In cases where numcopies checks prevented the resumed move from dropping
the object from the source repository, it now relies on a log of recent
moves to replicate the behavior of the interrupted command.
Performance: Probably noticable impact, since it has to add to the log,
check the log, and remove from the log. Seems worth it to avoid this
annoying edge case. The log functions are pretty well optimised to avoid
unncessary work.
An performance improvement to make later would be to avoid cleanup doing
anything if it's not written to the log file, and has confirmed that the
log file does not contain the log line.
This commit was sponsored by Jake Vosloo on Patreon.
When I put in Haskell98 this spring, I was under the mistaken
apprehension that ghc defaulted to that. But it actually its default
is a third mode, which is closer to Haskell2010 but with some differences.
The manual says "By default, GHC mainly aims to behave (mostly) like a
Haskell 2010 compiler"
Fixed two cases where the Haskell98 do indentation flexability let
wrongly indented code build. That is one of the places where
ghc does not behave like Haskell2010 by default.
The other place that I think I was concerned about, is GHC manual
section 19.1.1.3. Expressions and patterns. But that only seems to
affect code using bottoms, so would only affect pure functions throwing
an error, which I don't think git-annex does in many places as it's
pretty horrid style. And it would only affect rare cases like shown in
that section. If it did happen, it would mean that the error was not
thrown before specifying Haskell98, and then was. Haskell2010 behaves
the same as Haskell98.
This commit was sponsored by Denis Dzyubenko on Patreon.
It seemed best to do this, for consistency with every other way files can
get into a git-annex repo. Although it's just a bit strange that a local
.gitignore file affects the pseudo-commits made for the remote that's
imported from.
This commit was sponsored by Brett Eisenberg on Patreon.
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
Ensure that checkCanAdd is used everywhere a file is added to git,
so git add is run with -f, presumably avoiding the work it would usually
do to check ignores.
sync: When run without --content, import without copying from
importtree=yes directory special remotes. (Other special remotes may
support this later as well.)
This commit was sponsored by Svenne Krap on Patreon.
This avoids import with --no-content and with --content potentially
generating two different trees, leading to a merge conflict when run in
two different clones of a repo. And it's necessary groundwork to make
git-annex sync --no-content import from special remotes that support
importKey.
Only the directory special remote currently supports importKey, and it
generates the same key as git-annex usually does, so there is no
behavior change for it.
Future special remotes will need to take care when adding importKey,
if it generates different keys. Added some warnings about that to
comments.
This commit was sponsored by Noam Kremen on Patreon.
The latter is for git-annex matchexpression and matching against it can
throw an exception. Splitting out the former reduces the potential for
mistakes and avoids needing to worry about matching against that
throwing an exception.
This is more groundwork for matching largefiles while importing,
without downloading content.
This commit was sponsored by Graham Spencer on Patreon.
Anything that needs to examine the file content will fail to match,
or fall back to other available information. But the intent is that the
matcher be checked for matchNeedsFileContent and only be used if it does
not, so the exact behavior doesn't much matter as it should never
happen.
The real point of this is to not need to provide a dummy content file
when matching.
This commit was sponsored by Martin D on Patreon.
This was the last one marked as a zombie. There might be others I don't
know about, but except for in the hypothetical case of a thread dying
due to an async exception before it can wait on a process it started, I
don't know of any.
It would probably be safe to remove the reapZombies now, but let's wait
and so that in its own commit in case it turns out to cause problems.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Eliminate a zombie that was only cleaned up by the later zombie cleanup
code.
This is still not ideal, it would be cleaner if it used conduit or
something, and if the thread gets killed before waiting, it won't stop
the process.
Only remaining zombies are in CmdLine.Seek
Sped up seeking to around twice as fast, by avoiding a pass over the
worktree files when preferred content expressions of the local repo and
remotes don't use include=/exclude=.
Thanks to Lukey for identifying the optimisation.
This commit was sponsored by Brock Spratlen on Patreon.
Otherwise the bloom filter may not be fully populated when the second
pass starts, which could have led to incorrect behavior with --all -J,
probably in very rare circumstances.
matchNeedsFileContent is not used yet, but shows how to add information
about terminals. That one would be needed for
https://git-annex.branchable.com/todo/sync_fast_import/
Note the tricky bit in Annex.FileMatcher.call where it folds over the
included matcher to propagate the information.
This commit was sponsored by Svenne Krap on Patreon.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
The use case of this field is mostly to support -J combined with --json.
When that is implemented, a user will be able to look at the field to
determine which of the requests they have sent it corresponds to.
The field typically has a single value in its list, but in some cases
mutliple values (eg 2 command-line params) are combined together and the
list will have more.
Note that json parsing was already non-strict, so old git-annex metadata
--json --batch can be fed json produced by the new git-annex and will
not stumble over the new field.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
Make all calls to git merge go through autoMergeFrom, in preparation
for fine-tuning git merge's config for automatic merge conflict
resolution.
This commit was sponsored by Ryan Newton on Patreon.
Fixes reversion in 8.20200617 that made annex.pidlock being enabled result
in some commands stalling, particularly those needing to autoinit.
Renamed runsGitAnnexChildProcess to make clearer where it should be
used.
