My implementation does not guard against double locking of the journal. But
it does ensure that the journal is always locked when operated on, by using
a type that is only produced by lockJournal, and which is required as a
parameter of all functions that operate on the journal.
Note that I had to add the fooStale functions for cases where it does not
make sense to lock the journal when querying it. I was more concerned about
ensuring that anything that modifies the journal is locked.
setJournalFile's implementation ensures that any query of the journal will
get one value or the other atomically, even if the journal is being changed
at the time.
This may not strictly be needed -- the transition code bypasses the
journal. However, this ensures that the git-annex branch is only
committed with the journal locked. This will allow for further
improvements.
Overridable with --user-agent option.
Not yet done for S3 or WebDAV due to limitations of libraries used --
nether allows a user-agent header to be specified.
This commit sponsored by Michael Zehrer.
Since 006cf7976f was incomplete, not being
able to get the right mode of the file when the index differs from HEAD,
this is a final workaround. Only buffering the start of the file
in this case avoids leaking memory.
This does not prevent git-cat-file being asked to output the whole file,
which needs to be consumed, and can be slow. But this only happens in a
rare edge case.
Done using a mode witness, which ensures it's fixed everywhere.
Fixing catFileKey was a bear, because git cat-file does not provide a
nice way to query for the mode of a file and there is no other efficient
way to do it. Oh, for libgit2..
Note that I am looking at tree objects from HEAD, rather than the index.
Because I cat-file cannot show a tree object for the index.
So this fix is technically incomplete. The only cases where it matters
are:
1. A new large file has been directly staged in git, but not committed.
2. A file that was committed to HEAD as a symlink has been staged
directly in the index.
This could be fixed a lot better using libgit2.
The second commit had some bad refs which resulted in the race detection
code running. But that commit was unnecessary anyway, it only was there to
merge in the other refs.
Wrote nice pure transition calculator, and ugly code to stage its results
into the git-annex branch. Also had to split up several Log modules
that Annex.Branch needed to use, but that themselves used Annex.Branch.
The transition calculator is limited to looking at and changing one file at
a time. While this made the implementation relatively easy, it precludes
transitions that do stuff like deleting old url log files for keys that are
being removed because they are no longer present anywhere.
Works, more or less. --dead is not implemented, and so far a new branch
is made, but keys no longer present anywhere are not scrubbed.
git annex sync fails to push the synced/git-annex branch after a forget,
because it's not a fast-forward of the existing synced branch. Could be
fixed by making git-annex sync use assistant-style sync branches.
When quvi is installed, git-annex addurl automatically uses it to detect
when an page is a video, and downloads the video file.
web special remote: Also support using quvi, for getting files,
or checking if files exist in the web.
This commit was sponsored by Mark Hepburn. Thanks!
Requires git 1.8.4 or newer. When it's installed, a background
git check-ignore process is run, and used to efficiently check ignores
whenever a new file is added.
Thanks to Adam Spiers, for getting the necessary support into git for this.
A complication is what to do about files that are gitignored but have
been checked into git anyway. git commands assume the ignore has been
overridden in this case, and not need any more overriding to commit a
changed version.
However, for the assistant to do the same, it would have to run git ls-files
to check if the ignored file is in git. This is somewhat expensive. Or it
could use the running git-cat-file process to query the file that way,
but that requires transferring the whole file content over a pipe, so it
can be quite expensive too, for files that are not git-annex
symlinks.
Now imagine if the user knows that a file or directory tree will be getting
frequent changes, and doesn't want the assistant to sync it, so gitignores
it. The assistant could overload the system with repeated ls-files checks!
So, I've decided that the assistant will not automatically commit changes
to files that are gitignored. This is a tradeoff. Hopefully it won't be a
problem to adjust .gitignore settings to not ignore files you want the
assistant to autocommit, or to manually git annex add files that are listed
in .gitignore.
(This could be revisited if git-annex gets access to an interface to check
the content of the index w/o forking a git command. This could be libgit2,
or perhaps a separate git cat-file --batch-check process, so it wouldn't
need to ship over the whole file content.)
This commit was sponsored by Francois Marier. Thanks!
Started with a problem when running addurl on a really long url,
because the whole url is munged into the filename. Ended up doing
a fairly extensive review for places where filenames could get too large,
although it's hard to say I'm not missed any..
Backend.Url had a 128 character limit, which is fine when the limit is 255,
but not if it's a lot shorter on some systems. So check the pathconf()
limit. Note that this could result in fromUrl creating different keys
for the same url, if run on systems with different limits. I don't see
this is likely to cause any problems. That can already happen when using
addurl --fast, or if the content of an url changes.
Both Command.AddUrl and Backend.Url assumed that urls don't contain a
lot of multi-byte unicode, and would fail to truncate an url that did
properly.
A few places use a filename as the template to make a temp file.
While that's nice in that the temp file name can be easily related back to
the original filename, it could lead to `git annex add` failing to add a
filename that was at or close to the maximum length.
Note that in Command.Add.lockdown, the template is still derived from the
filename, just with enough space left to turn it into a temp file.
