In 2013, I wrote "Cryptohash benchmarks 90 to 101% faster than external
hashers". Re-benchmarking today, I found cryptonite's sha256 consistently
outperformed coreutils by 10% for large files. Tested 10 mb, 100 mb, 1 gb
files with both sha256 and sha512. And for smaller files, the external
process startup time swamps the hash time.
Perhaps cryptonite has improved. Or it could just do better on my
current CPU Intel(R) Pentium(R) CPU 4410Y @ 1.50GHz). Anyway, even if cryptonite
is slower in some situations, seems likely it would only be marginally slower;
it's got the same class of highly optimised C code under the hood as coreutils.
The main difference between the two sha256 implementations seems to be
how much of the inner loop they unroll..
This commit was sponsored by Henrik Riomar on Patreon.
Avoids annex.largefiles inconsitency and also avoids a lot of
unneccessary calls to the clean filter when a large repo's clone
is being initialized.
This commit was supported by the NSF-funded DataLad project.
Git uses pkt-line in the pack and http protocols, and for the long-running
filter processes protocol as well.
This should be a quite efficient parser and builder since it uses
attoparsec and bytestring-builder.
This adds a dependency on attoparsec, but it's a free dependency because
eg aeson depends on attoparsec and git-annex depends on aeson.
This commit was supported by the NSF-funded DataLad project.
per Peter Simons:
Setup.hs depends on 'transformers' for versions of base
prior to 4.9.x so that Control.Monad.IO.Class can be included. Just
adding the library to 'setup-depends' fixes the build with older
compilers like GHC 7.10.3.
For use in a security boundary enforcement.
Based on https://en.wikipedia.org/wiki/Reserved_IP_addresses
Including supporting IPv4 addresses embedded in IPv6 addresses. Because
while RFC6052 3.1 says "Address translators MUST NOT translate packets
in which an address is composed of the Well-Known Prefix and a non-
global IPv4 address; they MUST drop these packets", I don't want to
trust that implementations get that right when enforcing a security
boundary.
This commit was sponsored by John Pellman on Patreon.
This is a clean way to add IP address restrictions to http-client, and
any library using it.
See https://github.com/snoyberg/http-client/issues/354#issuecomment-397830259
Some code from http-client and http-client-tls was copied in and
modified. Credited its author accordingly, and used the same MIT license.
The restrictions don't apply to http proxies. If using http proxies is a
problem, http-client already has a way to disable them.
SOCKS support is not included. As far as I can tell, http-client-tls
does not support SOCKS by default, and so git-annex never has.
The additional dependencies are free; git-annex already transitively
depended on them via http-conduit.
This commit was sponsored by Eric Drechsel on Patreon.
As long as all code imports Utility.Aeson rather than Data.Aeson,
and no Strings that may contain utf-8 characters are used for eg, object
keys via T.pack, this is guaranteed to fix the problem everywhere that
git-annex generates json.
It's kind of annoying to need to wrap ToJSON with a ToJSON', especially
since every data type that has a ToJSON instance has to be ported over.
However, that only took 50 lines of code, which is worth it to ensure full
coverage. I initially tried an alternative approach of a newtype FileEncoded,
which had to be used everywhere a String was fed into aeson, and chasing
down all the sites would have been far too hard. Did consider creating an
intentionally overlapping instance ToJSON String, and letting ghc fail
to build anything that passed in a String, but am not sure that wouldn't
pollute some library that git-annex depends on that happens to use ToJSON
String internally.
This commit was supported by the NSF-funded DataLad project.
Remote.S3 and Remote.Helper.Http both had similar code to sink a
http-conduit Response to a file; refactor out sinkResponseFile.
downloadC downloads an url to a file using http-conduit, and supports
resuming. Falls back to curl to handle urls that http-conduit does not
support. This is not used yet, but the goal is to replace download with
it.
git-annex.cabal: conduit-extra was not actually used for a long time,
remove the dep. conduit moves into the main dependency list, but since
http-conduit was already in there, and it depends on conduit, that's not
really adding a new build dep.