Arguably, it would be better to have a way to make any process git-annex
runs have the env var set. But then it would need to take the pid lock
when running any and all processes, and that would be a problem when
git-annex runs two processes concurrently. So, I'm left doing it ad-hoc
in places where git-annex really does run a child process, directly
or indirectly via a particular git command.
addurl: Fix reversion in 7.20190322 that made --file not be honored when
youtube-dl was used to download media.
8758f9c561 was on the right track, but missed that | otherwise prevented
the code it added from being used.
Also, refactored out a common function.
This commit was sponsored by Graham Spencer on Patreon.
Part of workTreeItems is trying detect a case
where git porcelain refuses to process a file, and where
git ls-files silently outputs nothing. But, it's hard to perfectly
replicate git's behavior, and besides, git's behavior could change.
So it could be that we warn, but then git ls-files does not skip over
it, and so git-annex also processes it after warning about it.
So, if we think we have a problem with a parameter, display the warning,
and skip processing it at all.
Implementing this was complicated by needing to handle the case where
all command-line parameters get filtered out this way. Which is
different than the case where there are none, because we don't want to
operate on all files in this new case..
sanitizeFilePath was changed to sanitize leading '.', but ImportFeed was
running it on parts of the template. So eg the leading '.' in the extension
got sanitized.
Note the added case for sanitizeLeadingFilePathCharacter ('/':_)
-- this was added because, if the template is title/episode and the title
is not set, it would expand to "/episode". So this is another potential
security fix.
This was already prevented in other ways, but as seen in commit
c30fd24d91, those were a bit fragile.
And I'm not sure races were avoided in every case before. At least a
race between two separate git-annex processes, dropping the same
content, seemed possible.
This way, if locking fails, and the content is not present, it will
always do the right thing. Also, it avoids the overhead of an unncessary
inAnnex check for every file.
This commit was sponsored by Denis Dzyubenko on Patreon.
The test suite noticed this case, where two files with the same key are
dropped, and the seek stage sees both have content due to the way files
stream through it. But then locking the content to drop fails on the
second file, because the first file has already been dropped.
So, add back otherwise redundant inAnnex check.
Sped up seeking files to drop by 2x, and also some performance
improvements to checking numcopies.
Interestingly, the seek speedup is not due to precaching, but I think is
due to calling getParsed earlier.
Annex.Drop had to be changed to check inAnnex there, since it was removed
from Command.Drop. All other users of Command.Drop already checked inAnnex
themselves.
This commit was sponsored by Ryan Newton on Patreon.
This is groundwork for external backends, but also makes sense to keep
this information with the rest of a Backend's implementation.
Also, removed isVerifiable. I noticed that the same information is
encoded by whether a Backend implements verifyKeyContent or not.
This removes all calls to inAnnex, except for some involving --batch.
It may be that the batch code could get a similar speedup, but I don't
know if people habitually pass a huge number of files through --batch
that git-annex does not need to do anything to process, so I skipped it
for now.
A few calls to ifAnnexed remain, and might be worth doing more to
convert. In particular, Command.Sync has one that would probably speed
it up by a good amount.
(also removed some dead code from Command.Lock)
This is only implemented for git-annex get so far. It makes git-annex
get nearly twice as fast in a repo with 10k files, all of them present!
But, see the TODO for some caveats.
The cache was removed way back in 2012,
commit 3417c55189
Then I forgot I had removed it! I remember clearly multiple times when I
thought, "this reads the same data twice, but the cache will avoid that
being very expensive".
The reason it was removed was it messed up the assistant noticing when
other processes made changes. That same kind of problem has recently
been addressed when adding the optimisation to avoid reading the journal
unnecessarily.
Indeed, enableInteractiveJournalAccess is run in just the
right places, so can just piggyback on it to know when it's not safe
to use the cache.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
Clean build under ghc 8.8.3, which seems to do better at finding cases
where two imports both provide the same symbol, and warns about one of
them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Fix a deadlock that could occur after git-annex got an unlocked file,
causing the command to hang indefinitely.
Known to happen on vfat filesystems, possibly others.
Note that a deadlock is still theoretically possible, if anything
smudge --clean does causes it to run the git queue for some other
reason.
Apparently that doesn't happen, but will need to keep an eye on it.
checkpresentkey: When no remote is specified, try all remotes, not only
ones that the location log says contain the key. This is what the
documentation has always said it did.
Still try the logged remotes first, because they are far more likely to
have the key.
This handles all createProcessSuccess callers, and aside from process
pools, the complete conversion of all process running to async exception
safety should be complete now.
Also, was able to remove from Utility.Process the old API that I now
know was not a good idea. And proof it was bad: The code size went *down*,
despite there being a fair bit of boilerplate for some future API to
reduce.
Not yet 100% done, so far I've grepped for waitForProcess and converted
everything that uses that to start the process with withCreateProcess.
Except for some things like P2P.IO and Assistant.TransferrerPool,
and Utility.CoProcess, that manage a pool of processes. See #2
in https://git-annex.branchable.com/todo/more_extensive_retries_to_mask_transient_failures/#comment-209f8a8c38e63fb3a704e1282cb269c7
for how those will need to be dealt with.
checkSuccessProcess, ignoreFailureProcess, and forceSuccessProcess calls waitForProcess, so
callers of them will also need to be dealt with, and have not been yet.
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
Fix a crash or potentially not all files being exported when sync -J
--content is used with an export remote.
