Caused by AMP.. Since I've finally upgraded my dev laptop to 7.10,
I may start missing imports that are not needed with it but are with older
versions..
http://bugs.debian.org/807341
* Fix insecure temporary permissions when git-annex repair is used in
in a corrupted git repository.
Other calls to withTmpDir didn't leak any potentially private data,
but repair clones the git repository to a temp directory which is made
using the user's umask. Thus, it might expose a git repo that is
otherwise locked down.
* Fix potential denial of service attack when creating temp dirs.
Since withTmpDir used easily predictable temporary directory names,
an attacker could create foo.0, foo.1, etc and as long as it managed to
keep ahead of it, could prevent it from ever returning.
I'd rate this as a low utility DOS attack. Most attackers in a position
to do this could just fill up the disk /tmp is on to prevent anything
from writing temp files. And few parts of git-annex use withTmpDir
anyway, so DOS potential is quite low.
Examined all callers of withTmpDir and satisfied myself that
switching to mkdtmp and so getting a mode 700 temp dir wouldn't break any
of them.
Note that withTmpDirIn continues to not force temp dir to 700.
But it's only used for temp directories inside .git/annex/wherever/
so that is not a problem.
Also re-audited all other uses of temp files and dirs in git-annex.
The Keys database can hold multiple inode caches for a given key. One for
the annex object, and one for each pointer file, which may not be hard
linked to it.
Inode caches for a key are recorded when its content is added to the annex,
but only if it has known pointer files. This is to avoid the overhead of
maintaining the database when not needed.
When the smudge filter outputs a file's content, the inode cache is not
updated, because git's smudge interface doesn't let us write the file. So,
dropping will fall back to doing an expensive verification then. Ideally,
git's interface would be improved, and then the inode cache could be
updated then too.
Had everything available, just didn't combine the progress meter with the
other places progress is sent to update it. (And to a remote repo already
did show progress.)
Most special remotes should already display progress meters with -J,
same as without it. One exception to this is the web, since it relies on
wget/curl progress display without -J. Still todo..
There's a potential race, but it's detected and just results in the other
process failing to take the side lock, so possibly retrying one second
later on. The race window is quite narrow so the extra delay is minor.
Left the side lock files mode 666 because an interruption can leave a side
lock file created by another user for a shared repository. When this
happens, the non-owning user can't delete it (+t) but can still lock it,
and so the code falls back to acting as it did before this commit.
This is less portable, since currently sidelocks rely on /dev/shm.
But, I've seen crazy lustre inconsistencies that make me not trust the
link() method at all, so what can you do.
I have a strace taken on a lustre filesystem on which link() returned 0,
but didn't actually succeed, since the file already existed.
One of the linux man pages recommended using link followed by checking like
this. I was reading it yesterday, but cannot find it now.
Fixes a recent-ish build warning on about 64 bit vs non.
This is the method used by the disk-free-space library, and I tested it to
yield the same results on even 10 tb drives on OSX -- so it's getting 64
bit values.
Also, rename lockContent to lockContentExclusive
inAnnexSafe should perhaps be eliminated, and instead use
`lockContentShared inAnnex`. However, I'm waiting on that, as there are
only 2 call sites for inAnnexSafe and it's fiddly.
On Solaris, using f_bsize provided a value that is apparently much larger
than the real block size. The solaris docs for statvfs say
f_bsize is the "preferred" file system block size, and I guess the
filesystem prefers larger blocks, but uses smaller ones or something.
The docs also say that f_frsize is the "fundamental" block size.
Switched to using f_frsize on Linux and kFreeBSD too, since I guess
f_bsize could in theory vary the same way there too. Assuming that Solaris
is not violating the posix spec, I guess the linux man page for statvfs
is not as well written and I misunderstood it.
This is the kind of annoying thing that makes me not want to use a library.
conduitManagerSettings was a perfectly fine name and could have been kept
forever.
Since I want git-annex to keep building on debian stable, I need to still
support the old http-client, which required explicit calls to
closeManager, or use of withManager to get Managers to close at appropriate
times. This is not needed in the new version, and so they added a
deprecation warning. IMHO much too early, because look at the mess I had to
go through to avoid that deprecation warning while supporting both
versions..
When gpg.program is configured, it's used to get the command to run for
gpg. Useful on systems that have only a gpg2 command or want to use it
instead of the gpg command.
