This threw an unusual exception w/o an error message when probing to see if
the bucket exists yet. So rather than relying on tryS3, catch all
exceptions.
This does mean that it might get an exception for some transient network
error, think this means the bucket DNE yet, and try to create it, and then
fail when it already exists.
When uploading the last part of a file, which was 640229 bytes, S3 rejected
that part: "Your proposed upload is smaller than the minimum allowed size"
I don't know what the minimum is, but the fix is just to include the last
part into the previous part. Since this can result in a part that's
double-sized, use half-sized parts normally.
Unfortunately, I don't fully understand why it was leaking using the old
method of a lazy bytestring. I just know that it was leaking, despite
neither hGetUntilMetered nor byteStringPopper seeming to leak by
themselves.
The new method avoids the lazy bytestring, and simply reads chunks from the
handle and streams them out to the http socket.
Untested and not even compiled yet.
Testing should include checks that file content streams through without
buffering in memory.
Note that CL.consume causes all the etags to be buffered in memory.
This is probably nearly unavoidable, since a request has to be constructed
that contains the list of etags in its body. (While it might be possible to
stream generation of the body, that would entail making a http request that
dribbles out parts of the body as the multipart uploads complete, which is
not likely to work well..
To limit this being a problem, it's best for partsize to be set to some
suitably large value, like 1gb. Then a full terabyte file will need only
1024 etags to be stored, which will probably use around 1 mb of memory.
I'm a little stuck on getting the list of etags of the parts.
This seems to require taking the md5 of each part locally,
which doesn't get along well with lazily streaming in the part from the
file. It would need to read the file twice, or lose laziness and buffer a
whole part -- but parts might be quite large.
This seems to be a problem with the API provided; S3 is supposed to return
an etag, but that is not exposed. I have filed a bug:
https://github.com/aristidb/aws/issues/141
That and S3 are all that uses creds currently, except that external
remotes can use creds. I have not handled showing info about external
remote creds because they can have 0, 1, or more separate cred pairs, and
there's no way for info to enumerate them or know how they're used.
So it seems ok to leave out creds info for external remotes.
This is intended to let the user easily tell if a remote's creds are
coming from info embedded in the repository, or instead from the
environment, or perhaps are locally stored in a creds file.
This commit was sponsored by Frédéric Schütz.
Now `git annex info $remote` shows info specific to the type of the remote,
for example, it shows the rsync url.
Remote types that support encryption or chunking also include that in their
info.
This commit was sponsored by Ævar Arnfjörð Bjarmason.
Found these with:
git grep "^ " $(find -type f -name \*.hs) |grep -v ': where'
Unfortunately there is some inline hamlet that cannot use tabs for
indentation.
Also, Assistant/WebApp/Bootstrap3.hs is a copy of a module and so I'm
leaving it as-is.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
See 2f3c3aa01f for backstory about how a repo
could be in this state.
When decryption fails, the repo must be using non-encrypted creds. Note
that creds are encrypted/decrypted using the encryption cipher which is
stored in the repo, so the decryption cannot fail due to missing gpg keys
etc. (For !shared encryptiom, the cipher is iteself encrypted using some
gpg key(s), and the decryption of the cipher happens earlier, so not
affected by this change.
Print a warning message for !shared repos, and continue on using the
cipher. Wrote a page explaining what users hit by this bug should do.
This commit was sponsored by Samuel Tardieu.
encryptionSetup must be called before setRemoteCredPair. Otherwise,
the RemoteConfig doesn't have the cipher in it, and so no cipher is used to
encrypt the embedded creds.
This is a security fix for non-shared encryption methods!
For encryption=shared, there's no security problem, just an
inconsistentency in whether the embedded creds are encrypted.
This is very important to get right, so used some types to help ensure that
setRemoteCredPair is only run after encryptionSetup. Note that the external
special remote bypasses the type safety, since creds can be set after the
initial remote config, if the external special remote program requests it.