This is an important optimisation, because the assistant may lock down
a bunch of files all at once, and using the same template for all of them
would cause openTempFile to iterate through the same set of names,
looking for an unused temp file. I'm not very happy with the relatedTemplate
hack, but it avoids that slowdown.
Backend.WORM does not limit the filename stored in the key.
I have not tried to change that; so git annex add will fail on really long
filenames when using the WORM backend. It seems better to preserve the
invariant that a WORM key always contains the complete filename, since
the filename is the only unique material in the key, other than mtime and
size. Since nobody has complained about add failing (I think I saw it
once?) on WORM, probably it's ok, or nobody but me uses it.
There may be compatability problems if using git annex addurl --fast
or the WORM backend on a system with the 255 limit and then trying to use
that repo in a system with a smaller limit. I have not tried to deal with
those.
This commit was sponsored by Alexander Brem. Thanks!
This is ok to do now that the socket filename never needs to be mapped back
to a hostname.
Short hostnames will still appear in the clear, which is less obfuscated.
So this cannot possibly make ssh connection caching fail for a hostname it
used to work for.
Turns out that with -O stop -S socketfile, ssh does not need the real
hostname, or port to be specificed. This is because it simply talks to the
ssh behind the socket and tells it to stop. So, can eliminate the
conversion back from a socketfile to host and port. Which will allow using
shorter filenames for sockets in the future.
If the file is > 8192 bytes, it's certianly not a symlink file.
And if it contains nuls or newlines or whitespace, it's certianly
not a link to annexed content. But it might be a tarball containing
a git-annex repo.
This hack is only needed on FAT filesystems, so there's no point in doing
it the rest of the time. And it's possible for there to be a false
positive, so it's best to avoid the hack when possible.
Test suite on windows failed running git annex init in a bare clone of an
annexed repo. The annex directory didn't exist when it tried to write the
inode sentinal file.
Yeah, that didn't actually work. Got error messages like it couldn't read
from the control socket, so probably ssh doesn't really support that on
Windows, at least the cygwin ssh build I'm using.
On Windows, that means the file could still be open when later code wants
to delete it, which fails. Since we're only reading 8k anyway, just read
it, strictly. However, avoid reading the whole file strictly, so no
getContentsStrict here.
If the cleanup of a single file fails for some reason, continue
to clean up other files.
This could happen because of a race. The merge pulls in a change to a file,
which gets changed locally at the same time.
Made fromDirect check that a file in the tree has good content (and is not
a broken symlink either) before copying it to another file that has the
same key.
Made replaceFile clean up the temp file if the action that creates it, or
the file replacement action fails.
This was also tripped by the test suite's automatic conflict resolution
test. Which also shows BTW that an unnecessary copy of content is done
sometimes when merging in direct mode. Not going to try to speed that up
now.
This bug was turned up by the test suite, running fsck in direct mode.
A repository was cloned, was put into direct mode, was fscked, and fsck
incorrectly said that no copy existed of a file, that was actually present
in origin.
This turned out to occur because fsck first did a Annex.Branch.change,
recording that it did not locally have the file. That was recorded in the
journal. Since neither the git annex direct not the fsck had yet needed to
read any info from the branch, but had only made changes to it, the
origin/git-annex branch was not yet merged in. So the journal got a
location log entry written to it, but this did not include
the location log info for the origin. When fsck then did a
Annex.Branch.get, it trusted the journal was cosnsitent, and returned it,
again w/o merging from origin/git-annex. This latter behavior is the
actual bug.
Refer to commit e9bfa8eaed for the thinking
behind it being ok to make a change to a file on the branch, without
first merging the branch. That thinking still stands. However, it means
that files in the journal cannot be trusted to be consistent if the branch
has not been merged. So, to fix, just enure the branch gets merged, even
when reading from the journal.
In tests, this does not seem to cause any extra merging. Except, of course,
in the one case described above. But git annex add, etc, are able to make
changes w/o first merging the branch.
The bug was in movein, which just replaceFile'd the file with a symlink,
even if it already had the desired content, before trying to pull the
content out of the annex and replace the symlink with it.
That was ok-ish for non conflicted merges, where if the file existed it would
be an old version of the content. But for conflicted merges, the automatic
merge resolver has already run, and will have already put the desired
content into the file for the local variant.
Also, made removeDirect not trust that the associated files map is correct.
Only if it can verify that another file has the content will it not move it
into .git/annex/objects.
As seen in this bug report, the lifted exception handling using the StateT
monad throws away state changes when an action throws an exception.
http://git-annex.branchable.com/bugs/git_annex_fork_bombs_on_gpg_file/
.. Which can result in cached values being redundantly calculated, or other
possibly worse bugs when the annex state gets out of sync with reality.
This switches from a StateT AnnexState to a ReaderT (MVar AnnexState).
All changes to the state go via the MVar. So when an Annex action is
running inside an exception handler, and it makes some changes, they
immediately go into affect in the MVar. If it then throws an exception
(or even crashes its thread!), the state changes are still in effect.
The MonadCatchIO-transformers change is actually only incidental.
I could have kept on using lifted-base for the exception handling.
However, I'd have needed to write a new instance of MonadBaseControl
for the new monad.. and I didn't write the old instance.. I begged Bas
and he kindly sent it to me. Happily, MonadCatchIO-transformers is
able to derive a MonadCatchIO instance for my monad.