It was failing at link time, some problem with terminatePID.
Re-implemented that to not use a C wrapper function, which cleared up the
problem. Removed old EvilLinker hack with must have been related to the
same problem.
Note that I have not tested this with older ghc's. In
f11f7520b5 I mention having tried this
approach before, and getting segfaults.. So, who knows. It seems to work
fine with ghc 7.10 at least.
This is mostly to be able to see how long a command took to run. Also exit
code may be useful.
Unofrtunately, I can't put the command name in there, because it's not
available at this point, and it would be a much larger change to wrap the
ProcessHandle data type to add that. However, it's generally pretty obvious
which process exited from context.
Since _encodeFilePath generates a String that doesn't use the filesystem
encoding, when this exception is caught, we know we already have such a
String, and can just return it as-is.
This was caused by 23e9d3bb77
an Arbitrary String is not necessarily encoded using the filesystem
encoding, and in a non-utf8 locale, encodeBS throws an exception on such a
string. All I could think to do is limit test data to ascii.
This shouldn't be a problem in practice, because the all Strings in
git-annex that are not generated by Arbitrary should be loaded in a way
that does apply the filesystem encoding.
Oh boy, not again. So, another place that the filesystem encoding needs to
be applied. Yay.
In passing, I changed decodeBS so if a NUL is embedded in the input, the
resulting FilePath doesn't get truncated at that NUL. This was needed to
make prop_b64_roundtrips pass, and on reviewing the callers of decodeBS, I
didn't see any where this wouldn't make sense. When a FilePath is used to
operate on the filesystem, it'll get truncated at a NUL anyway, whereas if
a String is being used for something else, it might conceivably have a NUL
in it, and we wouldn't want it to get truncated when going through
decodeBS.
(NB: There may be a speed impact from this change.)
While cryptohash has SHA3 support, it has not been updated for the final
version of the spec. Note that cryptonite has not been ported to all arches
that cryptohash builds on yet.
This fixes a reversion introduced by relative path changes back last winter.
The root cause is simplifyPath "../foo" was incorrectly yielding "foo".
absPathFrom seems quite horrible. Probably most things that use it should
use </> instead.
This is needed because when preferred content matches on files,
the second pass would otherwise want to drop all keys. Using a bloom filter
avoids this, and in the case of a false positive, a key will be left
undropped that preferred content would allow dropping. Chances of that
happening are a mere 1 in 1 million.
I want this as fast as possible, so it can be added to code paths without
slowing them down.
Avoid the set lookup, and rely on laziness,
drops runtime from 14.37 ns to 11.03 ns according to this criterion benchmark:
import Criterion.Main
import qualified Types.Difference as New
import qualified Types.DifferenceOld as Old
main :: IO ()
main = defaultMain
[ bgroup "hasDifference"
[ bench "new" $ whnf (New.hasDifference New.OneLevelObjectHash) new
, bench "old" $ whnf (Old.hasDifference Old.OneLevelObjectHash) old
]
]
where
s = "fromList [ObjectHashLower, OneLevelObjectHash, OneLevelBranchHash]"
new = New.readDifferences s
old = Old.readDifferences s
A little bit of added boilerplate, but I suppose it's worth it to not
need to worry about set lookup overhead. Note that adding more differences
would slow down the old implementation; the new implementation will run
the same speed.
This reverts commit ef0e3ac22e.
Sebastian thinks best to revert this:
It seems to me the reason I needed to look at activatable sockets
might actually be a networkd bug, and I was in error about patch 0001.
On my machines (without DHCP), networkd quits after configuring the
links. I thought this had to do with network activation, but that was
probably mistaken. This was obscured by my testing the change by doing
systemctl stop/start on networkd; now that I actually unplugged the
network cable, I noticed no DBus messages are triggered by this on
this machine. Your test case might have had a similar problem
(networkd quitting on idle). Might be related to [1].
On another machine (with DHCP) networkd remains active all the time,
and patch 0002 works there. You might want to revert 0001, though:
Suppose someone’s running no manager at all, so that polling would be
required. Because networkd is still listed as activable, we would
refrain from polling – by mistake, because networkd doesn’t seem to
actually go active if we listen on its bus, and it’s listed as
activable even when it’s not configured. Connectivity-related messages
will come in when stopping/starting the service, but not when
unplugging the cable.
