This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
Work around bug in git 2.37 that causes a segfault when when
core.untrackedCache is set, and broke git-annex init.
Depending on when git gets fixed and how widely the buggy versions are
used, this could be reverted quite soon, or need to linger for a long time.
It only makes git-annex init a tiny bit slower in a new repo.
Sponsored-by: Max Thoursie on Patreon
I would like for a new repo version to enable appends, but to do so
safely would need a v11 followed by a 1 year delay followed by a v12
that does it. Since a similar v9 and v10 transition is currently
happening, and is less than 6 months along in most repos, it does not
feel wise to stack up another year-long transition behind that. What if
I need to hurry up a new repo version for some other change?
Added todo so I remember to make this change at some time when a v11
and probably v12 repo version do make sense.
Sponsored-by: Dartmouth College's DANDI project
This reverts commit 2e6e9876e3.
This is gonna be needed after all.. The append will only be atomic if
the journal is locked, because the file being appended will have to be
moved out of the way to avoid an old version of git-annex seeing an
incomplete write to it. When git-annex finds that the file is not in the
journal, and checks the append location, locking will be needed to avoid
a race causing it to miss it in the append location too due to it being
moved back to the journal.
Added annex.alwayscompact setting which can be unset to speed up writes to
the git-annex branch in some cases.
Sponsored-by: Dartmouth College's DANDI project
This reverts commit 47358a6f95.
This added overhead, and will not be needed, because appends are going
to have to be made atomic for other reasons than avoiding incomplete
reads of data being appended.
In particular, when git-annex is interrupted in the middle of an append,
it must not leave the file with a partially written line. So appending
has to somehow be made fully atomic.
Currently this is not an improvement, but it allows for optimising
appendJournalFile later. With an optimised appendJournalFile, this will
greatly speed up access patterns like git-annex addurl of a lot of urls
to the same key, where the log file can grow rather large. Appending
rather than re-writing the journal file for each line can save a lot of
disk writes.
It still has to read the current journal or branch file, to check
if it can append to it, and so when the journal file does not exist yet,
it can write the old content from the branch to it. Probably the re-reads
are better cached by the filesystem than repeated writes. (If the
re-reads turn out to keep performance bad, they could be eliminated, at
the cost of not being able to compact the log when replacing old
information in it. That could be enabled by a switch.)
While the immediate need is to affect addurl writes, it was implemented
at the level of presence logs, so will also perhaps speed up location logs.
The only added overhead is the call to isNewInfo, which only needs to
compare ByteStrings. Helping to balance that out, it avoids compactLog
when it's able to append.
Sponsored-by: Dartmouth College's DANDI project
This is not currently necessary; journal files are updated atomically.
However, for faster appends to large journal files, locking on read will
be needed, because appends are not atomic.
Sponsored-by: Dartmouth College's DANDI project
Capstone to this feature. Any transitions that have been performed on an
unmerged remote ref but not on the local git-annex branch, or vice-versa
have to be applied on the fly when reading files.
Sponsored-by: Dartmouth College's Datalad project
It would be difficult to make Annex.Branch.files query the unmerged
git-annex branches. Might be possible, similar to what was discussed in
7f6b2ca49c but again I decided to make it
not do anything in that situation to start with before adding such a
complicated thing.
git-annex info uses it when getting info about a repostory. The choices
were to make that fail with an error, or display the info it can, and
change the output slightly for the bits of info it cannot access. While
that is a behavior change, and I want to avoid any behavior changes due
to unmerged git-annex branches in a read-only repo, displaying a message
that is not a number seems unlikely to break anything that was consuming
a number, any worse than throwing an exception would. Probably.
Also git-annex unused --from origin is made to throw an error, but
it would fail later anyway when trying to write to the unused log files.
Sponsored-by: Dartmouth College's Datalad project
This makes --all error out in that situation. Which is better than
ignoring information from the branches.
To really handle the branches right, overBranchFileContents would need
to both query all the branches and union merge file contents
(or perhaps not provide any file content), as well as diffing between
branches to find files that are only present in the unmerged branches.
And also, it would need to handle transitions..
Sponsored-by: Dartmouth College's Datalad project
The way precaching works, it can't merge in information from those
branches efficiently, so just disable it and fall back to
Annex.Branch.get in order to get the correct information.
Sponsored-by: Dartmouth College's Datalad project
Improved support for using git-annex in a read-only repository, git-annex
branch information from remotes that cannot be merged into the git-annex
branch will now not crash it, but will be merged in memory.
To avoid this making git-annex behave one way in a read-only repository,
and another way when it can write, it's important that Annex.Branch.get
return the same thing (modulo log file compaction) in both cases.
This manages that mostly. There are some exceptions:
- When there is a transition in one of the remote git-annex branches
that has not yet been applied to the local or other git-annex branches.
Transitions are not handled.
