Came up with a generic way to filter out progress messages while keeping
errors, for commands that use stderr for both.
--json mode will disable command outputs too.
Now `git annex info $remote` shows info specific to the type of the remote,
for example, it shows the rsync url.
Remote types that support encryption or chunking also include that in their
info.
This commit was sponsored by Ævar Arnfjörð Bjarmason.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
encryptionSetup must be called before setRemoteCredPair. Otherwise,
the RemoteConfig doesn't have the cipher in it, and so no cipher is used to
encrypt the embedded creds.
This is a security fix for non-shared encryption methods!
For encryption=shared, there's no security problem, just an
inconsistentency in whether the embedded creds are encrypted.
This is very important to get right, so used some types to help ensure that
setRemoteCredPair is only run after encryptionSetup. Note that the external
special remote bypasses the type safety, since creds can be set after the
initial remote config, if the external special remote program requests it.
Also note that IA remotes never use encryption, so encryptionSetup is not
run for them at all, and again the type safety is bypassed.
This leaves two open questions:
1. What to do about S3 and glacier remotes that were set up
using encryption=pubkey/hybrid with embedcreds?
Such a git repo has a security hole embedded in it, and this needs to be
communicated to the user. Is the changelog enough?
2. enableremote won't work in such a repo, because git-annex will
try to decrypt the embedded creds, which are not encrypted, so fails.
This needs to be dealt with, especially for ecryption=shared repos,
which are not really broken, just inconsistently configured.
Noticing that problem for encryption=shared is what led to commit
fbdeeeed5f, which tried to
fix the problem by not decrypting the embedded creds.
This commit was sponsored by Josh Taylor.
Added a mkUnavailable method, which a Remote can use to generate a version
of itself that is not available. Implemented for several, but not yet all
remotes.
This allows testing that checkPresent properly throws an exceptions when
it cannot check if a key is present or not. It also allows testing that the
other methods don't throw exceptions in these circumstances.
This immediately found several bugs, which this commit also fixes!
* git remotes using ssh accidentially had checkPresent return
an exception, rather than throwing it
* The chunking code accidentially returned False rather than
propigating an exception when there were no chunks and
checkPresent threw an exception for the non-chunked key.
This commit was sponsored by Carlo Matteo Capocasa.
This will allow special remotes to eg, open a http connection and reuse it,
while checking if chunks are present, or removing chunks.
S3 and WebDAV both need this to support chunks with reasonable speed.
Note that a special remote might want to cache a http connection across
multiple requests. A simple case of this is that CheckPresent is typically
called before Store or Remove. A remote using this interface can certianly
use a Preparer that eg, uses a MVar to cache a http connection.
However, it's up to the remote to then deal with things like stale or
stalled http connections when eg, doing a series of downloads from a remote
and other places. There could be long delays between calls to a remote,
which could lead to eg, http connection stalls; the machine might even
move to a new network, etc.
It might be nice to improve this interface later to allow
the simple case without needing to handle the full complex case.
One way to do it would be to have a `Transaction SpecialRemote cache`,
where SpecialRemote contains methods for Storer, Retriever, Remover, and
CheckPresent, that all expect to be passed a `cache`.
I tend to prefer moving toward explicit exception handling, not away from
it, but in this case, I think there are good reasons to let checkPresent
throw exceptions:
1. They can all be caught in one place (Remote.hasKey), and we know
every possible exception is caught there now, which we didn't before.
2. It simplified the code of the Remotes. I think it makes sense for
Remotes to be able to be implemented without needing to worry about
catching exceptions inside them. (Mostly.)
3. Types.StoreRetrieve.Preparer can only work on things that return a
Bool, which all the other relevant remote methods already did.
I do not see a good way to generalize that type; my previous attempts
failed miserably.
This has not been tested at all. It compiles!
The only known missing things are support for encryption, and for get/set
of special remote configuration, and of key state. (The latter needs
separate work to add a new per-key log file to store that state.)
Only thing I don't much like is that initremote needs to be passed both
type=external and externaltype=foo. It would be better to have just
type=foo
Most of this is quite straightforward code, that largely wrote itself given
the types. The only tricky parts were:
* Need to lock the remote when using it to eg make a request, because
in theory git-annex could have multiple threads that each try to use
a remote at the same time. I don't think that git-annex ever does
that currently, but better safe than sorry.
* Rather than starting up every external special remote program when
git-annex starts, they are started only on demand, when first used.
This will avoid slowdown, especially when running fast git-annex query
commands. Once started, they keep running until git-annex stops, currently,
which may not be ideal, but it's hard to know a better time to stop them.