This removes a bit of complexity, and should make things faster
(avoids tokenizing Params string), and probably involve less garbage
collection.
In a few places, it was useful to use Params to avoid needing a list,
but that is easily avoided.
Problems noticed while doing this conversion:
* Some uses of Params "oneword" which was entirely unnecessary
overhead.
* A few places that built up a list of parameters with ++
and then used Params to split it!
Test suite passes.
The content file may not be owned by the user running git-annex, in which
case, setting the owner write bit was not enough to let lockContent
act on the file. However, with some core.sharedRepository configs, the file
should be writable by the user's group. So, the thing to do is to call
thawContent on it.
Also cleaned up the code, avoiding creating a lock file if we're going to
open it for create later anyway.
And, if there's an exception while preparing to lock the file, but not at
the point of actually taking the lock, throw an exception, instead of
silently not locking and pretending to succeed.
And, on Windows, always use lock file, even if the repo somehow got into
indirect mode (maybe with cygwin git..)
The one exception is in Utility.Daemon. As long as a process only
daemonizes once, which seems reasonable, and as long as it avoids calling
checkDaemon once it's already running as a daemon, the fcntl locking
gotchas won't be a problem there.
Annex.LockFile has it's own separate lock pool layer, which has been
renamed to LockCache. This is a persistent cache of locks that persist
until closed.
This is not quite done; lockContent stil needs to be converted.
This is certianly a cabal bug for not passing the build options in the
cabal file when building Setup.hs.
And, why oh why did ghc enable this warning by default? So unhappy with
this choice.
That failed on OSX. The temp dir was
/var/folders/fb/pnwjj52n7fg0r9mnvpsfll180000gr/T/downloadurl
and the relative path
../../../../../../Volumes/Visitors/joeyh/git-annex/r/.git/...
Didn't work. I have no clue why, how did OSX manage to break this?
But, the relative path is longer most of the time anyway, so let's
just use the absolute path.
Ambiguous occurrence `bracket'
It could refer to either `Control.Exception.bracket',
imported from `Control.Exception' at Utility/FileMode.hs:14:27-33
(and originally defined in `Control.Exception.Base')
or `Utility.Exception.bracket',
imported from `Utility.Exception' at Utility/FileMode.hs:22:1-24
(and originally defined in `Control.Monad.Catch')
Since we started using this for git repos, when a remote was on another
drive, it resulted in a bogus relative path to it being used by git-annex,
which didn't work.
I don't quite understand the cause of the deadlock. It only occurred
when git-annex-shell transferinfo was being spawned over ssh to feed
download transfer progress back. And if I removed this line from
feedprogressback, the deadlock didn't occur:
bytes <- readSV v
The problem was not a leaked FD, as far as I could see. So what was it?
I don't know.
Anyway, this is a nice clean implementation, that avoids the deadlock.
Just fork off the async threads to handle filtering the stdout and stderr,
and let them clean up their handles whenever they decide to exit.
I've verified that the handles do get promptly closed, although a little
later than I would expect. Presumably that "little later" is what
was making waiting on the threads deadlock.
Despite the late exit, the last line of stdout and stderr appears where
I'd want it to, so I guess this is ok..
Stderr reader blocks waiting for all stderr, and so blocks the process ever
exiting.
I tried several ways to get around this, but no success yet. For now,
disable the stderr reader entirely.
It sounds worse than it is. ;)
Some external special remotes may run commands that display progress on
stderr. If git-annex is run with --quiet, this should filter out such
displays while letting the errors through.
Came up with a generic way to filter out progress messages while keeping
errors, for commands that use stderr for both.
--json mode will disable command outputs too.
New approach is to do it the expensive way for the first 100 paths
on the command line, but then assume the user doesn't care about order too
much and fall back to the cheap way that does not preserve order.
In this situation, curl -o exits successfully without creating the output
file.
There was already a workaround for curl file:/// but I did not realize this
also affected regular url downloads.
To fix it, pre-create the destination file before starting curl.
Since we cannot always know the size of an url before trying to download
it, let's always do this.
Note that since curl is told -C -, we have to consider if this
makes curl try to do a ranged download, which might fail on some servers
where a regular download would have succeeded. My testing indicates
this isn't a problem; since the file is empty, curl seems to not try to
do a ranged download.
