Only done in checkPresentChunks, although retrieveChunks could also do
it. Does not seem necessary though, because git-annex never retrives
content without first checking if it's present AFAICR. And really this will
only be needed when using fsck. Puttting it here, rather than in fsck
avoids breaking an abstraction boundary, and is nice and inexpensive.
When a special remote has chunking enabled, but no chunk sizes are
recorded (or the recorded ones are not found), speculatively try chunks
using the configured chunk size.
This makes eg, git-annex fsck --from remote be able to fix up the
location log of a file that the git-annex branch does not indicate is
stored on the remote.
Note that fsck does *not* fix up the chunk log to indicate the chunk
size. So, changing the chunk config of the remote after that will still
prevent accessing the chunks stored on it. Maybe fsck should, but I
wanted to start with this and see if it's needed.
When I put in Haskell98 this spring, I was under the mistaken
apprehension that ghc defaulted to that. But it actually its default
is a third mode, which is closer to Haskell2010 but with some differences.
The manual says "By default, GHC mainly aims to behave (mostly) like a
Haskell 2010 compiler"
Fixed two cases where the Haskell98 do indentation flexability let
wrongly indented code build. That is one of the places where
ghc does not behave like Haskell2010 by default.
The other place that I think I was concerned about, is GHC manual
section 19.1.1.3. Expressions and patterns. But that only seems to
affect code using bottoms, so would only affect pure functions throwing
an error, which I don't think git-annex does in many places as it's
pretty horrid style. And it would only affect rare cases like shown in
that section. If it did happen, it would mean that the error was not
thrown before specifying Haskell98, and then was. Haskell2010 behaves
the same as Haskell98.
This commit was sponsored by Denis Dzyubenko on Patreon.
Which lets progress be displayed when doing concurrent downloads.
Amoung other things, like --json-progress etc.
The youtube-dl output is no longer displayed, except for any errors.
This commit was sponsored by Denis Dzyubenko on Patreon.
Potentially fixes https://git-annex.branchable.com/bugs/concurrent_git-annex-copy_to_s3_special_remote_fails/
although I don't know if it does.
My thinking is, ResourceT may allocate a resource and then free it,
and a unforced thunk to that resource could result in reading memory
that has since been overwritten by something else, or in a SEGV,
depending. While that seems kind of like a bug in ResourceT to me, if it
is what's happening, this will avoid it. If it's not, this doesn't
really hurt much since the values are all smallish.
This commit was sponsored by Graham Spencer on Patreon.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
Also audited for other calls to openTempFile, and all are ok,
except for viaTmp which will need further work.
Remote.Directory fixed to set umask mode when writing to an export,
although it has another one using viaTmp that's not fixed.
Will make exports that are published via a http server running as
another user work, for example.
Remote.BitTorrent fixed to set umask mode when downloading the torrent
file. Normally this does not matter as that file does not hang around
after the download, but if a bittorrent download were started by one user,
got interrupted and then another user ran it, this will let them access
the torrent file created by the first user.
Also tested what happens if the other special remote has importtree=yes
and exporttree=yes, and in that case, download via httpalso works too,
without needing to implement any importtree methods here.
It might be possible to make it automatically set exporttree=yes if the
--sameas does. Didn't try, will probably be layering issues.
Or perhaps it should be inherited by sameas like some
other configs? But then, wouldn't it also make sense to inherit
importree=yes? But as shown here, it's not needed by this kind of
remote.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
I'm sure this used to work, but somewhere along the line something or
things (getCost and getAvailability I think, probably others)
started catching the exception and not displaying it. So, show warnings.
TVars were not updated atomically, which was ok when each thread got its
own External that was the only thing using these TVars. But, with the
async extension, several External instances can share the same var, so
it needs to be a TMVar to avoid read/write conflicts.
In particular, this makes PREPARE only be sent once.
Moving jobid generation to the git-annex side lets it be simplified a
lot.
Note that it will also be possible to generate one jobid per connection,
rather than a new job per request. That will make overflow not an issue,
and will avoid some work, and will simplify some of the code.