* Bit of a chicken and egg problem with caching the cost of the remote,
because setting annex-cost in the git config needs the remote to already
be set up. Managed to finesse that.
This commit was sponsored by Lukas Anzinger.
I think both of these are all that's affected, but I went ahead and fixed
all the remotes that set their config to M.empty to instead store the
actual config. Who knows what will expect it to be actually present in
future, the Remote instance of getGpgEncParams came to..
Currently only implemented for local git remotes. May try to add support
to git-annex-shell for ssh remotes later. Could concevably also be
supported by some special remote, although that seems unlikely.
Cronner user this when available, and when not falls back to
fsck --fast --from remote
git annex fsck --from does not itself use this interface.
To do so, I would need to pass --fast and all other options that influence
fsck on to the git annex fsck that it runs inside the remote. And that
seems like a lot of work for a result that would be no better than
cd remote; git annex fsck
This may need to be revisited if git-annex-shell gets support, since it
may be the case that the user cannot ssh to the server to run git-annex
fsck there, but can run git-annex-shell there.
This commit was sponsored by Damien Diederen.
To support this, a core.gcrypt-id is stored by git-annex inside the git
config of a local gcrypt repository, when setting it up.
That is compared with the remote's cached gcrypt-id. When different, a
drive has been changed. git-annex then looks up the remote config for
the uuid mapped from the core.gcrypt-id, and tweaks the configuration
appropriately. When there is no known config for the uuid, it will refuse to
use the remote.
This is a git-remote-gcrypt encrypted special remote. Only sending files
in to the remote works, and only for local repositories.
Most of the work so far has involved making initremote work. A particular
problem is that remote setup in this case needs to generate its own uuid,
derivied from the gcrypt-id. That required some larger changes in the code
to support.
For ssh remotes, this will probably just reuse Remote.Rsync's code, so
should be easy enough. And for downloading from a web remote, I will need
to factor out the part of Remote.Git that does that.
One particular thing that will need work is supporting hot-swapping a local
gcrypt remote. I think it needs to store the gcrypt-id in the git config of the
local remote, so that it can check it every time, and compare with the
cached annex-uuid for the remote. If there is a mismatch, it can change
both the cached annex-uuid and the gcrypt-id. That should work, and I laid
some groundwork for it by already reading the remote's config when it's
local. (Also needed for other reasons.)
This commit was sponsored by Daniel Callahan.
With the initremote parameters "encryption=pubkey keyid=788A3F4C".
/!\ Adding or removing a key has NO effect on files that have already
been copied to the remote. Hence using keyid+= and keyid-= with such
remotes should be used with care, and make little sense unless the point
is to replace a (sub-)key by another. /!\
Also, a test case has been added to ensure that the cipher and file
contents are encrypted as specified by the chosen encryption scheme.
Most remotes have meters in their implementations of retrieveKeyFile
already. Simply hooking these up to the transfer log makes that information
available. Easy peasy.
This is particularly valuable information for encrypted remotes, which
otherwise bypass the assistant's polling of temp files, and so don't have
good progress bars yet.
Still some work to do here (see progressbars.mdwn changes), but this
is entirely an improvement from the lack of progress bars for encrypted
downloads.
There was confusion in different parts of the progress bar code about
whether an update contained the total number of bytes transferred, or the
number of bytes transferred since the last update. One way this bug
showed up was progress bars that seemed to stick at zero for a long time.
In order to fix it comprehensively, I add a new BytesProcessed data type,
that is explicitly a total quantity of bytes, not a delta.
Note that this doesn't necessarily fix every problem with progress bars.
Particularly, buffering can now cause progress bars to seem to run ahead
of transfers, reaching 100% when data is still being uploaded.
Both the directory and webdav special remotes used to have to buffer
the whole file contents before it could be decrypted, as they read
from chunks. Now the chunks are streamed through gpg with no buffering.
Transfer info files are updated when the callback is called, updating
the number of bytes transferred.
Left unused p variables at every place the callback should be used.
Which is rather a lot..
Currently only the web special remote is readonly, but it'd be possible to
also have readonly drives, or other remotes. These are handled in the
assistant by only downloading from them, and never trying to upload to
them.
This commit includes a paydown on technical debt incurred two years ago,
when I didn't know that it was bad to make custom Read and Show instances
for types. As the routes need Read and Show for Transfer, which includes a
Key, and deriving my own Read instance of key was not practical,
I had to finally clean that up.
So the compact Key read and show functions are now file2key and key2file,
and Read and Show are now derived instances.
Changed all code that used the old instances, compiler checked.
(There were a few places, particularly in Command.Unused, and the test
suite where the Show instance continue to be used for legitimate
comparisons; ie show key_x == show key_y (though really in a bloom filter))
