Port 80 would need root, not a good idea, so pick something that might
work by default.
9418 is git protocol's port. 9419 is used by something, but nothing
known uses 9417, so it's as good a default as any.
But, it's buggy: the server hangs without processing the VALIDITY,
and I can't seem to work out why. As far as I can see, storefile
is getting as far as running the validitycheck, which is supposed to
read that, but never does.
This is especially strange because what seems like the same protocol
doesn't hang when servePut runs it. This made me think that it needed
to use inAnnexWorker to be more like servePut, but that didn't help.
Another small problem with this is that it does create an empty
.git/annex/tmp/ file for the key. Since this will usually be used in
combination with servePut, that doesn't seem worth worrying about much.
This means that when the client sends a truncated data to indicate
invalidity, DATA is not passed the full expected data. That leaves the
P2P connection in a state where it cannot be reused. While so far, they
are not reused, they will be later when proxies are supported. So, have
to close the P2P connection in this situation.
Always truncate instead. The padding risked something not noticing the
content was bad and getting a file that was corrupted in a novel way
with the padding "X" at the end. A truncated file is better.
Made the data-length header required even for v0. This simplifies the
implementation, and doesn't preclude extra verification being done for
v0.
The connectionWaitVar is an ugly hack. In servePut, nothing waits
on the waitvar, and I could not find a good way to make anything wait on
it.
Base64 can include '/', and with UUIDs and keys both used in routes,
the encoding needs to avoid that. Use base64url everywhere in the HTTP
protocol for consistency.
This came down to SendBytes waiting on the waitv. Nothing ever filled
it.
Only Annex.Proxy needs the waitv, and it handles filling it. So make it
optional.
The reason to use removeBeforeRemoteEndTime is twofold.
First, removeBefore sends two protocol commands. Currently, the HTTP
protocol runner only supports sending a single command per invocation.
Secondly, the http server gets a monotonic timestamp from the client. So
translating back to a POSIXTime would be annoying.
The timestamp flow with a proxy will be:
- client gets timestamp, which gets the monotonic timestamp from the
proxied remote via the proxy. The timestamp is currently not
proxied when there is a single proxy.
- client calls remove-before
- http server calls removeBeforeRemoteEndTime which sends REMOVE-BEFORE
to the proxied remote.
Websockets would work, but the problem with using them for this is that
each lockcontent call is a separate websocket connection. And that's an
actual TCP connection. One TCP connection per file dropped would be too
expensive. With http long polling, regular http pipelining can be used,
so it will reuse a TCP connection.
Unfortunately, at least with servant, bi-directional streams with long
polling don't result in true bidirectional full duplex communication.
Servant processes the whole client body stream before generating the server
body stream. I think it's entirely possible to do full bi-directional
communication over http, but it would need changes to servant.
And, there's no way for the client to tell if the server successfully
locked the content, since the server will keep processing the client
stream no matter what.:
So, added a new api endpoint, keeplocked. lockcontent will lock the key
for 10 minutes with retention lock, and then a call to keeplocked will
keep it locked for as long as needed. This does mean that there will
need to be a Map of locks by key, and I will probably want to add
some kind of lock identifier that lockcontent returns.
Added v2-v0 endpoints. These are tedious, but will be needed in order to
use the HTTP protocol to proxy to repositories with older git-annex,
where git-annex-shell will be speaking an older version of the protocol.
Changed GET to use 422 when the content is not present. 404 is needed to
detect when a protocol version is not supported.
Managed to avoid netstrings. Actually, using netstrings while streaming
lazy ByteString turns out to be very difficult. So instead, have a
header that specifies the expected amount of data, and then it can just
arrange to send a different amount of data if it needs to indicate
INVALID.
Also improved the interface for GET of a key.
This will be easy to implement with servant. It's also very efficient,
and fairly future-proof. Eg, could add another frame with other data.
This does make it a bit harder to use this protocol, but netstrings
probably take about 5 minutes to implement? Let's see...
import Text.Read
import Data.List
toNetString :: String -> String
toNetString s = show (length s) ++ ":" ++ s ++ ","
nextNetString :: String -> Maybe (String, String)
nextNetString s = case break (== ':') s of
([], _) -> Nothing
(sn, rest) -> do
n <- readMaybe sn
let (v, rest') = splitAt n (drop 1 rest)
return (v, drop 1 rest')
Ok, well, that took about 10 minutes ;-)
For clusters, the timestamps have to be translated, since each node can
have its own idea about what time it is. To translate a timestamp, the
proxy remembers what time it asked the node for a timestamp in
GETTIMESTAMP, and applies the delta as an offset in REMOVE-BEFORE.
This does mean that a remove from a cluster has to call GETTIMESTAMP on
every node before dropping from nodes. Not very efficient. Although
currently it tries to drop from every single node anyway, which is also
not very efficient.