Receive loop looks right. Still need the send loop.
And, a complication is that some messages git-annex
sends need to be wrapped in REPLY_ASYNC, while others
do not. So will probably need to split externalSend
into two.
Idea is for ASYNC extension, it will instead contain methods that communicate
with the thread that handles all communication with the external process.
This was already prevented in other ways, but as seen in commit
c30fd24d91, those were a bit fragile.
And I'm not sure races were avoided in every case before. At least a
race between two separate git-annex processes, dropping the same
content, seemed possible.
This way, if locking fails, and the content is not present, it will
always do the right thing. Also, it avoids the overhead of an unncessary
inAnnex check for every file.
This commit was sponsored by Denis Dzyubenko on Patreon.
adb shell has sha256sum sha1sum and some others, so they could be used.
They're provided by toybox, so seem about as likely to keep
working as find and stat, which it already depends on.
Or to not add a dep, could use stat the same as getExportContentIdentifier
to get a mtime, and make a WORM key. But do I really want this to
default to WORM?
Unsure what's the best path, so punting for now.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
Trivial since git-annex cannot remove, but do an active checkKey verification
anyway, in case the data was lost somehow.
This commit was sponsored by Ryan Newton on Patreon.
Made several special remotes support locking content on them while
dropping, which allows dropping from another special remote when the
content will only remain on a special remote of these types.
In both cases, verify the content is present actively, because it's
certianly possible for things other than git-annex to have removed it.
Worth thinking about what to do if at some later point, git-lfs gains
support for dropping content, and a content locking operation.
That would probably need a transition; first would need to make lockContent
use the locking operation. Then, once enough time had passed that we can
assume any git-annex operating on the git-lfs remote had that change,
git-annex could finally allow dropping from git-lfs.
Or, it could be that git-lfs gains support for dropping content, but not
locking it. In that case, it seems this commit would need to be reverted,
and then wait long enough for that git-annex to be everywhere, and only
then can git-annex safely support dropping from git-lfs.
So, the assumption made in this commit could lead to bother later.. But I
think it's actually highly unlikely git-lfs does ever support dropping;
it's outside their centralized model. Probably. :) Worth keeping in mind as
the same assumption is made about other special remotes though.
This commit was sponsored by Ethan Aubin.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-git-lfs-dev.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Clean build under ghc 8.8.3, which seems to do better at finding cases
where two imports both provide the same symbol, and warns about one of
them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Fix bug that made creds not be stored in git when a special remote was
initialized with gpg encryption, but without an explicit embedcreds=yes.
(Yet nother regression introduced in version 7.20200202.7. 5th so far.)
This makes the creds get saved, since only things recorded there will be
saved.
IIRC, unparsedRemoteConfig was not originally available when I
implemented this; now that it is things get a bit simpler.
More could probably be simplified, is externalConfigChanges needed at
all?
This does not entirely fix the bugs though, because creds are only
embedded when embedcreds=yes, but not when encryption=pubkey is used
without embedcreds=yes.
* Improve display of problems auto-initializing or upgrading local git
remotes.
* When a local git remote cannot be initialized because it has no
git-annex branch or a .noannex file, avoid displaying a message about it.
So stop documenting it, and stop offering it as a choice in the assistant.
Removed the code that parses it into S3.ReducedRedundancy, because
S3.OtherStorageClass with the value will work just the same and avoids a
special case for a deprecated this.
Some recent changes to use mask missed that async exceptions can still
be thrown inside it. The goal is to make sure a block of cleanup code
runs entirely, w/o being interrupted by an async exception, so use
uninterruptibleMask.
Also, converted a few to bracket, which is nicer.
Since an external process can be in the middle of some operation when an
async exception is received, it has to be shut down then. Using
cleanupProcess will close its IO handles and send it a SIGTERM.
If a special remote choses to catch SIGTERM, it's fine for it to do some
cleanup then, but until it finishes, git-annex will be blocked waiting
for it. If a special remote blocked SIGTERM, it would cause a hang.
