They could be missing due to an interrupted git-annex at just the wrong
time during a prior graft, after which the tree objects got garbage
collected.
Or they could be missing because of manual messing with the git-annex
branch, eg resetting it to back before the graft commit.
Sponsored-by: Dartmouth College's OpenNeuro project
Fix a bug where interrupting git-annex while it is updating the git-annex
branch could lead to git fsck complaining about missing tree objects.
Interrupting git-annex while regraftexports is running in a transition
that is forgetting git-annex branch history would leave the
repository with a git-annex branch that did not contain the tree shas
listed in export.log. That lets those trees be garbage collected.
A subsequent run of the same transition then regrafts the trees listed
in export.log into the git-annex branch. But those trees have been lost.
Note that both sides of `if neednewlocalbranch` are atomic now. I had
thought only the True side needed to be, but I do think there may be
cases where the False side needs to be as well.
Sponsored-by: Dartmouth College's OpenNeuro project
Implemented alternateJournal, which git-remote-annex
uses to avoid any writes to the git-annex branch while setting up
a special remote from an annex:: url.
That prevents the remote.log from being overwritten with the special
remote configuration from the url, which might not be 100% the same as
the existing special remote configuration.
And it prevents an overwrite deleting of other stuff that was
already in the remote.log.
Also, when the branch was created by git-remote-annex, only delete it
at the end if nothing else has been written to it by another command.
This fixes the race condition described in
797f27ab05, where git-remote-annex
set up the branch and git-annex init and other commands were
run at the same time and their writes to the branch were lost.
Test suite passes this time. When committing the adjusted branch, use
the old method to make a message that old git-annex can consume. Also
made the code accept the new message, so that eventually
commitTreeExactMessage can be removed.
Sponsored-by: Kevin Mueller on Patreon
This reverts commit cee12f6a2f.
This commit broke git-annex init run in a repo that was cloned from a
repo with an adjusted branch checked out.
The problem is that findAdjustingCommit was not able to identify the
commit that created the adjusted branch. It seems that there is an extra
"\n" at the end of the commit message that it does not expect.
Since backwards compatability needs to be maintained, cannot just make
findAdjustingCommit accept it with the "\n". Will have to instead
have one commitTree variant that uses the old method, and use it for
adjusted branch committing.
sync, assist, import: Allow -m option to be specified multiple times, to
provide additional paragraphs for the commit message.
The option parser didn't allow multiple -m before, so there is no risk of
behavior change breaking something that was for some reason using multiple
-m already.
Pass through to git commands, so that the method used to assemble the
paragrahs is whatever git does. Which might conceivably change in the
future.
Note that git commit-tree has supported -m since git 1.7.7. commitTree
was probably not using it since it predates that version. Since the
configure script prevents building git-annex with git older than 2.1,
there is no risk that it's not supported now.
Sponsored-by: Nicholas Golder-Manning on Patreon
This is most of the way there, but not quite working.
The layout of migrate.tree/ needs to be changed to follow this approach.
git log will list all the files in tree order, so the new layout needs
to alternate old and new keys. Can that be done? git may not document
tree order, or may not preserve it here.
Alternatively, change to using git log --format=raw and extract
the tree header from that, then use
git diff --raw $tree:migrate.tree/old $tree:migrate.tree/new
That will be a little more expensive, but only when there are lots of
migrations.
Sponsored-by: Joshua Antonishen on Patreon
In particular, the mergedrefs file was written with CR added to each line,
but read without CRLF handling. This resulted in each update of the file
adding CR to each line in it, growing the number of lines, while also
preventing the optimisation from working, so it remerged unncessarily.
writeFile and readFile do NewlineMode translation on Windows. But the
ByteString conversion prevented that from happening any longer.
I've audited for other cases of this, and found three more
(.git/annex/index.lck, .git/annex/ignoredrefs, and .git/annex/import/). All
of those also only prevent optimisations from working. Some other files are
currently both read and written with ByteString, but old git-annex may have
written them with NewlineMode translation. Other files are at risk for
breakage later if the reader gets converted to ByteString.
This is a minimal fix, but should be enough, as long as I remember to use
fileLines when splitting a ByteString into lines. This leaves files written
using ByteString without CR added, but that's ok because old git-annex has
no difficulty reading such files.
When the mergedrefs file has gotten lines that end with "\r\r\r\n", this
will eventually clean it up. Each update will remove a single trailing CR.
Note that S8.lines is still used in eg Command.Unused, where it is parsing
git show-ref, and similar in Git/*. git commands don't include CR in their
output so that's ok.
Sponsored-by: Joshua Antonishen on Patreon
This does not improve Annex.Branch.files at all, since it still uses ++ to
combine the lists, so forcing all but the last one.
