Binary packages are rebuilding. If your kernel is not rebuilt yet, and
you don't want to build it yourself, just checkout the previous
pmbootstrap commit.
This commit also changes the arch from the postmarketOS kernels from
"all" to the ones where we actually have a kernel config.
Fixes#1229.
Fixes#1227.
This also updates the hash in linux-postmarketos-mainline, because the
hash changed upstream (they updated their git version server-side?).
This port includes:
* Weston including touch and WiFi (using e.g. firmware-samsung-i9305) works.
* Touchscreen calibration for osk-sdl
* Sound configuration
* Udev rules for touch and pen, pen works!
* Automatically generate a calibration matrix for libinput
This takes the calibration matrix for wayland and divides the pixel
offsets by the device width/height.
* Bump pkgrels of devices using devicepkg-dev
This causes new packages to be generated, using the new devicepkg-dev
version.
The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm
Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches
are needed for successful compilation. The screen dimension is 720x1280.
The touchscreen device name is ft5x06_i2c. Use this name for udev
instead of hardcoded device path. Also add a workaround for red
screen weston by setting weston_pixman to 2
The screen doesn't refresh. Enabling msm-fb-refresher as suggested.
Add udev rule to indicate whether the device is in charging state.
Green led indicates that the device is charging, whereas red light
indicates that the device is discharging.
For prima wlan module to work, an initialization procedure is needed (
echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module
(wlan.ko). Also build the prima wlan as module.
Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware
to run. Add the required wifi firmware to enable the wifi interface.
Add an openrc service to load wlan module after wcnss_service is
initialized.
Current status:
- flashing only manually (intel phones have different bootimg format)
- usb networking works
- xorg works using fbdev
- packages needed for wayland are not available for x86
- touch works in xorg and osk-sdl
Add a blobtools option to the deviceinfo file for creating specific
blobs for the Asus TF101 tablet. This will make it easier to flash
afterwards with ADB.
- Removed the framebuffer configuration in the initramfs hook
- Added patch for fixing the framebuffer mode in the kernel source
- Cleanup linux-samsung-i9070 APKBUILD
Also added the watchdog-kick package:
Some devices (namely Nokia N9/950) use more than one watchdog, and
watchdog-kick package kicks all of /dev/watchdogs? every 10 seconds so
they don't reset the device
* Don't ask for the mesa driver when the Qemu arch is not the
native arch and always use swrast in that case
* qemu-vexpress: use LTS kernel
* qemu-aarch64: use drm-backend for weston
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
The RGB values were not calculated correctly. This patch was send to
me by cascaro and works great. All credits goes to him.
This also fixes the issue of Weston not automatically recognizing the
good pixman type without setting it in the deviceinfo file.
* Added redscreen kernel patch and xorg config
* Moved weston and x11 specific config to subpackage
* Removed deviceinfo_weston_pixman_type for hammerhead
* Added msm-fb-refresher to hammerhead
This adds a new deviceinfo 'flash_fastboot_max_size' used for
preventing fastboot from flashing a system partition that is too
large. Some devices do not support flashing over a certain size
(e.g. 500MB).
The mesa driver, which ends up in the installation image, needs to be known
before the installation is done (in other words: when running the qemu action,
it is to late as the image has already been generated). That's why one can
choose the Qemu mesa driver in `pmbootstrap init` now:
```
Device [qemu-amd64]:
Which mesa driver do you prefer for your Qemu device? Only select something other
than the default if you are having graphical problems (such as glitches).
Mesa driver (dri-swrast/dri-virtio) [dri-virtio]:
```
It is still possible to select `dri-swrast`, because `dri-virtio` may not work
in all cases, and that way we could easily debug it or experiment with other
mesa drivers (e.g. the "vmware" one, which is supported by mesa and Qemu).
Other changes:
* `pmbootstrap qemu` accepts a `--display` variable now, which passes the value
directly to `qemu`'s `display` option. It defaults to `sdl,gl=on` (@PureTryOut
reported that to work best with plasma mobile on his PC). `--display` and
`--spice` (which is still working) are mutually exclusive.
* Removed obsolete telnet port pass-through: We only use the debug telnet port
since osk-sdl has been merged.
