Transfers from or to a local git repo could fail without a reason being
given, if the content failed to verify, or if the object file's stat
changed while it was being copied. Now display messages in these cases.
Sponsored-by: Jack Hill on Patreon
moveAnnex only gets to that check if the object file was not present
before. So in the case where dup files are being added repeatedly,
it will only run the first time, and so there's no significant speedup
from doing it; all it avoids is a single sqlite lookup. Since MVar
accesses do have overhead, it's better to optimise for the common case,
where unlocked files are supported.
removeAnnex is less clear cut, but I think mostly is skipped running on
keys when the object has already been dropped, so similar reasoning
applies.
This will mostly just avoid a DB lookup, so things get marginally
faster. But in cases where there are many files using the same key, it
can be a more significant speedup.
Added overhead is one MVar lookup per call, which should be small
enough, since this happens after transferring or ingesting a file,
which is always a lot more work than that. It would be nice, though,
to move getGitConfig to AnnexRead, which there is an open todo about.
All callers adjusted to update it themselves.
In Command.ReKey, and Command.SetKey, the cleanup action already did,
so it was updating the log twice before.
This fixes a bug when annex.stalldetection is set, as now
Command.Transferrer can skip updating the location log, and let it be
updated by the calling process.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
This will let a module that Annex.Content imports use inAnnex.
Unsure yet if I will need that, but this split still seems to make
sense, and Annex.Content was way too long so splitting it is good.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
This was already prevented in other ways, but as seen in commit
c30fd24d91, those were a bit fragile.
And I'm not sure races were avoided in every case before. At least a
race between two separate git-annex processes, dropping the same
content, seemed possible.
This way, if locking fails, and the content is not present, it will
always do the right thing. Also, it avoids the overhead of an unncessary
inAnnex check for every file.
This commit was sponsored by Denis Dzyubenko on Patreon.
This is groundwork for external backends, but also makes sense to keep
this information with the rest of a Backend's implementation.
Also, removed isVerifiable. I noticed that the same information is
encoded by whether a Backend implements verifyKeyContent or not.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
using git credential to get the password
One thing this doesn't do is wrap the password prompting inside the prompt
action. So with -J, the output can be a bit garbled.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
No longer used. The only possible user of it would be code in
Upgrade.V5, so I verified that the parts of Annex.Content it used were
not used to manipulate direct mode files.
This means that Command.Move and Command.Get don't need to
manually set the stage, and is a lot cleaner conceptually.
Also, this makes Command.Sync.syncFile use the worker pool better.
In the scenario where it first downloads content and then uploads it to
some other remotes, it will start in TransferStage, then enter VerifyStage
and then go back to TransferStage for each transfer to the remotes.
Before, it entered CleanupStage after the download, and stayed in it for
the upload, so too many transfer jobs could run at the same time.
Note that, in Remote.Git, it uses runTransfer and also verifyKeyContent
inside onLocal. That has a Annex state for the remote, with no worker pool.
So the resulting calls to enteringStage won't block in there.
While Remote.Git.copyToRemote does do checksum verification, I
realized that should not use a verification slot in the WorkerPool
to do it. Because, it's reading back from eg, a removable disk to checksum.
That will contend with other writes to that disk. It's best to treat
that checksum verification as just part of the transer. So, removed the todo
item about that, as there's nothing needing to be done.
Rather than limiting it to PerformStage and CleanupStage, this opens it
up so any number of stages can be added as needed by commands.
Each concurrent command has a set of stages that it uses, and only
transitions between those can block waiting for a free slot in the
worker pool. Calling enteringStage for some other stage does not block,
and has very little overhead.
Note that while before the Annex state was duplicated on the first call
to commandAction, this now happens earlier, in startConcurrency.
That means that seek stage actions should that use startConcurrency
and then modify Annex state won't modify the state of worker threads
they then start. I audited all of them, and only Command.Seek
did so; prepMerge changes the working directory and so has to come
before startConcurrency.
Also, the remote list is built before duplicating the state, which means
that it gets built earlier now than it used to. This would only have an
effect of making commands that end up not needing to perform any actions
unncessary build the remote list (only when they're run with concurrency
enable), but that's a minor overhead compared to commands seeking
through the work tree and determining they don't need to do anything.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
downloadUrl uses meteredFile, which sets up one progress meter,
and Remote.Web also uses metered, so two progress meters are displayed for
the same download.
Reversion introduced with the http-conduit switch in
c34152777b -- I don't know why the extra
call to metered was added there.
When -J is not used, the extra progress meter didn't display,
but an extra blank line did get output, which is also fixed.
This commit was sponsored by John Pellman on Patreon.
dropunused: When an unused object file has gotten modified, eg due to
annex.thin being set, don't silently skip it, but display a warning and let
--force drop it.
This commit was sponsored by Ethan Aubin.
Should be redundant, but test suite is ending up with
a lot of extra sqlite connections before unused keys database handles
get garbage collected.