But when there are a lot of files in the private journal, it does avoid
--all (or a bare repo) from buffering the filenames in memory.
See commit 653b719472 for prior discussion of
this buffering.
Sponsored-by: Graham Spencer on Patreon
importfeed: Use caching database to avoid needing to list urls on every
run, and avoid using too much memory.
Benchmarking in my podcasts repo, importfeed got 1.42 seconds faster,
and memory use dropped from 203000k to 59408k.
Database.ImportFeed is Database.ContentIdentifier with the serial number
filed off. There is a bit of code duplication I would like to avoid,
particularly recordAnnexBranchTree, and getAnnexBranchTree. But these use
the persistent sqlite tables, so despite the code being the same, they
cannot be factored out.
Since this database includes the contentidentifier metadata, it will be
slightly redundant if a sqlite database is ever added for metadata. I
did consider making such a generic database and using it for this. But,
that would then need importfeed to update both the url database and the
metadata database, which is twice as much work diffing the git-annex
branch trees. Or would entagle updating two databases in a complex way.
So instead it seems better to optimise the database that
importfeed needs, and if the metadata database is used by another command,
use a little more disk space and do a little bit of redundant work to
update it.
Sponsored-by: unqueued on Patreon
git-annex only writes regular files there, but other things may drop junk
like empty .DAV directories around the tree. And trying to hash such things
can have weird and hard to understand effects. So it seems best to do a
small amount of work in statting the journal file to make sure it's a
regular file.
Sponsored-by: Jack Hill on Patreon
Significant startup speed increase by avoiding repeatedly checking if some
remote git-annex branch refs need to be merged when it is not newer.
One way this could happen is when there are 2 remotes that are themselves
connected. The git-annex branch on the first remote gets updated. Then the
second remote pulls from the first, and merges in its git-annex branch.
Then the local repo pulls from the second remote, and merges its git-annex
branch. At this point, a pull from the first remote will get a git-annex
branch that is not newer, but is not on the merged refs list.
In my big repo, git-annex startup time dropped from 4 seconds to 0.1 seconds.
There were 5 to 10 such remote refs out of 18 remotes.
Sponsored-by: Graham Spencer on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
Work around bug in git 2.37 that causes a segfault when when
core.untrackedCache is set, and broke git-annex init.
Depending on when git gets fixed and how widely the buggy versions are
used, this could be reverted quite soon, or need to linger for a long time.
It only makes git-annex init a tiny bit slower in a new repo.
Sponsored-by: Max Thoursie on Patreon
I would like for a new repo version to enable appends, but to do so
safely would need a v11 followed by a 1 year delay followed by a v12
that does it. Since a similar v9 and v10 transition is currently
happening, and is less than 6 months along in most repos, it does not
feel wise to stack up another year-long transition behind that. What if
I need to hurry up a new repo version for some other change?
Added todo so I remember to make this change at some time when a v11
and probably v12 repo version do make sense.
Sponsored-by: Dartmouth College's DANDI project
This reverts commit 2e6e9876e3.
This is gonna be needed after all.. The append will only be atomic if
the journal is locked, because the file being appended will have to be
moved out of the way to avoid an old version of git-annex seeing an
incomplete write to it. When git-annex finds that the file is not in the
journal, and checks the append location, locking will be needed to avoid
a race causing it to miss it in the append location too due to it being
moved back to the journal.
Added annex.alwayscompact setting which can be unset to speed up writes to
the git-annex branch in some cases.
Sponsored-by: Dartmouth College's DANDI project
This reverts commit 47358a6f95.
This added overhead, and will not be needed, because appends are going
to have to be made atomic for other reasons than avoiding incomplete
reads of data being appended.
In particular, when git-annex is interrupted in the middle of an append,
it must not leave the file with a partially written line. So appending
has to somehow be made fully atomic.
Currently this is not an improvement, but it allows for optimising
appendJournalFile later. With an optimised appendJournalFile, this will
greatly speed up access patterns like git-annex addurl of a lot of urls
to the same key, where the log file can grow rather large. Appending
rather than re-writing the journal file for each line can save a lot of
disk writes.
It still has to read the current journal or branch file, to check
if it can append to it, and so when the journal file does not exist yet,
it can write the old content from the branch to it. Probably the re-reads
are better cached by the filesystem than repeated writes. (If the
re-reads turn out to keep performance bad, they could be eliminated, at
the cost of not being able to compact the log when replacing old
information in it. That could be enabled by a switch.)
While the immediate need is to affect addurl writes, it was implemented
at the level of presence logs, so will also perhaps speed up location logs.
The only added overhead is the call to isNewInfo, which only needs to
compare ByteStrings. Helping to balance that out, it avoids compactLog
when it's able to append.