This commit was supported by the NSF-funded DataLad project.
git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Some blake hash varieties were not yet available in that version.
Rather than tracking exact details of what cryptonite supported when,
disable blake unless using a current cryptonite.
There are a lot of different variants and sizes, I suppose we might as well
export all the common ones.
Bump dep to cryptonite to 0.16, earlier versions lacked BLAKE2 support.
Even android has 0.16 or newer.
On Debian, Blake2bp_512 is buggy, so I have omitted it for now.
http://bugs.debian.org/892855
This commit was sponsored by andrea rota.
Make a Remote.Helper.P2P using code that was in Remote.P2P, converted to
use generic protocol runner actions.
This will allow it to be reused in Remote.Git.
This commit was sponsored by mo on Patreon.
Not yet used by git-annex, but this will allow faster transfers etc than
using individual ssh connections and rsync.
Not called git-annex-shell p2p, because git-annex p2p does something
else and I don't want two subcommands with the same name between the two
for sanity reasons.
This commit was sponsored by Øyvind Andersen Holm.
Prevent ghc and llc from running out of memory when optimising some
files.
Sean Whitton reported that doing this only in Test.hs was insufficient,
the build still OOMed by the time it got to Test.hs. He had earlier found
the build worked when these options are applied globally.
See https://ghc.haskell.org/trac/ghc/ticket/14821 for why it needs -O1;
once that's fixed it may suffice to use "GHC-Options: -O2 -optlo-O2",
although it may also be that the -O1 prevents ghc from using/leaking
as much memory.
os(arm) should match armel, armhf, armeb, and arm.
It probably also matches arm64, somewhat unfortunately since arm64
systems probably tend to have more memory. See list of arches in
https://hackage.haskell.org/package/Cabal-1.22.2.0/docs/src/Distribution-System.html
This commit was sponsored by Henrik Riomar on Patreon.
The ghc options were found by Sean Whitton; the debian arm autobuilders
need those to build w/o OOM, and it seems to involve llvm using too much
memory to optimize Test.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
The problem with combining these is that Build.Standalone etc need only
the BuildInfo, and since not built with cabal, the BuildFlags ifdefs
were causing bogus warnings.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
Chose to make this only handle files actively being downloaded, not temp
files for downloads that were interrupted or files that have been fully
downloaded.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
Fully working, including --fast/--relaxed.
Note that, while git-annex addurl --relaxed is not going to check
youtube-dl, I kept git annex importfeed --relaxed checking it.
Thinking is that, let's not break people's importfeed cron jobs, and
importfeed does not typically have to check a large number of new items,
so it's ok if it's a little bit slower when used with youtube playlist
feeds.
importfeed's behavior is also improved (?) when a feed has links in it
to non-media files. Before, those were skipped. Now, the content of the
link is downloaded. This had to be done, because trying to use
youtube-dl is slow, and if those were skipped, it would have to check
every time importfeed was run. While this behavior change may not be
desirable for some feeds, that intersperse links to web pages with
enclosures, it will be desirable for other feeds, that have
non-enclosure directy links to media files.
Remove old quvi modules.
This commit was sponsored by Øyvind Andersen Holm.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
This will be used in youtube-dl integration, to tell when a html page has
been downloaded by addurl, in which case it is worth running youtube-dl
to see if it can extract media from it.
tagsoup is an almost free dependency, because yesod depends on it.
So, this only really adds a dep when git-annex is built without the
webapp.
I'd like this to as closely as possible match how browsers decide if a
page is html or not. Unfortunately, that is fairly heuristic, in order
to support malformed html. And, we don't want to falsely detect
something as html just because it has something that looks like a html
tag embedded somewhere in it. Probably any major video hosting site is
going to be serving html documents that at least start with a <html>
tag, so requiring that or a DOCTYPE should be good enough.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Needs ghc 7.6.1, so minimum base version increased slightly. All builds
are well above this version of ghc, and debian oldstable is as well.