This is a deep level change. It passes the test suite! What could it break?
Well.. The most likely breakage would be to code that runs an Annex action
in an exception handler, and *wants* state changes to be thrown away.
Perhaps the state changes leaves the state inconsistent, or wrong. Since
there are relatively few places in git-annex that catch exceptions in the
Annex monad, and the AnnexState is generally just used to cache calculated
data, this is unlikely to be a problem.
Oh yeah, this change also makes Assistant.Types.ThreadedMonad a bit
redundant. It's now entirely possible to run concurrent Annex actions in
different threads, all sharing access to the same state! The ThreadedMonad
just adds some extra work on top of that, with its own MVar, and avoids
such actions possibly stepping on one-another's toes. I have not gotten
rid of it, but might try that later. Being able to run concurrent Annex
actions would simplify parts of the Assistant code.
Before, if a direct mode repo had one or more associated files that
were modifed, moving the object into it would overwrite the associated
files with the pristine object.
Now, modified associated files are left unchanged. To ensure that,
when an object is moved into a direct mode repo, it's not thrown away,
it gets stored in indirect mode.
This fixes a bug with git annex add in direct mode. If some files already
existed in the tree pointing at the same key as a file that was just added,
and their content was not present, add neglected to copy the content to
those files.
I also changed the behavior of moveAnnex slightly: When content is moved
into the annex in direct mode, it does not overwrite any content already
present in direct mode files. That content may be modified after all.
On Windows with Cygwin, checking out a git-annex repo will create symlinks
on disk, so we need to always try to read the symlink, even when
core.symlinks says they're not supported.
Seems that Windows doesn't allow deleting a file that the same process has open.
Here the inode cache file was read and a the value from it gets used later.
But due to laziness, the old file is still open when it gets deleted. Adding
strictness avoids this problem. Of course, the file is small, so it's no
problem to read it all strictly, so this is probably an improvement even
outside of Windows.
That's needed in files used to build the configure program.
For the other files, I'm keeping my __WINDOWS__ define, as I find that much easier to type.
I may search and replace it to use the mingw32_HOST_OS thing later.
It's possible for files in indirect mode to have a direct mode mapping
file. Probably from when they were in direct mode. In this case,
toDirectGen tried to copy the content from the direct mode file that the
mapping said had it. But, being in indirect mode, it didn't really have the
content. So it did nothing. This fix makes it always move the content from
.git/annex/objects/ when it's there.
I don't know why, but I can't seem to set the environment variables inside
git-annex to work around the git error caused by android's crappy username
and hostname settings. This workaround works, and that's all that's good
about it.
Git fails on Android, because it gets some weird domain for local host like
"localhost.(none)". This works around that. I made it always set EMAIL when
GECOS workaround was needed (unless EMAIL is already set). It might be
nicer to try to get the hostname.domain as git does, and only set it if
that fails. But I don't want to be stuck trying to exactly duplicate
whatever git is doing.
A content directory can be frozen in direct mode. One way this can happen
is if the content is transferred before direct mode has a mapping for it,
so it's stored in the content directory.
So, we need to thaw the content directory before doing things with it.
The root of the problem is that toInodeCache sees a non-symlink, and so
goes on and generates a new inode cache for the dummy symlink.
Any place that toInodeCache, or sameFileStatus, or genInodeCache are called
may need to deal with this case. Although many of them are ok. For example,
prepSendAnnex calls sameInodeCache, which calls genInodeCache.. but if
the file content is not present, the InodeCache generated for its standin
file is appropriately not the same, and so it returns Nothing.
I've audited some, but have to say I'm not happy with this; it should be
handled at the type level somehow, or a toInodeCache wrapper be used that
is aware of dummy symlinks.
(The Watcher already dealt with it, via the guardSymlinkStandin function.)
Introduced a new per-remote option 'annex-rsync-transport' to specify
the remote shell that it to be used with rsync. In case the value is
'ssh', connections are cached unless 'sshcaching' is unset.
This looks at the string one char at a time, which is hardly efficient..
but more than good enough for expanding variables in
relatively short command lines.
Fixed by storing a list of cached inodes for a key, instead of just one.
Backwards compatability note: An old git-annex version will fail to parse
an inode cache file that has been written by a new version, and has
multiple items. It will succees if just one. So old git-annexes will have
even worse behavior when there are duplicated files, if that is possible.
I don't think it will be a problem. (Famous last words.)
Also, note that it doesn't expire old and unused inode caches for a key.
It would be possible to add this if needed; just look through the
associated files for a key and if there are more cached inodes, throw out
any not corresponding to associated files. Unless a file is being copied
repeatedly and the old copy deleted, this lack of expiry should not be a
problem.
* since this is a crippled filesystem anyway, git-annex doesn't use
symlinks on it
* so there's no reason to use the mixed case hash directories that we're
stuck using to avoid breaking everyone's symlinks to the content
* so we can do what is already done for all bare repos, and make non-bare
repos on crippled filesystems use the all-lower case hash directories
* which are, happily, all 3 letters long, so they cannot conflict with
mixed case hash directories
* so I was able to 100% fix this and even resuming `git annex add` in the
test case will recover and it will all just work.
