Avoid treating refs/annex/last-index or other refs that are not commit
objects as evidence of repository corruption.
The repair code checks to find bad refs by trying to run `git log` on
them, and assumes that no output means something is broken. But git log
on a tree object is empty.
This was worth fixing generally, not as a special case, since it's certainly
possible that other things store tree or other objects in refs.
Sponsored-by: Max Thoursie on Patreon
rsync 3.2.4 broke backwards-compatability by preventing exposing filenames
to the shell. Made the rsync and gcrypt special remotes detect this and
disable shellescape.
An alternative fix would have been to always set RSYNC_OLD_ARGS=1.
Which would avoid the overhead of probing rsync --help for each affected
remote. But that is really very fast to run, and it seemed better to switch
to the modern code path rather than keeping on using the bad old code path.
Sponsored-by: Tobias Ammann on Patreon
Using removePathForcibly avoids concurrent removal problems.
The i386ancient build still uses an old version of ghc and directory that
do not include removePathForcibly though.
Sponsored-by: Dartmouth College's Datalad project
assistant: When annex.autocommit is set, notice commits that the user makes
manually, and push them out to remotes promptly.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
Removed vendored copy of http-client-restricted, and removed the
HttpClientRestricted build flag that avoided that dependency.
http-client-restricted is in Debian stable, and the i386ancient build also
uses it, so I think this vendored copy is no longer needed.
Sponsored-by: Noam Kremen on Patreon
add: Avoid unncessarily converting a newly unlocked file to be stored
in git when it is not modified, even when annex.largefiles does not
match it.
This fixes a reversion in version 10.20220222, where git-annex unlock
followed by git-annex add, followed by git commit file could result in
git thinking the file was modified after the commit.
I do have half a mind to remove the withUnmodifiedUnlockedPointers part
of git-annex add. It seems weird, despite that old bug report arguing
a case of consistency that it ought to behave that way. When git-annex
add surpises me, it seems likely it's wrong.. But for now, this is the
smallest possible fix.
Sponsored-by: Dartmouth College's Datalad project
Directory special remotes with importtree=yes have changed to once more
take inodes into account. This will cause extra work when importing from a
directory on a FAT filesystem that changes inodes on every mount.
To avoid that extra work, set ignoreinodes=yes when initializing a new
directory special remote, or change the configuration of your existing
remote: git-annex enableremote foo ignoreinodes=yes
This will mean a one-time re-import of all contents from every directory
special remote due to the changed setting.
73df633a62 thought
it was too unlikely that there would be modifications that the inode number
was needed to notice. That was probably right; it's very unlikely that a
file will get modified and end up with the same size and mtime as before.
But, what was not considered is that a program like NextCloud might write
two files with different content so closely together that they share the
mtime. The inode is necessary to detect that situation.
Sponsored-by: Max Thoursie on Patreon
Default to the number of CPU cores, which seems about optimal
on my laptop. Using one more saves me 2 seconds actually.
Better packing of workers improves speed significantly.
In 2 tests runs, I saw segfaulting workers despite my attempt
to work around that issue. So detect when a worker does, and re-run it.
Removed installSignalHandlers again, because I was seeing an
error "lost signal due to full pipe", which I guess was somehow caused
by using it.
Sponsored-by: Dartmouth College's Datalad project
Avoid git-annex test being very slow when run from within the standalone
linux tarball or OSX app.
It may not really be necessary to add to PATH the directory where the
git-annex binary resides, but it can't hurt. Most places where the test
suite or git-annex run git-annex, they use programPath, so won't need
a modified PATH. But I'm not sure if that's always the case.
Sponsored-by: Dartmouth College's Datalad project
Propagate nonzero exit status from git ls-files when a specified file does
not exist, or a specified directory does not contain any files checked into
git.
The recent completion of the annex.skipunknown transition exposed this
bug, that has unfortunately been lurking all along.
It is also possible that git ls-files errors out for some other reason
-- perhaps a permission problem -- and this will also fix error propagation
in such situations.
Sponsored-by: Dartmouth College's Datalad project
When annex.freezecontent-command is set, and the filesystem does not
support removing write bits, avoid treating it as a crippled filesystem.
The hook may be enough to prevent writing on its own, and some filesystems
ignore attempts to remove write bits.
Sponsored-by: Dartmouth College's Datalad project
It will then proceed to add the file the same as if it were any other
file containing possibly annexable content. Usually the file is one that
was annexed before, so the new, probably corrupt content will also be added
to the annex. If the file was not annexed before, the content will be added
to git.
It's not possible for the smudge filter to throw an error here, because
git then just adds the file to git anyway.
Sponsored-by: Dartmouth College's Datalad project
This format is designed to detect accidental appends, while having some
room for future expansion.
Detect when an unlocked file whose content is not present has gotten some
other content appended to it, and avoid treating it as a pointer file, so
that appended content will not be checked into git, but will be annexed
like any other file.
Dropped the max size of a pointer file down to 32kb, it was around 80 kb,
but without any good reason and certianly there are no valid pointer files
anywhere that are larger than 8kb, because it's just been specified what it
means for a pointer file with additional data even looks like.
I assume 32kb will be good enough for anyone. ;-) Really though, it needs
to be some smallish number, because that much of a file in git gets read
into memory when eg, catting pointer files. And since we have no use cases
for the extra lines of a pointer file yet, except possibly to add
some human-visible explanation that it is a git-annex pointer file, 32k
seems as reasonable an arbitrary number as anything. Increasing it would be
possible, eg to 64k, as long as users of such jumbo pointer files didn't
mind upgrading all their git-annex installations to one that supports the
new larger size.
Sponsored-by: Dartmouth College's Datalad project
File matching options like --include will be rejected in situations where
there is no filename to match against. (Or where there is a filename but
it's not relative to the cwd, or otherwise seemed too bothersome to match
against.)
The addition of listKeys' was necessary to avoid using more memory in the
common case of "git-annex info". Adding a filterM would have caused the
list to buffer in memory and not stream. This is an ugly hack, but listKeys
had previously run Annex operations inside unafeInterleaveIO (for direct
mode). And matching against a matcher should hopefully not change any Annex
state.
This does allow for eg `git-annex info somefile --include=*.ext`
although why someone would want to do that I don't really know. But it
seems to make sense to allow it.
But, consider: `git-annex info ./somefile --include=somefile`
This does not match, so will not display info about somefile.
If the user really wants to, they can `--include=./somefile`.
Using matching options like --copies or --in=remote seems likely to be
slower than git-annex find with those options, because unlike such
commands, info does not have optimised streaming through the matcher.
Note that `git-annex info remote` is not the same as
`git-annex info --in remote`. The former shows info about all files in
the remote. The latter shows local keys that are also in that remote.
The output should make that clear, but this still seems like a point
where users could get confused.
Sponsored-by: Jochen Bartl on Patreon
Implemented by making Git.Queue have a FlushAction, which can accumulate
along with another action on files, and runs only once the other action has
run.
This lets git-annex unlock queue up git update-index actions, without
conflicting with the restagePointerFiles FlushActions.
In a repository with filter-process enabled, git-annex unlock will
often not take any more time than before, though it may when the files are
large. Either way, it should always slow down less than git-annex status
speeds up.
When filter-process is not enabled, git-annex unlock will slow down as much
as git status speeds up.
Sponsored-by: Jochen Bartl on Patreon
annex.skipunknown now defaults to false, so commands like `git annex get foo*`
will not silently skip over files/dirs that are not checked into git.
Sponsored-by: Brock Spratlen on Patreon
* registerurl, unregisterurl: Improved output when reading from stdin
to be more like other batch commands.
* registerurl, unregisterurl: Added --json and --json-error-messages options.
Note that this did change the --batch output in a way that could possibly
break something that expected the old output to never change. I think it's
acceptable to break that because there has never been a guarantee of
unchanging output format except with --batch for most commands. The old
output was just really weird too!