Crash as described in fixed bug report.
waitForAllRunningCommandActions inserted in several points where all the
commandActions started before need to have finished before moving on to
the next stage of the export. A race across those points could have
maybe resulted in not all files being exported, or a wrong tree being
export.
For example, changeExport starting up an action like
a rename of A to B. Then, with that action still running, fillExport
uploading a new A, *before* the rename occurred. That race seems
unlikely to have happened. There are some other ones that this also
fixes.
move --to, copy --to, mirror --to: When concurrency is enabled, run cleanup
actions in separate job pool from uploads.
transferStages was confusingly named, it's only useful when doing downloads
as then the verify actions can be run concurrently with other downloads.
For commands that upload, there will be more concurrency from running
cleanup actions in a separate job pool.
As for sync, I left it using downloadStages although that's not optimal
for the part of a sync that uploads. Perhaps it should use the union of
both?
Already supported --json, but not that.
Also checked all other commands that only support --json, and the only
other one that does transfers is fsck (--from), which it did not seem worth
adding --json-progress to really.
One way this can be used is to remove all urls for some website that went
away:
git-annex whereis --format '${file} ${url}\0' | \
grep -z whatever.com | git-annex rmurl --batch -z
Combining ${url} and ${uuid} is a bit of a combinatorial explosion.
It didn't seem worth only outputting a uuid alongside an url belonging
to it, so each uuid is output beside each url.
Finishes the transition to make remote methods throw exceptions, rather
than silently hide them.
A bit on the fence about this one, because when renameExport fails,
it falls back to deleting instead, and so does the user care why it failed?
However, it did let me clean up several places in the code.
This commit was sponsored by Ethan Aubin.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Graham Spencer on Patreon.
retrieveExport is part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
getKey very rarely fails, and when it does it's always for the same reason
(user configured annex.backend to url for some reason). So, this will
avoid dealing with Nothing everywhere it's used.
This commit was sponsored by Ilya Shlyakhter on Patreon.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
Finishing work begun in 6952060665
Also, truncate filenames provided by other remotes if they're too long,
when --preserve-filename is not used. That seems to have been omitted
before by accident.
I run haddock with `cabal haddock --executables`. It fails with:
Types/Remote.hs:271:17: error: parse error on input ‘->’
Apparently haddock does not like to find haddock blocks outside of
declarations? In any case, this patch makes these type of errors go
away.
Afterwards, I see errors like these, that need to be investigated as
a next step:
haddock: internal error: internal: extractDecl
CallStack (from HasCallStack):
error, called at utils/haddock/haddock-api/src/Haddock/Interface/Create.hs:1116:12 in main:Haddock.Interface.Create
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
Now the warning gets displayed, which is better than an arcane git error.
The warning is still kind of ugly, especially when the pull later in the
sync will clear up what it warns about. But, this is an unusual situation
not likely to happen, and if there is no remote to pull from, the warning
message is needed or the sync will seem to succeed despite not merging the
synced master branch.
Would still be better if it could merge the synced master branch in this
situation, making an empty commit to master to do it seems wrong, and
otherwise it would need a whole separate code path, and would bypass using
git merge in favor of say, setting master to the syned branch. Which would
bypass git configs like arguably merge.ff and certianly
merge.verifySignatures. So don't want to do that.
Todo item is done at last.
Might later want to think about testing some other types of remotes that
can be tested locally. The git remote itself is probably already well
enough tested by the test suite that testremote is not needed. Could
test things like bup, or rsync to a local directory. Or even external,
although that would require embedding an external special remote program
into the test suite..
Factored out a mkTestTree, which can be used to get a TestTree,
w/o needing to first run any annex actions, which the main test suite
cannot do because it does not operate in an annex repo to start with,
and it needs to start testing before a repo is available.
aeca7c2207 exposed this problem, but it
was never a good idea to have a series of test cases, some of which depend on
prior ones, and throw away annex state after each.
addurl: When run with --fast on an url that
annex.security.allowed-ip-addresses prevents accessing, display a more
useful message.
(Also importfeed --fast potentially.)
Do not sync with a faster remote that was not specified.
That old behavior was only documented in the changelog, and was certianly
surprising. It also meant adding --fast made it slower..
get --from, move --from: When used with a local git remote, these used to
silently skip files that the location log thought were present on the
remote, when the remote actually no longer contained them. Since that
behavior could be surprising, now instead display a warning.
I got very confused when I encountered this behavior, since it was silently
skipping a file I needed that whereis said was on the remote.
get without --from already displayed a "unable to access these remotes"
message, which while a bit misleading in that the remote is likely
accessible, but just doesn't contain the file, at least indicated something
went wrong.
Having get --from display a warning makes it in line with get
w/o --from, so seems certianly ok. It might be there are situations where
move --from is used, on eg a whole directory, and the user only wants to
move whatever is present in the remote, and is perfectly ok with files
that are not present being skipped. So I'm less sure about the new warning
being ok there. OTOH, only local git remotes avoiding displaying a warning
in that case too, so this just brings them into line with other remotes.
(Also note that this makes it a little bit faster when dealing with a lot of
files, since it avoids a redundant stat of the file.)
Avoid repeatedly opening keys db when accessing a local git remote and -J
is used.
What was happening was that Remote.Git.onLocal created a new annex state
as each thread started up. The way the MVar was used did not prevent that.
