Fix a crash opening sqlite databases when run in a non-unicode locale,
with a remote that uses a non-unicode filepath. In that situation
converting to Text fails.
The fix needs git-annex to be built with persistent-sqlite 2.13.3.
Building against older versions still works, but that version is used when
building with stack.
Database.RawFilePath is a lot of code copied from persistent-sqlite and
lightly modified, since only 1 function in persistent-sqlite was made to
support RawFilePath. This is a bit of a pain, and I hope that
persistent-sqlite will eventually switch to using OsPath, allowing this
module to be removed from git-annex.
Sponsored-by: k0ld on Patreon
Currently it only displays explanations of options like --in and --copies.
In the future, it should explain preferred content expression evaluation
and other decisions.
The explanations of a few things could be better. In particular,
"standard" will just appear as-is (or as "!standard" if it doesn't
match), rather than explaining why the standard preferred content expression
for the group matches or not.
Currently as implemented, it goes to stdout, and so commands like
git-annex find that have custom output will not display --explain
information. Perhaps that should change, dunno.
Sponsored-by: Dartmouth College's DANDI project
There's still a 60 second delay in this situation because it retries,
in case the failure was due to something recoverable like another
process.
Sponsored-by: unqueued on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
Old message was:
sqlite query crashed: thread blocked indefinitely in an MVar operation
New message is eg:
sqlite worker thread crashed: SQLite3 returned ErrorCan'tOpen while attempting to perform open ".git/annex/keysdb/db".
The worker thread used to throw an exception. But before that
exception was seen by anything waiting on the worker thread to
finish, the takeMVar in queryDb would have crashed with
BlockedIndefinitelyOnMVar.
Sponsored-by: k0ld on Patreon
While ErrorBusy and other exceptions were caught and the write retried for
up to 10 seconds, it was still possible for git-annex to eventually
give up and error out without writing to the database. Now it will retry
as long as necessary.
This does mean that, if one git-annex process is suspended just as sqlite
has locked the database for writing, another git-annex that tries to write
it it might get stuck retrying forever. But, that could already happen when
opening the sqlite database, which retries forever on ErrorBusy. This is an
area where git-annex is known to not behave well, there's a todo about the
general case of it.
Sponsored-by: Dartmouth College's Datalad project
Help the user get annex.dbdir configured when their filesystem is not
one that sqlite works on.
The change in Database.Handle makes an error from sqlite not be ignored
besides being displayed, which it was before. I can't see any reason
git-annex would want to ignore these errors.
I chose to use the fsck database rather than the keys database because
opening the keys database populates it, and see commit
b3c4579c79.
The placement of the call to checkSqliteWorks inside checkInitializeAllowed
avoids annex.uuid getting set before it's called.
Sponsored-by: Dartmouth College's Datalad project
to track down a blocked indefinitely on MVar that seems to occur after
sqlite throws ErrorBusy but that I have not been able to reproduce when
I made commits synthetically throw ErrorBusy.
Sponsored-by: Dartmouth College's Datalad project
This is a potentially breaking change in a very delicate area. However,
examining the code path for writes, I don't see any benefit to opening a
second db connection for them. If the write throws an exception,
commitDb will retry it with a new db connection.
A potential benefit to not opening a second db connection, beyond using
less resources, is it just might avoid problems in WSL with sqlite that
I have hypothesized are caused by multiple db connections.
Commit 5f9eff3f32 explains why it needs to
shut down the db connection to force the database to be updated on disk:
When closeDb does not get called, garbage collection of DbHandle may not
give the workterThread time to cleanly shut down before git-annex exits,
resulting in a recently written change not reaching disk.
After commit f4bdecc4ec, there is no
longer any distinction between SingleWriter and MultiWriter's handling
of read after write.
Databases that were SingleWriter still have lock files that are used to
prevent multiple writers.
This does make writing to such databases a bit more expensive,
because the MultiWriter code path that is now used opens a second db
connection in order to write to them.
This removes a messy caveat that was easy to forget and caused at least one
bug. The price paid is that, after a write to a MultiWriter db, it has to
close the db connection that it had been using to read, and open a new
connection. So it might be a little bit slower. But, writes are usually
batched together, so there's often only a single write, and so there should
not be much of a slowdown. Notice that SingleWriter already closed the db
connection after a write, so paid the same overhead.
This is the second try at fixing a bug: git-annex get when run as the first
git-annex command in a new repo did not populate all unlocked files.
(Reversion in version 8.20210621)
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
persistent stopped using askLogFunc, and the thing to use is askLoggerIO
from monad-logger. Bumped the dep to the first version that contained that.
Note that the i386ancient build uses a newer monad-logger than 0.3.10,
so the new versioned dep should not break it, and presumably nothing else
either.
This commit was sponsored by Noam Kremen on Patreon.
Had a report of close throwing ErrorBusy on CIFS.
Retrying up to 16 seconds is a balance between hopefully waiting long
enough for the problem to clear up and waiting so long that git-annex seems
to hang.
The new dependency is free; persistent depends on unliftio-core.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
I suspect this may be due to SQLITE_IOERR_SHORT_READ, but have not
verified.
I was able to reproduce it on Linux after running the test suite in a loop
for 1-3 hours until it failed.
The WAL mode entry change in 3963c5fcf5
may have hidden the problem I was seeing; I have not seen an ErrorIO
since then.