This avoids commit churn by the assistant when eg,
replacing a file with a symlink.
But, just as importantly, it prevents the working tree being left with a
deleted file if git-annex, or perhaps the whole system, crashes at the
wrong time.
(It also probably avoids confusing displays in file managers.)
I would have sort of liked to put this in .gitattributes, but it seems
it does not support multi-word attribute values. Also, making this a single
config setting makes it easy to only parse the expression once.
A natural next step would be to make the assistant `git add` files that
are not annex.largefiles. OTOH, I don't think `git annex add` should
`git add` such files, because git-annex command line tools are
not in the business of wrapping git command line tools.
There are two types of equality here, and which one is right varies,
so this forces me to consider and choose between them.
Based on this, I learned that the commit in git anex sync was
always doing a strong comparison, even when in a repository where
the inodes had changed. Fixed that.
This fixes the issue mentioned in the last commit.
Turns out just collecting UUID of clients behind a XMPP remote is
insufficient (although I should probably still do it for other reasons),
because a single remote repo might be connected via both XMPP and local
pairing. So a way is needed to know when a push was received from any
client using a given XMPP remote over XMPP, as opposed to via ssh.
Make manualPull send push requests over XMPP.
When reconnecting with remotes, those that are XMPP remotes cannot
immediately be pulled from and scanned, so instead maintain a set of
(probably) desynced remotes, and put XMPP remotes on it. (This set could be
used in other ways later, if we can detect we're out of sync with other
types of remotes.)
The merger handles detecting when a XMPP push is received from a desynced
remote, and triggers a scan then, if they have in fact diverged.
This has one known bug: A single XMPP remote can have multiple clients
behind it. When this happens, only the UUID of one client is recorded
as the UUID of the XMPP remote. Pushes from the other XMPP clients will not
trigger a scan. If the client whose UUID is expected responds to the push
request, it'll work, but when that client is offline, we're SOL.
Pass subcommand as a regular param, which allows passing git parameters
like -c before it. This was already done in the pipeing set of functions,
but not the command running set.
The only thing lost is ./ghci
Speed: make fast used to take 20 seconds here, when rebuilding from
touching Command/Unused.hs. With cabal, it's 29 seconds.
This resulted in a lot of user complains that git annex init had git
telling them they needed to run git config --global user.email .. which
didn't work because even HOME was not passed into git.
Refactored annex link code into nice clean new library.
Audited and dealt with calls to createSymbolicLink.
Remaining calls are all safe, because:
Annex/Link.hs: ( liftIO $ createSymbolicLink linktarget file
only when core.symlinks=true
Assistant/WebApp/Configurators/Local.hs: createSymbolicLink link link
test if symlinks can be made
Command/Fix.hs: liftIO $ createSymbolicLink link file
command only works in indirect mode
Command/FromKey.hs: liftIO $ createSymbolicLink link file
command only works in indirect mode
Command/Indirect.hs: liftIO $ createSymbolicLink l f
refuses to run if core.symlinks=false
Init.hs: createSymbolicLink f f2
test if symlinks can be made
Remote/Directory.hs: go [file] = catchBoolIO $ createSymbolicLink file f >> return True
fast key linking; catches failure to make symlink and falls back to copy
Remote/Git.hs: liftIO $ catchBoolIO $ createSymbolicLink loc file >> return True
ditto
Upgrade/V1.hs: liftIO $ createSymbolicLink link f
v1 repos could not be on a filesystem w/o symlinks
Audited and dealt with calls to readSymbolicLink.
Remaining calls are all safe, because:
Annex/Link.hs: ( liftIO $ catchMaybeIO $ readSymbolicLink file
only when core.symlinks=true
Assistant/Threads/Watcher.hs: ifM ((==) (Just link) <$> liftIO (catchMaybeIO $ readSymbolicLink file))
code that fixes real symlinks when inotify sees them
It's ok to not fix psdueo-symlinks.
Assistant/Threads/Watcher.hs: mlink <- liftIO (catchMaybeIO $ readSymbolicLink file)
ditto
Command/Fix.hs: stopUnless ((/=) (Just link) <$> liftIO (catchMaybeIO $ readSymbolicLink file)) $ do
command only works in indirect mode
Upgrade/V1.hs: getsymlink = takeFileName <$> readSymbolicLink file
v1 repos could not be on a filesystem w/o symlinks
Audited and dealt with calls to isSymbolicLink.
(Typically used with getSymbolicLinkStatus, but that is just used because
getFileStatus is not as robust; it also works on pseudolinks.)