I thought about caching the GETTIMESTAMP from the nodes on the first
call. That would improve efficiency. But, since monotonic clocks on
!Linux don't advance when the computer is suspended, consider what might
happen if one node was suspended for a while, then came back. Its
monotonic timestamp would end up behind where the proxying expects it to
be. Would that result in removing when it shouldn't, or refusing to
remove when it should? Have not thought it through. Either way, a
cluster behaving strangly for an extended period of time because one
of its nodes was briefly asleep doesn't seem like good behavior.
Added Maybe POSIXTime to SafeDropProof, which gets set when the proof is
based on a LockedCopy. If there are several LockedCopies, it uses the
closest expiry time. That is not optimal, it may be that the proof
expires based on one LockedCopy but another one has not expired. But
that seems unlikely to really happen, and anyway the user can just
re-run a drop if it fails due to expiry.
Pass the SafeDropProof to removeKey, which is responsible for checking
it for expiry in situations where that could be a problem. Which really
only means in Remote.Git.
Made Remote.Git check expiry when dropping from a local remote.
Checking expiry when dropping from a P2P remote is not yet implemented.
P2P.Protocol.remove has SafeDropProof plumbed through to it for that
purpose.
Fixing the remaining 2 build warnings should complete this work.
Note that the use of a POSIXTime here means that if the clock gets set
forward while git-annex is in the middle of a drop, it may say that
dropping took too long. That seems ok. Less ok is that if the clock gets
turned back a sufficient amount (eg 5 minutes), proof expiry won't be
noticed. It might be better to use the Monotonic clock, but that doesn't
advance when a laptop is suspended, and while there is the linux
Boottime clock, that is not available on other systems. Perhaps a
combination of POSIXTime and the Monotonic clock could detect laptop
suspension and also detect clock being turned back?
There is a potential future flag day where
p2pDefaultLockContentRetentionDuration is not assumed, but is probed
using the P2P protocol, and peers that don't support it can no longer
produce a LockedCopy. Until that happens, when git-annex is
communicating with older peers there is a risk of data loss when
a ssh connection closes during LOCKCONTENT.
Only implemented server side, not used client side yet.
And not yet implemented for proxies/clusters, for which there's a build
warning about unhandled cases.
This is P2P protocol version 3. Probably will be the only change in that
version..
Added a dependency on clock to access a monotonic clock.
On i386-ancient, that is at version 0.2.0.0.
This allows lockContentShared to lock content for eg, 10 minutes and
if the process then gets terminated before it can unlock, the content
will remain locked for that amount of time.
The Windows implementation is not yet tested.
In P2P.Annex, a duration of 10 minutes is used. This way, when p2pstdio
or remotedaemon is serving the P2P protocol, and is asked to
LOCKCONTENT, and that process gets killed, the content will not be
subject to deletion. This is not a perfect solution to
doc/todo/P2P_locking_connection_drop_safety.mdwn yet, but it gets most
of the way there, without needing any P2P protocol changes.
This is only done in v10 and higher repositories (or on Windows). It
might be possible to backport it to v8 or earlier, but it would
complicate locking even further, and without a separate lock file, might
be hard. I think that by the time this fix reaches a given user, they
will probably have been running git-annex 10.x long enough that their v8
repositories will have upgraded to v10 after the 1 year wait. And it's
not as if git-annex hasn't already been subject to this problem (though
I have not heard of any data loss caused by it) for 6 years already, so
waiting another fraction of a year on top of however long it takes this
fix to reach users is unlikely to be a problem.
This was caused by commit fb8ab2469d putting
an isPointerFile check in the wrong place. So if the file was not a pointer
file at that point, but got replaced by one before the file got locked
down, the pointer file would be ingested into the annex.
The fix is simply to move the isPointerFile check to after safeToAdd locks
down the file. Now if the file changes to a pointer file after the
isPointerFile check, ingestion will see that it changed after lockdown,
and will refuse to add it to the annex.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
The error message is not displayed to the use, but this mirrors the
behavior when a regular get from a special remote fails. At least now
there is not a protocol error.
Now that storeKey can have a different object file passed to it, this
complication is not needed. This avoids a lot of strange situations,
and will also be needed if streaming is eventually supported.
Wanted to also list a cluster's nodes when showing info for the cluster,
but that's hard because it needs getting the name of the proxying
remote, which is some prefix of the cluster's name, but if the names
contain dashes there's no good way to know which prefix it is.
Still needs some work.
The reason that the waitv is necessary is because without it,
runNet loops back around and reads the next protocol message. But it's
not finished reading the whole bytestring yet, and so it reads some part
of it.
Working, but lots of room for improvement...
Without streaming, so there is a delay before download begins as the
file is retreived from the special remote.
And when resuming it retrieves the whole file from the special remote
*again*.
Also, if the special remote throws an exception, currently it
shows as "protocol error".
This makes eg git-annex get default to using the cluster rather than an
arbitrary node, which is better UI.
The actual cost of accessing a proxied node vs using the cluster is
basically the same. But using the cluster allows smarter load-balancing
to be done on the cluster.
Before it was using a node that might have had a higher cost.
Also threw in a random selection from amoung the low cost nodes. Of
course this is a poor excuse for load balancing, but it's better than
nothing. Most of the time...