Code that could use lambdacase can be found by running:
git grep -B 1 'case ' | less
and searching in less for "<-"
This commit was sponsored by andrea rota.
They need unix on non-windows, for Utility.Env, which Build.Configure uses,
but cabal can't express that in a custom-setup stanza.
To avoid this problem, Utility.Env would need to be moved into
unix-compat..
Windows needs the setenv package in custom-setup, but I don't want to
pull it in on unix, which would probably break some builds and need more
work. Instead, split out setEnv to a separate module.
Quite likely, unix-compat will get a portable environment layer, and
then both modules can be removed from here.
This commit was sponsored by Øyvind Andersen Holm.
Now that windows is using unix-compat 0.5, don't need a dep on Win32
or unix in custom-setup, so the stanza can be parsed by cabal's limited
parser again.
Note that unix-compat 0.5 is needed on windows, but the cabal file
hasn't bumped it yet, since that would necessarily affect non-windows
builds. Instead, the stack-windows.yaml makes sure the right version is
pulled in.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
That version has my patches for the problems that Utility.PosixFiles
was working around, so am able to get rid of that module now.
This will later allow bringing back the custom-setup stanza in the cabal
file. It will need to depend on unix-compat 0.5 on all OS's, which I'm
not ready to do yet.
This commit was sponsored by Nick Daly on Patreon.
Get ugly reversion out of CHANGELOG.
Also, relocated the windows stack.yaml to top, and updated windows build
instructions.
This commit was sponsored by Henrik Riomar on Patreon.
This reverts commit 839ec7e26c.
Neither way is working.. The other way failed:
.stack-work\dist\5f9bc736\build\git-annex\git-annex-tmp\Assistant.o:fake:(.text+0x6bb3): undefined reference to `terminatepid'
Seems that winprocess.c is not getting linked in.
Building with stack, it failed:
`_TerminateProcess' referenced in section `.text' of .stack-work\dist\5f9bc736\build\git-annex\git-annex-tmp\Utility\WinProcess.o: defined in discarded section `.text' of C:/Users/jenkins/AppData/Local/Programs/stack/i386-windows/ghc-8.0.2/mingw/bin/../lib/gcc/i686-w64-mingw32/5.2.0/../../../../i686-w64-mingw32/lib/../lib/libkernel32.a(dacgs01154.o)
This is a reversion of 86e638567a,
to try the other way to implement it, which will hopefully avoid the problem.
This needs to include unix except on windows, but when I tried
an if (! os(windows)) cabal crashed:
'parseField' called on a non-field. This is possibly a bug in Cabal.
Cabal is able to configure w/o the custom-setup stanza, so omit it.
This reverts commit ffa81d2d7f.
Old win32-extras fails to install. I suspect toolchain breakage because
a lot of stuff is failing on the windows autobuilder.
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
New table needed to look up what filenames are used in the currently
exported tree, for reasons explained in export.mdwn.
Also, added smart constructors for ExportLocation and ExportDirectory to
make sure they contain filepaths with the right direction slashes.
And some code refactoring.
This commit was sponsored by Francois Marier on Patreon.
Went with a separate db per export remote, rather than a single export
database. Mostly because there will probably not be a lot of separate
export remotes, and it might be convenient to be able to delete a given
remote's export database.
This commit was supported by the NSF-funded DataLad project.
This will allow disabling exports for remotes that are not configured to
allow them. Also, exportSupported will be useful for the external
special remote to probe.
This commit was supported by the NSF-funded DataLad project
https://github.com/haskell/cabal/issues/4655
This means that when a module is conditionally imported via ifdef
depending on the OS or build flags, the cabal file has to mirror the
same logic there to only list the module then.