Mentioned in docs.
Also, in passing, fixed a FD leak, it was not closing the error handle
when shutting down the external. In practice that didn't matter before because
it was only run when git-annex was itself shutting down, but now that it
can run on exception, it would have been a problem.
Fixes reversion in recent conversions, the old code relied on the GC
apparently, but the new code explicitly waits on the process, so must
close stdin handle first or the command will never exit.
It was not the wrong handle. The handle was not being closed, so bup
kept running.
Before 2670890b17, the code was:
withHandle StdinHandle createProcessSuccess cmd feeder
The stdin handle was not closed by the feeder.
Testing this:
withHandle StdinHandle createProcessSuccess (proc "cat" []) (\h -> hPutStrLn h "hi")
There's a rather long pause, a couple seconds, before it completes, but
it does complete. With hClose h, it immediately completes. This must be
the GC noticing that h is out of scope and closing it.
It seems likely that the old code worked only by that accident.
So, other similar changes made in that and nearby commits may also
have this problem, and need to explicitly close handles that were
somehow implicitly closed before.
Except for the assistant, which I think may use them between threads?
Most of the uses of SomeException were already catching only async exceptions.
But I did find a few places that were accidentially catching them.
Masking ensures that EndStderrHandler gets written, so the helper
threads shut down.
However, nothing currently guarantees that calls to closeP2PSshConnection
are async exception safe, so made a note about it.
At this point, I've audited all calls to async, and made them all async
exception safe, except for ones in the assistant, and a few in leaf
commands (remotedaemon, enable-tor, multicast, p2p) which don't need to
be.
This handles all createProcessSuccess callers, and aside from process
pools, the complete conversion of all process running to async exception
safety should be complete now.
Also, was able to remove from Utility.Process the old API that I now
know was not a good idea. And proof it was bad: The code size went *down*,
despite there being a fair bit of boilerplate for some future API to
reduce.
This handles all sites where checkSuccessProcess/ignoreFailureProcess
is used, except for one: Git.Command.pipeReadLazy
That one will be significantly more work to convert to bracketing.
(Also skipped Command.Assistant.autoStart, but it does not need to
shut down the processes it started on exception because they are
git-annex assistant daemons..)
forceSuccessProcess is done, except for createProcessSuccess.
All call sites of createProcessSuccess will need to be converted
to bracketing.
(process pools still todo also)
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
Fix bug that made enableremote of S3 and webdav remotes, that have
embedcreds=yes, fail to set up the embedded creds, so accessing the remotes
failed.
(Regression introduced in version 7.20200202.7 in when reworking all the
remote configs to be parsed.)
Root problem is that parseEncryptionConfig excludes all other config keys
except encryption ones, so it is then unable to find the
credPairRemoteField. And since that field is not required to be
present, it proceeds as if it's not, rather than failing in any visible
way.
This causes it to not find any creds, and so it does not cache
them. When when the S3 remote tries to make a S3 connection, it finds no
creds, so assumes it's being used in no-creds mode, and tries to find a
public url. With no public url available, it fails, but the failure doesn't
say a lack of creds is the problem.
Fix is to provide setRemoteCredPair with a ParsedRemoteConfig, so the full
set of configs of the remote can be parsed. A bit annoying to need to
parse the remote config before the full config (as returned by
setRemoteCredPair) is available, but this avoids the problem.
I assume webdav also had the problem by inspection, but didn't try to
reproduce it with it.
Also, getRemoteCredPair used getRemoteConfigValue to get a ProposedAccepted
String, but that does not seem right. Now that it runs that code, it
crashed saying it had just a String.
Remotes that have already been enableremoted, and so lack the cached creds
file will work after this fix, because getRemoteCredPair will extract
the creds from the remote config, writing the missing file.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Finishes the transition to make remote methods throw exceptions, rather
than silently hide them.
A bit on the fence about this one, because when renameExport fails,
it falls back to deleting instead, and so does the user care why it failed?