Remaining calls are all safe, because:
Assistant/Threads/SanityChecker.hs: | isSymbolicLink s -> addsymlink file ms
only handles staging of symlinks that were somehow not staged
(might need to be updated to support pseudolinks, but this is
only a belt-and-suspenders check anyway, and I've never seen the code run)
Command/Add.hs: if isSymbolicLink s || not (isRegularFile s)
avoids adding symlinks to the annex, so not relevant
Command/Indirect.hs: | isSymbolicLink s -> void $ flip whenAnnexed f $
only allowed on systems that support symlinks
Command/Indirect.hs: whenM (liftIO $ not . isSymbolicLink <$> getSymbolicLinkStatus f) $ do
ditto
Seek.hs:notSymlink f = liftIO $ not . isSymbolicLink <$> getSymbolicLinkStatus f
used to find unlocked files, only relevant in indirect mode
Utility/FSEvents.hs: | Files.isSymbolicLink s = runhook addSymlinkHook $ Just s
Utility/FSEvents.hs: | Files.isSymbolicLink s ->
Utility/INotify.hs: | Files.isSymbolicLink s ->
Utility/INotify.hs: checkfiletype Files.isSymbolicLink addSymlinkHook f
Utility/Kqueue.hs: | Files.isSymbolicLink s = callhook addSymlinkHook (Just s) change
all above are lower-level, not relevant
Audited and dealt with calls to isSymLink.
Remaining calls are all safe, because:
Annex/Direct.hs: | isSymLink (getmode item) =
This is looking at git diff-tree objects, not files on disk
Command/Unused.hs: | isSymLink (LsTree.mode l) = do
This is looking at git ls-tree, not file on disk
Utility/FileMode.hs:isSymLink :: FileMode -> Bool
Utility/FileMode.hs:isSymLink = checkMode symbolicLinkMode
low-level
Done!!
Now getKeysPresent checks that the key's content, not only its directory,
exists. In direct mode, the inode cache file is used as a standin for the
content.
removeAnnex always removes the inode cache file, and drop and move --from
always call removeAnnex, even if the object does not seem to be inAnnex,
to ensure it's always deleted.
This reverts commit 57780cb3a4.
This was buggy, it caused the direct mode cache to be lost when dropping
keys, so when the file is gotten back, it's stored in indirect mode.
Note to self: Do not attempt bug fixes at 6 am!
In indirect mode, now checks the inode cache to detect changes to a file.
Note that a file can still be changed if a process has it open for write,
after landing in the annex.
In direct mode, some checking of the inode cache was done before, but
from a much later point, so fewer modifications could be detected. Now it's
as good as indirect mode.
On crippled filesystems, no lock down is done before starting to add a
file, so checking the inode cache is the only protection we have.
git annex init probes for crippled filesystems, and sets direct mode, as
well as `annex.crippledfilesystem`.
Avoid manipulating permissions of files on crippled filesystems.
That would likely cause an exception to be thrown.
Very basic support in Command.Add for cripped filesystems; avoids the lock
down entirely since doing it needs both permissions and hard links.
Will make this better soon.
Been meaning to do this for some time; Android port was last straw.
Note that newer versions of the uuid library have a Data.UUID.V4 that
generates random UUIDs slightly more cleanly, but Debian has an old version
of the library, so I do it slightly round-about.
These files were left behind, and made getKeysPresent find keys that were
not present. It would be expensive to make getKeysPresent check that the
actual key files are present (it just lists the directories). But that's not
needed if we just clean up the stale cache and mapping files.
To handle systems that were in direct mode and got switched back with stale
direct mode files, made cleanObjectLoc remove all files in the key's directory.
git annex unused will still list keys that are gone but for which the stale
direct mode files exists. To deal with that, made dropunused remove the key's
directory even if the key does not seem to be present.
The most common way for a mapping to be stale is when a file was deleted,
or renamed. Nothing updates the mappings for deletions yet.
But they can also become stale in other ways. For example a file can
be modified.
So, the mapping is not trusted to be consistent. When we get a key,
only replace symlinks that still point to that key with its content.
When we drop a key, only put back symlinks for files that still have
the direct mode content.
Avoid a crash if a mapping contains files that no longer exist.
This could happen because eg, one was deleted and a commit has not yet been
done to update the mapping.
Fix path calculation.
Sometimes it seems that git-cat-file --batch stops getting info for
files in the current repo, when ":file" is fed to it. I have not reproduced
this at the command line, but only when using git annex whereis and git
annex move inside a direct mode repo. Those failed, because cat-file
returned "file missing". OTOH, git annex find works fine, despite passing
the same file to cat-file. It seems that the failing commands first asked
cat-file to show a file on the git-annex branch. Perhaps it got "stuck" on
that branch? But I cannot repoduce it running cat-file by hand. Most
strange. HEAD is a workaround for this extreme weirdness, since I spent a
good 2 hours struggling with it already.
The expensive scan uses lookupFile, but in direct mode, that doesn't work
for files that are present. So the scan was not finding things that are
present that need to be uploaded. (It did find things not present that
needed to be downloaded.)
Now lookupFile also works in direct mode. Note that it still prefers
symlinks on disk to info committed to git, in direct mode. This is
necessary to make things like Assistant.Threads.Watcher.onAddSymlink
work correctly, when given a new symlink not yet checked into git (or
replacing a file checked into git).
Now there's a Config type, that's extracted from the git config at startup.
Note that laziness means that individual config values are only looked up
and parsed on demand, and so we get implicit memoization for all of them.
So this is not only prettier and more type safe, it optimises several
places that didn't have explicit memoization before. As well as getting rid
of the ugly explicit memoization code.
Not yet done for annex.<remote>.* configuration settings.
When a file is changed in direct mode, the old content is probably lost
(at least from the local repo), and bookeeping needs to be updated to
reflect this.