Since there are lots of OS's and lots of combinations of build flags
here, it's rather difficult to know if the cabal file has been completelty
correctly updated to match the source code.
So I am very unhappy with needing to update things in two places. I've
only tested this on linux with most build flags enables; this will
probably need significant time and testing to catch every cabal file
tweak that this change to Cabal requires. And it will be a continual
source of compile failures going forward when the code is modified and
the cabal file not also updated.
DRY DRY DRY, I repeat myself, but: DRY! Sigh..
(Also, had to remove all Build.* that are standalone programs from the
Other-Modules list, because since cabal passes those modules to ghc when
building git-annex, it complains that they use module Main. Those
modules are only used when building with the Makefile anyway, so this
change shouldn't break anything.)
This commit was sponsored by Thomas Hochstein on Patreon.
Security fix: Disallow hostname starting with a dash, which would get
passed to ssh and be treated an option. This could be used by an attacker
who provides a crafted ssh url (for eg a git remote) to execute arbitrary
code via ssh -oProxyCommand.
No CVE has yet been assigned for this hole.
The same class of security hole recently affected git itself,
CVE-2017-1000117.
Method: Identified all places where ssh is run, by git grep '"ssh"'
Converted them all to use a SshHost, if they did not already, for
specifying the hostname.
SshHost was made a data type with a smart constructor, which rejects
hostnames starting with '-'.
Note that git-annex already contains extensive use of Utility.SafeCommand,
which fixes a similar class of problem where a filename starting with a
dash gets passed to a program which treats it as an option.
This commit was sponsored by Jochen Bartl on Patreon.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
Cryptonite is faster and allocates less, and I want to get rid of
MissingH use.
Note that the new dependency on memory is free; it's a dependency of
cryptonite.
This commit was supported by the NSF-funded DataLad project.
They are handled close the same as they are by git. However, unlike git,
git-annex sometimes needs to pass the -n parameter when using these.
So, this has the potential for breaking some setup, and perhaps there ought
to be a ANNEX_USE_GIT_SSH=1 needed to use these. But I'd rather avoid that
if possible, so let's see if anyone complains.
Almost all places where "ssh" was run have been changed to support the env
vars. Anything still calling sshOptions does not support them. In
particular, rsync special remotes don't. Seems that annex-rsync-transport
already gives sufficient control there.
(Fixed in passing: Remote.Helper.Ssh.toRepo used to extract
remoteAnnexSshOptions and pass them to sshOptions, which was redundant
since sshOptions also extracts those.)
This commit was sponsored by Jeff Goeke-Smith on Patreon.
sync: When syncing with a local repository located on a crippled
filesystem, run the post-receive hook there, since it wouldn't get run
otherwise. This makes pushing to repos on FAT-formatted removable drives
update them when receive.denyCurrentBranch=updateInstead.
Made Remote.Git export onLocal, which was cleaned up to not have so many
caveats about its use.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
* Added post-recieve hook, which makes updateInstead work with direct
mode and adjusted branches.
* init: Set up the post-receive hook.
This commit was sponsored by Fernando Jimenez on Patreon.
Refactored some common code into initDb.
This only deals with the problem when creating new databases. If a repo
got bad permissions into it, it's up to the user to deal with it.
This commit was sponsored by Ole-Morten Duesund on Patreon.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
This interacts with it using stdio, which is surprisingly hard.
sendFile does not currently work, due to
https://github.com/warner/magic-wormhole/issues/108
Parsing the output to find the magic code is done as robustly as
possible, and should continue to work unless wormhole radically changes
the format of its codes. Presumably it will never output something that
looks like a wormhole code before the actual wormhole code; that would
also break this. It would be better if there was a way to make
wormhole not mix the code with other output, as requested in
https://github.com/warner/magic-wormhole/issues/104
Only exchange of files/directories is supported. To exchange messages,
https://github.com/warner/magic-wormhole/issues/99 would need to be resolved.
I don't need message exchange however.
Added to change notification to P2P protocol.