And that, in turn, led to repeated opening of the keys db, as well as
probably other extra work or resource use.
Also managed to get rid of Annex.remoteannexstate, and it turned out there
was an unncessary Maybe in the keysdbhandle, since the handle starts out
closed.
A couple of these were probably actual bugs in edge cases. Most of the
changes I'm fine with. The fact that aeson's object returns sometihng
that we know will be an Object, but the type checker does not know is
kind of annoying.
Eg"core.bare" is the same as "core.bare = true".
Note that git treats "core.bare =" the same as "core.bare = false", so the
code had to become more complicated in order to treat the absense of a
value differently than an empty value. Ugh.
Git has an obnoxious special case in git config, a line "foo" is the same
as "foo = true". That means there is no way to examine the output of
git config and tell if it was run with --null or not, since a "foo"
in the first line could be such a boolean, or could be followed by its
value on the next line if --null were used.
So, rather than trying to do such a detection, track the style of config
at all the points where it's generated.
The only price paid is one additional MVar read per write to the journal.
Presumably writing a journal file dominiates over a MVar read time by
several orders of magnitude.
--batch does not get the speedup because then it needs to notice when
another process has made a change. Also made the assistant and other damon
modes bypass the optimisation, which would not help them anyway.
Improve git-annex's ability to find the path to its program, especially
when it needs to run itself in another repo to upgrade it.
Some parts of the code used readProgramFile, probably because I forgot that
programPath exists.
I noticed this when a git-annex auto-upgrade failed because it was running
git-annex upgrade --autoonly, but the code to run git-annex used
readProgramFile, which happened to point to an older build of git-annex.
This was originally added so that unannex could prevent the hook from
running while files were in a state that the hook would interpret as
old-style unlocked and so would lock.
Now that's gone, so the only thing the hook was preventing was two
pre-commit processes running simulantaneously. But such concurrency
is normal in git-annex and should not be a problem.
Does mean that .git/hooks/pre-commit-annex might run more concurrently,
that seems the only risk of it causing any problems.
Running `git annex add --force-small` on a modified submodule fails
when the submodule path is fed to hash-object. This failure is
unlikely to be triggered by a caller passing a submodule explicitly to
`git annex add` because there's nothing useful that annex-add can do
with a submodule. A more likely scenario for hitting this failure is
that the caller passes "." or a subdirectory to `annex-add` while a
submodule underneath the specified path happens to be modified.
addSmallOverridden already routes symbolic links through addFile
rather than using the custom hash-object/update-index call. The
latter is valid only for regular files, so extend this condition so
that everything that isn't a regular file goes through addFile. Doing
so avoids the above error because submodules come in as directories.
addSmallOverridden calls getFileStatus and then checks the result with
isSymbolicLink. getFileStatus dereferences symbolic links, so
isSymbolicLink will always return false (assuming the getFileStatus
call doesn't fail on a broken link). Use getSymbolicLinkStatus
instead.
Upgrade other repos than the current one by running git-annex upgrade
inside them, which avoids problems with upgrade code making assumptions
that the cwd will be inside the repo being upgraded.
In particular, this fixes a problem where upgrading a v7 repo to v8 caused
an ugly git error message.
I actually could not find a way to make Upgrade.V7 work properly
without changing directory to the remote. Once I got git ls-files to work,
the git cat-file failed because :path can only be used in the current git
repo.
Remaining things needing converted are in the assistant, and Annex.Ssh.
Every other remaining call to createDirectoryIfMissing True has been
audited and is not relevant. The ones in Build/ of course don't get
included in the program. Others included eg, Remote.Tahoe and
Config.Files which both write to dotfiles under the home directory.
Since it was used on both worktree and .git/annex files, split into
multiple functions.
In passing, this also improves permissions of created directories in
.git/annex, using createAnnexDirectory on those.
git-annex config: Only allow configs be set that are ones git-annex
actually supports reading from repo-global config, to avoid confused users
trying to set other configs with this.
The 'fail' method has been moved to the 'MonadFail' class. I made the changes
so that the code still compiles with previous versions of 'base' that don't
have the new MonadFail class exported by Prelude yet.
* whereis: If a remote fails to report on urls where a key
is located, display a warning, rather than giving up and not displaying
any information.
* When external special remotes fail but neglect to provide an error
message, say what request failed, which is better than displaying an
empty error message to the user.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
remoteAnnexConfig will avoid bugs like
a3a674d15b
Use now more generic remoteConfig in a couple places that built
non-annex config settings manually before.
That was added back in 2013 commit 2af652e1b8
and I'm a bit unclear about the reasons.
It seemed that, at the time, receive.denyNonFastforwards=true, which is
the default in a repo created by git init --shared --bare (but not
without --shared), which the assistant did, caused problems syncing.
But even at the time the bug report showed an error message clearly
explaining that it was a non-fast-forward push being denied.
I tried it with the current version, and since git-annex sync pulls
from the bare repo and merges, it pushes a fast-forward. So there's no
failure to push. (There could be one if another push happened after the
pull, but you'd want it to fail then presumably.)
I'm not 100% sure what changed to make it not be a problem, but I know
I've seen this message in many circumstances and I can't ever recall it
having anything to do with any issue that prevented a push.
