Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
It changed parseOnly in the ByteString.Lazy module to take a lazy, not
strict ByteString. In all these cases though, we actually had a strict
ByteString, so the most efficient fix, which also happens to avoid needing
ifdefs, is to use the non-lazy module instead.
This commit was sponsored by Denis Dzyubenko on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Can beet to false to avoid some expensive things needed to support unlocked
files.
See my comment for why this only controls what init sets up, and not other
behavior.
I didn't bother with making the v5 upgrade code path look at this, though
it easily could, because the docs say to run git-annex init after setting
it to make it take effect.
I don't think this was really intentional behavior. It may be that it was
useful to include it so it could be passed to rmurl, since without it rmurl
would not actually remove the url. Since that was changed earlier today,
now seems like a good time to clean up the display of these urls.
This commit was sponsored by Jochen Bartl on Patreon.
fsck: When --from is used in combination with --all or similar options, do
not verify required content, which can't be checked properly when operating
on keys.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
box.com already had a special case, since its renaming was known buggy.
In its case, renaming to the temp file succeeds, but then renaming the temp
file to final destination fails.
Then this 4shared server has buggy handling of renames across directories.
While already worked around with for the temp files when storing exports
now being in the same directory as the final filename, that also affected
renameExport when the file moves between directories.
I'm not entirely clear what happens on the 4shared server when it fails
this way. It kind of looks like it may rename the file to destination and
then still fail.
To handle both, when rename fails, delete both the source and the
destination, and fall back to uploading the content again. In the box.com
case, the temp file is the source, and deleting it makes sure the temp file
gets cleaned up. In the 4shared case, the file may have been renamed to the
destination and so cleaning that up avoids any interference with the
re-upload to the destination.
unregisterurl: Fix a bug that caused an url to not be unregistered when it
is claimed by a special remote other than the web.
See commit f175d4cc90 for rationalle.
* rmurl: When youtube-dl was used for an url, it no longer needs to be
prefixed with "yt:" in order to be removed.
* rmurl: If an url is both used by the web and also claimed by another
special remote, fix a bug that caused the url to to not be removed.
The youtube-dl change is a consequence of how the bug fix is implemented.
But I also think it's the right thing to do. Consider that, before,
git-annex addurl $url followed by git-annex rmurl $url would not remove the
url in the case where youtube-dl was used. That was surprising behavior.
In the unlikely case where a special remote claims an url, and it's been
added using OtherDownloader, but it was also added already as a web url,
it seems better for rmurl to remove both than to arbitrarily remove only one.
And in the case the bug report was filed for, when an url was added as a
web url, but a special remote now claims it, that should not prevent rmurl
removing the web url.
Calling setUrlMissing lets other callers of it behave differently.
Probably the calls to it in eg, Remote.External and Remote.BitTorrent are
fine, since they don't mangle the url and just remove what was provided,
and the OtherDownloader form of a bittorrent url, respectively.
I suspect unregisterurl needs to have a similar change made to rmurl, for
similar reasons.
When autoenabling special remotes of type S3, weddav, or glacier, do not
take login credentials from environment variables, as the user may not be
expecting the autoenable to happen, and may have those set for other
purposes.
Like import was using ActionItemWorkTreeFile, it's ok to use it for export,
even though it might not correspond with a file in the work tree.
And renamed it to ActionItemTreeFile to make that clearer.
Note that when an export has to rename files, it still uses
ActionItemOther, so file will still be null in that case, but as no file is
being transferred, that seems ok.
import: When the previously exported tree contained a submodule,
preserve it in the imported tree so it does not get deleted.
The export exclude log, which was used for non-preferred content,
now also includes the submodules. Since the log format is git ls-tree
output, this does not break backwards compatibility.
This mostly affects OSX and (possibly) Windows, but the Windows
installer does not bundle git. The linux standalone builds are not
updated yet pending debian stable getting a backport of the security
fix, but the security hole is unlikely to affect linux as
case-insensitive filesystems that support symlinks are a rarity on it.
Using the linux standalone build on windows via WSL is another way it
could be affected.
This commit was sponsored by Brett Eisenberg on Patreon.
Which access a remote using rsync over ssh, and which git pushes to much
more efficiently than ssh urls.
There was some old partial support for rsync URIs from 2013, but it seemed
incomplete, and did not use rsync over ssh. Weird.
