled pending converting other threads.
This was complicated quite a bit by needing to check numcopies. I optimised
that, so it only looks up numcopies once per file, no matter how many
remotes it checks to drop from. Although it did just occur to me that
it might be better to first check if it wants to drop content, and only
then check numcopies..
This avoids the expensive transfer scan relying on its list of remotes
to scan being accurate throughout, which it will not be when the user
pauses syncing to a remote.
I feel it's ok to queue transfers to *any* known remote, not just the ones
being scanned.
Note that there are still small races where after syncing to a remote is
paused, a transfer can be queued for it. Not just in the expensive transfer
scan, but in the cheap failed transfer scan, and elsewhere.
Both when queueing downloads, and uploads, consults the preferred content
settings.
I didn't make it check yet when requeing failed transfers or queuing
deferred downloads; dealing with the preferred content settings (or indeed,
other settings) changing while the assistant is running still needs work.