One possible wart is that "git-annex registerurl" with no options now
seems to just hang, since it's waiting for stdin input. Before, it said
"registerurl (stdin)" which was clearer about what's happenening. But this
is a deprecated mode anyway, --batch makes clear what's happening. If
anything, this problem would be a reason to eventually remove the support
for reading from stdin w/o --batch.
Sponsored-by: Dartmouth College's Datalad project
takeByteString can only be used at the end of a parser, not before other
input. This was a dumb enough mistake that I audited the rest of the
code base for similar mistakes. Pity that attoparsec cannot avoid it at
the type level.
Fixes git-annex forget propagation between repositories. (reversion
introduced in version 7.20190122)
Sponsored-by: Brock Spratlen on Patreon
Seems that --no-ext-diff and -c diff.external= are not enough to disable
external diff command when gitattributes textconv specifies it.
I'm pretty sure that --no-ext-diff and -c diff.external= are not both
needed, but not 100%. Something about -G may need the latter to fully
disable diffs in some cases. So kept that part as it was.
Sponsored-by: Dartmouth College's Datalad project
The "+" argument only runs the command once, so is not safe to use. Using
";" instead would have been the simplest fix, but also the slowest.
Since my phone has an xargs that supports -0, I piped find to xargs
instead. Unsure how portable this will be, perhaps some android's don't
have xargs -0 or find -printf to send null terminated output.
The business with pipefail is necessary to make a failure of find cause the
import to fail. Probably this works on all androids, but if not, it will
probably just result in a failure of find being ignored. It would be
possible to make ignorefinderror just disable setting pipefail, but then
if some android has a shell that has pipefail enabled by default, ignorefinderror
would not work, so I kept the || true approach for that.
Sponsored-by: Max Thoursie on Patreon
Reject combinations of --batch (or --batch-keys) with options like --all or
--key or with filenames.
Most commands ignored the non-batch items when batch mode was enabled.
For some reason, addurl and dropkey both processed first the specified
non-batch items, followed by entering batch mode. Changed them to also
error out, for consistency.
Sponsored-by: Dartmouth College's Datalad project
This has tradeoffs, but is generally a win, and users who it causes git add to
slow down unacceptably for can just disable it again.
It needed to happen in an upgrade, since there are git-annex versions
that do not support it, and using such an old version with a v8
repository with filter.annex.process set will cause bad behavior.
By enabling it in v9, it's guaranteed that any git-annex version that
can use the repository does support it. Although, this is not a perfect
protection against problems, since an old git-annex version, if it's
used with a v9 repository, will cause git add to try to run
git-annex filter-process, which will fail. But at least, the user is
unlikely to have an old git-annex in path if they are using a v9
repository, since it won't work in that repository.
Sponsored-by: Dartmouth College's Datalad project
Do not populate the keys database with associated files,
because a bare repo has no working tree, and so it does not make sense to
populate it.
Queries of associated files in the keys database always return empty lists
in a bare repo, even if it's somehow populated. One way it could be
populated is if a user converts a non-bare repo to a bare repo.
Note that Git.Config.isBare does a string comparison, so this is not free!
But, that string comparison is very small compared to a sqlite query.
Sponsored-by: Erik Bjäreholt on Patreon
On a phone with Calyxos, adb find in /sdcard complains:
find: ./Android/data/com.android.providers.downloads.ui: Permission denied
But otherwise works, so this option makes import and export work ok, except
for that one app's data.
Sponsored-by: Graham Spencer
Recover from corrupted content being received from a git remote due eg to a
wire error, by deleting the temporary file when it fails to verify. This
prevents a retry from failing again.
Reversion introduced in version 8.20210903, when incremental verification
was added.
Only the git remote seems to be affected, although it is certianly
possible that other remotes could later have the same issue. This only
affects things passed to getViaTmp that return (False, UnVerified) due to
verification failing. As far as getViaTmp can tell, that could just as well
mean that the transfer failed in a way that would resume, so it cannot
delete the temp file itself. Remote.Git and P2P.Annex use getViaTmp internally,
while other remotes do not, which is why only it seems affected.
A better fix perhaps would be to improve the types of the callback
passed to getViaTmp, so that some other value could be used to indicate
the state where the transfer succeeded but verification failed.
Sponsored-by: Boyd Stephen Smith Jr.
Before it would pick one at random, though preferring ones that were not
dead over dead ones.
Now, if one is dead and the other not, it will use the non-dead one. But if
both are not dead, or both dead, it will error out, suggesting the user
clarify what they want to enable.
Sponsored-by: Luke Shumaker on Patreon
So that importing does not replace them with plain files.
This works similarly to how the previous handling of submodules and
matchers did, except that annexed symlinks still get exported as plain
files of course, it's only non-annexed symlinks that it does not make sense
to export.
When symlinks have previously been exported, updating the export will
unexport them after upgrading to this commit.
Sponsored-by: Kevin Mueller on Patreon
Improved support for using git-annex in a read-only repository, git-annex
branch information from remotes that cannot be merged into the git-annex
branch will now not crash it, but will be merged in memory.
To avoid this making git-annex behave one way in a read-only repository,
and another way when it can write, it's important that Annex.Branch.get
return the same thing (modulo log file compaction) in both cases.
This manages that mostly. There are some exceptions:
- When there is a transition in one of the remote git-annex branches
that has not yet been applied to the local or other git-annex branches.
Transitions are not handled.
- `git-annex log` runs git log on the git-annex branch, and so
it will not be able to show information coming from the other, not yet
merged branches.
- Annex.Branch.files only looks at files in the git-annex branch and not
unmerged branches. This affects git-annex info output.
- Annex.Branch.hs.overBranchFileContents ditto. Affects --all and
also importfeed (but importfeed cannot work in a read-only repo
anyway).
- CmdLine.Seek.seekFilteredKeys when precaching location logs.
Note use of Annex.Branch.fullname
- Database.ContentIdentifier.needsUpdateFromLog and updateFromLog
These warts make this not suitable to be merged yet.
This readonly code path is more expensive, since it has to query several
branches. The value does get cached, but still large queries will be
slower in a read-only repository when there are unmerged git-annex
branches.
When annex.merge-annex-branches=false, updateTo skips doing anything,
and so the read-only repository code does not get triggered. So a user who
is bothered by the extra work can set that.
Other writes to the repository can still result in permissions errors.
This includes the initial creation of the git-annex branch, and of course
any writes to the git-annex branch.
Sponsored-by: Dartmouth College's Datalad project
sync: Better error message when unable to export to a remote because
remote.name.annex-tracking-branch is configured to a ref that does not
exist.
It does not suggest how to fix the problem because there are several
possible solutions: Change the git config to point to something that does
exist, git add some files, or put files on the special remote that will be
imported and so populate the ref.
I considered just silently not doing anything, which is what it does
when annex-tracking-branch = master and nothing has been committed to
master yet. But it seems better to be explicit about it, since this is a
fairly confusing situation to find yourself in.
Sponsored-By: Max Thoursie on Patreon
So that eg, addurl of several large files that take time to download will
update the index for each file, rather than deferring the index updates to
the end.
In cases like an add of many smallish files, where a new file is being
added every few seconds. In that case, the queue will still build up a
lot of changes which are flushed at once, for best performance. Since
the default queue size is 10240, often it only gets flushed once at the
end, same as before. (Notice that updateQueue updated _lastchanged
when adding a new item to the queue without flushing it; that is
necessary to avoid it flushing the queue every 5 minutes in this case.)
But, when it takes more than a 5 minutes to add a file, the overhead of
updating the index immediately is probably small, so do it after each
file. This avoids git-annex potentially taking a very very long time
indeed to stage newly added files, which can be annoying to the user who
would like to get on with doing something with the files it's already
added, eg using git mv to rename them to a better name.
