This fixes the recent reversion that annex.verify is not honored,
because retrieveChunks was passed RemoteVerify baser, but baser
did not have export/import set up.
Sponsored-by: Dartmouth College's DANDI project
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
All callers adjusted to update it themselves.
In Command.ReKey, and Command.SetKey, the cleanup action already did,
so it was updating the log twice before.
This fixes a bug when annex.stalldetection is set, as now
Command.Transferrer can skip updating the location log, and let it be
updated by the calling process.
This is to avoid breakage when upgrading or downgrading git-annex with a
process running that uses the interface. It's better to keep the
compatability code for a few years than worry about such breakage.
This commit was sponsored by Brett Eisenberg on Patreon.
Seems to work! Even progress bars. Have not tested prompting or various
error message displays yet.
transferkeys had to be made to operate in different modes for the
Assistant and Annex monads. A bit ugly, but it did relegate that
really ugly Database.Keys.closeDb in transferkeys to only the assistant
code path.
This commit was sponsored by Noam Kremen.
This is groundwork for using git-annex transferkeys to run transfers,
in order to allow stalled transfers to be interrupted and retried.
The new upload and download are closer to what git-annex transferkeys
does, so the plan is to make them use it.
Then things that were left using upload' and download' won't recover
from stalls. Notably, that includes import and export. But
at least get/move/copy will be able to. (Also the assistant hopefully,
but not yet.)
This commit was sponsored by Jake Vosloo on Patreon.
That seems to be the last thing needed for message serialization.
Although it's only used in the assistant currently, so hard to tell if I
forgot something.
At this point, it should be possible to start using transferkeys
when performing transfers, which will allow killing a transferkeys
process if a transfer times out or stalls. But that's for another day.
This commit was sponsored by Ethan Aubin.
Necessarily threw out the old protocol, so if an old git-annex assistant
is running, and starts a transferkeys from the new git-annex, it would
fail. But, that seems unlikely; the assistant starts up transferkeys
processes and then keeps them running. Still, may need to test that
scenario.
The new protocol is simple read/show and looks like this:
TransferRequest Download (Right "origin") (Key {keyName = "f8f8766a836fb6120abf4d5328ce8761404e437529e997aaa0363bdd4fecd7bb", keyVariety = SHA2Key (HashSize 256) (HasExt True), keySize = Just 30, keyMtime = Nothing, keyChunkSize = Nothing, keyChunkNum = Nothing}) (AssociatedFile (Just "foo"))
TransferOutput (ProgressMeter (Just 30) (MeterState {meterBytesProcessed = BytesProcessed 0, meterTimeStamp = 1.6070268727892535e9}) (MeterState {meterBytesProcessed = BytesProcessed 30, meterTimeStamp = 1.6070268728043e9}))
TransferOutput (OutputMessage "(checksum...) ")
TransferResult True
Granted, this is not optimally fast, but it seems good enough, and is
probably nearly as fast as the old protocol anyhow.
emitSerializedOutput for ProgressMeter is not yet implemented. It needs
to somehow start or update a progress meter. There may need to be a new
message that allocates a progress meter, and then have ProgressMeter
update it.
This commit was sponsored by Ethan Aubin
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
The cache was removed way back in 2012,
commit 3417c55189
Then I forgot I had removed it! I remember clearly multiple times when I
thought, "this reads the same data twice, but the cache will avoid that
being very expensive".
The reason it was removed was it messed up the assistant noticing when
other processes made changes. That same kind of problem has recently
been addressed when adding the optimisation to avoid reading the journal
unnecessarily.
Indeed, enableInteractiveJournalAccess is run in just the
right places, so can just piggyback on it to know when it's not safe
to use the cache.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
The only price paid is one additional MVar read per write to the journal.
Presumably writing a journal file dominiates over a MVar read time by
several orders of magnitude.
--batch does not get the speedup because then it needs to notice when
another process has made a change. Also made the assistant and other damon
modes bypass the optimisation, which would not help them anyway.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
This should make == comparison of UUIDs somewhat faster, and perhaps a
few other operations around maps of UUIDs etc.
FromUUID/ToUUID are used to convert String, which is still used for all
IO of UUIDs. Eventually the hope is those instances can be removed,
and all git-annex branch log files etc use ByteString throughout, for a
real speed improvement.