Switched to a TBChan so that a single long-running thread can be
started, and serve perhaps intermittent requests for change
notifications, without buffering all changes in memory.
The P2P runner currently starts up a new thread each times it waits
for a change, but that should allow later reusing a thread. Although
each connection from a peer will still need a new watcher thread to run.
The dependency on stm-chans is more or less free; some stuff in yesod
uses it, so it was already indirectly pulled in when building with the
webapp.
This commit was sponsored by Francois Marier on Patreon.
Similar to GCrypt remotes, P2P remotes have an url, so Remote.Git has to
separate them out and handle them, passing off to Remote.P2P.
This commit was sponsored by Ignacio on Patreon.
Each worker thread needs to run in the Annex monad, but the
remote-daemon's liftAnnex can only run 1 action at a time. Used
Annex.Concurrent to deal with that.
P2P.Annex is incomplete as of yet.
Almost working, but there's a bug in the relaying.
Also, made tor hidden service setup pick a random port, to make it harder
to port scan.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is most of the way to having the p2p protocol working over tor
hidden services, at least enough to do git push/pull.
The free monad was split into two, one for network operations and the
other for local (Annex) operations. This will allow git-remote-tor-annex
to run only an IO action, not needing the Annex monad.
This commit was sponsored by Remy van Elst on Patreon.
For use with tor hidden services, and perhaps other transports later.
Based on Utility.SimpleProtocol, it's a line-based protocol,
interspersed with transfers of bytestrings of a specified size.
Implementation of the local and remote sides of the protocol is done
using a free monad. This lets monadic code be included here, without
tying it to any particular way to get bytes peer-to-peer.
This adds a dependency on the haskell package "free", although that
was probably pulled in transitively from other dependencies already.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
git-annex.cabal: Loosen bounds on persistent to allow 2.5, which on Debian
has been patched to work with esqueleto. This may break cabal's resolver on
non-Debian systems; if so, either use stack to build, or run cabal with
--constraint='persistent ==2.2.4.1' Hopefully this mess with esqueleto will
be resolved soon.
https://github.com/prowdsponsor/esqueleto/issues/137
I've long considered the XMPP support in git-annex a wart.
It's nice to remove it.
(This also removes the NetMessager, which was only used for XMPP, and the
daemonstatus's desynced list (likewise).)
Existing XMPP remotes should be ignored by git-annex.
This commit was sponsored by Brock Spratlen on Patreon.
Tor unfortunately does not come out of the box configured to let hidden
services register themselves on the fly via the ControlPort.
And, changing the config to enable the ControlPort and a particular type
of auth for it may break something already using the ControlPort, or
lessen the security of the system.
So, this leaves only one option to us: Add a hidden service to the
torrc. git-annex enable-tor does so, and picks an unused high port for
tor to listen on for connections to the hidden service.
It's up to the caller to somehow pick a local port to listen on
that won't be used by something else. That may be difficult to do..
This commit was sponsored by Jochen Bartl on Patreon.
This gets rid of quite a lot of ugly hacks around json generation.
I doubt that any real-world json parsers can parse incomplete objects, so
while it's not as nice to need to wait for the complete object, especially
for commands like `git annex info` that take a while, it doesn't seem worth
the added complexity.
This also causes the order of fields within the json objects to be
reordered. Since any real json parser shouldn't care, the only possible
problem would be with ad-hoc parsers of the old json output.
This makes -Jn work with --json and --quiet, where before
setting -Jn disabled those options.
Concurrent json output is currently a mess though since threads output
chunks over top of one-another.
Simplify Solver's task by requesting version 2.2.4.1 of the persistent
package instead of just providing the persistent < 2.5 constraint.
With only the persistent < 2.5 constraint, and with --flags=s3\ webapp
and --max-backjumps=10000, CI timed out after two hours with Solver
still trying to find a solution.