Also, synthetic add events are generated at assistant startup, so
make it detect when the file has not really changed, and avoid re-adding
it.
This does add the overhead of querying the runing git cat-file for the
key that's recorded in git for the file, each time a file is added or
modified in direct mode.
However, I don't yet have a reliable way to deal with files being modified
while they're being transferred. I have code that detects it on the sending
side, but the receiver is still free to move the wrong content into its
annex, and record that it has the content. So that's not acceptable, and
I'll need to work on it some more.
However, at this point I can use a direct mode repository as a remote and
transfer files from and to it.
Also for dropping objects in direct mode.
Checking presence reliably needs a cache of mtime, size, and inode.
This way, if a file is modified, keys that point to it are no longer
present.
Also, the code for restoring the symlink when removing objects is
unnecessarily messy. calcGitLink was generating links starting with
"../../remote/.git/", when running "git annex move --from remote".
I put in a workaround, but calcGitLink should probably be fixed.
There is not yet support for getting objects from repositories in direct
mode; it still looks for content in .git/annex/objects, and there's no
once place I can change to fix that.
Also, getting objects from direct mode repositories is problematic since
the can be changed while the object is being transferred. It probably needs
to quarantine it first.
* get/copy --auto: Transfer data even if it would exceed numcopies,
when preferred content settings want it.
* drop --auto: Fix dropping content when there are no preferred content
settings.
This cache prevented noticing changes made by another process.
The case I just ran into involved the assistant dropping a file, which
cached its presence info. Then the same file was downloaded again,
but the assistant didn't know its presence info had changed.
I don't see a way to keep this cache. Will instead rely on the OS level
file cache, for files in the journal. May need to add more higher-level
caching of info that it's ok to have a potentially stale copy of,
although much of git-annex already does so.
When in a subdir, both the normal filepath, and the filepath relative to
the top of the git repo are needed for matching. The former for key lookup,
and the latter for include/exclude to match against. Previously, key lookup
didn't work in this situation.
The standalone build does not bundle its own ssh, so should be built
to support as wide an array of ssh versions as possible, so turn off
connection caching.
Unfortunatly, as implemented this forces a full rebuild when building the
standalone binary, and of course it makes it somewhat slower.
This is not ideal, but neither is probing the ssh version every time it's
run (slow), or once when initializing a repo (fragile).
Setting GIT_INDEX_FILE clobbers the rest of the environment, making git
not read ~/.gitconfig, and blow up if GECOS didn't have a name for the
user.
I'm not entirely happy with getEnvironment being run every time now,
that's somewhat expensive. It may make sense to just set GIT_COMMITTER_*
and GIT_AUTHOR_*, but I worry that clobbering the rest could break PATH,
or GIT_PATH, or something else that might be used by a command run in here.
And caching the environment is not a good idea either; it can change..
I'm using transfer for most things, both removable drives and cloud
storage, because it's the safest choice. We'll see if it makes sense
to prompt for the group when setting this up, or let the user pick
something else after the fact.
Both when queueing downloads, and uploads, consults the preferred content
settings.
I didn't make it check yet when requeing failed transfers or queuing
deferred downloads; dealing with the preferred content settings (or indeed,
other settings) changing while the assistant is running still needs work.
I'm down to 9 places in the code that can produce unwaited for zombies.
Most of these are pretty innocuous, at least for now, are only
used in short-running commands, or commands that run a set of
actions and explicitly reap zombies after each one.
The one from Annex.Branch.files could be trouble later,
since both Command.Fsck and Command.Unused can trigger it,
and the assistant will be doing those eventally. Ditto the one in
Git.LsTree.lsTree, which Command.Unused uses.
The only ones currently affecting the assistant though, are
in Git.LsFiles. Several threads use several of those.
(And yeah, using pipes or ResourceT would be a less ad-hoc approach,
but I don't really feel like ripping my entire code base apart right
now to change a foundation monad. Maybe one of these days..)
Fix resuming of downloads, which do not have a transfer info file to read.
When checking upload progress, use the MVar, rather than re-reading
the info file.
Catch exceptions in the transfer action. Required a tryAnnex.
Branch.get is not able to see changes that have been staged to the index
but not committed. This is a limitation of git cat-file --batch; when
reading from the index, as opposed to from a branch, it does not notice
changes made after the first time it reads the index.
So, had to revert the changes made in 1f73db3469
to make annex.alwayscommit=false stage changes.
Also, ensure that Branch.change and Branch.get always see changes
at all points during a commit, by not deleting journal files when
staging to the index. Delete them only after committing the branch.
Before, there was a race during commits where a different git-annex
could see out-of-date info from the branch while a commit was in progress.
That's also done when updating the branch to merge in remote branches.
In the case where the local git-annex branch has had changes pushed into it
that are not yet reflected in the index, and there are journalled changes
as well, a merge commit has to be done.
Commits used to be made to the git-annex branch whenever there were
journalled changes from a previous command, and the current command looked
up the value of a file. This no longer happens.
This means that transferkey, which is a oneshot command that stages
changes, can be run multiple times by the assistant, without each of them
committing the changes made by the command before. Which will be a lot
faster and use less space by batching up the commits.
