POSIX character classes allowed in globs was a surprise, but just
happened to fall out of the implementation in a way that seems
to behave correctly.
mdwn2man has to be tweaked to render the example properly.
The line I modified is the one that strips ikiwiki wikilinks out of the
man page.
Sponsored-by: Graham Spencer on Patreon
Had to convert uninit to do everything that can error out inside a
CommandStart. This was harder than feels nice.
(Also, in passing, converted CommandCheck to use a data type, not a
weird number that it was not clear how it managed to be unique.)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Seems unlikely to be too useful, but who knows.
Moved the checkSafeConfig call to happen after an action is started, so
it will be captured by --json-error-messages
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Including special --whatelse handling.
Otherwise, it seems unlikely to be too useful, but who knows.
Refactored code to call starting before displaying error messages.
This makes the error messages be captured by --json-error-messages
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Seems unlikely to be very useful, but trivial.
And, this completes the story that git-annex sync does not need json,
since every sub-operation is available in a command that does support json.
(Well, except for committing, but that's not a git-annex command.)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Both -J and --json needed importfeed to be refactored to use commandAction.
That was difficult, because of the interrelated nature of downloading feeds
and then downloading files from feeds, both of which needed to use
commandAction. And then checking for problems in feeds has to come after
these actions, which may be run as background jobs.
As for --json support, it's most of the way there, but still has some
warts, so I didn't enable jsonOptions yet. The warts include:
- An initial empty json record is displayed by getCache.
- Input is not populated, should be feed url
- feedProblem at end will not be captured by --json-error-messages
(see FIXME)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Also fix support for operating on multiple pairs of files and keys.
Moved notAnnexed to inside starting, so error message will get into the json.
Cannot include the key in the starting as it's not known yet, so instead
add it to the json later.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Dunno how useful this will be, since about all that's accessible from
the json is whether it succeeded or failed, and the error messages
which were already on stderr.
Note that, when autoenabling a special remote, it would be possible for
one to stop and prompt or output not using Messages and so not output as
part of the json. I don't think that happens, but I'm not 100% sure
something doesn't manage to break it. Of course, the same could be the
case for commands that transfer objects. Using Annex.Init.autoEnableSpecialRemotes
in --json mode would avoid the problem, but I've chosen to wait until I
know it's needed to use it.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Generalized AddJSONActionItemField to allow it to add several fields. Not entirely
happy with that, since the names of the fields have to be carefully chosen to
not conflict with other json fields. And fields added that way can't be parsed
back in FromJSON, except for the "fields" field that is special cased for metadata.
Still, I couldn't see another way to do it.
Also, omit file:null from the json output. Which does affect other commands,
eg git-annex whereis --all --json. Hopefully that won't break something that expects
a null file. If it did, that could be reverted, but it would be ugly to have
file:null in the unused --json
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
For expire, the normal output is unchanged, but the --json output includes the uuid
in machine parseable form. Which could be very useful for this somewhat obscure
command. That needed ActionItemUUID to be implemented, which seemed like a lot
of work, but then ---
I had been going to skip implementing them for trust, untrust, dead, semitrust,
and describe, but putting the uuid in the json is useful information, it tells
what uuid git-annex picked given the input. It was not hard to support
these once ActionItemUUID was implemented.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This also changes addunused to display the names of the files that it adds.
That seems like a general usability improvement, and not displaying the input
number does not seem likely to be a problem to a user, since the filename
is based on the key. Displaying the filename was necessary to get it and the key
included in the json.
dropunused does not include the key in the json. It would be possible to
add, but would need more changes. And I doubt that dropunused --json
would be used in a situation where a program cared which keys were
dropped. Note that drop --unused does have the key in its json, so such
a program could just use it. Or could just dropkey --batch with the
specific keys it wants to drop if it cares about specific keys.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Also in passing the --all display was fixed up to not quote keys like filenames.
Note that the check added to compareChanges was needed to avoid logging when
nothing changed.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
The json does not include an url field, but it does have an input field that is
"file url" when using --batch and ["file", "url"] when using the command line.
I chose not to change that because it would complicate batchInput.
An url field could be added if it turns out to be useful.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This makes annexFileMode be just an application of setAnnexPerm',
which avoids having 2 functions that do different versions of the same
thing.
Fixes some buggy behavior for some combinations of core.sharedRepository
and umask.
Sponsored-by: Jack Hill on Patreon
This spams the user with a lot of messages, but it seems like busywork to
avoid that and only warn once, since this warning will go away when it gets
implemented.
Also fix parsing of the octal value.
Sponsored-by: Kevin Mueller on Patreon
That's too much quoting, the user expects the filename to be copy and
pasteable. It would be ok to slash-escape space ('\ ')
which is what gnu find does, but it doesn't seem necessary either.