This is only likely to cause a problem if it takes say, 30 seconds to
update the index; doing an extra 30 seconds of work after every 5
minute file add would be less optimal. Normally, updating the index takes
significantly less time than that. On a SSD with 100k files it takes
less than 1 second, and the index write time is bound by disk read and
write so is not too much worse on a hard drive. So I hope this will not
impact users, although if it does turn out to, the time limit could be
made configurable.
A perhaps better way to do it would be to have a background worker
thread that wakes up every 60 seconds or so and flushes the queue.
That is made somewhat difficult because the queue can contain Annex
actions and so this would add a new source of concurrency issues.
So I'm trying to avoid that approach if possible.
Sponsored-by: Erik Bjäreholt on Patreon
Continuing along the same lines as commit
2739adc258, it seems that
while Remote -> Retriever expands to the same data type this changes
it to, ghc 9.0.1 refuses to consider them equiviant. I guess it has
something to do with the forall?
The rest of the build all succeeds, although the stack build then crashes:
Linking .stack-work/dist/x86_64-linux-tinfo6/Cabal-3.4.0.0/build/git-annex/git-annex ...
Completed 233 action(s).
Prelude.chr: bad argument: 2214592520
This issue seems likely to be about it:
https://github.com/commercialhaskell/stack/pull/5508
I'm building with stack from debian, version 2.3.3, so a newer stack
probably avoids that. Anyway, despite that stack problem,
the git-annex binary is built, and works.
The stack.yaml I used for this build was patched as follows:
diff --git a/stack.yaml b/stack.yaml
index 8dac87c15..62c4b5b9d 100644
--- a/stack.yaml
+++ b/stack.yaml
@@ -1,6 +1,6 @@
flags:
git-annex:
- production: true
+ production: false
assistant: true
pairing: true
torrentparser: true
@@ -14,7 +14,7 @@ flags:
httpclientrestricted: true
packages:
- '.'
-resolver: lts-18.13
+resolver: nightly-2021-09-07
extra-deps:
- IfElse-0.85
- aws-0.22
Sponsored-by: Graham Spencer on Patreon
This reverts commit 66b2536ea0.
I misunderstood commit ac56a5c2a0
and caused a FD leak when pid locking is not used.
A LockHandle contains an action that will close the underlying lock
file, and that action is run when it is closed. In the case of a shared
lock, the lock file is opened once for each LockHandle, and only
the one for the LockHandle that is being closed will be closed.
Seem there are several races that happen when 2 threads run PidLock.tryLock
at the same time. One involves checkSaneLock of the side lock file, which may
be deleted by another process that is dropping the lock, causing checkSaneLock
to fail. And even with the deletion disabled, it can still fail, Probably due
to linkToLock failing when a second thread overwrites the lock file.
The same can happen when 2 processes do, but then one process just fails
to take the lock, which is fine. But with 2 threads, some actions where failing
even though the process as a whole had the pid lock held.
Utility.LockPool.PidLock already maintains a STM lock, and since it uses
LockShared, 2 threads can hold the pidlock at the same time, and when
the first thread drops the lock, it will remain held by the second
thread, and so the pid lock file should not get deleted until the last
thread to hold it drops the lock. Which is the right behavior, and why a
LockShared STM lock is used in the first place.
The problem is that each time it takes the STM lock, it then also calls
PidLock.tryLock. So that was getting called repeatedly and concurrently.
Fixed by noticing when the shared lock is already held, and stop calling
PidLock.tryLock again, just use the pid lock that already exists then.
Also, LockFile.PidLock.tryLock was deleting the pid lock when it failed
to take the lock, which was entirely wrong. It should only drop the side
lock.
Sponsored-by: Dartmouth College's Datalad project
This fixes a reversion introduced in commit
ac56a5c2a0.
I didn't notice there that it was handling the case of a shared lock
file that was still open elsewhere by not running the close action.
This was especially deadly when annex.pidlock is set, as it caused early
deletion of the pid lock file.
Sponsored-by: Dartmouth College's Datalad project
Commit b6e4ed9aa7 made non-annexed files
be re-uploaded every time, since they're not tracked in the location log,
and it made it check the location log. Don't do that for non-annexed files.
Sponsored-by: Brock Spratlen on Patreon
This version of git -- or its new default "ort" resolver -- handles such
a conflict by staging two files, one with the original name and the other
named file~ref. Use unmergedSiblingFile when the latter is detected.
(It doesn't do that when the conflict is between a directory and a file
or symlink though, so see previous commit for how that case is handled.)
The sibling file has to be deleted separately, because cleanConflictCruft
may not delete it -- that only handles files that are annex links,
but the sibling file may be the non-annexed file side of the conflict.
The graftin code had assumed that, when the other side of a conclict
is a symlink, the file in the work tree will contain the non-annexed
content that we want it to contain. But that is not the case with the new
git; the file may be the annex link and needs to be replaced with the
content, while the annex link will be written as a -variant file.
(The weird doesDirectoryExist check in graftin turns out to still be
needed, test suite failed when I tried to remove it.)
Test suite passes with new git with ort resolver default. Have not tried it
with old git or other defaults.
Sponsored-by: Noam Kremen on Patreon
This bug mostly would happen when the downloads ran very fast or were
all failing (how I reproduced it), because there have to be two
downloads that finish very close to the same time to trigger the race.
So most users of -J probably would not see much impact from the bug.
Bugfix: When -J was enabled, getting files leaked a ever-growing number of
git cat-file processes.
(Since commit dd39e9e255)
The leak happened when mergeState called stopNonConcurrentSafeCoProcesses.
While stopNonConcurrentSafeCoProcesses usually manages to stop everything,
there was a race condition where cat-file processes were leaked. Because
catFileStop modifies Annex.catfilehandles in a non-concurrency safe way,
and could clobber modifications made in between. Which should have been ok,
since originally catFileStop was only used at shutdown.
Note the comment on catFileStop saying it should only be used when nothing
else is using the handles. It would be possible to make catFileStop
race-safe, but it should just not be used in a situation where a race is
possible. So I didn't bother.
Instead, the fix is just not to stop any processes in mergeState. Because
in order for mergeState to be called, dupState must have been run, and it
enables concurrency mode, stops any non-concurrent processes, and so all
processes that are running are concurrency safea. So there is no need to
stop them when merging state. Indeed, stopping them would be extra work,
even if there was not this bug.
Sponsored-by: Dartmouth College's Datalad project
See comment for analysis.
At first I thought I'd need to convert all T.unpack in git-annex, but
luckily not -- so long as the Text is read from a file, the filesystem
encoding is applied and T.unpack is fine. It's only when using Feed
that the filesystem encoding is not applied.
While this fixes the crash, it does result in some mojibake, eg:
itemid=http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-���-questions/
Have not tracked that down, but it must be unrelated, because
I've verified that it roundtrips when using encodeUf8:
joey@darkstar:~/src/git-annex>LANG=C ghci Utility/FileSystemEncoding.hs
ghci> useFileSystemEncoding
ghci> Just f <- Text.Feed.Import.parseFeedFromFile "/home/joey/tmp/career_tools_podcasts.xml"
ghci> Just (_, x) = Text.Feed.Query.getItemId (Text.Feed.Query.feedItems f !! 0)
ghci> decodeBS (Data.Text.Encoding.encodeUtf8 x)
"http://www.manager-tools.com/2014/01/choosing-a-company-work-chapter-7-\56546\56448\56467-questions/"
ghci> writeFile "foo" $ decodeBS (Data.Text.Encoding.encodeUtf8 x)
Writes a file containing the ENDASH character.
Sponsored-by: Jochen Bartl on Patreon
While intended for converting URL keys added by addurl --fast to be
as if added by addurl --relaxed, it can also be used to remove size
from other types of keys. Although that is not likely to be useful
for checksummed keys, I suppose it could be used for WORM or other
non-checksum keys.
Specifying the --remove-size option does not prevent other migrations
from taking effect if there's a key upgrade to perform, or if the
backend has changed. So --backend=URL needs to be used to prevent
migrating an URL key to the default backend.