However, it did let me clean up several places in the code.
This commit was sponsored by Ethan Aubin.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Graham Spencer on Patreon.
retrieveExport is part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
getKey very rarely fails, and when it does it's always for the same reason
(user configured annex.backend to url for some reason). So, this will
avoid dealing with Nothing everywhere it's used.
This commit was sponsored by Ilya Shlyakhter on Patreon.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
That had almost no benefit at all, and complicated things quite a lot.
What I proably wanted this to be was something like ResourceT, but it
was not. The few remotes that actually need some preparation done only
once and reused used a MVar and not Preparer.
git-lfs repos that encrypt the annexed content but not the git repo only
need --force passed to initremote, allow enableremote and autoenable of
such remotes without forcing again.
Needing --force again particularly made autoenable of such a repo not work.
And once such a repo has been set up, it seems a second --force when
enabling it elsewhere has little added value. It does tell the user about
the possibly insecure configuration, but if the git repo has already been
pushed to that remote in the clear, data has already been exposed. The goal
of that --force was not to prevent every situation where such an exposure
can happen -- anyone who sets up a public git repo and pushes to it will
expose things similarly and git-annex is not involved. Instead, the purpose
of the --force is to point out to the user that they're asking for a
configuration where encryption is inconsistently applied.
To use S3 Signature Version 4. Some S3 services seem to require v4, while
others may only support v2, which remains the default.
I'm also not sure if v4 works correctly in all cases, there is this
upstream bug report: https://github.com/aristidb/aws/issues/262
I've only tested it against the default S3 endpoint.
* Display a warning message when a remote uses a protocol, such as
git://, that git-annex does not support. Silently skipping such a
remote was confusing behavior.
It sets annex-ignore, so the warning is only displayed once.
* Also display a warning message when a remote, without a known uuid,
is located in a directory that does not currently exist, to avoid
silently skipping such a remote.
This is a bit more debatable, since git-annex get will say,
try making repository available. And since it does not set annex-ignore,
the warning will be displayed repeatedly. It's also an extreme edge case,
I don't think I've ever seen it happen in real life.
readonly=true is used to make an external special remote that does not
need the external program to be installed. It was stored in the
remote.log by default, and so every time it was specified in an
enableremote or initremote, whatever value was used became the new
default for subsequent enableremotes of that remote.
That was surprising, and I consider it to be a bug.
It does not make much sense to pass it to initremote because then how
would you populate that remote with anything? You would have to
enableremote elsewhere, and store content there. I'm assuming nobody
used it that way.
Someone might rely on passing it to enableremote once, and then that
being inherited in other clones. But that is not how it's documented to
be used. It is barely documented in git-annex at all, only in the
external special remote protocol, and the documentation there says to
"Document that this external special remote can be used in readonly
mode." (by the user of it passing readonly=true to enableremote). The
one external special remote that I know of that does document that is
<https://github.com/bgilbert/gcsannex> (the one that motivated adding
it). That one's docs do say to pass it to enableremote.
So, it seemed safe to make this behavior change. If someone was in fact
relying on one of those behaviors, all their current repos will still
work as they configured them (although they will need to deal
with the related change in 9f3c2dfeda).
In new clones, they will find enableremote fails, complaining the
external program is not in path. An easy enough problem to recover from.
get --from, move --from: When used with a local git remote, these used to
silently skip files that the location log thought were present on the
remote, when the remote actually no longer contained them. Since that
behavior could be surprising, now instead display a warning.
I got very confused when I encountered this behavior, since it was silently
skipping a file I needed that whereis said was on the remote.
get without --from already displayed a "unable to access these remotes"
message, which while a bit misleading in that the remote is likely
accessible, but just doesn't contain the file, at least indicated something
went wrong.
Having get --from display a warning makes it in line with get
w/o --from, so seems certianly ok. It might be there are situations where
move --from is used, on eg a whole directory, and the user only wants to
move whatever is present in the remote, and is perfectly ok with files
that are not present being skipped. So I'm less sure about the new warning
being ok there. OTOH, only local git remotes avoiding displaying a warning
in that case too, so this just brings them into line with other remotes.
