It started exporting a isSymbolicLink which supports windows. But,
git-annex does no use symlinks on windows yet and this conflicts with the
function by the same name from unix-compat, so hide it.
This way, the git-annex-standalone.deb, which does set GIT_ANNEX_APP_BASE,
will not have the assistant install wrappers that it does not need to,
since git-annex is installed system wide from a package.
git 2.8.1 (or perhaps 2.9.0) is going to prevent git merge from merging in
unrelated branches. Since the webapp's pairing etc features often combine
together repositories with unrelated histories, work around this behavior
change by setting GIT_MERGE_ALLOW_UNRELATED_HISTORIES when the assistant
merges.
Note though that this is not done for git annex sync's merges, so
it will follow git's default or configured behavior.
When annex.thin is set, adding an object will add the execute bits to the
work tree file, and this does mean that the annex object file ends up
executable.
This doesn't add any complexity that wasn't already present, because git
annex add of an executable file has always ingested it so that the annex
object ends up executable.
But, since an annex object file can be executable or not, when populating
an unlocked file from one, the executable bit is always added or removed
to match the mode of the pointer file.
So, it will pull and push the original branch, not the adjusted one.
And, for merging, it will use updateAdjustedBranch (not implemented yet).
Note that remaining uses of Git.Branch.current need to be checked too;
for things that should act on the original branch, and not the adjusted
branch.
* Removed the webapp-secure build flag, rolling it into the webapp build
flag.
* Removed the quvi and tahoe build flags, which only adds aeson to
the core dependencies.
* Removed the feed build flag, which only adds feed to the core
dependencies.
Build flags have cost in both code complexity and also make Setup configure
have to work harder to find a usable set of build flags when some
dependencies are missing.
Previously, it only flushed when the queue got larger than 1.
Also, make the queue auto-flush when items are added, rather than needing
to be flushed as a separate step. This simplifies the code and make it more
efficient too, as it avoids needing to read the queue out of the state to
check if it should be flushed.
Linking the file to the tmp dir was not necessary in the clean
filter, and it caused the ctime to change, which caused git to think
the file was changed. This caused git status to get slow as it kept
re-cleaning unchanged files.
Fixes several bugs with updates of pointer files. When eg, running
git annex drop --from localremote
it was updating the pointer file in the local repository, not the remote.
Also, fixes drop ../foo when run in a subdir, and probably lots of other
problems. Test suite drops from ~30 to 11 failures now.
TopFilePath is used to force thinking about what the filepath is relative
to.
The data stored in the sqlite db is still just a plain string, and
TopFilePath is a newtype, so there's no overhead involved in using it in
DataBase.Keys.
In v6 unlocked mode, this fixes a problem that was making eg,
echo > file cause the assistant to copy the file to the annex object,
instead of hard linking it. That because 2 change events were seen
(one for opening the file and one for closing) and processed together
the file was then locked down twice. Which meant it had mutiple hard links,
and so prevented linkAnnex from hard linking it.
There might be scenarios where multiple events come in, but staggered such
that a file gets locked down repeatedly, and it would still be copied to
the annex object in that case.
This can happen when ingesting a new file in either locked or unlocked
mode, when some unlocked files in the repo use the same key, and the
content was not locally available before.
There should be no behavior changes in this commit, it just adds a more
expressive data type and adjusts code that had been passing around a [UUID]
or sometimes a Maybe Remote to instead use [VerifiedCopy].
Although, since some functions were taking two different [UUID] lists,
there's some potential for me to have gotten it horribly wrong.
Also, rename lockContent to lockContentExclusive
inAnnexSafe should perhaps be eliminated, and instead use
`lockContentShared inAnnex`. However, I'm waiting on that, as there are
only 2 call sites for inAnnexSafe and it's fiddly.
It's confusing, easy to select by accident and get into a situation the
webapp offers no easy recovery from, and pausing syncing works just as well
in most situations.
Added support for storageclass=STANDARD_IA to use Amazon's
new Infrequently Accessed storage.
Also allows using storageclass=NEARLINE to use Google's NearLine storage.
The necessary changes to aws to support this are in
https://github.com/aristidb/aws/pull/176
When gpg.program is configured, it's used to get the command to run for
gpg. Useful on systems that have only a gpg2 command or want to use it
instead of the gpg command.
yesod-core-1.4.14 changed the Template Haskell behind the expansion of
mkYesodData, such that it now must have the application data type
declared before it is called. This change simply moves the call to
mkYesodData to be after the data type it wants to access is declared.
https://github.com/yesodweb/yesod/issues/1059 has some discussion of the
issue from the Yesod side.
This works, but needs more testing and work on cases like encrypted repos,
enabling existing repositories, etc.
This commit was sponsored by Shaun Westmacott.
This was a reversion caused by the relative path changes in 5.20150113.