The bug occurred when closeDb was not called, and garbage collection of
the DbHandle didn't give the workerThread time to shut down. Fixed by
exiting the runSqlite action when a commit is made.
(MultiWriter mode already forked off a runSqlite action, so avoided the
problem.)
This commit was sponsored by Brock Spratlen on Patreon.
The export database has writes made to it and then expects to read back
the same data immediately. But, the way that Database.Handle does
writes, in order to support multiple writers, makes that not work, due
to caching issues. This resulted in export re-uploading files it had
already successfully renamed into place.
Fixed by allowing databases to be opened in MultiWriter or SingleWriter
mode. The export database only needs to support a single writer; it does
not make sense for multiple exports to run at the same time to the same
special remote.
All other databases still use MultiWriter mode. And by inspection,
nothing else in git-annex seems to be relying on being able to
immediately query for changes that were just written to the database.
This commit was supported by the NSF-funded DataLad project.
Refactored some common code into initDb.
This only deals with the problem when creating new databases. If a repo
got bad permissions into it, it's up to the user to deal with it.
This commit was sponsored by Ole-Morten Duesund on Patreon.
hSetEncoding of a closed handle segfaults.
https://ghc.haskell.org/trac/ghc/ticket/71618484c0c197 introduced the crash.
In particular, stdin may get closed (by eg, getContents) and then trying
to set its encoding will crash. We didn't need to adjust stdin's
encoding anyway, but only stderr, to work around
https://github.com/yesodweb/persistent/issues/474
Thanks to Mesar Hameed for assistance related to reproducing this bug.
Writes are optimised by queueing up multiple writes when possible.
The queue is flushed after the Annex monad action finishes. That makes it
happen on program termination, and also whenever a nested Annex monad action
finishes.
Reads are optimised by checking once (per AnnexState) if the database
exists. If the database doesn't exist yet, all reads return mempty.
Reads also cause queued writes to be flushed, so reads will always be
consistent with writes (as long as they're made inside the same Annex monad).
A future optimisation path would be to determine when that's not necessary,
which is probably most of the time, and avoid flushing unncessarily.
Design notes for this commit:
- separate reads from writes
- reuse a handle which is left open until program
exit or until the MVar goes out of scope (and autoclosed then)
- writes are queued
- queue is flushed periodically
- immediate queue flush before any read
- auto-flush queue when database handle is garbage collected
- flush queue on exit from Annex monad
(Note that this may happen repeatedly for a single database connection;
or a connection may be reused for multiple Annex monad actions,
possibly even concurrent ones.)
- if database does not exist (or is empty) the handle
is not opened by reads; reads instead return empty results
- writes open the handle if it was not open previously
Fsck can use the queue for efficiency since it is write-heavy, and only
reads a value before writing it. But, the queue is not suited to the Keys
database.
If a DbHandle is in use by another thread, it could be queueing changes
while shutdown is running. So, wait for the worker to finish before
flushing the queue, so that any last-minute writes are included. Before
this fix, they would be silently dropped.
Of course, if the other thread continues to try to use a DbHandle once it's
closed, it will block forever as the worker is no longer reading from the
jobs MVar. So, that would crash with
"thread blocked indefinitely in an MVar operation".
Also, moved the database to a subdir, as there are multiple files.
This seems to work well with concurrent fscks, although they still do
redundant work due to the commit granularity. Occasionally two writes will
conflict, and one is then deferred and happens later.
Except, with 3 concurrent fscks, I got failures:
git-annex: user error (SQLite3 returned ErrorBusy while attempting to perform prepare "SELECT \"fscked\".\"key\"\nFROM \"fscked\"\nWHERE \"fscked\".\"key\" = ?\n": database is locked)
Argh!!!
Still not robust enough. I have 3 fscks running concurrently, and am
seeing:
("commit deferred",user error (SQLite3 returned ErrorBusy while attempting
to perform step.))
and
git-annex: user error (SQLite3 returned ErrorBusy while attempting to perform prepare "SELECT \"fscked\".\"key\"\nFROM \"fscked\"\nWHERE \"fscked\".\"key\" = ?\n": database is locked)
Sqlite doesn't support multiple concurrent writers
at all. One of them will fail to write. It's not even possible to have two
processes building up separate transactions at the same time. Before using
sqlite, incremental fsck could work perfectly well with multiple fsck
processes running concurrently. I'd like to keep that working.
My partial solution, so far, is to make git-annex buffer writes, and every
so often send them all to sqlite at once, in a transaction. So most of the
time, nothing is writing to the database. (And if it gets unlucky and
a write fails due to a collision with another writer, it can just wait and
retry the write later.) This lets multiple processes write to the database
successfully.
But, for the purposes of concurrent, incremental fsck, it's not ideal.
Each process doesn't immediately learn of files that another process has
checked. So they'll tend to do redundant work.
Only way I can see to improve this is to use some other mechanism for
short-term IPC between the fsck processes. Not yet done.
----
Also, make addDb check if an item is in the database already, and not try
to re-add it. That fixes an intermittent crash with
"SQLite3 returned ErrorConstraint while attempting to perform step."
I am not 100% sure why; it only started happening when I moved write
buffering into the queue. It seemed to generally happen on the same file
each time, so could just be due to multiple files having the same key.
However, I doubt my sound repo has many duplicate keys, and I suspect
something else is going on.
----
Updated benchmark, with the 1000 item queue: 6m33.808s