Note the use of fromRawFilePath / toRawFilePath -- while a UUID usually
contains only alphanumerics and so could be treated as ascii, it's
conceivable that some git-annex repository has been initialized using
a UUID that is not only not a canonical UUID, but contains high unicode
or invalid unicode. Using the filesystem encoding avoids any problems
with such a thing. However, a NUL in a UUID seems extremely unlikely,
so I didn't use encodeBS / decodeBS to avoid their extra overhead in
handling NULs.
The Read/Show instance for UUID luckily serializes the same way for
ByteString as it did for String.
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Leveraged the existing verification code by making it also check the
retrievalSecurityPolicy.
Also, prevented getViaTmp from running the download action at all when the
retrievalSecurityPolicy is going to prevent verifying and so storing it.
Added annex.security.allow-unverified-downloads. A per-remote version
would be nice to have too, but would need more plumbing, so KISS.
(Bill the Cat reference not too over the top I hope. The point is to
make this something the user reads the documentation for before using.)
A few calls to verifyKeyContent and getViaTmp, that don't
involve downloads from remotes, have RetrievalAllKeysSecure hard-coded.
It was also hard-coded for P2P.Annex and Command.RecvKey,
to match the values of the corresponding remotes.
A few things use retrieveKeyFile/retrieveKeyFileCheap without going
through getViaTmp.
* Command.Fsck when downloading content from a remote to verify it.
That content does not get into the annex, so this is ok.
* Command.AddUrl when using a remote to download an url; this is new
content being added, so this is ok.
This commit was sponsored by Fernando Jimenez on Patreon.
Added annex.retry, annex.retry-delay, and per-remote versions to configure
transfer retries.
This commit was supported by the NSF-funded DataLad project.
This was disabled in commit 61ccf95004,
because only the assistant used them, and they were clutter. But, now
--failed also uses them.
Remove the failure log files after successful transfers. Should avoid
most of the clutter problems.
Commit 61ccf95004 mentions a subtle behavior
change, which has now been reverted:
There is one behavior change from this. If glacier is being used, and a
manual git annex get --from glacier fails because the file isn't available
yet, the assistant will no longer later see that failed transfer file and
retry the get.
The keys database handle needs to be closed after merging, because the
smudge filter, in another process, updates the database. Old cached info
can be read for a while from the open database handle; closing it ensures
that the info written by the smudge filter is available.
This is pretty horribly ad-hoc, and it's especially nasty that the
transferrer closes the database every time.
* When annex objects are received into git repositories, their checksums are
verified then too.
* To get the old, faster, behavior of not verifying checksums, set
annex.verify=false, or remote.<name>.annex-verify=false.
* setkey, rekey: These commands also now verify that the provided file
matches the key, unless annex.verify=false.
* reinject: Already verified content; this can now be disabled by
setting annex.verify=false.
recvkey and reinject already did verification, so removed now duplicate
code from them. fsck still does its own verification, which is ok since it
does not use getViaTmp, so verification doesn't happen twice when using fsck
--from.
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
Only the assistant uses these, and only the assistant cleans them up, so
make only git annex transferkeys write them,
There is one behavior change from this. If glacier is being used, and a
manual git annex get --from glacier fails because the file isn't available
yet, the assistant will no longer later see that failed transfer file and
retry the get. Hope no-one depended on that old behavior.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
Note that TransferInfo does not always contain the Remote, although
any transfer added to the TransferQueue does have a Remote in its
TransferInfo. The transferkeys command still accepts a UUID, which is
useful to handle upgrades, where an old assistant version runs the new
transferkeys.
This commit was sponsored by Kalle Svensson.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
transferkeys had used special FDs for communication, but that would be
quite annoying to do in Windows.
Instead, use stdin and stdout. But, to avoid commands like rsync stomping
on them and messing up the communications channel, they're duplicated to a
different handle; stdin is replaced with a null handle, and stdout is
replaced with a copy of stderr. This should all work in windows too.
Stopping in progress transfers may work on windows.. if the types unify
anyway. ;) May need some more porting.
Most remotes have meters in their implementations of retrieveKeyFile
already. Simply hooking these up to the transfer log makes that information
available. Easy peasy.
This is particularly valuable information for encrypted remotes, which
otherwise bypass the assistant's polling of temp files, and so don't have
good progress bars yet.
Still some work to do here (see progressbars.mdwn changes), but this
is entirely an improvement from the lack of progress bars for encrypted
downloads.