(Also note that this makes it a little bit faster when dealing with a lot of
files, since it avoids a redundant stat of the file.)
Avoid repeatedly opening keys db when accessing a local git remote and -J
is used.
What was happening was that Remote.Git.onLocal created a new annex state
as each thread started up. The way the MVar was used did not prevent that.
And that, in turn, led to repeated opening of the keys db, as well as
probably other extra work or resource use.
Also managed to get rid of Annex.remoteannexstate, and it turned out there
was an unncessary Maybe in the keysdbhandle, since the handle starts out
closed.
A couple of these were probably actual bugs in edge cases. Most of the
changes I'm fine with. The fact that aeson's object returns sometihng
that we know will be an Object, but the type checker does not know is
kind of annoying.
Git has an obnoxious special case in git config, a line "foo" is the same
as "foo = true". That means there is no way to examine the output of
git config and tell if it was run with --null or not, since a "foo"
in the first line could be such a boolean, or could be followed by its
value on the next line if --null were used.
So, rather than trying to do such a detection, track the style of config
at all the points where it's generated.
After a user completely ignored the display of the exception probably
because it didn't make sense..
This does make it a little bit slower since it checks adb is in path each
time before running it. Also, it might display a lot of warnings about it
not being installed.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Remaining things needing converted are in the assistant, and Annex.Ssh.
Every other remaining call to createDirectoryIfMissing True has been
audited and is not relevant. The ones in Build/ of course don't get
included in the program. Others included eg, Remote.Tahoe and
Config.Files which both write to dotfiles under the home directory.
git-annex config: Only allow configs be set that are ones git-annex
actually supports reading from repo-global config, to avoid confused users
trying to set other configs with this.
* whereis: If a remote fails to report on urls where a key
is located, display a warning, rather than giving up and not displaying
any information.
* When external special remotes fail but neglect to provide an error
message, say what request failed, which is better than displaying an
empty error message to the user.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
remoteAnnexConfig will avoid bugs like
a3a674d15b
Use now more generic remoteConfig in a couple places that built
non-annex config settings manually before.
using git credential to get the password
One thing this doesn't do is wrap the password prompting inside the prompt
action. So with -J, the output can be a bit garbled.
Rather than leaking the name of the temp file, just say the config parse
failed, and where the config was downloaded from.
Not closing the bug report because two issues were reported in the same
bug report, because the universe wants me to continually re-read old
unclosed bug reports to waste my time determining what still needs to be
done.
Http remotes that do expose a git config file, but are not initialized
resulted in an ugly and unncessary error message, now sqelched.
When git-annex-shell configlist is run w/o the autoinit field, it may
not generate a uuid for the repository. So in that case, it's not
unexpected for the config it does list to not include a UUID, and
dumping out the config in a warning message is not needed.
If configlist is asked to autoinit and we don't get back a config with a
UUID in it, that suggests some problem, and what we got back may not be
a config at all but some diagnostic message, so it does make sense to
output it then.
Avoids the external program being started just to use LISTCONFIGS on an
already accepted config.
So initremote/enableremote will still run the external program an extra
time to use LISTCONFIGS, but everything that uses the special remote after
it's initialized will not any longer.
Special remote programs that use GETCONFIG/SETCONFIG are recommended
to implement it.
The description is not yet used, but will be useful later when adding a way
to make initremote list all accepted configs.
configParser now takes a RemoteConfig parameter. Normally, that's not
needed, because configParser returns a parter, it does not parse it
itself. But, it's needed to look at externaltype and work out what
external remote program to run for LISTCONFIGS.
Note that, while externalUUID is changed to a Maybe UUID, checkExportSupported
used to use NoUUID. The code that now checks for Nothing used to behave
in some undefined way if the external program made requests that
triggered it.