Other uses of addAuthorizedKeys seem to be ok. If the user enters a
directory like ~/annex, it writes GIT_ANNEX_SHELL_DIRECTORY=annex, and
git-annex-shell assumes that's relative to HOME.
This removes a bit of complexity, and should make things faster
(avoids tokenizing Params string), and probably involve less garbage
collection.
In a few places, it was useful to use Params to avoid needing a list,
but that is easily avoided.
Problems noticed while doing this conversion:
* Some uses of Params "oneword" which was entirely unnecessary
overhead.
* A few places that built up a list of parameters with ++
and then used Params to split it!
Test suite passes.
I've tested all the dataenc to sandi conversions except Assistant.XMPP,
and all have unchanged behavior, including behavior on large unicode code
points.
webapp: When adding another local repository, and combining it with the
current repository, the new repository's remote path was set to "." rather
than the path to the current repository. This was a reversion caused by the
relative path changes in 5.20150113.
Most of the time, there will be no discreprancy between programPath and
readProgramFile.
But, the programFile might have been written by an old version of git-annex
that is still installed, while a newer one is currently running. In this
case, we want to run the same one that's currently running.
This is especially important for things like the GIT_SSH=git-annex used for
ssh connection caching.
The only code that still uses readProgramFile directly is the upgrade code,
which needs to know where the standalone git-annex was installed, in order to
upgrade it.
Note that while the assistant detects changes made to remote names, I left
the commit message fixed rather than calculating it after every commit. It
doesn't seem worth the CPU to do the latter.
* init: Repository tuning parameters can now be passed when initializing a
repository for the first time. For details, see
http://git-annex.branchable.com/tuning/
* merge: Refuse to merge changes from a git-annex branch of a repo
that has been tuned in incompatable ways.
This is necessary for interop between inode caches created on unix and
windows. Which is more important than supporting inodecaches for large keys
with the wrong size, which are broken anyway.
There should be no slowdown from this change, except on Windows.
Avoid using fileSize which maxes out at just 2 gb on Windows.
Instead, use hFileSize, which doesn't have a bounded size.
Fixes support for files > 2 gb on Windows.
Note that the InodeCache code only needs to compare a file size,
so it doesn't matter it the file size wraps. So it has been
left as-is. This was necessary both to avoid invalidating existing inode
caches, and because the code passed FileStatus around and would have become
more expensive if it called getFileSize.
This commit was sponsored by Christian Dietrich.
Reverts 965e106f24
Unfortunately, this caused breakage on Windows, and possibly elsewhere,
because parentDir and takeDirectory do not behave the same when there is a
trailing directory separator.
parentDir is less safe than takeDirectory, especially when working
with relative FilePaths. It's really only useful in loops that
want to terminate at /
This commit was sponsored by Audric SCHILTKNECHT.
This allows using Git.Remote w/o needing to have Git.BuildVersion, which
requires configure. It will simplify github-backup when these libraries are
used there.
Didn't know that this library existed!
This includes making git-annex not re-exec itself on start on windows, and
making the test suite on Windows run tests without forking.
This reverts commit dd667844b6
and commit e6eff0e951.
Those commits were fine, except the android autobuilder currently has a bit
of a mess of yesod versions and broke. Better to wait on this.
The new yesod needs the ViewPatterns extension.
Also, a TH splice in Assistant/Threads/WebApp.hs failed to work without
OverLoadedStrings.
This commit was sponsored by Brock Spratlen.
Only use that when building with ancient yesod, which does not include it.
This also let me remove ifdefs in the file to support building with the new
version of yesod.
Found these with:
git grep "^ " $(find -type f -name \*.hs) |grep -v ': where'
Unfortunately there is some inline hamlet that cannot use tabs for
indentation.
Also, Assistant/WebApp/Bootstrap3.hs is a copy of a module and so I'm
leaving it as-is.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
This fixed one bug where it needed to be and wasn't (in Assistant.Unused).
And also found one place where lockContent was used unnecessarily (by
drop --from remote).
A few other places like uninit probably don't really need to lockContent,
but it doesn't hurt to do call it anyway.
This commit was sponsored by David Wagner.
The crash came from calling Git.repoLocation, but it made sense to fix this
higher up, because there is nothing to edit about the web, it just is what
it is.
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
Based on the example from the tip, but modified to cd into the repo before
running git-annex, since konqueror does not. Also, at least on my system,
the directory is ~/.kde, not ~/.kde4. (konqueror 4.12.4)
This commit was sponsored by Jürgen Peters.
Support users who have set commit.gpgsign, by disabling gpg signatures for
git-annex branch commits and commits made by the assistant.