Based on doc/forum/non_fast_forward_error_with_git_annex_sync.mdwn,
which showed the problem when syncing from a direct mode repo,
and on doc/forum/receiving_indirect_renames_on_direct_repo___63__/comment_3_0246fff6c7c75f6be45bd257ec3872a5._comment
which seems to show the problem was actually a problem pulling,
I think there's a good chance that the problem actually involved direct
mode.
* Added sync --only-annex, which syncs the git-annex branch and annexed
content but leaves managing the other git branches up to you.
* Added annex.synconlyannex git config setting, which can also be set with
git-annex config to configure sync in all clones of the repo.
Use case is then the user has their own git workflow, and wants to use
git-annex without disrupting that, so they sync --only-annex to get the
git-annex stuff in sync in addition to their usual git workflow.
When annex.synconlyannex is set, --not-only-annex can be used to override
it.
It's not entirely clear what --only-annex --commit or --only-annex
--push should do, and I left that combination not documented because I
don't know if I might want to change the current behavior, which is that
such options do not override the --only-annex. My gut feeling is that
there is no good reasons to use such combinations; if you want to use
your own git workflow, you'll be doing your own committing and pulling
and pushing.
A subtle question is, how should import/export special remotes be handled?
Importing updates their remote tracking branch and merges it into master.
If --only-annex prevented that git branch stuff, then it would prevent
exporting to the special remote, in the case where it has changes that
were not imported yet, because there would be a unresolved conflict.
I decided that it's best to treat the fact that there's a remote tracking
branch for import/export as an implementation detail in this case. The more
important thing is that an import/export special remote is entirely annexed
content, and so it makes a lot of sense that --only-annex will still sync
with it.
Fix support for repositories tuned with annex.tune.branchhash1=true,
including --all not working and git-annex log not displaying anything for
annexed files.
fsck --from remote: Fix a concurrency bug that could make it incorrectly
detect that content in the remote is corrupt, and remove it, resulting in
data loss.
using git credential to get the password
One thing this doesn't do is wrap the password prompting inside the prompt
action. So with -J, the output can be a bit garbled.
The use case is basically the user having forgotten, so --help would be
best, but it would be quite hard to include this in --help, since it may
even have to spin up an external special remote program.
I also considered --umm but typoed it the first time I tried it as
--uum, and while memorable, it's too cutesy. --whatelse is good because
it explicitly asks, what other params, besides the ones I've given?
preferreddir can be used with any special remote, so its parser needs to
be included in the commonFieldParsers.
initremote with uuid= changed to delete that field, so it does not
need to be included in commonFieldParsers. Note that, existing remotes
initialized before this change will have the field in remote.log.
This will not cause problems parsing, because the value will be
Accepted.
Grepping for 'Accepted "' found these, and I'm pretty sure this is all of
them.
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
This avoids hardcoding the sha size, so when git uses sha256, it will
output the full sha256 and not a truncation to 40 characters.
I reviewed git's history, and while there have been some
bugs with commands not supporting --no-abbrev (eg git diff --no-index
--no-abbrev was broken in git 2.1), none of the commands git-annex
uses will be impacted by those old bugs.
Git will eventually switch to sha2 and there will not be one single
shaSize anymore, but two (40 and 64).
Changed all parsers for git plumbing output to support both sizes of
shas.
One potential problem this does not deal with is, if somewhere in
git-annex it reads two shas from different sources, and compares them
to see if they're the same sha, it would fail if they're sha1 and sha256
of the same value. I don't know if that will really be a concern.
ifAnnexed in a bare repo passes to git cat-file :./filename , which it
refuses to do since the repo is bare.
Note that, reinject somefile someannexedfile in a bare repo silently does
nothing, because someannexedfile is never actually an annexed worktree
file, because the repo is bare.
options make it easier to override annex.largefiles configuration
(and potentially safer as it avoids bugs like the smudge bug fixed
in the last release)
Deleted some old comments that were posted to the man page discussing such
options.
Updated docs that used -c annex.largefiles to use the options.
Note that addSmallOverridden was needed to avoid the clean filter running
on the file. It would be possible to make addFile also update the index
directly, rather than going via git add. However, it was not necessary,
and I want to avoid breaking on some edge case, particularly if the code in
addSmallOverridden has some oversight.
Also, when annex.addunlocked is set and annex.largefiles does not match a file,
git annex add --force-large works, but git status will then show the file
as added, with a unstaged modification. The unstaged modification adds the
file to git. This is identical behavior to using -c annex.largefiles=nothing
when annex.addunlocked is set. This does not prevent committing what was
intended to be added. I have not gotten to the bottom of why git thinks
the file is modified and runs it through the clean filter in this case.
smudge: When annex.largefiles=anything, files that were already stored in
git, and have not been modified could sometimes be converted to being
stored in the annex. Changes in 7.20191024 made this more of a problem.
This case is now detected and prevented.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
e53070c1f quietly made it set the local git config too, but that was never
documented anywhere, and it had surprising results. If I set
annex.largefiles globally in a repo, I would expect to be able to change it
in another repo, and the original repo would get the change and use it,
rather than being stuck on the old value set there.
And, if I have a local annex.largefiles and set a different global default,
I'd be surprised to have my local setting overwritten.
annex.securehashesonly does need to be set locally, since it's a security
feature and the global is only a default until it gets set locally. So
special cased.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Only done on those calls to getFileStatus that had a RawFilePath, not a
FilePath. The others would probably be just as fast if converted to use
it with toRawFilePath, but I'm not 100% sure.
