When quvi is installed, git-annex addurl automatically uses it to detect
when an page is a video, and downloads the video file.
web special remote: Also support using quvi, for getting files,
or checking if files exist in the web.
This commit was sponsored by Mark Hepburn. Thanks!
This is a simple approach for setting up a mirroring repository.
It will work with any type of remotes.
Mirror --from is more expensive than mirror --to in general.
OTOH, mirror --from will get the file from any remote that has it, not only
the named mirror remote. And if the named mirror remote is not the fastest
available remote with a file, that can speed things up.
It would be possible to make the assistant or watch command do a more
dynamic mirroring, that didn't need to scan every time.
I spent a long time worrying about this problem with --all, that it cannot
check .gitattributes files for numcopies settings, and so would not be
entirely safe to use. The solution turns out to be simple, just don't
implement `git annex drop --all`. drop is the only command that needs to
check numcopies (move can also reduce the number of copies, but explicitly
bypasses numcopies settings).
Use cases that might need a drop --all are probably better served by using
unused and dropunused, which already work in a bare repository.
This is so git remotes on servers without git-annex installed can be used
to keep clients' git repos in sync.
This is a behavior change, but since annex-sync can be set to disable
syncing with a remote, I think it's acceptable.
Introduced a new per-remote option 'annex-rsync-transport' to specify
the remote shell that it to be used with rsync. In case the value is
'ssh', connections are cached unless 'sshcaching' is unset.
Let's make semitrusted+:1 mean that, since it cannot be expressed easily
with the current syntax (could use (semitrusted:1 or trusted:1), but that
does not scale to higher values than 2 copy, and also fails if I add more
trust levels).
Thanks to Andy for spotting this bug by just reading my blog.
I would have sort of liked to put this in .gitattributes, but it seems
it does not support multi-word attribute values. Also, making this a single
config setting makes it easy to only parse the expression once.
A natural next step would be to make the assistant `git add` files that
are not annex.largefiles. OTOH, I don't think `git annex add` should
`git add` such files, because git-annex command line tools are
not in the business of wrapping git command line tools.
I have seen some other programs do this, and think it's pretty cool. Means
you can test wherever it's deployed, as well as at build time.
My other reason for doing it is less happy. Cabal's handling of test suites
sucks, requiring duplicated info, and even when that's done, it fails to
preprocess hsc files here. Building it in avoids that and avoids having
to explicitly tell cabal to enable test suites, which would then make it
link the test executable every time, which is unnecessarily slow.
This also has the benefit that now "make fast test" does a max speed build
and tests it.
git annex init probes for crippled filesystems, and sets direct mode, as
well as `annex.crippledfilesystem`.
Avoid manipulating permissions of files on crippled filesystems.
That would likely cause an exception to be thrown.
Very basic support in Command.Add for cripped filesystems; avoids the lock
down entirely since doing it needs both permissions and hard links.
Will make this better soon.
New setting, can be used to disable autocommit of changed files by the
assistant, while it still does data syncing and other tasks.
Also wired into webapp UI
Incomplete; I need to finish parsing and saving. This will also be used
for editing transfer control expresssions.
Removed the group display from the status output, I didn't really
like that format, and vicfg can be used to see as well as edit rempository
group membership.
The default backend used when adding files to the annex is changed from
SHA256 to SHA256E, to simplify interoperability with OSX, media players,
and various programs that needlessly look at symlink targets.
To get old behavior, add a .gitattributes containing: * annex.backend=SHA256
Used by the assistant, rather than copy, this is faster because it avoids
using git ls-files, avoids checking the location log redundantly, and
runs in oneshot mode, avoiding making a commit to the git-annex branch
for every file transferred.
git annex assistant --autostart will start separate daemons in each
listed autostart repo
running the webapp outside any git-annex repo will open it on the
first listed autostart repo
getConfig got a remote-specific config, and this confusing name caused it
to be used a couple of places that only were interested in global configs.
Rename to getRemoteConfig and make getConfig only get global configs.
There are no behavior changes here, but remote.<name>.annex-web-options
never actually worked (and per-remote web options is a very unlikely to be
useful case so I didn't make it work), so fix the documentation for it.
Add tuning, docs, etc.
Not sure if status is the right place to remote size.. perhaps unused
should report the size and also warn if it sees more keys than the bloom
filter allows?
Locking is used, so that, if there are multiple git-annex processes
using a remote concurrently, the stop hook is only run by the last
process that uses it.
To avoid commits of data to the git-annex branch after each command
is run, set annex.alwayscommit=false. Its data will then be committed
less frequently, when a merge or sync is done.
useful when adding hundreds of thousands of files on a system with plenty
of memory.
git add gets quite slow in such a large repository, so if the system has
more than the ~32 mb of memory the queue can use by default, it's a useful
optimisation to increase the queue size, in order to decrease the number
of times git add is run.
Can be used to specify what file the url is added to. This can be used to
override the default filename that is used when adding an url, which is
based on the url. Or, when the file already exists, the url is recorded as
another location of the file.
Fscking a remote is now supported. It's done by retrieving
the contents of the specified files from the remote, and checking them,
so can be an expensive operation.
(Several optimisations are possible, to speed it up, of course.. This is
the slow and stupid remote fsck to start with.)
Still, if the remote is a special remote, or a git repository that you
cannot run fsck in locally, it's nice to have the ability to fsck it.
If you have any directory special remotes, now would be a good time to
fsck them, in case you were hit by the data loss bug fixed in the
previous release!
This overrides the trust.log, and is overridden by the command-line trust
parameters.