Note that it's not possible to use git-annex migrate to convert from a
non-URL key to an URL key, as URL keys cannot be generated, except by
addurl. So while this can get the same effect as --relaxed would have
when addurl --fast was used, when --fast was not used, it won't work, or
if --backend=URL is not used will remove the size but not prevent
checksum verification, which is not useful. Due to this complexity, I
decided not to mention it in the git-annex addurl man page.
Sponsored-by: Jochen Bartl on Patreon
git-lfs: Fix interoperability with gitlab's implementation of the git-lfs
protocol, which requests Content-Encoding chunked.
Sponsored-by: Dartmouth College's Datalad project
* uninit: Avoid error message when no commits have been made to the
repository yet.
* uninit: Avoid error message when there is no git-annex branch.
Sponsored-by: Svenne Krap on Patreon
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
metadata --batch --json: Reject input whose "fields" does not consist of
arrays of strings. Such invalid input used to be silently ignored.
Used to be that parseJSON for a JSONActionItem ran parseJSON separately
for the itemAdded, and if that failed, did not propagate the error. That
allowed different items with differently named fields to be parsed.
But it was actually only used to parse "fields" for metadata, so that
flexability is not needed.
The fix is just to parse "fields" as-is. AddJSONActionItemFields is needed
only because of the wonky way Command.MetaData adds onto the started json
object.
Note that this line got a dummy type signature added,
just because the type checker needs it to be some type.
itemFields = Nothing :: Maybe Bool
Since it's Nothing, it doesn't really matter what type it is,
and the value gets turned into json and is then thrown away.
Sponsored-by: Kevin Mueller on Patreon
Turns out that CommandStart actions do not have their exceptions caught,
which is why the giveup was causing a crash. Mostly these actions
do not do very much work on their own, but it does seem possible there
are other commands whose CommandStart also throws an exception.
So, my first attempt at a fix was to catch those exceptions. But,
--json-error-messages then causes a difficulty, because in order to output
a json error message, an action needs to have been started; that sets up
the json object that the error message will be included in a field of.
While it would be possible to output an object with just an error field,
this would be json output of a format that the user has no reason to
expect, that happens only in an exceptional circumstance. That is something
I have always wanted to avoid with the json output; while git-annex man
pages don't document what the json looks like, the output has always
been made to be self-describing. Eg, it includes "error-messages":[]
even when there's no errors.
With that ruled out, it doesn't seem a good idea to catch CommandStart
exceptions and display the error to stderr when --json-error-messages
is set. And so I don't know if it makes sense to catch exceptions from that
at all. Maybe I'd have a different opinion if --json-error-messages did not
exist though.
So instead, output a blank line like other batch commands do.
This also leaves open the possibility of implementing support for matching
object with metadata --json, which would also want to output a blank line
when the input didn't match.
Sponsored-by: Dartmouth College's DANDI project
addurl: Support adding the same url to multiple files at the same time when
using -J with --batch --with-files.
Implementation was easier than expected, was able to reuse OnlyActionOn.
While it will download the url's content multiple times, that seems like
the best thing to do; see my comment for why.
Sponsored-by: Dartmouth College's DANDI project
This opens the potential for the object file to be in place but
git-annex is interrupted before it can freeze it. git-annex fsck already
fixes that situation, which can also occur when lockContentForRemoval
thaws content.
Also improve comment to not be Windows-specific.
Caused by dirContains ".." "foo" being incorrectly False.
Also added a test of dirContains, which includes all the previous bug fixes
I could find and some obvious cases.
Reversion in version 8.20211011
Sponsored-by: Brett Eisenberg on Patreon
Fix bug that caused stale git-annex branch information to read when
annex.private or remote.name.annex-private is set.
The private journal file should not prevent reading more current
information from the git-annex branch, but used to.
Note that, overBranchFileContents has to do additional work now, when
there's a private journal file, it reads from the branch redundantly
and more slowly.
Sponsored-by: Jack Hill on Patreon
This removes a messy caveat that was easy to forget and caused at least one
bug. The price paid is that, after a write to a MultiWriter db, it has to
close the db connection that it had been using to read, and open a new
connection. So it might be a little bit slower. But, writes are usually
batched together, so there's often only a single write, and so there should
not be much of a slowdown. Notice that SingleWriter already closed the db
connection after a write, so paid the same overhead.
This is the second try at fixing a bug: git-annex get when run as the first
git-annex command in a new repo did not populate all unlocked files.
(Reversion in version 8.20210621)
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Rather than the error that occurred when trying to download the unchunked
content, which is less likely to actually be stored in the remote.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
git does not crash when there's a remote configured for a user who does
not exist, and this prevents git-annex from crashing too. Consider that
a user might exist on one system but not another, and the git repo be
moved between systems. So not crashing is desirable.
Note that git fetch seems to mishandle a remote path like ~foo/bar
when the user does not exist. While it does access ./~foo/bar,
and gets as far as running git-upload-pack on the path,
it then complains there is no such repo. So different parts of git seem
to be doing different things in that edge case. Anyway, git-annex does
not need to be bug-for-bug compatible with git.
Sponsored-by: Jack Hill on Patreon
test: Put gpg temp home directory in system temp directory, not filesystem
being tested.
Since I've found indications gpg can fail talking to the agent when the
socket ends up on eg, fat. And to hopefully fix this bug report I've
followed up on.
The main risk in using the system temp dir is that TMPDIR could be set to a
long directory path, which is too long to put a unix socket in. To
partially amelorate that risk, it uses either an absolute or a relative
path, whichever is shorter. (Hopefully gpg will not convert it to a longer
form of the path..)
If the user sets TMPDIR to something so long a path to it +
"S.gpg-agent" is too long, I suppose that's their issue to deal with.
Sponsored-by: Dartmouth College's Datalad project
This negotiation is not supported by versions of git-annex older
than 6.20180312. Well, maybe really 6.20180227 or so, but using that in
the changelog simplifies things since it was the version for the other
changes as well.
See commit c81768d425 for the back story.
As well as allowing for future protocol improvements, this will result
in negoatiating protocol version 1, which is an improvement over default
version 0.
In fact, it looks like no supported version of git-annex will use
protocol version 0, since version 1 was introduced in 6.20180227.
Still, removing the code for version 0 seems unncessary.
See commit 31e1adc005.
Sponsored-by: Brett Eisenberg on Patreon.
* Removed support for accessing git remotes that use versions of
git-annex older than 6.20180312.
* git-annex-shell: Removed several commands that were only needed to
support git-annex versions older than 6.20180312.
(lockcontent, recvkey, sendkey, transferinfo, commit)
The P2P protocol was added in that version, and used ever since, so
this code was only needed for interop with older versions.
"git-annex-shell commit" is used by newer git-annex versions, though
unnecessarily so, because the p2pstdio command makes a single commit at
shutdown. Luckily, it was run with stderr and stdout sent to /dev/null,
and non-zero exit status or other exceptions are caught and ignored. So,
that was able to be removed from git-annex-shell too.
git-annex-shell inannex, recvkey, sendkey, and dropkey are still used by
gcrypt special remotes accessed over ssh, so those had to be kept.
It would probably be possible to convert that to using the P2P protocol,
but it would be another multi-year transition.
Some git-annex-shell fields were able to be removed. I hoped to remove
all of them, and the very concept of them, but unfortunately autoinit
is used by git-annex sync, and gcrypt uses remoteuuid.
The main win here is really in Remote.Git, removing piles of hairy fallback
code.
Sponsored-by: Luke Shumaker
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
When the progress display gets longer, and then shorter again, it causes
the cursor to jitter back and forth. Somehow I never noticed this until
this morning, but then it became intolerable to watch.
To fix it, pad the progress display to the maximum length it's occupied.
Sponsored-by: Svenne Krap on Patreon
This adds the overhead of a copy whenever converting to/from ExportLocation and
ImportLocation.
borg: Some improvements to memory use when importing a lot of archives.