Note that genInodeCache' uses fromRawFilePath, but that value only gets
used on Windows, so on unix the thunk will never be evaluated.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
* benchmark: Changed --databases to take a parameter specifiying the size
of the database to benchmark.
* benchmark --databases: Display size of the populated database.
* benchmark --databases: Improve the "addAssociatedFile to (new)"
benchmark to really add new values, not overwriting old values.
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
Added annex.gitaddtoannex configuration. Setting it to false prevents
git add from usually adding files to the annex.
(Unless the file was annexed before, or a renamed annexed file is detected.)
Currently left at true; some users are encouraging it be set to false.
Renamed unlocked files are now detected, and will always be
annexed, unless annex.largefiles disallows it.
This allows for git add's behavior to later be changed to otherwise
not annex files (whether by default or as a config option), without
worrying about the rename case.
This is not a major behavior change; annexing is still the default. But
there is one case where the behavior is changed, I think for the better:
touch f
git -c annex.largefiles=nothing add f
git add bigfile
git commit -m ...
mv bigfile f
git add f
Before, git-annex would see that f was previously not annexed,
and so the renamed bigfile content gets added to git. Now, it notices
that the inode is the one that bigfile used, and so it annexes it.
This potentially slows down git add a lot in some repositories because
of the poor performance of isInodeKnown when there are a lot of unlocked
files. Configuring annex.largefiles avoids the speed hit.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
initremote --sameas=remotename sets sameas-name and sameas-uuid
Using sameas-name rather than name prevents old git-annex initremote
from enabling a sameas remote by name, since it would not handle it
correctly.
Straightforward, except for the issue of how to reverse LockAdjustment.
With --unlock, a commit that modifies/adds unlocked files gets reverse
adjusted to use locked files. That's fairly reasonable, I think.
But reversing --lock by unlocking all modified files feels wrong. Maybe
that's just because repositories typically seem to still have mostly
locked files in them (unless one is in an adjusted unlocked branch of
course!)
It may be that eventually how to reverse both will need to be configurable,
I don't know.
The code is only needed because for a long time, git-annex didn't
install hooks in repos on crippled filesystems. Now it does, and they
work at least on FAT (where all files are executable) and Windows.
It would be possible to remove this code in v8 simply by re-installing
the hooks.
Can be set to false to prevent any automatic repository upgrades.
Also, removed direct mode specific upgrade code in Annex.Init, and made
needsUpgrade always include the name/path of the repo, so if
there's a problem it's clear what repo has the problem.
And, made needsUpgrade catch any exceptions that might occur during the
upgrade, so it can display a more useful error message than just the
exception.
Whether or not there's a false index, it can't Restage here.
When there's a false index, restaging would alter it and not the real
index, but it fails anyway because that index is locked.
When there's not a false index, the index is locked, and so restaging
can't alter it.
No longer used. The only possible user of it would be code in
Upgrade.V5, so I verified that the parts of Annex.Content it used were
not used to manipulate direct mode files.
* Automatically convert direct mode repositories to v7 with adjusted
unlocked branches and set annex.thin.
* init: When run on a crippled filesystem with --version=5,
will error out, since version 7 is needed for adjusted unlocked branch.
* direct: This command always errors out as direct mode is no longer
supported.
* indirect: This command has become a deprecated noop.
* proxy: This command is deprecated because it was only needed in direct
mode. (But it continues to work.)
Also removed mentions of direct mode throughough the documentation.
I have not removed all the direct mode code yet.
When file matching options are specified when getting info of
something other than a directory, they won't have any effect, so error out
to avoid confusion.
This commit was sponsored by mo on Patreon.
* merge: When run with a branch parameter, merges from that branch.
This is especially useful when using an adjusted branch, because
it applies the same adjustment to the branch before merging it.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
No behavior changes, but this shows everywhere that a progress meter
could be displayed when hashing a file to add to the annex.
Many of the places don't make sense to display a progress meter though,
eg when importing the copy of the file probably swamps the hashing of
the file.
This means that Command.Move and Command.Get don't need to
manually set the stage, and is a lot cleaner conceptually.
Also, this makes Command.Sync.syncFile use the worker pool better.
In the scenario where it first downloads content and then uploads it to
some other remotes, it will start in TransferStage, then enter VerifyStage
and then go back to TransferStage for each transfer to the remotes.
Before, it entered CleanupStage after the download, and stayed in it for
the upload, so too many transfer jobs could run at the same time.
Note that, in Remote.Git, it uses runTransfer and also verifyKeyContent
inside onLocal. That has a Annex state for the remote, with no worker pool.
So the resulting calls to enteringStage won't block in there.
While Remote.Git.copyToRemote does do checksum verification, I
realized that should not use a verification slot in the WorkerPool
to do it. Because, it's reading back from eg, a removable disk to checksum.
That will contend with other writes to that disk. It's best to treat
that checksum verification as just part of the transer. So, removed the todo
item about that, as there's nothing needing to be done.
Rather than limiting it to PerformStage and CleanupStage, this opens it
up so any number of stages can be added as needed by commands.