I'm not sure if there's any remaining benefit to using the non-rsync url
forms with gcrypt, now that this is implemented? Updated docs to encourage
using the rsync urls.
This commit was sponsored by Svenne Krap on Patreon.
Git.Remote.parseRemoteLocation had a hack to handle URIs that contained
characters like spaces, which is something git unfortunately allows
despite not being a valid URI. However, that hack looked for "//" to
guess something was an URI, and these gcrypt URIs, being to a local
path, don't contain that. So instead escape all illegal characters and
check if the resulting thing is an URI.
And that was already done by Git.Construct.fromUrl, so
internally the gcrypt URI with a space looks like "gcrypt::foo%20bar"
and that needs to be de-escaped when converting back from URI to local
repo path.
This change might also allow a few other almost-valid URIs to be handled
as URIs by git-annex. None that contain "//" will change, and any
behavior change should result in git-annex doing closer to a right thing
than it did before, probably.
This commit was sponsored by Noam Kremen on Patreon.
Previously such nonsensical combinations always treated the matching option
as if it didn't match.
For now, made find --branch refuse matching options that need a
filename, because one is not provided to them in a way they'll use.
There's an open bug report to support it, but making it error out is
better than the old behavior of not finding what it was asked to.
Also, made --mimetype combined with eg --all work, by looking at the
object file when operating on keys.
Implemented by generalizing registerurl. Without the implicit batch mode
of registerurl since that is only a backwards compatability thing
(see commit 1d1054faa6).
unannex, uninit: When an annexed file is modified, don't overwrite the
modified version with an older version from the annex
This commit was sponsored by Mark Reidenbach on Patreon.
This benchmarks only slightly faster than the old git-annex. Eg, for a 1
gb file, 14.56s vs 15.57s. (On a ram disk; there would certianly be
more of an effect if the file was written to disk and didn't stay in
cache.)
Commenting out the updateIncremental calls make the same run in 6.31s.
May be that overhead in the implementation, other than the actual
checksumming, is slowing it down. Eg, MVar access.
(I also tried using 10x larger chunks, which did not change the speed.)
Changing to the P2P protocol broke this, because preseedTmp copies
the local copy of the object to the temp file, and then the P2P transfer
sees the right length file and uses it as-is.
When git-annex-shell is too old and rsync is used, it did verify the
content, and when the local repo does not have the object it did verify the
content.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
See my comment in the next commit for some details about why
Verified needs a hash with preimage resistance. As far as tahoe goes,
it's fully cryptographically secure.
I think that bup could also return Verified. However, the Retriever
interface does not currenly support that.
When a git remote is configured with an absolute path, use that path,
rather than making it relative. If it's configured with a relative path,
use that.
Git.Construct.fromPath changed to preserve the path as-is,
rather than making it absolute. And Annex.new changed to not
convert the path to relative. Instead, Git.CurrentRepo.get
generates a relative path.
A few things that used fromAbsPath unncessarily were changed in passing to
use fromPath instead. I'm seeing fromAbsPath as a security check,
while before it was being used in some cases when the path was
known absolute already. It may be that fromAbsPath is not really needed,
but only git-annex-shell uses it now, and I'm not 100% sure that there's
not some input that would cause a relative path to be used, opening a
security hole, without the security check. So left it as-is.
Test suite passes and strace shows the configured remote url is used
unchanged in the path into it. I can't be 100% sure there's not some code
somewhere that takes an absolute path to the repo and converts it to
relative and uses it, but it seems pretty unlikely that the code paths used
for a git remote would call such code. One place I know of is gitAnnexLink,
but I'm pretty sure that git remotes never deal with annex symlinks. If
that did get called, it generates a path relative to cwd, which would have
been wrong before this change as well, when operating on a remote.
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
annex.stalldetection can now be set to "true" to make git-annex do
automatic stall detection when it detects a remote is updating its transfer
progress consistently enough.
This commit was sponsored by Luke Shumaker on Patreon.
Seems only fair, that, like git runs git-annex, git-annex runs
git-annex-foo.
Implementation relies on O.forwardOptions, so that any options are passed
through to the addon program. Note that this includes options before the
subcommand, eg: git-annex -cx=y foo
Unfortunately, git-annex eats the --help/-h options.
This is because it uses O.hsubparser, which injects that option into each
subcommand. Seems like this should be possible to avoid somehow, to let
commands display their own --help, instead of the dummy one git-annex
displays.