Sponsored-by: Dartmouth College's DANDI project
This is not currently necessary; journal files are updated atomically.
However, for faster appends to large journal files, locking on read will
be needed, because appends are not atomic.
Sponsored-by: Dartmouth College's DANDI project
Capstone to this feature. Any transitions that have been performed on an
unmerged remote ref but not on the local git-annex branch, or vice-versa
have to be applied on the fly when reading files.
Sponsored-by: Dartmouth College's Datalad project
It would be difficult to make Annex.Branch.files query the unmerged
git-annex branches. Might be possible, similar to what was discussed in
7f6b2ca49c but again I decided to make it
not do anything in that situation to start with before adding such a
complicated thing.
git-annex info uses it when getting info about a repostory. The choices
were to make that fail with an error, or display the info it can, and
change the output slightly for the bits of info it cannot access. While
that is a behavior change, and I want to avoid any behavior changes due
to unmerged git-annex branches in a read-only repo, displaying a message
that is not a number seems unlikely to break anything that was consuming
a number, any worse than throwing an exception would. Probably.
Also git-annex unused --from origin is made to throw an error, but
it would fail later anyway when trying to write to the unused log files.
Sponsored-by: Dartmouth College's Datalad project
This makes --all error out in that situation. Which is better than
ignoring information from the branches.
To really handle the branches right, overBranchFileContents would need
to both query all the branches and union merge file contents
(or perhaps not provide any file content), as well as diffing between
branches to find files that are only present in the unmerged branches.
And also, it would need to handle transitions..
Sponsored-by: Dartmouth College's Datalad project
The way precaching works, it can't merge in information from those
branches efficiently, so just disable it and fall back to
Annex.Branch.get in order to get the correct information.
Sponsored-by: Dartmouth College's Datalad project
Improved support for using git-annex in a read-only repository, git-annex
branch information from remotes that cannot be merged into the git-annex
branch will now not crash it, but will be merged in memory.
To avoid this making git-annex behave one way in a read-only repository,
and another way when it can write, it's important that Annex.Branch.get
return the same thing (modulo log file compaction) in both cases.
This manages that mostly. There are some exceptions:
- When there is a transition in one of the remote git-annex branches
that has not yet been applied to the local or other git-annex branches.
Transitions are not handled.
- `git-annex log` runs git log on the git-annex branch, and so
it will not be able to show information coming from the other, not yet
merged branches.
- Annex.Branch.files only looks at files in the git-annex branch and not
unmerged branches. This affects git-annex info output.
- Annex.Branch.hs.overBranchFileContents ditto. Affects --all and
also importfeed (but importfeed cannot work in a read-only repo
anyway).
- CmdLine.Seek.seekFilteredKeys when precaching location logs.
Note use of Annex.Branch.fullname
- Database.ContentIdentifier.needsUpdateFromLog and updateFromLog
These warts make this not suitable to be merged yet.
This readonly code path is more expensive, since it has to query several
branches. The value does get cached, but still large queries will be
slower in a read-only repository when there are unmerged git-annex
branches.
When annex.merge-annex-branches=false, updateTo skips doing anything,
and so the read-only repository code does not get triggered. So a user who
is bothered by the extra work can set that.
Other writes to the repository can still result in permissions errors.
This includes the initial creation of the git-annex branch, and of course
any writes to the git-annex branch.
Sponsored-by: Dartmouth College's Datalad project
Fix bug that caused stale git-annex branch information to read when
annex.private or remote.name.annex-private is set.
The private journal file should not prevent reading more current
information from the git-annex branch, but used to.
Note that, overBranchFileContents has to do additional work now, when
there's a private journal file, it reads from the branch redundantly
and more slowly.
Sponsored-by: Jack Hill on Patreon
This is to track down what file in .git/annex/ is being written to via a
temp file when the repository is read-only.
Sponsored-by: Dartmouth College's Datalad project
init: When annex.commitmessage is set, use that message for the commit
that creates the git-annex branch.
This will be used by filter-branch too, and it seems to make sense to let
annex.commitmessage affect it.
filterBranch should be reusable for copy-branch command.
Changed LogVariety to differentiate between LocationLog and UrlLog;
only location logs contain uuids and need to be filtered by uuid,
while url logs do not. This does not change current behavior,
but it will let filterBranch be reused without filtering url logs
incorrectly.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
This only partly fixes importfeed to see journalled files, since it
separately cats metadata directly from the branch. Held off on a
changelog for a bug fix until that's dealt with.
At this point, private repos should mostly work, except for a few
commands that directly read from the git-annex branch and will not see
the private journal.
Private index not yet implemented.