(It's still pretty bad.)
Sponsored-by: Mark Reidenbach on Patreon
Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
sync --content: Avoid a redundant checksum of a file that was
incrementally verified, when used on NTFS and perhaps other filesystems.
When sync has just gotten the content, it does not need to check inAnnex a
second time. On NTFS, for some reason the write of the inode cache after
it gets the content is not immediately able to be read, and with an
empty/non-matching inode cache due to that stale data, inAnnex falls back
to hashing the whole object to determine if it's present.
Sponsored-by: Brock Spratlen on Patreon
This method avoids breaking test_readonly. Just check if the dest file
exists, and avoid CoW probing when it does, so when CoW probing fails,
it can resume where the previous non-CoW copy left off.
If CoW has been probed already to work, delete the dest file
since a CoW copy will presumably work. It seems like it would be almost
as good to just skip CoW copying in this case too, but consider that the
dest file might have started to be copied from some other remote, not
using CoW, but CoW has been probed to work to copy from the current
place.
Sponsored-by: Dartmouth College's Datalad project
commit 63d508e885 broke test_readonly.
When a local git remote is readonly, tryCopyCoW run to copy a file
from it failed at withOtherTmp.
Sponsored-by: Dartmouth College's Datalad project
Disabling git-annex branch update for this command is
ok, because it does not use any information from the branch,
but only logs the location when it adds a key.
Sponsored-by: Dartmouth College's Datalad project
New method is much better. Avoids unrestrained transfer at the beginning
(except for the first block. Keeps right at or a few kb/s below the
configured limit, with very little varation in the actual reported bandwidth.
Removed the /s part of the config as it's not needed.
Ready to merge.
Sponsored-by: Luke Shumaker on Patreon
Bug fix: Git configs such as annex.verify were incorrectly overriding
per-remote git configs such as remote.name.annex-verify.
This dates all the way back to 2013,
commit 8a5b397ac4,
where hlint apparently somehow confused me into parsing in the wrong
order. Before that it was correct.
Amazing noone has noticed until now.
Sponsored-by: Kevin Mueller on Patreon
Probably this fixes a reversion, but I don't know what version broke it.
This does use withOtherTmp for a temp file that could be quite large.
Though albeit a reflink copy that will not actually take up any space
as long as the file it was copied from still exists. So if the copy cow
succeeds but git-annex is interrupted just before that temp file gets
renamed into the usual .git/annex/tmp/ location, there is a risk that
the other temp directory ends up cluttered with a larger temp file than
later. It will eventually be cleaned up, and the changes of this being
a problem are small, so this seems like an acceptable thing to do.
Sponsored-by: Shae Erisson on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
This should complete the fix started in
6329997ac4, fixing the actual cause of the
test suite failure this time.
Sponsored-by: Dartmouth College's Datalad project
* When downloading urls fail, explain which urls failed for which
reasons.
* web: Avoid displaying a warning when downloading one url failed
but another url later succeeded.
Some other uses of downloadUrl use urls that are effectively internal use,
and should not all be displayed to the user on failure. Eg, Remote.Git
tries different urls where content could be located depending on how the
remote repo is set up. Exposing those urls to the user would lead to wild
goose chases. So had to parameterize it to control whether it displays urls
or not.
A side effect of this change is that when there are some youtube urls
and some regular urls, it will try regular urls first, even if the
youtube urls are listed first. This seems like an improvement if
anything, but in any case there's no defined order of urls that it's
supposed to use.
Sponsored-by: Dartmouth College's Datalad project
And fail with an informative message.
I don't think ACLs can prevent removing the write bit, but I'm not sure,
so kept it mentioning them as a possibility.
Should git-annex lock also check if the write bits are able to be removed?
Maybe, but the case I know about with xattrs involves cp -a copying NFS
xattrs, and it's the copy of the file that is the problem. So when locking
a file, I guess it will not be the copy.
Sponsored-by: Dartmouth College's Datalad project
New --batch-keys option added to these commands: get, drop, move, copy, whereis
git-annex-matching-options had to be reworded since some of its options
can be used to match on keys, not only files.
Sponsored-by: Luke Shumaker on Patreon
It would be better if the Arbitrary instance avoided generating impossible
filenames like "foo/c:bar", but proably this is the only place that splits
the file from the directory and then uses the file without the directory..
At least on the quickcheck properties.
Sponsored-by: Svenne Krap on Patreon
This was unlikely to cause any problem, but it is unsightly to mention
normally hidden refs, and it might have done a bit of unnecessary work to
check that ref.
Sponsored-by: Noam Kremen on Patreon
And that should be all the special remotes supporting it on linux now,
except for in the odd edge case here and there.
Sponsored-by: Dartmouth College's DANDI project
Except when configuration makes curl be used. It did not seem worth
trying to tail the file when curl is downloading.
But when an interrupted download is resumed, it does not read the whole
existing file to hash it. Same reason discussed in
commit 7eb3742e4b76d1d7a487c2c53bf25cda4ee5df43; that could take a long
time with no progress being displayed. And also there's an open http
request, which needs to be consumed; taking a long time to hash the file
might cause it to time out.
Also in passing implemented it for git and external special remotes when
downloading from the web. Several others like S3 are within striking
distance now as well.
Sponsored-by: Dartmouth College's DANDI project
Added fileRetriever', which will let the remaining special remotes
eventually also support incremental verify.
Sponsored-by: Dartmouth College's DANDI project
It uses tailVerify to hash the file while it's being written.
This is able to sometimes avoid a separate checksum step. Although
if the file gets written quickly enough, tailVerify may not see it
get created before the write finishes, and the checksum still happens.
Testing with the directory special remote, incremental checksumming did
not happen. But then I disabled the copy CoW probing, and it did work.
What's going on with that is the CoW probe creates an empty file on
failure, then deletes it, and then the file is created again. tailVerify
will open the first, empty file, and so fails to read the content that
gets written to the file that replaces it.
The directory special remote really ought to be able to avoid needing to
use tailVerify, and while other special remotes could do things that
cause similar problems, they probably don't. And if they do, it just
means the checksum doesn't get done incrementally.
Sponsored-by: Dartmouth College's DANDI project
Simply feed each chunk in turn to the incremental verifier.
When resuming an interrupted retrieve, it does not do incremental
verification. That would need to read the file, up to the resume point,
and feed it to the incremental verifier. That seems easy to get wrong.
Also it would mean extra work done before the transfer can start. Which
would complicate displaying progress, and would perhaps not appear to the
user as if it was resuming from where it left off. Instead, in that
situation, return UnVerified, and let the verification be done in a
separate pass.
Granted, Annex.CopyFile does manage all that, but it's not complicated
by dealing with chunks too.
Sponsored-by: Dartmouth College's DANDI project
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
* Deal with clock skew, both forwards and backwards, when logging
information to the git-annex branch.
* GIT_ANNEX_VECTOR_CLOCK can now be set to a fixed value (eg 1)
rather than needing to be advanced each time a new change is made.
* Misuse of GIT_ANNEX_VECTOR_CLOCK will no longer confuse git-annex.
When changing a file in the git-annex branch, the vector clock to use is now
determined by first looking at the current time (or GIT_ANNEX_VECTOR_CLOCK
when set), and comparing it to the newest vector clock already in use in
that file. If a newer time stamp was already in use, advance it forward by
a second instead.
When the clock is set to a time in the past, this avoids logging with
an old timestamp, which would risk that log line later being ignored in favor
of "newer" line that is really not newer.
When a log entry has been made with a clock that was set far ahead in the
future, this avoids newer information being logged with an older timestamp
and so being ignored in favor of that future-timestamped information.
Once all clocks get fixed, this will result in the vector clocks being
incremented, until finally enough time has passed that time gets back ahead
of the vector clock value, and then it will return to usual operation.
(This latter situation is not ideal, but it seems the best that can be done.