The thinking here is that a user sets commit.gpgsign intending the commits
that they manually initiate to be gpg signed. But not commits made in the
background, whether by a deamon or implicitly to the git-annex branch.
gpg signing those would be at best a waste of CPU and at worst would fail,
or flood the user with gpg passphrase prompts, or put their signature on
changes they did not directly do.
See Debian bug #753720.
Also makes all commits done by git-annex go through a few central control
points, to make such changes easier in future.
Also disables commit.gpgsign in the test suite.
This commit was sponsored by Antoine Boegli.
Someone reported:
gpg: WARNING: unsafe permissions on homedir `/var/folders/m6/zkd11n111m38ff37zbtgq0lr0000gp/T/git-annex-gpg.tmp.0'
Just a warning, but let's fix it anyway. Preumably the user has one of the
many insane and delightful umasks users sometimes use to shoot themselves
in their feet.
Yes, this means that git annex webapp on windows execs git-annex, which
execs itself to set env, and the execs itself again to redirect logs.
This is disgusting. This is Windows(TM).
When in direct mode, update the master branch after committing to the
annex/direct/master branch. Also, update the synced/master branch.
This fixes a topology A->B where both A and B are in direct mode and
running the assistant, and a change is made to B. Before this fix, A pulled
the changes from B, but since they were only on the annex/direct/master
branch, it did not merge them.
Note that I considered making the assistant merge the
remotes/B/annex/direct/master, but decided to keep it simple and only merge
the sync branches as before.
On Windows, changing the time zone causes the apparent mtime of files to
change. This confuses git-annex, which natually thinks this means the files
have actually been modified (since THAT'S WHAT A MTIME IS FOR, BILL <sheesh>).
Work around this stupidity, by using the inode sentinal file to detect if
the timezone has changed, and calculate a TSDelta, which will be applied
when generating InodeCaches.
This should add no overhead at all on unix. Indeed, I sped up a few
things slightly in the refactoring.
Seems to basically work! But it has a big known problem:
If the timezone changes while the assistant (or a long-running command)
runs, it won't notice, since it only checks the inode cache once, and
so will use the old delta for all new inode caches it generates for new
files it's added. Which will result in them seeming changed the next time
it runs.
This commit was sponsored by Vincent Demeester.
This version of wai changed the type of Middleware, so I cannot seem
to liftIO inside it. So, got rid of a lot of not really needed
complexity to use System.Log.Logger's logging stuff, and just use
the standard wai stdout logger when debug logging is enabled.
Format may change some, and it logs http to stdout instead of stderr
now. Doesn't matter for the webapp since both go to the same log anyway.
This avoids a collision if different ssh ports are used on the same host
for some reason.
Note that it's ok to change the format of the mangled hostname; unmangling
only extracts the hostname from it, and once ssh is configured for a
mangled hostname, that config is not changed.
avoid editing repo for same reasons as in
52601eb606
avoid stomping on its description, even though no description exists until
after syncing is complete
Just after enabing a ssh remote, we've not synced with it yet, so its
description and group are not known. So, avoid showing edit form so user
doesn't see blank info. Instead, redirect to dashboard.
Avoid stomping on existing group and preferred content settings
when enabling or combining with an already existing remote.
Two level fix. First, use defaultStandardGroup rather than
setStandardGroup, so if there is an existing configuration in the git-annex
branch, it's not overwritten.
To handle pre-existing ssh remotes (including gcrypt), a second level is
needed, because before syncing with the remote, it's configuration won't be
available locally. (And syncing could take a long time.) So, in this case,
keep track of whether the remote is being created or enabled, and only set
configs when creating it.
This commit was sponsored by Anders Lannerback.
When adding a repo from a removable drive that already exists, fetch
from it before showing the edit form, so it will have the existing
configuration of that repo.
This does mean that if the webapp is asked to add a git repository on
a removable drive that already exists, but is not yet a git-annex
repository, it will avoid putting it in any group. That unlikely edge case
is ok; the next step is the edit repository screen, which will show it's
not in any group and the user can pick one.
There was a tricky bit here, when it does combine, the edit form is shown,
and so the info needs to be committed to the new repository, but then
pulled into the current one. And caches need to be invalidated for it
to be visible in the edit form.
This is the capstone in making the webapp remember ssh remotes
so they can be easily enabled in other clones of the repository.
Currently, the user will need to enter a password to enable the ssh remote,
but everything else is filled in automatically.
This commit was sponsored by Peter Lloyd.
The repository must have been added using initremote.
Turned out to be much much simpler than expected, because I was able to
reuse the existing code for enabling rsync and gcrypt remotes, which
was already sufficiently general that it will also work for ssh remotes.
Total win!
This commit was sponsored by an unknown bitcoin contributor.
Note that TransferInfo does not always contain the Remote, although
any transfer added to the TransferQueue does have a Remote in its
TransferInfo. The transferkeys command still accepts a UUID, which is
useful to handle upgrades, where an old assistant version runs the new
transferkeys.