While running the test suite, I often saw 2-4+ open fds to the same
repo's keys database. After this change, it seems to mostly have 1,
occasionally 2.
And that might explain some of the strange sqlite failures in the test suite.
Especially the failures of test_lock_v7_force, where the keys database
gets renamed to a new directory out from under sqlite.
Cache high-resolution mtimes for improved detection of modified files in v7
(and direct mode).
Including on Windows.
With back-compat support so old low-res mtimes won't break anything, and
so the new information also won't break old versions of git-annex.
Usually, git won't run clean filter when a file is unmodified. But, when
git checkout runs git annex smudge --update, it populates the pointer
runs git update-index, which sees the file has changed and runs
git annex smudge --clean, which was checksumming the file unncessarily
as it re-ingested it.
With annex.thin set, this is the difference between git checkout of a
branch with a 1 gb file taking 30s and 0.1s.
This commit was sponsored by Brett Eisenberg on Patreon.
That could cause git-annex to get confused about whether a locked file's
content was present, when the object file got touched.
Unfortunately this means more work sometimes when annex.thin is set,
since it has to checksum the file to tell if it's still got the right
content.
Had to suppress output when inAnnex calls isUnmodified, otherwise
"(checksum...)" would be printed in places it ought not to be,
eg "git annex get" could turn out not need to get anything, and
so only display that.
This commit was sponsored by Ole-Morten Duesund on Patreon.
v6: Fix annex object file permissions when git-annex add is run on a
modified unlocked file, and in some related cases.
If a hard link is made, don't freeze it; annex.thin
uses writable object files.
Also: For some reason, linkToAnnex used to thawContent src. I can see no
reason why it needed to do that, so I eliminated that.
This commit was sponsored by Brock Spratlen on Patreon.
If a pointer file is being populated and something modifies it at the
same time, there was a race there the modified file's InodeCache
could get added into the keys database.
Note that replaceFile normally renames the temp file into place, so the
inode cache caculated for the temp file will still be good. If it has to
fall back to a copy, the worktree file won't be put in the inode cache.
This has the same result as if the worktree file gets touched, and will
be handled the same way. Eg, when dropping, isUnmodified will do an
expensive comparison and notice that the worktree file does have the
same content, and so drop it.
This commit was supported by the NSF-funded DataLad project.
Check just before running update-index if the worktree file's content is
still the same, don't update it when it's been modified. This narrows
the race window a lot, from possibly minutes or hours, to seconds or
less.
(Use replaceFile so that the worktree update happens atomically,
allowing the InodeCache of the new worktree file to itself be gathered
w/o any other race.)
This doesn't eliminate the race; it can still occur in the window before
update-index runs. When annex.queue is large, a lot of files will be
statted by the checks, and so the window may still be large enough to be a
problem.
When only a few files are being processed, the window is as small as it
is in the race where a modification gets overwritten by git-annex when
it updates the worktree. Or maybe as small as whatever race git
checkout/pull/merge may have when the worktree gets modified during it.
Still, I've kept a todo about this race.
This commit was supported by the NSF-funded DataLad project.
Use git update-index --refresh, since it's a little bit more
efficient and the user can be told to run it if a locked index prevents
git-annex from running it.
This also fixes the problem where an annexed file was deleted in the index
and a get of another file that uses the same key caused the index update to
add back the deleted file. update-index will not add back the deleted file.
Documented in tips/unlocked_files.mdwn the gotcha that the index update
may conflict with other operations. I can't see any way to possibly avoid
that conflict.
One new todo about a race that causes a modification to be accidentially
staged.
Note that the assistant only flushes the git command queue when it
commits a modification. I have not tested the assistant with v6 unlocked
files, but assume most users of the assistant won't care if the index
shows a file as modified for a while.
This commit was supported by the NSF-funded DataLad project.
After updating the worktree for an add/drop, update git's index, so git
status will not show the files as modified.
What actually happens is that the index update removes the inode
information from the index. The next git status (or similar) run
then has to do some work. It runs the clean filter.
So, this depends on the clean filter being reasonably fast and on git
not leaking memory when running it. Both problems were fixed in
a96972015d, but only for git 2.5. Anyone
using an older git will see very expensive git status after an add/drop.
This uses the same git update-index queue as other parts of git-annex, so
the actual index update is fairly efficient. Of course, updating the index
does still have some overhead. The annex.queuesize config will control how
often the index gets updated when working on a lot of files.
This is an imperfect workaround... Added several todos about new
problems this workaround causes. Still, this seems a lot better than the
old behavior.
This commit was supported by the NSF-funded DataLad project.
Added annex.commitmessage config that can specify a commit message for the
git-annex branch instead of the usual "update".
This commit was supported by the NSF-funded DataLad project.
No point in keeping an empty tmp workdir around.
The associated tmp object file is retained even if empty, didn't want to
deal with any possible races with something else downloading to that
file at the same time this would check if it's empty. Anyhow, temp
object files are normally retained, and this will get cleaned out the
same way those do, by dropunused.