Also, note that in externalSetup, once it generates external,
it parses the RemoteConfig strictly. That generates a
ParsedRemoteConfig, which is thrown away. The reason it's ok to throw
that away, is that, if the strict parse succeeded, the result must be
the same as the earlier, lenient parse.
initremote of an external special remote now runs the program three
times. First for LISTCONFIGS, then EXPORTSUPPORTED, and again
LISTCONFIGS+INITREMOTE. It would not be hard to eliminate at least
one of those, and it should be possible to only run the program once.
This code worked as intended, but only by accident, because of this
instance:
instance Monoid b => Monoid (x -> b) where mempty = const (mempty :: b)
Let's be explicit that we throw away the error message.
The benefit here is that external special remotes will need a
LISTCONFIGS request and response to generate their config parser,
and this avoids it being done for all the ones that don't have any
configs.
Note that, a config parser could in theory fail to parse if there are no
configs (none currently do), but a parse failure is already thrown away
when generating the remote list because it's too late. Such problems
have to be caught at initremote/enableremote time, not here.
Not yet added anything to the protocol to get a list of remote config
fields; any fields will be accepted and are available for the external
remote to use as before.
There is one minor behavior change.. Before, GETCONFIG could be passed a
field such as type, externaltype, encryption, etc, and would get the
value of that. Now, GETCONFIG only works on fields that don't have a
defined meaning to git-annex, so are passed through to the external
remote. This seems unlikely to affect any external special remotes in
practice.
Using field functions consistently avoids possibility of typos and also
helps ensure that all fields are added to RemoteConfigParsers (as long
as I have remembered to add them when writing the functions).
Avoids parse error when the fields are added to RemoteConfig at setup
time and it then gets parsed, also at setup time. After setup time, such
internally added fields are not a problem, because they're Accepted. So
it may not be necessary in all cases to list such internally added
fields, but I think it's a good idea to always do so.
Needed so Remote.External can query the external program for its
configs. When the external program does not support the query,
the passthrough option will make all input fields be available.
Use of Typeable means the type checker can't catch this kind of mistake,
the error is deferred to runtime.
testremote now passes on a directory special remote
Remote now contains a ParsedRemoteConfig. The parsing happens when the
Remote is constructed, rather than when individual configs are used.
This is more efficient, and it lets initremote/enableremote
reject configs that have unknown fields or unparsable values.
It also allows for improved type safety, as shown in
Remote.Helper.Encryptable where things that used to match on string
configs now match on data types.
This is a work in progress, it does not build yet.
The main risk in this conversion is forgetting to add a field to
RemoteConfigParser. That will prevent using that field with
initremote/enableremote, and will prevent remotes that already are set
up from seeing that configuration. So will need to check carefully that
every field that getRemoteConfigValue is called on has been added to
RemoteConfigParser.
(One such case I need to remember is that credPairRemoteField needs to be
included in the RemoteConfigParser.)
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
annex.largefiles can be configured by git-annex config, to more easily set
a default that will also be used by clones, without needing to shoehorn the
expression into the gitattributes file. The git config and gitattributes
override that.
Whenever something is added to git-annex config, we have to consider what
happens if a user puts a purposfully bad value in there. Or, if a new
git-annex adds some new value that an old git-annex can't parse.
In this case, a global annex.largefiles that can't be parsed currently
makes an error be thrown. That might not be ideal, but the gitattribute
behaves the same, and is almost equally repo-global.
Performance notes:
git-annex add and addurl construct a matcher once
and uses it for every file, so the added time penalty for reading the global
config log is minor. If the gitattributes annex.largefiles were deprecated,
git-annex add would get around 2% faster (excluding hashing), because
looking that up for each file is not fast. So this new way of setting
it is progress toward speeding up add.
git-annex smudge does need to load the log every time. As well as checking
the git attribute. Not ideal. Setting annex.gitaddtoannex=false avoids
both overheads.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
The parser and looking up config keys in the map should both be faster
due to using ByteString.
I had hoped this would speed up startup time, but any improvement to
that was too small to measure. Seems worth keeping though.