Original report: https://github.com/datalad/datalad/issues/79
Curl bug report: https://github.com/bagder/curl/issues/183
The fix is to stop using w82s, which does not properly reconstitute unicode
strings. Instrad, use utf8 bytestring to get the [Word8] to base64. This
passes unicode through perfectly, including any invalid filesystem encoded
characters.
Note that toB64 / fromB64 are also used for creds and cipher
embedding. It would be unfortunate if this change broke those uses.
For cipher embedding, note that ciphers can contain arbitrary bytes (should
really be using ByteString.Char8 there). Testing indicated it's not safe to
use the new fromB64 there; I think that characters were incorrectly
combined.
For credpair embedding, the username or password could contain unicode.
Before, that unicode would fail to round-trip through the b64.
So, I guess this is not going to break any embedded creds that worked
before.
This bug may have affected some creds before, and if so,
this change will not fix old ones, but should fix new ones at least.
hGetSomeString reads one byte at a time, so unicode bytes are not composed.
The problem comes when outputting that to the console with hPut; that
tried to apply the handle's encoding, and so we get mojibake.
Instead, use ByteStrings, and only convert it to a string for parsing, not
for display.
Note that there are a couple of other things that use hGetSomeString,
which I've left as-is for now.
This reverts commit a7f05c007b.
Consider: relPathDirToFile (absPathFrom "/tmp/repo/xxx" "y/bar") "/tmp/repo/.git/annex/objects/xxx"
This needs to always yield "../../../.git/annex/objects/xxx" but on
Windows, it is "..\\..\\/tmp/repo/.git/annex/objects/xxx"
This is necessary for interop between inode caches created on unix and
windows. Which is more important than supporting inodecaches for large keys
with the wrong size, which are broken anyway.
There should be no slowdown from this change, except on Windows.
Avoid using fileSize which maxes out at just 2 gb on Windows.
Instead, use hFileSize, which doesn't have a bounded size.
Fixes support for files > 2 gb on Windows.
Note that the InodeCache code only needs to compare a file size,
so it doesn't matter it the file size wraps. So it has been
left as-is. This was necessary both to avoid invalidating existing inode
caches, and because the code passed FileStatus around and would have become
more expensive if it called getFileSize.
This commit was sponsored by Christian Dietrich.
Reverts 965e106f24
Unfortunately, this caused breakage on Windows, and possibly elsewhere,
because parentDir and takeDirectory do not behave the same when there is a
trailing directory separator.
parentDir is less safe than takeDirectory, especially when working
with relative FilePaths. It's really only useful in loops that
want to terminate at /
This commit was sponsored by Audric SCHILTKNECHT.
This allows the git repository to be moved while git-annex is running in
it, with fewer problems.
On Windows, this avoids some of the problems with the absurdly small
MAX_PATH of 260 bytes. In particular, git-annex repositories should
work in deeper/longer directory structures than before. See
http://git-annex.branchable.com/bugs/__34__git-annex:_direct:_1_failed__34___on_Windows/
There are several possible ways this change could break git-annex:
1. If it changes its working directory while it's running, that would
be Bad News. Good news everyone! git-annex never does so. It would also
break thread safety, so all such things were stomped out long ago.
2. parentDir "." -> "" which is not a valid path. I had to fix one
instace of this, and I should probably wipe all calls to parentDir out
of the git-annex code base; it was never a good idea.
3. Things like relPathDirToFile require absolute input paths,
and code assumes that the git repo path is absolute and passes it to it
as-is. In the case of relPathDirToFile, I converted it to not make
this assumption.
Currently, the test suite has 16 failures.
Getting rid of build warning
warning: 'statfs64' is deprecated: first deprecated in OS X 10.6
[-Wdeprecated-declarations]
10.6 is much older than the oldest git-annex OSX port, so won't break
anything.
More aggressive rsync params fixup for windows. Param may contain a url, or
a file path, so check if it looks like a local file path and if so, fix it
up.
On windows only, rsyncUrlIsPath will treat c:foo as a path, rather than as
a rsyncurl starting with a host "c".
This should be essentially no-op change for hGetContentsMetered, since it
always gets the entire contents. So the only difference is that each chunk
of the lazy bytestring will always be the full chunk size. So, I'm pretty
sure this is safe. Also, the only current users of hGetContentsMetered are
reading files, so the stream won't block for long in the middle.
