Seems only fair, that, like git runs git-annex, git-annex runs
git-annex-foo.
Implementation relies on O.forwardOptions, so that any options are passed
through to the addon program. Note that this includes options before the
subcommand, eg: git-annex -cx=y foo
Unfortunately, git-annex eats the --help/-h options.
This is because it uses O.hsubparser, which injects that option into each
subcommand. Seems like this should be possible to avoid somehow, to let
commands display their own --help, instead of the dummy one git-annex
displays.
The two step searching mirrors how git works, it makes finding
git-annex-foo fast when "git annex foo" is run, but will also support fuzzy
matching, once findAllAddonCommands gets implemented.
This commit was sponsored by Dr. Land Raider on Patreon.
The use case of this field is mostly to support -J combined with --json.
When that is implemented, a user will be able to look at the field to
determine which of the requests they have sent it corresponds to.
The field typically has a single value in its list, but in some cases
mutliple values (eg 2 command-line params) are combined together and the
list will have more.
Note that json parsing was already non-strict, so old git-annex metadata
--json --batch can be fed json produced by the new git-annex and will
not stumble over the new field.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
Rather than limiting it to PerformStage and CleanupStage, this opens it
up so any number of stages can be added as needed by commands.
Each concurrent command has a set of stages that it uses, and only
transitions between those can block waiting for a free slot in the
worker pool. Calling enteringStage for some other stage does not block,
and has very little overhead.
Note that while before the Annex state was duplicated on the first call
to commandAction, this now happens earlier, in startConcurrency.
That means that seek stage actions should that use startConcurrency
and then modify Annex state won't modify the state of worker threads
they then start. I audited all of them, and only Command.Seek
did so; prepMerge changes the working directory and so has to come
before startConcurrency.
Also, the remote list is built before duplicating the state, which means
that it gets built earlier now than it used to. This would only have an
effect of making commands that end up not needing to perform any actions
unncessary build the remote list (only when they're run with concurrency
enable), but that's a minor overhead compared to commands seeking
through the work tree and determining they don't need to do anything.
Fixes the last wart in the StartMessage transition. A few commands
include other CommandStart actions that generate output, and
do not themselves need to display a start/end message.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
And any other messages that might be output before a command starts.
Fixes a reversion introduced in version 5.20150727.
During the optparse-applicative conversion, I needed a place to run
per-command global option setters, and I made it get run during the seek stage. But
that is too late to have --json and --quiet disable output produced in the
check stage. Fix is just to run those per-command global option setters at
the same time as the all-command global option setters.
This commit was sponsored by Thom May.
This allows things like Command.Find to use noMessages and generate their
own complete json objects. Previouly, Command.Find managed that only via a
hack, which wasn't compatable with batch mode.
Only Command.Find, Command.Smudge, and Commange.Status use noMessages
currently, and none except for Command.Find are impacted by this change.
Fixes find --json --batch output
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
Option parsing for commands that run outside git repos is still screwy,
as there is no Annex monad and so the flags cannot be passed in. But,
any remaining parameters can be, which is enough for this fix.