This commit was sponsored by Kalle Svensson.
Broken by 958312885f, in November!
I missed this because there's no strong type checking across the AJAX call. :(
Need to switch to Fay to avoid such bugs..
Avoid any possibilty of prompting in ssh setup in webapp.
Prticularly on Windows this was a problem, it seemed to enter an infinite
loop. I think that ssh can sometimes use SSH_ASKPASS for y/n prompting,
when no controlling TTY is available, and since git-annex always answers
back with the host's password, not y/n, it looped.
This commit was sponsored by Simon Michael.
When setting up a remote on a ssh server, prompt for a password inside the
webapp, rather than relying on ssh's own password prompting in the terminal
the webapp was started from, or ssh-askpass.
Avoids double prompting for the ssh password (and triple-prompting on
windows for rsync.net), since the entered password is cached for 10 minutes
and this cached password is reused when setting up the repository, after
the initial probe.
When the user has an existing ssh key set up, they can choose to use it,
rather than entering a password. The webapp used to probe for this case
automatically, so this is a little harder, but it's an advanced user thing.
Note that this commit is known to break enabling existing rsync
repositories. It hs not been tested with gcrypt repositories. It's not been
successfully tested yet on Windows.
This commit was sponsored by Ralph Mayer.
This should fix the android build. The EvilSplicer cannot fix up ghc's
misformatting of a case expression with a construstor with a lot of
parameters, which spans multiple lines.
Note that this does not yet use SecureMem. It would probably make sense for
the Password part of a CredPair to use SecureMem, and making that change
is better than passing in a String and having it converted to SecureMem in
this code.
* webapp: Support using git-annex on a remote server, which was installed
from the standalone tarball or OSX app, and so does not have
git-annex in PATH (and may also not have git or rsync in PATH).
* standalone tarball, OSX app: Install a ~/.ssh/git-annex-wrapper, which
can be used to run git-annex, git, rsync, etc.
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
This is a better approach to finding both when NM has lost a network
connection, and when a new network connection is made by NM.
Tested with network-manager 0.9.8.8.
This commit was sponsored by Cedric Staub.
* Remote system might be available, and connection get lost. Should
reconnect, but needs to avoid bad behavior (ie, constant reconnect
attempts.) Use exponential backoff.
* Detect if old system had a too old git-annex-shell, and show the user
a nice message in the webapp. Required parsing error messages, so perhaps
this code shoudl be removed once enough time has passed..
* Switch the protocol to using remote URI's, rather than remote names.
Names change. Also avoids issues with serialization of names containing
whitespace.
This is nearly ready for merge into master now. I'd still like to make the ssh
transport smarter about reusing ssh connection caching during git pull.
This commit was sponsored by Jim Paris.
a ssh remote, and pulls.
XMPP is no longer needed in this configuration!
Requires the remote server have git-annex-shell with notifychanges support.
(untested)
This commit was sponsored by Geog Wechslberger.
This includes checking when dropping files that any required content
configuration is satisfied. However, it does not yet include an active
check on the required content; the location log is trusted when checking
the required content expression.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
git-annex-shell does not need a pty, so this speeds things up.
Also, it may avoid weird misconfigured systems that try to run screen or
tmux on every ssh login from doing so.
This is a new feature, it was not handled before, since it's a bit of an
edge case. However, it can be handled exactly the same as a file/dir
conflict, just leave the non-annexed item alone.
While implementing this, the core resolveMerge' function got a lot simpler
and clearer. Note especially that where before there was an asymetric call to
stagefromdirectmergedir, now graftin is called symmetrically in both cases.
And, in order to add that `graftin us`, the current branch needed to be
known (if there is no current branch, there cannot be a merge conflict).
This led to some cleanups of how autoMergeFrom behaved when there is no
current branch.
This commit was sponsored by Philippe Gauthier.
Trying to start in such a repo will, obviously, fail.
Note that assistant --autostart will try to start in such a repo, and fail,
but does start successfully in the other autostart repos.
This allows eg, putting .git/annex/tmp on a ram disk, if the disk IO
of temp object files is too annoying (and if you don't want to keep
partially transferred objects across reboots).
.git/annex/misctmp must be on the same filesystem as the git work tree,
since files are moved to there in a way that will not work cross-device,
as well as symlinked into there.
I first wanted to put the tmp objects in .git/annex/objects/tmp, but
that would pose transition problems on upgrade when partially transferred
objects existed.
git annex info does not currently show the size of .git/annex/misctemp,
since it should stay small. It would also be ok to make something clean it
out, periodically.
Removed instance, got it all to build using fromRef. (With a few things
that really need to show something using a ref for debugging stubbed out.)
Then added back Read instance, and made Logs.View use it for serialization.
This changes the view log format.