It would have been nicer to have Logs.Trust.trustMap just look up the
configuration for all remotes, but a dependency loop prevented that
(Remotes depends on Logs.Trust in several ways). So instead, look up
the configuration when building remotes, storing it in the same forcetrust
field used for the command-line trust parameters.
This needs to run git log on the location log files to get at all past
versions of the file, which tends to be a bit slow.
It would be possible to make a version optimised for showing the location
logs for every key. That would only need to run git log once, so would be
faster, but it would need to process an enormous amount of data, so
would not speed up the individual file case.
In the future it would be nice to support log --format. log --json also
doesn't work right yet.
Dotfiles, and files inside dotdirs are not added by "git annex add" unless
the dotfile or directory is explicitly listed. So "git annex add ." will
add all untracked files in the current directory except for those in
dotdirs.
One reason for this is that it will make git-annex more usable with vcsh,
where you don't want "vcsh big annex add" to check in all the dotfiles
that are already versioned in other repositories.
(If you're using vcsh for repos that contain non-dotfiles, this won't help,
and you'll need to .gitignore such things, but this will cover the common
case.)
A more general reason why this seems like a good idea is the same reason ls
ignores dotfiles, just the unix convention that they are cruft that is kept
out of the way most of the time.
All the other git-annex commands still do deal with any dotfiles that do
get into the annex. This seemed right because if I've gone to the trouble
to add a dotfile, I will want "git annex get ." to get it along with
everything else.
It would be nice if command-specific options were supported. The first
difficulty is that which command is being called is not known until after
getopt; but that could be worked around by finding the first non-dashed
parameter. Storing the settings without putting them in the annex monad is
the next difficulty; it could perhaps be handled by making the seek stage
pass applicable settings into the start stage (and from there on to perform
as needed). But that still leaves a problem, what data type to use to
represent the options between getopt and seek?
Using Sets is the right thing; they have constant size lookup like my
SizeList, and logn insertation, which beats nub to death.
Runs faster than --fast mode did before, and gives accurate counts.
13 seconds total runtime with a warm cache in a repository with 40 thousand
keys.
find: Rather than only showing files whose contents are present, when used
with --exclude --copies or --in, displays all files that match the
specified conditions.
Note that this is a behavior change for find --exclude! Old behavior
can be gotten with find --in . --exclude=...
get, drop: Added --auto option, which decides whether to get/drop content
as needed to work toward the configured numcopies.
The problem with bundling it up in optimize was that I then found I wanted
to run an optmize that did not drop files, only got them. Considered adding
a --only-get switch to it, but that seemed wrong. Instead, let's make
existing subcommands optionally smarter.
Note that the only actual difference between drop and drop --auto is that
the latter does not even try to drop a file if it knows of not enough
copies, and does not print any error messages about files it was unable to
drop.
It might be nice to make get avoid asking git for attributes when not in
auto mode. For now it always asks for attributes.
This includes a generic JSONStream library built on top of Text.JSON
(somewhat hackishly).
It would be possible to stream out a single json document describing
all actions, but it's probably better for consumers if they can expect
one json document per line, so I did it that way instead.
Output from external programs used for transferring files is not
currently hidden when outputting json, which probably makes it not very
useful there. This may be dealt with if there is demand for json
output for --get or --move to be parsable.
The version, status, and find subcommands have hand-crafted output and
don't do json. The whereis subcommand needs to be modified to produce
useful json.
Backends are now only used to generate keys (and check them); they
are not arbitrary key-value stores for data, because it turned out such
a store is better modeled as a special remote. Updated docs to not
imply backends do more than they do now.
Sometimes I'm tempted to rename "backend" to "keytype" or something,
which would really be more clear. But it would be an annoying transition
for users, with annex.backends etc.
The tricky part about this is that to generate a key, the file must be
present already. Worked around by adding (back) an URL key type, which
is used for addurl --fast.
This allows eg, `git-annex -c annex.rsync-options=-6 get file`
The overridden git configs are not passed on to git plumbing commands
that are run. Perhaps someone will find a need to do that, but I don't yet
and it would require storing more state to know what config settings
have been overridden and need to be passed on.
get not honoring --from has surprised me a few times, so least surprise
suggests it should just behave like copy --from. This leaves the difference
between get and copy being that copy always requires the remote to copy
from, while get will decide whether to get a file from a key/value store or
a remote.
This takes advantage of the debug logging done by missingh, and I added
my own debug messages for executeFile calls. There are still some other
low-level ways git-annex runs stuff that are not shown by debugging,
but this gets most of it easily.
Add --fast flag, that can enable less expensive, but also less thurough versions of some commands.
* Add --fast flag, that can enable less expensive, but also less thurough
versions of some commands.
* fsck: In fast mode, avoid checking checksums.
* unused: In fast mode, just show all existing temp files as unused,
and avoid expensive scan for other unused content.
Still todo:
- add repos from uuid.log that were not directly found
- group repos into their respective hosts
- display inaccessible repos and broken remote connections in red
- anonymize the url display somewhat, so the maps can be shared
- use uuid info to tell when two apparently different repos are actually
the same repo accessed in different ways
* Improved temp file handling. Transfers of content can now be resumed
from temp files later; the resume does not have to be the immediate
next git-annex run.
* unused: Include partially transferred content in the list.
Moved away from a map of flags to storing config directly in the AnnexState
structure. Got rid of most accessor functions in Annex.
This allowed supporting multiple --exclude flags.
* fsck: Check if annex.numcopies is satisfied.
* fsck: Verify the sha1 of files when the SHA1 backend is used.
* fsck: Verify the size of files when the WORM backend is used.
* fsck: Allow specifying individual files to fsk if fscking everything
is not desired.
* fsck: Fix bug, introduced in 0.04, in detection of unused data.