This is a follow-up to 18e458db, since there's been a regression in the
situation between 6.20160619 and 6.20160808, probably simply because
Hackage is a moving target.
Use nextRandom to generate the random UUID, rather than using randomIO.
This gets fixes for the following two bugs in the uuid library.
However, this did not impact git-annex much, so a hard depedency has
not been added on uuid-1.3.12.
https://github.com/aslatter/uuid/issues/15
"v4 UUIDs are not that random"
This doesn't greatly affect git-annex, because even with only
2^64 possible UUIDs, the chance that two git-annex repositories
that are clones of the same git repo get the same UUID is miniscule.
And, git-annex generates only one UUID per run, so preducting
subsequent UUIDs is not a problem.
https://github.com/aslatter/uuid/issues/16
"Remove Random instance for UUID, or mark it as deprecated"
git-annex was using that instance; let's stop before it gets
deprecated or removed.
metadata --json output format has changed, adding a inner json object
named "fields" which contains only the fields and their values.
This should be easier to parse than the old format, which mixed up
metadata fields with other keys in the json object.
Any consumers of the old format will need to be updated.
This adds a dependency on unordered-containers for parsing MetaData
from JSON, but it's a free dependency; aeson pulls in that library.
This actually runs faster than building the man pages from the makefile
did. But the main purpose is to let Setup.hs import Build.Mans and so not
need the makefile.
The tarball on hackage will include only the files needed for cabal install;
it is NOT the full git-annex source tree. While it's totally obnoxious that
cabal files need every file listed out when basic wildcard support could
avoid hundreds of lines, and have to be maintained when files are added,
this does get the tarball size back down to 1 mb.
This also stops stack from complaining that it found modules not listed in
the cabal file.
debian/changelog, debian/NEWS, debian/copyright: Converted to symlinks
to CHANGELOG, NEWS, and COPYRIGHT, which used to symlink to these instead.
This avoids needing to include debian/ in the hackage tarball.
Setup.hs: Build man pages at install time using make and mdwn2man.
If it fails, which it probably will on windows, just skip installing
them.
According to https://github.com/redneb/disk-free-space/issues/3 ,
disk-free-space should be at least as portable as my homegrown code was.
One change I noticed is, getDiskSize was not implemented for windows
in the old code, and should work now.
* Removed the webapp-secure build flag, rolling it into the webapp build
flag.
* Removed the quvi and tahoe build flags, which only adds aeson to
the core dependencies.
* Removed the feed build flag, which only adds feed to the core
dependencies.
Build flags have cost in both code complexity and also make Setup configure
have to work harder to find a usable set of build flags when some
dependencies are missing.
The benchmark shows that the database access is quite fast indeed!
And, it scales linearly to the number of keys, with one exception,
getAssociatedKey.
Based on this benchmark, I don't think I need worry about optimising
for cases where all files are locked and the database is mostly empty.
In those cases, database access will be misses, and according to this
benchmark, should add only 50 milliseconds to runtime.
(NB: There may be some overhead to getting the database opened and locking
the handle that this benchmark doesn't see.)