Also note that IA remotes never use encryption, so encryptionSetup is not
run for them at all, and again the type safety is bypassed.
This leaves two open questions:
1. What to do about S3 and glacier remotes that were set up
using encryption=pubkey/hybrid with embedcreds?
Such a git repo has a security hole embedded in it, and this needs to be
communicated to the user. Is the changelog enough?
2. enableremote won't work in such a repo, because git-annex will
try to decrypt the embedded creds, which are not encrypted, so fails.
This needs to be dealt with, especially for ecryption=shared repos,
which are not really broken, just inconsistently configured.
Noticing that problem for encryption=shared is what led to commit
fbdeeeed5f, which tried to
fix the problem by not decrypting the embedded creds.
This commit was sponsored by Josh Taylor.
This reverts commit fbdeeeed5f.
I can find no basis for that commit and think that I made it in error.
setRemoteCredPair always encrypts using the cipher from remoteCipher,
even when the cipher is shared.
* New annex.hardlink setting. Closes: #758593
* init: Automatically detect when a repository was cloned with --shared,
and set annex.hardlink=true, as well as marking the repository as
untrusted.
Had to reorganize Logs.Trust a bit to avoid a cycle between it and
Annex.Init.
This avoids cp -a overriding the default mode acls that the user might have
set in a git repository.
With GNU cp, this behavior change should not be a breaking change, because
git-anex also uses rsync sometimes in the same situation, and has only ever
preserved timestamps when using rsync.
Systems without GNU cp will no longer use cp -a, but instead just cp.
So, timestamps will no longer be preserved. Preserving timestamps when
copying between repos is not guaranteed anyway.
Closes: #729757
This fixed one bug where it needed to be and wasn't (in Assistant.Unused).
And also found one place where lockContent was used unnecessarily (by
drop --from remote).
A few other places like uninit probably don't really need to lockContent,
but it doesn't hurt to do call it anyway.
This commit was sponsored by David Wagner.
Also fixes a test suite failures introduced in recent commits, where
inAnnexSafe failed in indirect mode, since it tried to open the lock file
ReadWrite. This is why the new checkLocked opens it ReadOnly.
This commit was sponsored by Chad Horohoe.
Added a convenience Utility.LockFile that is not a windows/posix
portability shim, but still manages to cut down on the boilerplate around
locking.
This commit was sponsored by Johan Herland.
This does mean that eg, copying multiple files to a local remote will
become slightly slower, since it now restarts git-cat-file after each copy.
Should not be significant slowdown.
The reason git-cat-file is run on the remote at all is to update its
location log. In order to add an item to it, it needs to get the current
content of the log. Finding a way to avoid needing to do that would be a
good path to avoiding this slowdown if it does become a problem somehow.
This commit was sponsored by Evan Deaubl.
(With the exception of daemon pid locking.)
This fixes at part of #758630. I reproduced the assistant locking eg, a
removable drive's annex journal lock file and forking a long-running
git-cat-file process that inherited that lock.
This did not affect Windows.
Considered doing a portable Utility.LockFile layer, but git-annex uses
posix locks in several special ways that have no direct Windows equivilant,
and it seems like it would mostly be a complication.
This commit was sponsored by Protonet.
Since encryption=shared, the encryption key is stored in the git repo, so
there is no point at all in encrypting the creds, also stored in the git
repo with that key. So `initremote` doesn't. The creds are simply stored
base-64 encoded.
However, it then tried to always decrypt creds when encryption was used..
Added a mkUnavailable method, which a Remote can use to generate a version
of itself that is not available. Implemented for several, but not yet all
remotes.
This allows testing that checkPresent properly throws an exceptions when
it cannot check if a key is present or not. It also allows testing that the
other methods don't throw exceptions in these circumstances.
This immediately found several bugs, which this commit also fixes!
* git remotes using ssh accidentially had checkPresent return
an exception, rather than throwing it
* The chunking code accidentially returned False rather than
propigating an exception when there were no chunks and
checkPresent threw an exception for the non-chunked key.