The issue with it is, since all writers will be incrementing the last
vector clock they saw, there's no way to tell when one writer made a write
significantly later in time than another, so the earlier write might
arbitrarily be picked when merging. This problem is why git-annex uses
timestamps in the first place, rather than pure vector clocks.)
Advancing forward by 1 second is somewhat arbitrary. setDead
advances a timestamp by just 1 picosecond, and the vector clock could
too. But then it would interfere with setDead, which wants to be
overrulled by any change. So it could use 2 picoseconds or something,
but that seems weird. It could just as well advance it forward by a
minute or whatever, but then it would be harder for real time to catch
up with the vector clock when forward clock slew had happened.
A complication is that many log files contain several different peices of
information, and it may be best to only use vector clocks for the same peice
of information. For example, a key's location log file contains
InfoPresent/InfoMissing for each UUID, and it only looks at the vector
clocks for the UUID that is being changed, and not other UUIDs.
Although exactly where the dividing line is can be hard to determine.
Consider metadata logs, where a field "tag" can have multiple values set
at different times. Should it advance forward past the last tag?
Probably. What about when a different field is set, should it look at
the clocks of other fields? Perhaps not, but currently it does, and
this does not seems like it will cause any problems.
Another one I'm not entirely sure about is the export log, which is
keyed by (fromuuid, touuid). So if multiple repos are exporting to the
same remote, different vector clocks can be used for that remote.
It looks like that's probably ok, because it does not try to determine
what order things occurred when there was an export conflict.
Sponsored-by: Jochen Bartl on Patreon
git-annex get when run as the first git-annex command in a new repo did not
populate unlocked files. (Reversion in version 8.20210621)
I am not entirely happy with this, because I don't understand how
428c91606b caused the problem in the first
place, and I don't fully understand how skipping calling scanAnnexedFiles
during autoinit avoids the problem.
Kept the explicit call to scanAnnexedFiles during git-annex init,
so that when reconcileStaged is expensive, it can be made to run then,
rather than at some later point when the information is needed.
Sponsored-by: Brock Spratlen on Patreon
Eg, showImprecise 1 1.99 returned "1.1" rather than "2". The 9 rounded
upward to 10, and that was wrongly used as the decimal, rather than
carrying the 1.
Sponsored-by: Jack Hill on Patreon
An easy way to see this in action is to have an unlocked file, and touch the
object file.
While all code that compares inode caches for object files needs to be
prepared for this kind of problem and fall back to verification, having
fsck notice it and correct it is cheap (as long as fsck is being run
anyway) and ensures that if it happens for some unusual reason, there's a
way for the user to notice that it's happening.
Not that, when annex.thin is in use, the earlier call to isUnmodified
(and also potentially earlier calls to inAnnex in eg, verifyLocationLog)
will fix up the same problem silently. That might prevent the warning
being displayed, although probably it still will be, because the
Database.Keys write of the InodeCache will be queued but will not have
happened yet. I can't see a way to improve this, but it's not great.
Sponsored-by: Dartmouth College's Datalad project
This is a result of an audit of every use of getInodeCaches,
to find places that misbehave when the annex object is not in the inode
cache, despite pointer files for the same key being in the inode cache.
Unfortunately, that is the case for objects that were in v7 repos that
upgraded to v8. Added a note about this gotcha to getInodeCaches.
Database.Keys.reconcileStaged, then annex.thin is set, would fail to
populate pointer files in this situation. Changed it to check if the
annex object is unmodified the same way inAnnex does, falling back to a
checksum if the inode cache is not recorded.
Sponsored-by: Dartmouth College's Datalad project
Fix bug that caused some transfers to incorrectly fail with "content
changed while it was being sent", when the content was not changed.
While I don't know how to reproduce the problem that several people
reported, it is presumably due to the inode cache somehow being stale.
So check isUnmodified', and if it's not modified, include the file's
current inode cache in the set to accept, when checking for modification
after the transfer.
That seems like the right thing to do for another reason: The failure
says the file changed while it was being sent, but if the object file was
changed before the transfer started, that's wrong. So it needs to check
before allowing the transfer at all if the file is modified.
(Other calls to sameInodeCache or elemInodeCaches, when operating on inode
caches from the database, could also be problimatic if the inode cache is
somehow getting stale. This does not address such problems.)
Sponsored-by: Dartmouth College's Datalad project
Which is the same as the git merge option.
After last commit, this turns out to be needed in the test suite, and when
doing git-annex import from special remote, followed by a git-annex merge.
Sponsored-by: Svenne Krap on Patreon
sync, merge, post-receive: Avoid merging unrelated histories, which used to
be allowed only to support direct mode repositories.
(However, sync does still merge unrelated histories when importing trees
from special remotes, and the assistant still merges unrelated histories
always.)
See 556b2ded2b for why this was added
back in 2016, for direct mode.
This is a behavior change, which might break something that was relying
on sync merging unrelated histories, but git had a good reason to
prevent it, since it's easy to foot shoot with it, and git-annex should
follow suit.
Sponsored-by: Noam Kremen on Patreon
* sync: When --quiet is used, run git commit, push, and pull without
their ususual output.
* merge: When --quiet is used, run git merge without its usual output.
This might also make --quiet work better for some other commands
that make commits, like git-annex adjust.
Sponsored-by: Kevin Mueller on Patreon
It was making the borgrepo path absolute.. even when it was a ssh
repository.
Made BorgRepo a newtype, to guard against accidentially treating it like a
FilePath.
Sponsored-by: Graham Spencer on Patreon
Fix a bug that prevented getting content from a repository that started out
as a bare repository, or had annex.crippledfilesystem set, and was
converted to a non-bare repository.
This unfortunately means that inAnnex check gets slowed down by a stat call
in normal repos when the content is not present. Oh well, such is the cost
of backwards compatability with old mistakes.
Sponsored-by: Mark Reidenbach on Patreon
assistant: When adding non-large files to git, honor annex.delayadd
configuration.
Also, don't add non-large files to git when they are still
being written to. This came for free, since the changes to non-large
files get queued up with the ones to large files, and run through the lsof
check.
Sponsored-by: Luke Shumaker on Patreon
init: Fix misbehavior when core.sharedRepository = group that caused it to
enter an adjusted branch. (Reversion in version 8.20210630)
Commit 4b1b9d7a83 made init call
freezeContent in case there was a hook that could prevent writing in
situations where perms don't. But with the above git config, freezeContent
does not prevent write at all. So init needs to do what freezeContent does
with a non-shared git config.
Or init could check for that config, and skip the probing, since it
won't actually be preventing write to any files. But that would make init
too aware if details of Annex.Perms, and also would break if the git config
were changed after init.
Sponsored-by: Dartmouth College's Datalad project
In commit dfc4e641b5 git repair was changed
to use remote name, not url, when fetching. But it fetches into a temporary
git repo, which doesn't have remotes configured. Oops.
(In my defense, that commit was made just as covid lockdown started. But
testing? Urk.)
Sponsored-by: Mark Reidenbach on Patreon
Fixed bug that interrupting git-annex repair (or assistant) while it was
fixing repository corruption would lose objects that were contained in pack
files.
Unpack all pack files and move objects into place *before* deleting the
pack files. The old approach moved the pack files to a temp directory
before unpacking them, which was not interruption safe.
Sponsored-By: Jochen Bartl on Patreon
Forces eg, download with youtube-dl without falling back to raw download.
Since youtube-dl failing due to an url not being supported is difficult to
distinguish from it failing due to being blocked in some way, this can be
useful to avoid the fallback of git-annex downloading the raw web page and
adding that.
Since --raw also prevents using special remotes, --no-raw also
allows special remote downloads. Although it's always possible that some
special remote may claim an url and fall back to raw download of the
content, which --no-raw cannot prevent.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Dropping an object with drop --unused or dropunused will mark it as
dead, preventing fsck --all from complaining about it after it's been
dropped from all repositories.