Commits still happen if a remote git-annex branch has been changed and is
merged in.
Found a very cheap way to determine when a disconnected remote has
diverged, and has new content that needs to be transferred: Piggyback on
the git-annex branch update, which already checks for divergence.
However, this does not check if new content has appeared locally while
disconnected, that should be transferred to the remote.
Also, this does not handle cases where the two git repos are in sync,
but their content syncing has not caught up yet.
This code could have its efficiency improved:
* When multiple remotes are synced, if any one has diverged, they're
all queued for transfer scans.
* The transfer scanner could be told whether the remote has new content,
the local repo has new content, or both, and could optimise its scan
accordingly.
Make Utility.Process wrap the parts of System.Process that I use,
and add debug logging to them.
Also wrote some higher-level code that allows running an action
with handles to a processes stdin or stdout (or both), and checking
its exit status, all in a single function call.
As a bonus, the debug logging now indicates whether the process
is being run to read from it, feed it data, chat with it (writing and
reading), or just call it for its side effect.
Test suite now passes with -threaded!
I traced back all the hangs with -threaded to System.Cmd.Utils. It seems
it's just crappy/unsafe/outdated, and should not be used. System.Process
seems to be the cool new thing, so converted all the code to use it
instead.
In the process, --debug stopped printing commands it runs. I may try to
bring that back later.
Note that even SafeSystem was switched to use System.Process. Since that
was a modified version of code from System.Cmd.Utils, it needed to be
converted too. I also got rid of nearly all calls to forkProcess,
and all calls to executeFile, which I'm also doubtful about working
well with -threaded.
While I was in there, I noticed and fixed a bug in the queue size
calculations. It was never encountered only because Queue.add was
only ever run with 1 file in the list.
There's a race adding a new file to the annex: The file is moved to the
annex and replaced with a symlink, and then we git add the symlink. If
someone comes along in the meantime and replaces the symlink with
something else, such as a new large file, we add that instead. Which could
be bad..
This race is fixed by avoiding using git add, instead the symlink is
directly staged into the index.
It would be nice to make `git annex add` use this same technique.
I have not done so yet because it currently runs git update-index once per
file, which would slow does `git annex add`. A future enhancement would be
to extend the Git.Queue to include the ability to run update-index with
a list of Streamers.
This allows the queue to be used in a single process for multiple possibly
conflicting commands, like add and rm, without running them out of order.
This assumes that running the same git subcommand with different parameters
cannot itself conflict.
Baked into the code was an assumption that a repository's git directory
could be determined by adding ".git" to its work tree (or nothing for bare
repos). That fails when core.worktree, or GIT_DIR and GIT_WORK_TREE are
used to separate the two.
This was attacked at the type level, by storing the gitdir and worktree
separately, so Nothing for the worktree means a bare repo.
A complication arose because we don't learn where a repository is bare
until its configuration is read. So another Location type handles
repositories that have not had their config read yet. I am not entirely
happy with this being a Location type, rather than representing them
entirely separate from the Git type. The new code is not worse than the
old, but better types could enforce more safety.
Added support for core.worktree. Overriding it with -c isn't supported
because it's not really clear what to do if a git repo's config is read, is
not bare, and is then overridden to bare. What is the right git directory
in this case? I will worry about this if/when someone has a use case for
overriding core.worktree with -c. (See Git.Config.updateLocation)
Also removed and renamed some functions like gitDir and workTree that
misused git's terminology.
One minor regression is known: git annex add in a bare repository does not
print a nice error message, but runs git ls-files in a way that fails
earlier with a less nice error message. This is because before --work-tree
was always passed to git commands, even in a bare repo, while now it's not.
annex.ssh-options, annex.rsync-options, annex.bup-split-options.
And adjust types to avoid the bugs that broke several config settings
recently. Now "annex." prefixing is enforced at the type level.
A bit tricky to avoid printing it twice in a row when there are queued git
commands to run and journal to stage.
Added a generic way to run an action that may output multiple side
messages, with only the first displayed.
This is incomplete, it does not honor it yet for hash directories
and other annex bookkeeping files. Some of that is not needed for a bare
repo; some of it may be.
getConfig got a remote-specific config, and this confusing name caused it
to be used a couple of places that only were interested in global configs.
Rename to getRemoteConfig and make getConfig only get global configs.
There are no behavior changes here, but remote.<name>.annex-web-options
never actually worked (and per-remote web options is a very unlikely to be
useful case so I didn't make it work), so fix the documentation for it.
Don't check if configure indicated checks won't work. This should fix a
FTBFS on mipsel, where configure correctly detects the checks won't work,
while garbage is returned for disk space info at git-annex runtime. It also
means that, when built via cabal, disk space checks are not enabled,
unfortunatly.
.. Allowing it to be used by things in constant space!
Random statistics: git annex status has gone from taking 239 mb
of memory and 26 seconds in a repo, to 8 mb and 13 seconds.
The trick here is the unsafeInterleaveIO, and the form of the function's
recursion, which I cribbed heavily from System.IO.HVFS.Utils.recurseDirStat.
The difference is, this one goes to a limited depth and avoids statting
everything.
Before, it leaked space due to caching lists of keys. Now all necessary
data about keys is calculated as they stream in.