Each concurrent command has a set of stages that it uses, and only
transitions between those can block waiting for a free slot in the
worker pool. Calling enteringStage for some other stage does not block,
and has very little overhead.
Note that while before the Annex state was duplicated on the first call
to commandAction, this now happens earlier, in startConcurrency.
That means that seek stage actions should that use startConcurrency
and then modify Annex state won't modify the state of worker threads
they then start. I audited all of them, and only Command.Seek
did so; prepMerge changes the working directory and so has to come
before startConcurrency.
Also, the remote list is built before duplicating the state, which means
that it gets built earlier now than it used to. This would only have an
effect of making commands that end up not needing to perform any actions
unncessary build the remote list (only when they're run with concurrency
enable), but that's a minor overhead compared to commands seeking
through the work tree and determining they don't need to do anything.
get, move, copy, sync: When -J or annex.jobs has enabled concurrency,
checksum verification uses a separate job pool than is used for
downloads, to keep bandwidth saturated.
Not yet done for upload checksum verification, but that only affects
remotes on local disks.
Fixes the last wart in the StartMessage transition. A few commands
include other CommandStart actions that generate output, and
do not themselves need to display a start/end message.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
* init: When the repository already has a description, don't change it.
* describe: When run with no description parameter it used to set
the description to "", now it will error out.
Importing from a special remote honors its preferred content too; unwanted
files are not imported. But, some preferred content expressions can't be
checked before files are imported, and trying to import with such an
expression will fail.
Tested this with scenarios including changing the preferred content
expression and making sure merging the import didn't delete files that were
no longer wanted.
There was one minor inefficiency mentioned in the todo that I punted on.
Prevents merging the import from deleting the non-preferred files from
the branch it's merged into.
adjustTree previously appended the new list of items to the old, which
could result in it generating a tree with multiple files with the same
name. That is not good and confuses some parts of git. Gave it a
function to resolve such conflicts.
That allowed dealing with the problem of what happens when the import
contains some files (or subtrees) with the same name as files that were
filtered out of the export. The files from the import win.
The filtering is fairly efficient as far as building the trees goes,
since it reuses adjustTree. But it still needs to traverse the whole
tree, and look up the keys used by every file.
The tree that gets recorded to export.log is the filtered tree.
This way resumes of interrupted sync to an export uses it without
needing to recalculate it. And, a change to the preferred content
settings of the remote will result in a different tree, so the export
will be updated accordingly.
The original tree is still used in the remote tracking branch.
That branch represents the special remote as a git remote, and if it
were a normal git remote, the tree in its head would not be affected by
preferred content.
Only when the preferred content expression includes them will a parse
failure due to them needing keys result in the preferred content
expression not parsing in keyless mode.
This will let import try to match preferred content expressions before
downloading the content and generating its key.
If an expression needs a key, it preferredContentParser with
preferredContentKeylessTokens will fail to parse it.
standard and groupwanted are not in preferredContentKeylessTokens
because they may refer to an expression that refers to a key.
That needs further work to support them.
Fixes bug that caused git-annex to fail to add a file when another
git-annex process cleaned up the temp directory it was using.
Solution is just to push withOtherTmp out to a higher level, so that
the whole ingest process can be completed inside it.
But in the assistant, that was not practical to do, since withOtherTmp runs
in the Annex monad and the assistant does not. Worked around by introducing
a separate temp directory that only the assistant uses for lockdown.
Since only one assistant can run at a time, it's easy to clean up that
directory of old cruft at startup.
Fix reversion in last release that caused wrong tree to be written to
remote tracking branch after an export of a subtree.
The invariant "commitsha should have the treesha as its tree"
was not met due to a bug. Guarantee it's met by catting the commitsha
to find its actual tree. A little bit slower, but this is not run often.
This way no history is lost, neither what was exported to the remote,
or the history of changes that is imported from it. No complicated
correlation of two possibly very different histories is needed, just
record what we know and then git merge will do a good job.
Also, it notices when the remote tracking branch doesn't need to be updated,
and avoids doing anything, so noop remotes are super cheap.
The only catch here is that, since the commits generated for imports
from the remote don't have a stable date or author/committer, each
(non-noop) import generates different commits for the same imported
trees. So, when the imported remote tracking branch is merged into master
and then a change is imported again, there will be an extra series of
commits, which will get more and more expensive each time.
This seems to call for making stable commits for imports. Also that
seems a good idea to make importing in several repositories have the
same result.
* Added mimeencoding= term to annex.largefiles expressions.
This is probably mostly useful to match non-text files with eg
"mimeencoding=binary"
* git-annex matchexpression: Added --mimeencoding option.
Also, look up the name in the special remote log first, only fall back
to remote name/uuid/description lookup if it fails. This should avoid
violating least surprise in cases where the special remote they wish t
rename is not enabled, or has a git remote with a different name.
Switch listContents to being a proper CommandStart, so if it throws an
exception, it will be treated like any other command action that fails.
downloadImport apparently does not ever throw an exception,
and itself uses commandAction, so it can't be a CommandStart.
In particular, when two files had the same content, and one was unlocked
and modified, with annex.thin that can corrupt the content of the
annex object, and so fsck on the other file should detect that.
getKeyStatus was relying on Database.Keys.getAssociatedFiles to tell
when a file is unlocked, but that can false positive because the
database can list old associated files.