The improvement is that hGetUntilMetered will always get some multiple of
the defaultChunkSize. This will allow the S3 multipart code to pick a fixed
size and know that hGetUntilMetered will really get that size.
(cherry picked from commit bd09046291)
Didn't know that this library existed!
This includes making git-annex not re-exec itself on start on windows, and
making the test suite on Windows run tests without forking.
This reverts commit dd667844b6
and commit e6eff0e951.
Those commits were fine, except the android autobuilder currently has a bit
of a mess of yesod versions and broke. Better to wait on this.
Only use that when building with ancient yesod, which does not include it.
This also let me remove ifdefs in the file to support building with the new
version of yesod.
Found these with:
git grep "^ " $(find -type f -name \*.hs) |grep -v ': where'
Unfortunately there is some inline hamlet that cannot use tabs for
indentation.
Also, Assistant/WebApp/Bootstrap3.hs is a copy of a module and so I'm
leaving it as-is.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
This avoids cp -a overriding the default mode acls that the user might have
set in a git repository.
With GNU cp, this behavior change should not be a breaking change, because
git-anex also uses rsync sometimes in the same situation, and has only ever
preserved timestamps when using rsync.
Systems without GNU cp will no longer use cp -a, but instead just cp.
So, timestamps will no longer be preserved. Preserving timestamps when
copying between repos is not guaranteed anyway.
Closes: #729757
Note that while before checkTransfer this called getLock with WriteLock,
getLockStatus's use of ReadLock will also notice any exclusive locks.
Since transfer info files are only locked exclusively, never shared,
there is no behavior change.
Also, fixes checkLocked to actually return Just False when the file
exists, but is not locked.
Also fixes a test suite failures introduced in recent commits, where
inAnnexSafe failed in indirect mode, since it tried to open the lock file
ReadWrite. This is why the new checkLocked opens it ReadOnly.
This commit was sponsored by Chad Horohoe.
Added a convenience Utility.LockFile that is not a windows/posix
portability shim, but still manages to cut down on the boilerplate around
locking.
This commit was sponsored by Johan Herland.
(With the exception of daemon pid locking.)
This fixes at part of #758630. I reproduced the assistant locking eg, a
removable drive's annex journal lock file and forking a long-running
git-cat-file process that inherited that lock.
This did not affect Windows.
Considered doing a portable Utility.LockFile layer, but git-annex uses
posix locks in several special ways that have no direct Windows equivilant,
and it seems like it would mostly be a complication.
This commit was sponsored by Protonet.
The hoary old HTTP library was only used when checking if an url exists,
when curl was not available. It had many problems, including not supporting
https at all.
Now, this is done using http-conduit for all urls that it supports. Falls
back to curl for any url that http-conduit doesn't like (probably ftp etc,
but could also be an url that its parser chokes on for whatever reason).
This adds a new dependency on http-conduit, but webdav support already
indirectly depended on that, and the s3-aws branch also uses it.
This opens up the possibility of using http-conduit for large file
downloads, but for now I've left it using wget/curl.
This commit was sponsored by Paul Tötterman.
FileID type changed, needs Arbitrary instance.
On the plus side, getFileStatus on Windows now actually gets file id's,
not always 0, so direct mode is safer there now.
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
This reaping of any processes came to cause me problems when redoing the
rsync special remote -- a gpg process that was running gets waited on and
the place that then checks its return code fails.
I cannot reproduce any zombies when using the rsync special remote.
But I still can when using a normal git remote, accessed over ssh.
There is 1 zombie per file downloaded without this horrible hack enabled.
So, move the hack to only be used in that case.
This only performs some basic tests so far; no testing of chunking or
resuming. Also, the existing encryption type of the remote is used; it
would be good later to derive an encrypted and a non-encrypted version of
the remote and test them both.
This commit was sponsored by Joseph Liu.
Some remotes like External need to run store and retrieve actions in Annex,
not IO. In order to do that lift, I had to dive pretty deep into the
utilities, making Utility.Gpg and Utility.Tmp be partly converted to using
MonadIO, and Control.Monad.Catch for exception handling.
There should be no behavior changes in this commit.
This commit was sponsored by Michael Barabanov.
Leverage the new chunked remotes to automatically resume downloads.
Sort of like rsync, although of course not as efficient since this
needs to start at a chunk boundry.