The "nearly constant" is due to getKeysPresent, which builds up a lot
of [] thunks as it traverses .git/annex/objects/. Will deal with it later.
Now changes are staged into the branch's index, but not committed,
which avoids growing a large journal. And sync and merge always
explicitly commit, ensuring that even when they do nothing else,
they commit the staged changes.
Added a flag file to indicate that the branch's journal contains
uncommitted changes. (Could use git ls-files, but don't want to run
that every time.)
In the future, this ability to have uncommitted changes staged in the
journal might be used on remotes after a series of oneshot commands.
To avoid commits of data to the git-annex branch after each command
is run, set annex.alwayscommit=false. Its data will then be committed
less frequently, when a merge or sync is done.
I was able to reproduce this on linux using the kernel's nfs server and
mounting localhost:/. Determined that removing the directory fails when
the just-deleted file in it was locked. Considered dropping the lock
before removing the directory, but this would complicate parts of the code
that should not need to worry about locking. So instead, ignore the failure
to remove the directory in this case.
While I was at it, made it attempt to remove both levels of hash
directories, in case they're empty.
useful when adding hundreds of thousands of files on a system with plenty
of memory.
git add gets quite slow in such a large repository, so if the system has
more than the ~32 mb of memory the queue can use by default, it's a useful
optimisation to increase the queue size, in order to decrease the number
of times git add is run.
The list of files had to be retained until the end so it could be deleted.
Also, a list of update-index lines was generated and only then fed into it.
Now everything streams in constant space.
When hashing the files, the entire list of shas was read strictly.
That was entirely unnecessary, since there's a cleanup action run
after they're consumed.
Now gitattributes are looked up, efficiently, in only the places that
really need them, using the same approach used for cat-file.
The old CheckAttr code seemed very fragile, in the way it streamed files
through git check-attr.
I actually found that cad8824852
was still deadlocking with ghc 7.4, at the end of adding a lot of files.
This should fix that problem, and avoid future ones.
The best part is that this removes withAttrFilesInGit and withNumCopies,
which were complicated Seek methods, as well as simplfying the types
for several other Seek methods that had a Backend tupled in.
Done by adding a oneshot mode, in which location log changes are written to
the journal, but not committed. Taking advantage of git-annex's existing
ability to recover in this situation.
This is used by git-annex-shell and other places where changes are made to
a remote's location log.
Ssh connection caching is now enabled automatically by git-annex. Only one
ssh connection is made to each host per git-annex run, which can speed some
things up a lot, as well as avoiding repeated password prompts. Concurrent
git-annex processes also share ssh connections. Cached ssh connections are
shut down when git-annex exits.
Note: The rsync special remote does not yet participate in the ssh
connection caching.
For a local git remote, can symlink the file.
For a git remote using rsync, can preseed any local content.
There are a few reasons to use fsck --from on a normal git remote.
One is if it's using gitosis or similar, and you don't have shell access
to run git annex locally. Another reason could be if you just want to
fsck certian files of a bare remote.
This way, the build log will indicate whether StatFS can be relied on.
I've tested all the failing architectures now, and on all of them,
the StatFS code now returns Nothing, rather than Just nonsense.
Also, if annex.diskreserve is set on a platform where StatFS is not
working, git-annex will complain.
Also, the Makefile was missing the sources target used when building with
cabal.
This needs to run git log on the location log files to get at all past
versions of the file, which tends to be a bit slow.
It would be possible to make a version optimised for showing the location
logs for every key. That would only need to run git log once, so would be
faster, but it would need to process an enormous amount of data, so
would not speed up the individual file case.
In the future it would be nice to support log --format. log --json also
doesn't work right yet.
Could have just used hGetContentsStrict here, but that would require
storing all the shas in memory. Since this is called at the end of a
git-annex run, it may have created a *lot* of shas, so I avoid that memory
use and stream them out like before.
Dealing with a race without using locking is exceedingly difficult and tricky.
Fully tested, I hope.
There are three places left where the branch can be updated, that are not
covered by the race recovery code. Let's prove they're all immune to the
race:
1. tryFastForwardTo checks to see if a fast-forward can be done,
and then does git-update-ref on the branch to fast-forward it.
If a push comes in before the check, then either no fast-forward
will be done (ok), or the push set the branch to a ref that can
still be fast-forwarded (also ok)
If a push comes in after the check, the git-update-ref will
undo the ref change made by the push. It's as if the push did not come
in, and the next git-push will see this, and try to re-do it.
(acceptable)
2. When creating the branch for the very first time, an empty index
is created, and a commit of it made to the branch. The commit's ref
is recorded as the current state of the index. If a push came in
during that, it will be noticed the next time a commit is made to the
branch, since the branch will have changed. (ok)
3. Creating the branch from an existing remote branch involves making
the branch, and then getting its ref, and recording that the index
reflects that ref.
If a push creates the branch first, git-branch will fail (ok).
If the branch is created and a racing push is then able to change it
(highly unlikely!) we're still ok, because it first records the ref into
the index.lck, and then updating the index. The race can cause the
index.lck to have the old branch ref, while the index has the newly pushed
branch merged into it, but that only results in an unnecessary update of
the index file later on.