* Add show-cursor to the Qemu command line, so it shows a cursor in X11
* Refactored the spice code (`command_spice` only returns the spice command,
because it has all necessary information already) and the spice port can be
specified on the commandline now (previously it was hardcoded in one place and
then always looked up from there).
* Start comments with capital letters.
* Keep the log on the screen a bit shorter (e.g. Qemu command is written to the
"pmbootstrap log" anyway, so there's no need to display it again).
* linux-postmarketos-stable: Adjust kernel configs
x86_64, armhf: enable as modules:
CONFIG_DRM_VIRTIO_GPU, CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_BALLOON
aarch64: all 3 options were already enabled as built-in (no change)
* Set '-vga virtio' for mesa-dri-virtio
* pmbootstrap init: Generate new port device- and linux-package
* adds `pmbootstrap aportgen device-*` and
`pmbootstrap aportgen linux-*`
* ask for confirmation when selecting a non-existing device
* generate the packages directly from init
* refactor aportgen code
* fixed some easy things in the linux- APKBUILD (more to come in
follow-up PRs!)
Testing:
* Test all questions to the user from pmb.config.init and pmb.aportgen.device
(except for the timezone question, because we would need to monkeypatch the
os.path.exists() function, which messes up pytest, so we'd need to refactor
the timezone function to be more testsuite friendly first)
* Run the device wizard in a testcase a few times and check the output, that
pmbootstrap.aportgen.device and pmbootstrap.aportgen.linux create by parsing
the resulting APKBUILDs and deviceinfo and checking its contents.
* Build the generated device package once in the same testcase
Thanks a lot to @drebrez for all the help with this one:
<https://github.com/postmarketOS/pmbootstrap/pull/821>
See also the updated porting guide:
<https://wiki.postmarketos.org/wiki/Porting_to_a_new_device>
This caused builds to fail with a modern GCC at least once, and while it originally was meant as
security feature by Qualcomm, "it is unsupported by Qualcomm, and opens up to a wide range
of potential attack surfaces that has not been audited by anyone."
* XFCE4/Hildon: Log to syslog, see also:
<https://github.com/postmarketOS/pmbootstrap/pull/762>
* Fix XFCE4 didn't start in qemu-amd64, because it required
libEGL.so.1, which is provided by mesa-egl. This is a dependency
of device-qemu-amd64-x11 now. (It worked for Hildon and Weston,
because they pull mesa-egl in with other packages.)
@drebrez deserves much credit for this one for all the testing,
bisecting and for fixing everything. Thank you very much!
---
* devices which need a custom weston.ini ship it with a install_if
subpackage, so it only gets installed when weston is installed. This
sounds complicated, but is actually pretty clean in the APKBUILD.
* postmarketos-ui-weston: has a weston.ini.default, which enables
xwayland and uses fbdev as backend (because that's what most
devices use!). It defaults to the weston.ini.default if there is no
weston.ini (as installed by the device package).
* changed spaces to tabs for consistency, general minor refactoring of
device-APKBUILDs
Placing such files in /tmp/ is an unnecessary attack vector, as
@pavelmachek showed. All udev rules, which mentioned /tmp/weston.log
do not contain any path anymore.
Logs can be read with:
logread -f /var/log/messages | grep weston
See also: <https://wiki.alpinelinux.org/wiki/Syslog>
* Rebase on 4.11.12 kernel upstream
I took the relevant patches from https://git.linaro.org/people/john.stultz/flo.git/log/?h=flo-v4.11 and
compiled with upstream kernel.org 4.11.12 kernel. 4.12rc1 and later have not fixed yet problems
with freedreno gpu hanging. So we now have an upstream source for the kernel and John Stultz
patches separately.
Set this to y as it does not seem to have problems in Alpine - CONFIG_HW_RANDOM_MSM=y
Enable USB OTG in kernel. I still need to find out how to enable it in Alpine.
* Use pkgver instead of hash and other changes
* Add dependencies for X11 and osk
Added pointercal. Added dependencies so Xfce would work out of the box. Made changes in
90-android-touch-dev.rules as they are needed for proper X11 touchscreen calibration.