But, unlike rsync, this method will work for S3, WebDAV, external
special remotes, etc, etc. Only directory special remotes so far,
but many more soon!
This implementation will also properly handle starting a download
from one remote, interrupting, and resuming from another one, and so on.
(Resuming interrupted chunked uploads is similarly doable, although
slightly more expensive.)
This commit was sponsored by Thomas Djärv.
Not yet used by any special remotes, but should not be too hard to add it
to most of them.
storeChunks is the hairy bit! It's loosely based on
Remote.Directory.storeLegacyChunked. The object is read in using a lazy
bytestring, which is streamed though, creating chunks as needed, without
ever buffering more than 1 chunk in memory.
Getting the progress meter update to work right was also fun, since
progress meter values are absolute. Finessed by constructing an offset
meter.
This commit was sponsored by Richard Collins.
Configure crashed on systems with that process and without eg, sha256sum.
The rest of the code in configure looks to work ok, since it uses sh -c to
probe for commands, and sh is always in path so it works.
Dunno about all the rest of git-annex. Not a huge amount of external
program use, other than git, so perhaps this won't be a large pain.
Note that boolSystem can throw an exception now if the program doesn't
exist. Could easily be changed back to False.
Minor because normally only 1 FD is leaked per git-annex run. However,
the test suite leaks a few hundred FDs, and this broke it on the Debian
autobuilders, which seem to have a tigher than usual ulimit.
The leak was introduced by the lazy getDirectoryContents' that was
introduced in e6330988dd in order to scale to
millions of journal files -- if the lazy list was never fully consumed, the
directory handle did not get closed.
Instead, pull in openDirectory/readDirectory/closeDirectory code that I
already developed and submitted in a patch to the haskell directory library
earlier. Using this in journalDirty avoids the place that the lazy list
caused a problem. And using it in stageJournal eliminates the need for
getDirectoryContents'.
The getJournalFiles* functions are switched back to using the regular
strict getDirectoryContents. I'm not sure if those always consume the whole
list, so this avoids any leak. And the things that call those are things
like git annex unused, which also look at every file committed to the
git-annex branch, so would need more work to scale to insane numbers of
files anyway.
Yes, this means that git annex webapp on windows execs git-annex, which
execs itself to set env, and the execs itself again to redirect logs.
This is disgusting. This is Windows(TM).
Rather than calculating the TSDelta once, and caching it, this now
reads the inode sential file's InodeCache file once, and then each time a
new InodeCache is generated, looks at the sentinal file to get the current
delta.
This way, if the time zone changes while git-annex is running, it will
adapt.
This adds some inneffiency, but only on Windows, and only 1 stat per new
file added. The worst innefficiency is that `git annex status` and
`git annex sync` will now (on Windows) stat the inode sentinal file once per
file in the repo.
It would be more efficient to use getCurrentTimeZone, rather than needing
to stat the sentinal file. This should be easy to do, once the time
package gets my bugfix patch.
This commit was sponsored by Jürgen Lüters.
On Windows, changing the time zone causes the apparent mtime of files to
change. This confuses git-annex, which natually thinks this means the files
have actually been modified (since THAT'S WHAT A MTIME IS FOR, BILL <sheesh>).
Work around this stupidity, by using the inode sentinal file to detect if
the timezone has changed, and calculate a TSDelta, which will be applied
when generating InodeCaches.
This should add no overhead at all on unix. Indeed, I sped up a few
things slightly in the refactoring.
Seems to basically work! But it has a big known problem:
If the timezone changes while the assistant (or a long-running command)
runs, it won't notice, since it only checks the inode cache once, and
so will use the old delta for all new inode caches it generates for new
files it's added. Which will result in them seeming changed the next time
it runs.
This commit was sponsored by Vincent Demeester.
Deal with FAT's low resolution timestamps, which in combination with
Linux's caching of higher res timestamps while a FAT is mounted, caused
direct mode repositories on FAT to seem to have modified files after they
were unmounted and remounted.
This commit was sponsored by Fabrice Rossi.
This version of wai changed the type of Middleware, so I cannot seem
to liftIO inside it. So, got rid of a lot of not really needed
complexity to use System.Log.Logger's logging stuff, and just use
the standard wai stdout logger when debug logging is enabled.
Format may change some, and it logs http to stdout instead of stderr
now. Doesn't matter for the webapp since both go to the same log anyway.