joey@darkstar:~/src/git-annex>./git-annex benchmark
setting up database with 1000
setting up database with 10000
benchmarking keys database/getAssociatedFiles from 1000 (hit)
time 62.77 μs (62.70 μs .. 62.85 μs)
1.000 R² (1.000 R² .. 1.000 R²)
mean 62.81 μs (62.76 μs .. 62.88 μs)
std dev 201.6 ns (157.5 ns .. 259.5 ns)
benchmarking keys database/getAssociatedFiles from 1000 (miss)
time 50.02 μs (49.97 μs .. 50.07 μs)
1.000 R² (1.000 R² .. 1.000 R²)
mean 50.09 μs (50.04 μs .. 50.17 μs)
std dev 206.7 ns (133.8 ns .. 295.3 ns)
benchmarking keys database/getAssociatedKey from 1000 (hit)
time 211.2 μs (210.5 μs .. 212.3 μs)
1.000 R² (0.999 R² .. 1.000 R²)
mean 211.0 μs (210.7 μs .. 212.0 μs)
std dev 1.685 μs (334.4 ns .. 3.517 μs)
benchmarking keys database/getAssociatedKey from 1000 (miss)
time 173.5 μs (172.7 μs .. 174.2 μs)
1.000 R² (0.999 R² .. 1.000 R²)
mean 173.7 μs (173.0 μs .. 175.5 μs)
std dev 3.833 μs (1.858 μs .. 6.617 μs)
variance introduced by outliers: 16% (moderately inflated)
benchmarking keys database/getAssociatedFiles from 10000 (hit)
time 64.01 μs (63.84 μs .. 64.18 μs)
1.000 R² (1.000 R² .. 1.000 R²)
mean 64.85 μs (64.34 μs .. 66.02 μs)
std dev 2.433 μs (547.6 ns .. 4.652 μs)
variance introduced by outliers: 40% (moderately inflated)
benchmarking keys database/getAssociatedFiles from 10000 (miss)
time 50.33 μs (50.28 μs .. 50.39 μs)
1.000 R² (1.000 R² .. 1.000 R²)
mean 50.32 μs (50.26 μs .. 50.38 μs)
std dev 202.7 ns (167.6 ns .. 252.0 ns)
benchmarking keys database/getAssociatedKey from 10000 (hit)
time 1.142 ms (1.139 ms .. 1.146 ms)
1.000 R² (1.000 R² .. 1.000 R²)
mean 1.142 ms (1.140 ms .. 1.144 ms)
std dev 7.142 μs (4.994 μs .. 10.98 μs)
benchmarking keys database/getAssociatedKey from 10000 (miss)
time 1.094 ms (1.092 ms .. 1.096 ms)
1.000 R² (1.000 R² .. 1.000 R²)
mean 1.095 ms (1.095 ms .. 1.097 ms)
std dev 4.277 μs (2.591 μs .. 7.228 μs)
Make these features solely dependent on the OS being built on.
This lets stack build on windows w/o XMPP, on OSX w/o DBUS,
and on Linux with everything.
It was failing at link time, some problem with terminatePID.
Re-implemented that to not use a C wrapper function, which cleared up the
problem. Removed old EvilLinker hack with must have been related to the
same problem.
Note that I have not tested this with older ghc's. In
f11f7520b5 I mention having tried this
approach before, and getting segfaults.. So, who knows. It seems to work
fine with ghc 7.10 at least.
While cryptohash has SHA3 support, it has not been updated for the final
version of the spec. Note that cryptonite has not been ported to all arches
that cryptohash builds on yet.
This caused problems building with stackage and ghc 7.6, since cabal
assumes the flag means it wants a newer time. Since time is bundled with
ghc, stackage doesn't pin it.
Since this flag was only there to avoid a dep on old-locale, which is
currently bundled with ghc, let's remove the flag.
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
This reverts commit cf650eaa99.
It's too early to do this; the linux and android autobuilder will need to
be updated to use the new version of shakespeare, and that will require a
complete refresh of them. In the meantime, this has knocked the webapp out
of the autobuilders.
This is a nearly free feature; it piggybacks on the location log lookups
done for the numcopies stats. So, the only extra overhead is updating
the map of repository sizes.
However, I had to switch to Data.Map.Strict, which needs containers 0.5.
If backporting to wheezy, will probably need to revert this commit.
Did not keep backwards compat for sticky bit records. An incremental fsck
that is already in progress will start over on upgrade to this version.
This is not yet ready for merging. The autobuilders need to have sqlite
installed.
Also, interrupting a fsck --incremental does not commit the database.
So, resuming with fsck --more restarts from beginning.
Memory: Constant during a fsck of tens of thousands of files.
(But, it does seem to buffer whole transation in memory, so
may really scale with number of files.)
CPU: ?