* postmarketos-base: Execute setup-udev, remove mosh from dependencies
* Run setup-udev [0], because that is what `setup-xorg-base` does [1].
It configures more than one OpenRC service and it also messes with the
runlevels. Only after running that, Hildon works (tested in Qemu).
[0]: 2fbea8b8da/main/eudev/setup-udev
[1]: 06300dd483/setup-xorg-base.in (L25)
* Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone
uses it right now, and it's easy to add custom packages in `pmbootstrap init`
nowadays.
* Minor style changes in the `APKBUILD`
* [rx51] Remove udev-trigger service start
* Package Broadcom Wi-Fi firmware from AOSP
This uses a mirror of AOSP's platform/hardware/broadcom/wlan repo at version
android-8.0.0_r12 (6c8ef5b600cec5d36a54a0276fe8c97b9ab8d6bb).
This is needed as Nexus 6P uses a BCM4358, and the blob available in Alpine's
linux-firmware package is old and vulnerable to Broadpwn. See #513.
* device: angler: enable Wi-Fi and graphics output
Changes:
- Set resolution on bootup
This is copied from the Nexus 5's init script.
- Add Wi-Fi calibration file and change firmware path
This is also based on the Nexus 5's implementation.
- Enable CONFIG_VT and NFS in the kernel
- Explicitly use identity touchscreen calibration
- Rename the touchscreen udev rules
- Enable msm-fb-refresher
For some reason the ofono rules don't always work for the N900's modem.
This picks out the relevant parts of that rule and seems to successfully
set up the modem device every time now.
* pmb.helpers.run: support running processes in background
* enable QXL driver support in the linux kernel configurations so
that we can also use SPICE to connect to the VM.
QXL is a paravirtual graphics driver with 2D support
The SPICE project aims to provide a complete open source solution for remote
access to virtual machines in a seamless way.
Both DRM_QXL and DRM_BOCHS are enabled as modules.
According to [1], on Linux guests, the qxl and bochs_drm kernel modules
must be loaded in order to gain a decent performance
* qemu: add new option --spice to connect to VM using a SPICE client
If specified, 'pmbootstrap qemu' will look for some SPICE client in the
user's PATH and run qemu using the QXL driver.
Currently supported spice clients are 'spicy' and 'remote-viewer' but
adding support for more clients can be easily done.
qemu with qxl support will run on port 8077/tcp, which doesn't belong to
any well-known service and represents 'PM' in decimal.
References:
[0] https://www.linux-kvm.org/page/SPICE
[1] https://wiki.archlinux.org/index.php/QEMU#qxl
[2] https://wiki.archlinux.org/index.php/QEMU#SPICE
[3] https://github.com/postmarketOS/pmbootstrap/issues/453 (partially fixed)
* firmware-asus-flo: packaged all flo firmware
* device-asus-flo: depend on firmware-asus-flo package
* default android wifi config
* Add wifi and freedreno support
* change to console=ttyMSM0 - as per https://dflund.se/~triad/krad/nexus7-flo/
* Add current kernel config as it is currently working with wifi.
* Increase pkgrel to account for changes in the kernel config.
Quite a few things use dbus (plasma, hildon, ofono, connman,
networkmanager, etc) that I think it makes sense to just have this
started by default in pmOS rather than have every device package
implement this on their own.
In case someone shows up with a use-case, where dbus by default
is not desired, please speak up. Possible solutions are in #628.
* Started with stock kernel config (fairphone-perf_defconfig)
* Enabled DEVTMPFS
* Deactivated MSM_KGSL
* Enabled the serial console
* Enabled USB networking
This adds a custom swap file service, which allows specifying a
recommended swap size in the deviceinfo file via
`deviceinfo_swap_size_recommended`. For the N900 this defaults
to 1024 MB now. As the swap file is created in the root partition,
we have encrypted swap now (unless encryption is disabled with
`--no-fde`).
This is a workaround for #429, until the iteration count can be
specified directly in cryptsetup.