The two step searching mirrors how git works, it makes finding
git-annex-foo fast when "git annex foo" is run, but will also support fuzzy
matching, once findAllAddonCommands gets implemented.
This commit was sponsored by Dr. Land Raider on Patreon.
I suspect this is a bug in cabal sdist, because with
Includes: Utility/libkqueue.h
the file is not included, but putting it in extra-files does
get it into the tarball.
Fix an oddity in matching options and preferred content expressions such as
"foo (bar or baz)", which was incorrectly handled as if it were "(foo or
bar) and baz)" rather than the intended "foo and (bar or baz)"
Seemed like a change to consume should be able to handle this case
better, but I was having trouble writing it that way, so instead added
a separate pass that inserts the implicit ands explicitly. Also added
several test cases to make sure versions with and without explicit ands
generate the same.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
Fixed that, and made parserLsTree accept the space as well as tab.
Fixes a reversion that made import of a tree from a special remote result in
a merge that deleted files that were not preferred content of that special
remote.
Avoids the smudge --clean filter failing because URL keys do not support
genKey. Instead the modified content will be added using the default
backend.
This commit was sponsored by Jochen Bartl on Patreon.
This avoids the smudge --clean filter failing on the URL keys.
git checkout runs the post-checkout hook, which runs smudge --update.
That populates all the pointer files, but it neglected to store their inode
caches in the keys db. With that done, and the keys db flushed before
smudge --clean gets run (by restagePointerFile), the isUnmodifiedCheap
check can tell the file is not modified, so will not try to re-ingest it,
which does not work with URL keys because they do not support genKey.
It also seems possible that the isUnmodifiedCheap was also failing for
non-URL keys, which would cause them to be re-ingested, leading to a lot of
extra work. I have not verified that, but don't see why it wouldn't have
happened. So this probably also speeds up checking out adjusted branches.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is probably a reversion, but not sure what caused it. By the time
Annex.Init runs fixupUnusualReposAfterInit, another git-annex process has
at least sometimes already done the necessary fixups. (Eg, one run
indirectly by a git command.) But since the Repo is cached, it doesn't
realize and does them again. So, avoid crashing when git config --unset
fails.
This commit was sponsored by Jack Hill on Patreon.
Directory special remotes with importtree=yes now avoid unncessary overhead
when inodes of files have changed, as happens whenever a FAT filesystem
gets remounted.
A few unusual edge cases of modifications won't be detected and
imported. I think they're unusual enough not to be a concern. It would
be possible to add a config setting that controls whether to compare
inodes too, but does not seem worth bothering the user about currently.
I chose to continue to use the InodeCache serialization, just with the
inode zeroed. This way, if I later change my mind or make it
configurable, can parse it back to an InodeCache and operate on it. The
overhead of storing a 0 in the content identifier log seems worth it.
There is a one-time cost to this change; all directory special remotes
with importtree=yes will re-hash all files once, and will update the
content identifier logs with zeroed inodes.
This commit was sponsored by Brett Eisenberg on Patreon.
Including the non-standard URI form that git-remote-gcrypt uses for rsync.
Eg, "ook://foo:bar" cannot be parsed because "bar" is not a valid port
number. But git could have a remote with that, it would try to run
git-remote-ook to handle it. So, git-annex has to allow for such things,
rather than crashing.
This commit was sponsored by Luke Shumaker on Patreon.
Since that can lead to data loss, which should never be enabled by an
option other than --force.
I suppose that using --trust was in some situation, safer than --force,
because it doesn't entirely disable checking for data loss, but only
disables checking involving data that is on the specified repository.
But it seems better to be able to say that data loss only happens with
--force.
This commit was sponsored by Graham Spencer on Patreon.
Since unconsidered use of trusted repositories can lead to data loss.
Trusted has always been this way, but it used to be acceptable for
git-annex to be set up so that data could be lost without using --force,
and most or all other ways that can happen have already been eliminated.
This commit was sponsored by Mark Reidenbach on Patreon.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
It got broken in several ways by the streaming seeking optimisations
around version 8.20201007.
Moved time limit checking out of the matcher, which was a hack in the
first place. So everywhere that uses Limit.getMatcher needs to check
time limit. Well, almost everywhere. Command.Info uses it, but it does
not make sense to time limit getting info. And Command.MultiCast uses it
just to build up a list of files that then get passed to a command, so
it would never have hit the timeout in a useful way.