If another repository still has a copy, it won't be treated as dead
until it's also dropped from there.
The drop has to use --unused, can't be --key or something else, because
this indicates that the user has recently ran git-annex unused. If it
checked the unused log on every drop, bad things would happen when the
unused log was out of date, eg a file used to be unused but then got
re-added. Marking such a file as dead could be confusing. When the user
uses --unused/dropunused, they must consider the unused information to be
up-to-date.
The particular workflow this enables is:
git annex add foo
git annex unannex foo
git annex unused
git annex drop --unused / dropunused
git annex fsck --all # no warnings
The docs for git-annex unannex say to use git-annex unused and dropunused,
so the user should be pointed in this direction when they want to undo an
accidental add.
Sponsored-by: Brock Spratlen on Patreon
Transfers from or to a local git repo could fail without a reason being
given, if the content failed to verify, or if the object file's stat
changed while it was being copied. Now display messages in these cases.
Sponsored-by: Jack Hill on Patreon
Freeze first sets the file perms, and then runs
freezecontent-command. Thaw runs thawcontent-command before
restoring file permissions. This is in case the freeze command
prevents changing file perms, as eg setting a file immutable does.
Also, changing file perms tends to mess up previously set ACLs.
git-annex init's probe for crippled filesystem uses them, so if file perms
don't work, but freezecontent-command manages to prevent write to a file,
it won't treat the filesystem as crippled.
When the the filesystem has been probed as crippled, the hooks are not
used, because there seems to be no point then; git-annex won't be relying
on locking annex objects down. Also, this avoids them being run when the
file perms have not been changed, in case they somehow rely on
git-annex's setting of the file perms in order to work.
Sponsored-by: Dartmouth College's Datalad project
sync: Partly work around github behavior that first branch to be pushed to
a new repository is assumed to be the head branch, by not pushing
synced/git-annex first.
github expects master (or whatever the name is) to be pushed first, but
git-annex sync can't, because it's got to also support pushes to non-bare
repos where pushing master fails, as explained in the big comment. So
pushing synced/master is not entirely a fix, but at least it makes github
default to a branch with the stuff the user expects in it, not a bunch of
annex log files.
Aside from fixing github to not make this assumption, or improving
the git push protocol to include what the current HEAD is, the only other
approach I can think of is to identify git push's progress messages and
display those when pushing master, while filtering out error messages
about non-fast-forward etc. But git doesn't provide a way to separate out
or identify its progress messages.
Sponsored-by: Luke Shumaker on Patreon
Eg, before with a .gitattributes like:
*.2 annex.numcopies=2
*.1 annex.numcopies=1
And foo.1 and foo.2 having the same content and key, git-annex drop foo.1 foo.2
would succeed, leaving just 1 copy, despite foo.2 needing 2 copies.
It dropped foo.1 first and then skipped foo.2 since its content was gone.
Now that the keys database includes locked files, this longstanding wart
can be fixed.
Sponsored-by: Noam Kremen on Patreon
Most of this is just refactoring. But, handleDropsFrom
did not verify that associated files from the keys db were still
accurate, and has now been fixed to.
A minor improvement to this would be to avoid calling catKeyFile
twice on the same file, when getting the numcopies and mincopies value,
in the common case where the same file has the highest value for both.
But, it avoids checking every associated file, so it will scale well to
lots of dups already.
Sponsored-by: Kevin Mueller on Patreon
This was an old problem when the files were being added unlocked,
so the changelog mentions that being fixed. However, recently it's also
affected locked files.
The fix for locked files is kind of stupidly simple. moveAnnex already
handles populating unlocked files, and only does it when the object file
was not already present. So remove the redundant populateUnlockedFiles
call. (That call was added all the way back in
cfaac52b88, and has always been
unncessary.)
Sponsored-by: Dartmouth College's Datalad project
When the log has an activity that is not known, eg added by a future
version of git-annex, it used to be treated as no activity at all,
which would make git-annex expire think it should expire the repository,
despite it having some kind of recent activity.
Hopefully there will be no reason to add a new activity until enough
time has passed that this commit is in use everywhere.
Sponsored-by: Jake Vosloo on Patreon
When this option is not used, there should be effectively no added
overhead, thanks to the optimisation in
b3cd0cc6ba.
When an action fails on a file, the size of the file still counts toward
the size limit. This was necessary to support concurrency, but also
generally seems like the right choice.
Most commands that operate on annexed files support the option.
export and import do not, and I don't know if it would make sense for
export to.. Why would you want an incomplete export? sync doesn't, and
while it would be easy to make it support it for transferring files,
it's not clear if dropping files should also take the size limit into
account. Commands like add that don't operate on annexed files don't
support the option either.
Exiting 101 not yet implemented.
Sponsored-by: Denis Dzyubenko on Patreon
The normalisation of filenames turns out to be the tricky part here,
because the associated files coming out of the keys db may look like
"./foo/bar" or "../bar". For the former to match a glob like "foo/*",
it needs to be normalised.
Note that, on windows, normalise "./foo/bar" = "foo\\bar"
which a glob like "foo/*" won't match. So the glob is matched a second
time, on the toInternalGitPath, so allowing the user to provide a glob
with the slashes in either direction. However, this still won't support
some wacky edge cases like the user providing a glob of "foo/bar\\*"
Sponsored-by: Dartmouth College's Datalad project
When two files have the same content, and a required content expression
matches one but not the other, dropping the latter file will fail as it
would also remove the content of the required file.
This will slow down drop (w/o --auto), dropunused, mirror, and move, by one
keys db lookup per file. But I did include an optimisation to avoid a
double db lookup in the drop --auto / sync --content case. I suspect that
dropunused could also use PreferredContentChecked True, but haven't
entirely thought it through and it's rarely used with enough files for the
optimisation to matter.
Sponsored-by: Dartmouth College's Datalad project
* drop: When two files have the same content, and a preferred content
expression matches one but not the other, do not drop the file.
* sync --content, assistant: Fix an edge case where a file that is not
preferred content did not get dropped.
The sync --content edge case is that handleDropsFrom loaded associated files
and used them without verifying that the information from the database was
not stale.
It seemed best to avoid changing --want-drop's behavior, this way when
debugging a preferred content expression with it, the files matched will
still reflect the expression. So added a note to the --want-drop documentation,
to make clear it may not behave identically to git-annex drop --auto.
While it would be possible to introspect the preferred content
expression to see if it matches on filenames, and only look up the
associated files when it does, it's generally fairly rare for 2 files to
have the same content, and the database lookup is already avoided when
there's only 1 file, so I did not implement that further optimisation.
Note that there are still some situations where the associated files
database does not get locked files recorded in it, which will prevent
this fix from working.
Sponsored-by: Dartmouth College's Datalad project
init: When annex.commitmessage is set, use that message for the commit
that creates the git-annex branch.
This will be used by filter-branch too, and it seems to make sense to let
annex.commitmessage affect it.
ghc 8.8.4 seems to have changed something that broke code that has been
successfully using forkProcess since 2012. Likely a change to GC internals.
Since forkProcess has never had clear documentation about how to
use it safely, avoid using it at all. Instead, when git-annex needs to
daemonize itself, re-run the git-annex command, in a new process group
and session.
This commit was sponsored by Luke Shumaker on Patreon.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
git-annex add was changed, when adding a small file, to remove the inode
cache for it. This is necessary to keep the recipe in
doc/tips/largefiles.mdwn for converting from annex to git working.
It also avoids bugs/case_where_using_pathspec_with_git-commit_leaves_s.mdwn
which the earlier try at this change introduced.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
fromkey: Create an unlocked file when used in an adjusted branch where the
file should be unlocked, or when configured by annex.addunlocked.
There is some overlap with code in Annex.Ingest, however it's not quite the
same because ingesting has a temp file with the content, where here the
content, if any, is in the annex object file. So it eg, makes sense for
Annex.Ingest to copy the execute mode of the content file, but it does not make
sense for fromkey to do that.