Note that the parser breaks up the ByteString, but a config map ends up
pointing to the config as read, which is retained in memory until every
value from it is no longer used. This can change memory usage
patterns marginally, but won't affect git-annex.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
* git-lfs: The url provided to initremote/enableremote will now be
stored in the git-annex branch, allowing enableremote to be used without
an url. initremote --sameas can be used to add additional urls.
* git-lfs: When there's a git remote with an url that's known to be
used for git-lfs, automatically enable the special remote.
Reasons to do this include:
1. I've gotten pretty used to git-annex's own progress display, which is
used for all transfers over ssh (except to old git-annex-shell),
and for most special remote transfers. It's getting to seem weird to see
the rsync progress display instead.
2. When -J was used, the rsync output could not be shown, and so there was
no progress display. Now there will be.
Progress will also be displayed now when cp CoW is used. But I'd expect a CoW
copy to typically run so fast that the progress display will barely be
noticable.
This commit was sponsored by Peter on Patreon.
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
warningIO is not concurrent output safe, and it doesn't go to
--json-error-messages
There are a few more that would be too hard to remove, and there are also
several dozen direct prints to stderr still.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
This is used by a special remote with sameas-uuid=
The remote's uuid is the sameas-uuid, but it needs to get
its RemoteConfig from the annex-config-uuid.
I found a way to avoid inheritance complicating anything outside of
Logs.Remote. It seems fine to require all inherited values to be
inherited and not set in the sameas remote's config. Since inherited
values will be used for stuff like encryption and perhaps chunking, which
control the actual content stored on the remote, it seems likely that
there will not be any reason to need them to vary between two remotes
that access the same underlying data store.
The newer version of containers is free; the minimum ghc version is
bundled with a newer version than that.
Initremote sets that, so after both initremote and enableremote,
the git config will be set.
Any remote that does not use Annex.SpecialRemote won't set
annex-config-uuid. But that's only Remote.Git, which doesn't use
RemoteConfig anyway.
This avoids some extra work, but I don't think it was possible for two ssh
endpoint discoveries run concurrently to both prompt for the ssh password;
Annex.Ssh itself deals with concurrency.
This is mostly groundwork for http password prompting.
tryGitConfigRead may run ensureInitialized first, but when checkuuid = false,
that is skipped. So, make sure it's run before all onLocal actions.
ensureInitialized is inexpensive, so the extra call by tryGitConfigRead
is not a big deal. But since it was easy to do, I made it only be run
once by all calls to onLocal.
A few calls to onLocal didn't call ensureInitialized before. Notably,
the checkPresent action didn't, and does now.
That means that there's a guarantee that any necessary repo upgrades
will be run before the checkPresent action runs in the repo. Which is
important especially for the direct mode conversion, because without
that upgrade, the checkPresent action would need to support direct mode
still. Now I can remove the last bits of direct mode support in
Annex.Content without worrying that it will break accessing remotes
that have not been upgraded.
This does necessarily mean that checkPresent needs to write to the disk
when performing such a repo upgrade. The other remote actions already
did, so retrieval from a readonly remote that needed to be upgraded would
fail. Having checkPresent also fail doesn't seem like a large reversion,
especially since it already failed in the default case when checkuuid = true.
Prompted by the test suite on windows failing to with "export foo failed"
and no information about what went wrong.
Note that only storeExportWithContentIdentifier has been converted.
storeExport still returns a Bool and so exceptions may be hidden.
However, storeExportWithContentIdentifier has many more failure modes,
since it needs to avoid overwriting modified files. So it's more
important it have better error display.
The test suite was intermittently failing with rsync complaining it
could not write to dest.
get foo (from origin...)
SHA256E-s20--e394a389d787383843decc5d3d99b6d184ffa5fddeec23b911f9ee7fc8b9ea77
20 100% 0.00kB/s 0:00:00 ^M 20 100% 0.00kB/s 0:00:00 (xfr#1, to-chk=0/1)
(from origin...)