This implementation is a little more expensive when at time limit than
necessary, since it continues seeking only to discard everything after the
time limit. I did try making it close the file handles to force a faster
shutdown, but that didn't work and hung. Could certianly be improved
somehow, but seeking is probably not the expensive bit when a time limit
is hit, so this seems acceptable for now.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
And vice-versa, but it's better to use '/' for portability.
Notably, standardPreferredContent contains "archive/*" and that might not
match if the filename ends up coming in with the slashes the other way
around.
I do think this was a reversion, but I have not tracked back to what
version. While involving the remote config, it's not the same class of
problems that I kept having to chase down for a while after the remote
config parser reworking.
This is common in some feeds, which might mix some items with enclosures,
with others that link to posts or whatever. Before this, it would try to
use youtube-dl and fail, or if youtube-dl was not allowed, it would
incorrectly complain that an url was supported by youtube-dl.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
* Guard against running in a repo where annex.uuid is set but
annex.version is set, or vice-versa.
* Avoid autoinit when a repo does not have annex.version or annex.uuid
set, but has a git-annex objects directory, suggesting it was used
by git-annex before.
There was no particular reason not to support this, other than maybe a lack
of a use case. One use case would of course be a remote that you want to
avoid overwriting content on. A new use case is the idea of importing from
backups, eg borg, where exporting is not necessarily supported at all.
This commit was sponsored by Brock Spratlen on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
Avoid spurious "verification of content failed" message when downloading
content from a ssh or tor remote fails due to the remote no longer having a
copy of the content.
The P2P protocol already handled this case by sending DATA 0, followed by
VALID. But VALID was not really right, because the data is not the
requested data. So, send DATA 0, followed by INVALID. Old versions of
git-annex handle INVALID the same as VALID in this case. Now new versions
avoid displaying an incorrect message.
It would be better for the P2P protocol to have a different way to indicate
this, like perhaps sending INVALID without DATA. But that would be a
breaking change and need a new protocol verison. Since INVALID already is
part of the protocol and already needs to be handled, using it for this
special case too seems ok, and avoids the complication of another protocol
version.
This commit was sponsored by Jochen Bartl on Patreon.
This is an edge case, which happened to be triggered by the P2P protocol
seeing DATA 0. When reading 0 bytes, getting an empty string does
not mean the handle has reached EOF.
I verified there was in fact a bug, where get of an empty file followed
by another file would get the empty file and then fail
with "handle is closed". This fixes it.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Reversion introduced in version 8.20201007, one release after the 1st
release with the extension.
Surprisingly, hClose can hang if another thread is reading from the
handle. This is because it uses takeMVar.
The use of cancel here does mean that, if receiveMessageAddonProcess
or Remote.External.AsyncExtension.receiveloop allocated some resource in
a non-async-exception safe way, they might not get a chance to clean it up.
They do not appear to, and anyway, this only happens when git-annex is
shutting down, so any recource that did leak would not be a problem.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Only displaying git-annex and git command output when something went wrong.
A few could still leak stderr. These include the couple of calls
to readProcess, which reads stdin but lets stderr through. But they don't
leak any usually, so probably only would when failing anyway.
Currently, there is no excess output at all!
This commit was sponsored by Brock Spratlen on Patreon.
Fix a bug that could make resuming a download from the web fail when the
entire content of the file is actually already present locally.
What a mess that Request can throw exceptions or not, depending on how
it's configured. Makes it very hard if you need to handle some specific
http status codes in a function like this! Implementing everything two
ways did not seem appealing, if possible at all, so I decided to
override the Request if it did come configured to throw exception on
non-2xx http status. Other exceptions, like from http-client-restricted,
or due to a redirect to a non-http url, still get thrown.
This commit was sponsored by Luke Shumaker on Patreon.
Prevent windows assistant from trying (and failing) to upgrade itself,
which has never been supported on windows.
The new windows build is made with UPGRADE_LOCATION set, which enabled this
code path that had never run on windows before, and doesn't work. I don't
want to try to support self-upgrade on windows, or generally on other OS's
than the ones where its working, so added a check for that. This way the
build can keep setting UPGRADE_LOCATION and if some later git-annex does
learn how to upgrade itself on some OS, it won't need changing the build
setup.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
An --unlock-present branch reverses back to a branch where
all files that get modified or renamed become locked, even if they were
originally unlocked. This is the same that reversing a --unlock branch
works, and the new name makes that commonality more clear.