Instead, separate out the case of unlocked object which has multiple
hardlinks when annex.thin is in use.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Avoid a warning message when renameExport is not supported, and just
fallback to deleting with a subsequent re-upload. Especially needed for
importtree remotes, where renameExport needs to be disabled.
This changes the external special remote protocol, but in a
backwards-compatible way. A reply of UNSUPPORTED-REQUEST to an older
version of git-annex will cause it to make renameExport return False.
This works, and tested syncing both gets changes from a special remote
and sends changes to it, keeping it fully in sync nicely!
But have not tried it with a subdir configured.
Users may want sync to only export, or only import and this is broadly
analagous to push and pull, so it makes sense to use the same
configuration for it.
Alternative doesn't combine the subparsers the way I wanted.
Unfortunately this new parser has suboptimal usage because everything is
all jumbled together.
For now, it's only allowed when exporttree=yes is also set.
That simplified the implementation, but could later be changed if
there's a remote that makes sense to be an import but not an export.
However, it may work just as well to make a remote be readonly to
prevent export to it while still allowing import.
The branch is only updated once the export is 100% complete. This way,
if an export is started but interrupted and so the remote does not yet
contain some of the files, an import will make a commit on the old
branch, and so won't delete the missing files.
Made some api changes.
listImportableContents needs to provide the size
of the data, so the downloader can check disk free space.
retrieveExportWithContentIdentifier is passed the filepath to write to
Use temporary "CID" key during download of a ContentIdentifier from a
remote, so withTmp can be used and then move the content to the real key
once it's known.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
Avoid performing repository fixups for submodules and git-worktrees
when there's a .noannex file that will prevent git-annex from being
used in the repository.
This change is ok as long as the .noannex file is really going to prevent
git-annex from being used. But, init --force could override the file.
Which would result in the repo being initialized without the fixups
having run.
To avoid that situation decided to change init, to not let --force be used
to override a .noannex file. Instead the user can just delete the file.
* fromkey: Added --json.
* fromkey --batch output changed to support using it with --json.
The old output was not parseable for any useful information, so
this is not expected to break anything.
If the worktree file already exists, and is annexed and uses the same
key, avoid failing, nothing needs to be done.
Had to add lookupFileNotHidden to handle the case where an adjust --hide-missing
is in use, and the worktree file was hidden due to the object content
being missing. lookupFile would return the key of the hidden file,
but it makes sense that after fromkey succeeds, the worktree must
contain the file it was supposed to set up.
Purifying exportActions will allow introspecting and modifying it,
which is needed to add progress bar display to it.
Only S3 and WebDAV ran an Annex action while constructing ExportActions.
There was a small performance gain from them doing that, since a
resource was able to be prepared and reused for multiple actions by
Command.Export.
As seen in commit 809cfbbd8a and
5d394023eb S3 and WebDAV actually create a
new handle for each access in normal, non-export use. It doesn't seem
worth making export use of them marginally more efficient than normal
use. It would be better to do that work upfront when constructing the
remote. Or perhaps use a MVar to cache a handle.
This commit was sponsored by Nick Piper on Patreon.
Like the earlier fixed one in Command.Export, it occurred when the same
tree was exported by multiple clones. Previous fix was incomplete since
several other places looked at the list of exported trees to detect when
there was an export conflict. Added a single unified function to avoid
missing any places it needed to be fixed.
This commit was sponsored by mo on Patreon.
The object is supposed to be present on the readonly remote; have to
assume the location log is right about that, so the presence check
should succeed.
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
This reverts commit 4536c93bb2.
That broke Read/Show of a Key, and unfortunately Key is read in at least
one place; the GitAnnexDistribution data type.
It would be worth bringing this optimisation back, but it would need
either a custom Read/Show instance that preserves back-compat, or
wrapping Key in a data type that contains the serialization, or changing
how GitAnnexDistribution is serialized.
Also, the Eq instance would need to compare keys with and without a
cached seralization the same.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
It means that every place a Key has any of its fields changed, the cache
has to be dropped. I've grepped and found them all. But, it would be
better to avoid that gotcha somehow..
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
A keyName could contain "/", though this is unlikely and certianly only
ever could happen with WORM keys.
The change to addunused to escape that is no problem at all.
The change to VariantFile to escape it means that different versions of
git-annex could resolve a merge conflict differently in this case, which
is unfortunate. There would be different .variant files used, so the two
resolutions would themselves merge together without additional
conflicts, but the user would have to clean up the extra .variant
files.
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
This should make == comparison of UUIDs somewhat faster, and perhaps a
few other operations around maps of UUIDs etc.
FromUUID/ToUUID are used to convert String, which is still used for all
IO of UUIDs. Eventually the hope is those instances can be removed,
and all git-annex branch log files etc use ByteString throughout, for a
real speed improvement.
Note the use of fromRawFilePath / toRawFilePath -- while a UUID usually
contains only alphanumerics and so could be treated as ascii, it's
conceivable that some git-annex repository has been initialized using
a UUID that is not only not a canonical UUID, but contains high unicode
or invalid unicode. Using the filesystem encoding avoids any problems
with such a thing. However, a NUL in a UUID seems extremely unlikely,
so I didn't use encodeBS / decodeBS to avoid their extra overhead in
handling NULs.
The Read/Show instance for UUID luckily serializes the same way for
ByteString as it did for String.