SHA256E-s20--e394a389d787383843decc5d3d99b6d184ffa5fddeec23b911f9ee7fc8b9ea77
20 100% 0.00kB/s 0:00:00 ^M 20 100% 0.00kB/s 0:00:00 (xfr#1, to-chk=0/1)
rsync: open "/home/joey/src/git-annex/.t/tmprepo1103/.git/annex/tmp/SHA256E-s20--e394a389d787383843decc5d3d99b6d184ffa5fddeec23b911f9ee7fc8b9ea77" failed: Permission denied (13)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1207) [sender=3.1.3]
It seems that the first rsync actually transferred the file, but then for some
reason git-annex thinks it failed, so it retries. The second rsync then fails
because the first rsync copied the file mode over and so the file is not
writable now.
So, this fixes that problem, but leaves open the question of why git-annex
would think rsync failed when it wrote the file and didn't output any
error message. Possibly a bug in rsyncProgress that either hides an
error message, or somehow makes rsync unhappy?
Using Logs.RemoteState for this means that if the same key gets uploaded
twice to a git-lfs remote, but somehow has different content the two
times (eg it's an URL key with non-stable content), the sha256/size of
the newer content uploaded will overwrite what was remembered before. That
seems ok; it just means that git-annex will request the newer version of
the content when downloading from git-lfs.
It will remember the sha256 and size if both are not known, or if only
the sha256 is not known but the size is known, it only remembers the
sha256, to avoid wasting space on the size. I did not add special case
for when the sha256 is known and the size is not, because it's been a
long time since git-annex created SHA256 keys without a size.
(See doc/upgrades/SHA_size.mdwn)
The protocol design allows the server to respond with some other object;
if a server for some reason a server did that, it would not be right for
git-annex to download its content. I don't think it would be a security
hole, since git-annex is downloading a specific key and will verify the
key's content. Seems like a good idea to belt-and-suspenders test for
such a misuse of the protocol.
This is a special remote and a git remote at the same time; git can pull
and push to it and git-annex can use it as a special remote.
Remote.Git has to check if it's configured as a git-lfs special remote
and sets it up as one if so.
Object methods not implemented yet.
In 40ecf58d4b I changed the license of code I
wrote from GPL to AGPL. But, two files containing code I wrote combined
with code by others were updated to say their license is AGPL, while in
fact part of it was (the code I wrote) but part remained under the original
license (the code written by others).
Remote/Ddar.hs is now changed entirely back to GPL 3.
Annex/DirHashes.hs stays AGPL, but I broke out Utility/MD5.hs with the code
not written by me, and corrected its license statement to GPL-2, which
is the actual version of the GPL included with the code in its original
distribution at http://www.cs.ox.ac.uk/people/ian.lynagh/md5/
Improved probing when CoW copies can be made between files on the same
drive. Now supports CoW between BTRFS subvolumes. And, falls back to rsync
instead of using cp when CoW won't work, eg copies between repos on the
same EXT4 filesystem.
Rather than trying cp --reflink=always for each file copied to a remote,
it's tried once and if it fails it falls back to using rsync thereafter
for the lifetime of the Remote object. That avoids overhead of calling cp
which while small, will add up over a large number of files.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
Avoid a delay at startup when concurrency is enabled and there are
rsync or gcrypt special remotes, which was caused by git-annex
opening a ssh connection to the remote too early.
sshOptions makes a connection to the ssh server if one is not already open,
when concurrency is enabled. Avoid doing that at startup, when the remote
list is being built, but the remote may not be used at all.
Instead, rsync/gcrypt now runs sshOptions once per ssh connection to the
server. This should not be significant overhead since Remote.Git already
has the same overhead (as do Bup and Ddar).
When a remote is configured to be readonly, don't allow changing what's
exported to it.
This was missed in the original export remote implementation, but it makes
sense for a readonly export remote to not be allowed to change.
* Added mimeencoding= term to annex.largefiles expressions.
This is probably mostly useful to match non-text files with eg
"mimeencoding=binary"
* git-annex matchexpression: Added --mimeencoding option.