${escaped_file} has always quoted spaces though, so keep on doing it
there.
Sponsored-by: Nicholas Golder-Manning on Patreon
When a nonexistant file is passed to a command and --json-error-messages
is enabled, output a JSON object indicating the problem.
(But git ls-files --error-unmatch still displays errors about such files in
some situations.)
I don't like the duplication of the name of the command introduced by this,
but I can't see a great way around it. One way would be to pass the Command
instead.
When json is not enabled, the stderr is unchanged. This is necessary
because some commands like find have custom output. So dislaying
"find foo not found" would be wrong. So had to complicate things with
toplevelFileProblem having different output with and without json.
When not using --json-error-messages but still using --json, it displays
the error to stderr, but does display a json object without the error. It
does have an errorid though. Unsure how useful that behavior is.
Sponsored-by: Dartmouth College's Datalad project
This reverts commit a325524454.
Turns out this was predicated on an incorrect belief that json output
didn't already sometimes lack the "key" field. Since json output already
can when `giveup` was used, it seems unncessary to add a whole new
option for this.
Added a --json-exceptions option, which makes some exceptions be output in json.
The distinction is that --json-error-messages is for messages relating
to a particular ActionItem, while --json-exceptions is for messages that
are not, eg ones for a file that does not exist.
It's unfortunate that we need two switches with such a fine distinction
between them, but I'm worried about maintaining backwards compatability
in the json output, to avoid breaking anything that parses it, and this was
the way to make sure I didn't.
toplevelWarning is generally used for the latter kind of message. And
the other calls to toplevelWarning could be converted to showException. The
only possible gotcha is that if toplevelWarning is ever called after
starting acting on a file, it will add to the --json-error-messages of the
json displayed for that file and converting to showException would be a
behavior change. That seems unlikely, but I didn't convery everything to
avoid needing to satisfy myself it was not a concern.
Sponsored-by: Dartmouth College's Datalad project
New command, currently limited to changing autoenable= setting of a special remote.
It will probably never be used for more than that given the limitations on
it.
Sponsored-by: Brock Spratlen on Patreon
enableremote: Support enableremote of a git remote (that was previously set
up with initremote) when additional parameters such as autoenable= are
passed.
The enableremote special case for regular git repos is intended to handle
ones that don't have a UUID probed, and the user wants git-annex to
re-probe. So, that special case is still needed. But, in that special
case, the user is not passing any extra parameters. So, when there are
parameters, instead run the special remote setup code. That requires there
to be a uuid known already, and it allows changing things like autoenable=
Remote.Git.enableRemote changed to be a no-op if a git remote with the name
already exists. Which it generally will in this case.
Sponsored-by: Jack Hill on Patreon
I'm on the fence about this. Notice that pulling from a git remote can
pull branches that have escape sequences in their names. Git will
display those as-is. Arguably git should try harder to avoid that.
But, names of remotes are usually up to the local user, and autoenable
changes that, and so it makes sense that git chooses to display control
characters in names of remotes, and so autoenable needs to guard against
it.
Sponsored-by: Graham Spencer on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
As well as escape sequences, control characters seem unlikely to be desired when
doing addurl, and likely to trip someone up. So disallow them as well.
I did consider going the other way and allowing filenames with control characters
and escape sequences, since git-annex is in the process of escaping display
of all filenames. Might still be a better idea?
Also display the illegal filename git quoted when it rejects it.
Sponsored-by: Nicholas Golder-Manning on Patreon
Added StringContainingQuotedPath, which is used for ActionItemOther.
In the process, checked every ActionItemOther for those containing
filenames, and made them use quoting.
Sponsored-by: Graham Spencer on Patreon
registerurl: When an url is claimed by a special remote other than the web,
update location tracking for that special remote.
registerurl's behavior was changed in commit
451171b7c1, apparently accidentially to not
update location tracking except for the web.
This makes registerurl followed by unregisterurl not be a no-op, when the
url happens to be claimed by a remote other than the web. It is a noop when
the url is unclaimed except by the web. I don't like the inconsistency,
and wish that registerurl and unregisterurl never updated location
tracking, which would be more in keeping with them being plumbing.
But there is the fact that it used to behave this way, and also it was
inconsistent that it updated location tracking for the web but not for
other remotes, unlike addurl. And there's an argument that the user might
not know what remote to expect to claim an url, so would be considerably in
the dark when using registerurl. (Although they have to know what content
gets downloaded, since they specify a key..)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This serves two purposes. --remote=web bypasses other special remotes that
claim the url, same as addurl --raw. And, specifying some other remote
allows making sure that an url is claimed by the remote you expect,
which makes then using setpresentkey not be fragile.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