Also changed in passing to stage the file in git directly, rather than
using git add. One consequence of that is that if the file is gitignored,
it will still get added, rather than the old behavior:
The following paths are ignored by one of your .gitignore files:
ignored
hint: Use -f if you really want to add them.
hint: Turn this message off by running
hint: "git config advice.addIgnoredFile false"
git-annex: user error (xargs ["-0","git","--git-dir=.git","--work-tree=.","--literal-pathspecs","add","--"] exited 123)
That old behavior was a surprise to me, and so I consider it a bug, and doubt
anyone would have relied on it.
Note that, when on an --hide-missing branch, it is possible to fromkey a key
that is not present (needs --force). The annex link or pointer file still gets
written in this case. It doesn't seem to make any sense not to write it,
because then fromkey would not do anything useful in this case, and this way
the file can be committed and synced to master, and the branch re-adjusted to
hide the new missing file.
This commit was sponsored by Noam Kremen on Patreon.
Which could happen occasionally before when concurrency is enabled.
While not much of a problem when it did happen, better to avoid it. Also,
since it seems likely the gpg-agent sometimes fails in such a situation,
this makes it not happen when running a single git-annex command with
concurrency enabled.
This commit was sponsored by Jake Vosloo on Patreon.
I had been assuming that numcopies would be a larger or at most equal to
mincopies, so no need to check both. But users get confused and use configs
that don't really make sense, so make sure to handle mincopies being larger
than numcopies.
Also add something to the mincopies man page to discourage this
misconfiguration.
This commit was sponsored by Denis Dzyubenko on Patreon.
Which has otherwise been supported since 2019, but was missing from the
list of allowed repo-global configs.
Reordered the list to match the order in the git-annex-config man page, to
make them easy to cross-compare.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
* Fix bug that could make git-annex importfeed not see recently recorded
state when configured with annex.alwayscommit=false.
* importfeed: Made "checking known urls" phase run 12 times faster.
The massive speedup is because it no longer queries for metadata
accompanying each url. Instead it processes the whole git-annex branch and
checks all metadata files for feed item ids, and uses any it finds.
This could result in a behavior change, in an unlikely situation: If a feed
id is recorded in a key's metadata, but the url gets removed, the old code
would not see that item id and would re-download it if it finds an url for
it in a feed, while the new code will see the item id. I don't think
the old behavior was intentional, and it may be that the new behavior is
better. Not gonna worry about this.
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
When not using --all, precaching only gets triggered when the
command actually needs location logs, and so there's no speed hit there.
This is a minor speed hit for --all, because it precaches even when the
location log is not actually going to be used, and so checking the journal
is not necessary. It would have been possible to defer checking the journal
until the cache gets used. But that would complicate the usual Branch.get
code path with two different kinds of caches, and the speed hit is really
minimal. A better way to speed up --all, later, would be to avoid
precaching at all when the location log is not going to be used.
init: Fix a crash when the repo's was cloned from a repo that had an
adjusted branch checked out, and the origin remote is not named "origin".
The only other hardcoding of the name of origin is in:
- Upgrade.V2, which can be ignored probably
- Annex.Branch, which doesn't fail if it has some other name, but just
doesn't set up the git-annex branch with quite as linear a history in
that case.
directory: When cp supports reflinks, use it when getting content from a
directory special remote.
Not yet for imports from directory though, and not for store.
Note that, when it's chunked, using cp --reflink would not speed it up, and
when reflink was not supported, would unnecessarily write the chunk to a
file before reading it back in. So, only using a fileRetriever in the
NoChunks case is necessary to keep chunking fast.
fileCopier is told not to verify, because the special remote interface
does not yet support verification in passing. AFAICS, fileCopies can
never return False when not verifying so the added giveup should never
actually happen.
When downloading content from a remote, if the content is able to be
verified during the transfer, skip checksumming it a second time.
Note that in this case, the fsck output does not include "(checksum)"
which it does when the checksumming is done separately from the download.
This commit was sponsored by Brock Spratlen on Patreon.
When git-annex transferrer started up, and the journal contained something,
it would commit it to the git-annex branch. This caused excess commits to
the branch, in cases where normally several changes would be journalled and
committed together. That generated some excess git objects and was also
just noisy on stdout.
Since transferrer uses enableInteractiveBranchAccess, it does not need to
commit journalled changes, since the optimisation that avoids checking
the journal when reading from the branch is disabled for processes that
call that.
This commit was sponsored by Svenne Krap on Patreon.
persistent stopped using askLogFunc, and the thing to use is askLoggerIO
from monad-logger. Bumped the dep to the first version that contained that.
Note that the i386ancient build uses a newer monad-logger than 0.3.10,
so the new versioned dep should not break it, and presumably nothing else
either.
This commit was sponsored by Noam Kremen on Patreon.
Which generated unusual git trees that could confuse git merge,
since they incorrectly had 2 subtrees with the same name.
Root of the bug was a) not testing that at all! but also
b) confusing graftdirs, which contains eg "foo/bar" with
non-recursively read trees, which would contain eg "bar"
when reading a subtree of "foo".
It's worth noting that Annex.Import uses graftTree, but it really
shouldn't have needed to. Eg, when importing into foo/bar from a remote,
it's enough to generate a tree of foo/bar/x, foo/bar/y, and does not
include other files that are at the top of the master branch. It uses
graftTree, so it does include the other files, as well as the foo/bar
tree. git merge will do the same thing for both trees. With that said,
switching it away from graftTree would result in another import
generating a new commit that seems to delete files that were there in a
previous commit, so it probably has to keep using graftTree since it
used it before.
This commit was sponsored by Kevin Mueller on Patreon.
Note that a key with no size field that is hard linked will
result in listImportableContents reporting a file size of 0,
rather than the actual size of the file. One result is that
the progress meter when getting the file will seem to get stuck
at 100%. Another is that the remote's preferred content expression,
if it tries to match against file size, will treat it as an empty file.
I don't see a way to improve the latter behavior, and the former behavior
is a minor enough problem.
This commit was sponsored by Jake Vosloo on Patreon.
Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
It changed parseOnly in the ByteString.Lazy module to take a lazy, not
strict ByteString. In all these cases though, we actually had a strict
ByteString, so the most efficient fix, which also happens to avoid needing
ifdefs, is to use the non-lazy module instead.
This commit was sponsored by Denis Dzyubenko on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Can beet to false to avoid some expensive things needed to support unlocked
files.
See my comment for why this only controls what init sets up, and not other
behavior.
I didn't bother with making the v5 upgrade code path look at this, though
it easily could, because the docs say to run git-annex init after setting
it to make it take effect.
I don't think this was really intentional behavior. It may be that it was
useful to include it so it could be passed to rmurl, since without it rmurl
would not actually remove the url. Since that was changed earlier today,
now seems like a good time to clean up the display of these urls.
This commit was sponsored by Jochen Bartl on Patreon.
fsck: When --from is used in combination with --all or similar options, do
not verify required content, which can't be checked properly when operating
on keys.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
box.com already had a special case, since its renaming was known buggy.
In its case, renaming to the temp file succeeds, but then renaming the temp
file to final destination fails.
Then this 4shared server has buggy handling of renames across directories.
While already worked around with for the temp files when storing exports
now being in the same directory as the final filename, that also affected
renameExport when the file moves between directories.
I'm not entirely clear what happens on the 4shared server when it fails
this way. It kind of looks like it may rename the file to destination and
then still fail.
To handle both, when rename fails, delete both the source and the
destination, and fall back to uploading the content again. In the box.com
case, the temp file is the source, and deleting it makes sure the temp file
gets cleaned up. In the 4shared case, the file may have been renamed to the
destination and so cleaning that up avoids any interference with the
re-upload to the destination.
unregisterurl: Fix a bug that caused an url to not be unregistered when it
is claimed by a special remote other than the web.
See commit f175d4cc90 for rationalle.