* Add default iter-time option, and option to override
* set SHA1 default hash for luksFormat, add option to override
* [RX51] load omap-sham in initramfs for HW accel. sha1
* Add LG G Watch (dory) support
* Use github.com mirror instead of googlesource.com to have fixed checksum
* Fix kernel compilation and remove unnecessary initfs-hook for framebuffer settings
* Check kernel config
* Allow specifying multiple kernel packages, and also no packages
which defaults to scanning all kernel configs (it is super fast
anyway)
* Add the check to Travis CI
* Adjust existing kernel configs, so they pass the kconfig_check.
(We've had to put in a lot of defaults in the aarch64
linux-postmarketos configs, that's why the diff is a bit unclean.)
* Increase modified kernel pkgrels
- Revert to LineageOS 14.1 kernel
- Enable virtual terminal
- Update touchscreen settings
At the moment, display output works, but only when the following is run:
while [ ! ]; do cat /sys/class/graphics/fb0/modes >
/sys/class/graphics/fb0/mode; done.
Adding INSTALL_MOD_STRIP will cause modules to be stripped after
they are installed (option --strip-debug will be used)
In case someone isn't happy with it, please open a PR that reverts
it for your device, or start a discussion as a new issue.
* No need to append DTB to kernel
* Remove kernel module build for now
* Add device-specific firmware package
* Add special partitions to fstab
* Fix typo in screen width
* Add maguro wifi support
* enable framebuffer and VT, WESTON STARTS
* make touchscreen work & fix merge conflict
Cherry-pick of lawl's commit, ed552e5d9272204c12f67bcb0401b3e08e57d35f.
* Initial Mozilla Flame packages
* Update dtbtool to use LineageOS upstream
* Use mkbootimg --dt flag only when deviceinfo_bootimg_qcdt is defined
* Update mkbootimg to use LineageOS upstream
* Add sparse image flashing on device-mozilla-flame
* Only support SD card install on Mozilla Flame
* Remove useless profile.sh on mozilla flame
* Package DTBs in /usr/lib/linux-mozilla-flame/
* Build and install modules in linux-mozilla-flame
Thanks to Pablo Castellano and Martijn Braam!
In postmarketOS we are now able to generate system images with the
correct configuration so that they can boot already using qemu
This commit brings the `pmbootstrap qemu` action.
This command is very handy because you don't have to set all the
qemu parameters, pmbootstrap does it for you.
* device-qemu-vexpress: Added kernel command line according to wiki
* qemu: Added workaround for image writing permissions
* qemu: Added support to launch postmarketOS in a QEMU virtual machine
- Support for emulating these architectures in QEMU: arm, aarch64, x86_84
- Generate QEMU command correctly depending no guest architecture (arm/x86)
- Run QEMU in the same architecture as the host by default
- Refactoring in pmb.parse.arch and pmb.qemu.run
- Raise exception if DTB file or system image are not present
- Display more useful information when something fails (e.g. image not found)
- Run qemu version depending on arch (host or argument), not device configured
* device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT"
* qemu: added --memory argument to specific guest RAM
* device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1)
* Added /etc/network/interfaces for qemu-amd64
* qemu: Added KVM support if /dev/kvm if present
* Specify separate machines for architecture
* qemu: Check if QEMU is installed instead of crashing
* Added graphics driver to qemu-aarch64
- Use arm (as used in qemu) instead of armhf (used in Alpine)
- qemu argument is -dtb
- Follow same style to build the command + arguments
* qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
* Packaged libsparse
libsparse from the Android project provides multiple tools like img2simg
and simg2img.
These are used to split a large image for the system partition into
separate smaller chunks with sparse headers
This is required for several devices (at least bullhead, fp2 and titan)
because it fixes the "Invalid sparse file format at header magi" error
https://github.com/postmarketOS/pmbootstrap/issues/299
* Added new variable deviceinfo_flash_sparse (fixes#299)
Right after the system image is generated, pmbootstrap checks this
variable. In case it is true, run img2simg on it
* motorola-titan: enable deviceinfo_flash_sparse
* libsparse: use source from github: anestisb/android-simg2img
It is not that easy to use the upstream archive because everytime
you download it, the files have the current date as creation date
and that makes the file have a different checksum every download
https://github.com/postmarketOS/pmbootstrap/pull/303#issuecomment-319017197