This commit was sponsored by Carlo Matteo Capocasa.
Implemented the Retriever.
Unfortunately, it is a fileRetriever and not a byteRetriever.
It should be possible to convert this to a byteRetiever, but I got stuck:
The conduit sink needs to process individual chunks, but a byteRetriever
needs to pass a single L.ByteString to its callback for processing. I
looked into using unsafeInerlaveIO to build up the bytestring lazily,
but the sink is already operating under conduit's inversion of control,
and does not run directly in IO anyway.
On the plus side, no more memory leak..
Fixes the memory leak on store.. the second oldest open git-annex bug!
Only retrieve remains to be converted.
This commit was sponsored by Scott Robinson.
Currently, initremote works, but not the other operations. They should be
fairly easy to add from this base.
Also, https://github.com/aristidb/aws/issues/119 blocks internet archive
support.
Note that since http-conduit is used, this also adds https support to S3.
Although git-annex encrypts everything anyway, so that may not be extremely
useful. It is not enabled by default, because existing S3 special remotes
have port=80 in their config. Setting port=443 will enable it.
This commit was sponsored by Daniel Brockman.
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
This speeds up the webdav special remote somewhat, since it often now
groups actions together in a single http connection when eg, storing a
file.
Legacy chunks are still supported, but have not been sped up.
This depends on a as-yet unreleased version of DAV.
This commit was sponsored by Thomas Hochstein.
Reusing http connection when operating on chunks is not done yet,
I had to submit some patches to DAV to support that. However, this is no
slower than old-style chunking was.
Note that it's a fileRetriever and a fileStorer, despite DAV using
bytestrings that would allow streaming. As a result, upload/download of
encrypted files is made a bit more expensive, since it spools them to temp
files. This was needed to get the progress meters to work.
There are probably ways to avoid that.. But it turns out that the current
DAV interface buffers the whole file content in memory, and I have
sent in a patch to DAV to improve its interfaces. Using the new interfaces,
it's certainly going to need to be a fileStorer, in order to read the file
size from the file (getting the size of a bytestring would destroy
laziness). It should be possible to use the new interface to make it be a
byteRetriever, so I'll change that when I get to it.
This commit was sponsored by Andreas Olsson.
This will allow special remotes to eg, open a http connection and reuse it,
while checking if chunks are present, or removing chunks.
S3 and WebDAV both need this to support chunks with reasonable speed.
Note that a special remote might want to cache a http connection across
multiple requests. A simple case of this is that CheckPresent is typically
called before Store or Remove. A remote using this interface can certianly
use a Preparer that eg, uses a MVar to cache a http connection.
However, it's up to the remote to then deal with things like stale or
stalled http connections when eg, doing a series of downloads from a remote
and other places. There could be long delays between calls to a remote,
which could lead to eg, http connection stalls; the machine might even
move to a new network, etc.
It might be nice to improve this interface later to allow
the simple case without needing to handle the full complex case.
One way to do it would be to have a `Transaction SpecialRemote cache`,
where SpecialRemote contains methods for Storer, Retriever, Remover, and
CheckPresent, that all expect to be passed a `cache`.
I tend to prefer moving toward explicit exception handling, not away from
it, but in this case, I think there are good reasons to let checkPresent
throw exceptions:
1. They can all be caught in one place (Remote.hasKey), and we know
every possible exception is caught there now, which we didn't before.
2. It simplified the code of the Remotes. I think it makes sense for
Remotes to be able to be implemented without needing to worry about
catching exceptions inside them. (Mostly.)
3. Types.StoreRetrieve.Preparer can only work on things that return a
Bool, which all the other relevant remote methods already did.
I do not see a good way to generalize that type; my previous attempts
failed miserably.
This involved making Remote.Gcrypt.gen expect a Repo with a regular,
non-gcrypt path. Since tht is what's stored as the Remote's gitrepo,
testremote can then modify it and feed it back into gen.