- `git-annex log` runs git log on the git-annex branch, and so
it will not be able to show information coming from the other, not yet
merged branches.
- Annex.Branch.files only looks at files in the git-annex branch and not
unmerged branches. This affects git-annex info output.
- Annex.Branch.hs.overBranchFileContents ditto. Affects --all and
also importfeed (but importfeed cannot work in a read-only repo
anyway).
- CmdLine.Seek.seekFilteredKeys when precaching location logs.
Note use of Annex.Branch.fullname
- Database.ContentIdentifier.needsUpdateFromLog and updateFromLog
These warts make this not suitable to be merged yet.
This readonly code path is more expensive, since it has to query several
branches. The value does get cached, but still large queries will be
slower in a read-only repository when there are unmerged git-annex
branches.
When annex.merge-annex-branches=false, updateTo skips doing anything,
and so the read-only repository code does not get triggered. So a user who
is bothered by the extra work can set that.
Other writes to the repository can still result in permissions errors.
This includes the initial creation of the git-annex branch, and of course
any writes to the git-annex branch.
Sponsored-by: Dartmouth College's Datalad project
Fix bug that caused stale git-annex branch information to read when
annex.private or remote.name.annex-private is set.
The private journal file should not prevent reading more current
information from the git-annex branch, but used to.
Note that, overBranchFileContents has to do additional work now, when
there's a private journal file, it reads from the branch redundantly
and more slowly.
Sponsored-by: Jack Hill on Patreon
This is to track down what file in .git/annex/ is being written to via a
temp file when the repository is read-only.
Sponsored-by: Dartmouth College's Datalad project
init: When annex.commitmessage is set, use that message for the commit
that creates the git-annex branch.
This will be used by filter-branch too, and it seems to make sense to let
annex.commitmessage affect it.
filterBranch should be reusable for copy-branch command.
Changed LogVariety to differentiate between LocationLog and UrlLog;
only location logs contain uuids and need to be filtered by uuid,
while url logs do not. This does not change current behavior,
but it will let filterBranch be reused without filtering url logs
incorrectly.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
This only partly fixes importfeed to see journalled files, since it
separately cats metadata directly from the branch. Held off on a
changelog for a bug fix until that's dealt with.
At this point, private repos should mostly work, except for a few
commands that directly read from the git-annex branch and will not see
the private journal.
Private index not yet implemented.
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
This does mean that --all can end up processing the same key more than once,
but before the optimisations that introduced this bug, it used to also behave
that way. So I didn't try to fix that; it's an edge case and anyway git-annex
behaves well when run on the same key repeatedly.
I am not too happy with the use of a MVar to buffer the list of files in the
journal. I guess it doesn't defeat lazy streaming of the list, if that
list is actually generated lazily, and anyway the size of the journal is
normally capped and small, so if configs are changed to make it huge and
this code path fire, git-annex using enough memory to buffer it all is not a
large problem.
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
When not using --all, precaching only gets triggered when the
command actually needs location logs, and so there's no speed hit there.
This is a minor speed hit for --all, because it precaches even when the
location log is not actually going to be used, and so checking the journal
is not necessary. It would have been possible to defer checking the journal
until the cache gets used. But that would complicate the usual Branch.get
code path with two different kinds of caches, and the speed hit is really
minimal. A better way to speed up --all, later, would be to avoid
precaching at all when the location log is not going to be used.
This adds a separate journal, which does not currently get committed to
an index, but is planned to be committed to .git/annex/index-private.
Changes that are regarding a UUID that is private will get written to
this journal, and so will not be published into the git-annex branch.
All log writing should have been made to indicate the UUID it's
regarding, though I've not verified this yet.
Currently, no UUIDs are treated as private yet, a way to configure that
is needed.
The implementation is careful to not add any additional IO work when
privateUUIDsKnown is False. It will skip looking at the private journal
at all. So this should be free, or nearly so, unless the feature is
used. When it is used, all branch reads will be about twice as expensive.
It is very lucky -- or very prudent design -- that Annex.Branch.change
and maybeChange are the only ways to change a file on the branch,
and Annex.Branch.set is only internal use. That let Annex.Branch.get
always yield any private information that has been recorded, without
the risk that Annex.Branch.set might be called, with a non-private UUID,
and end up leaking the private information into the git-annex branch.
And, this relies on the way git-annex union merges the git-annex branch.
When reading a file, there can be a public and a private version, and
they are just concacenated together. That will be handled the same as if
there were two diverged git-annex branches that got union merged.
Reads of cached data are not debugged, only cache misses are, and since
many commands pre-cache location log data, this avoids a slew of
fastDebug calls when running commands such as git-annex get --from
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Eliminate a zombie that was only cleaned up by the later zombie cleanup
code.
This is still not ideal, it would be cleaner if it used conduit or
something, and if the thread gets killed before waiting, it won't stop
the process.
Only remaining zombies are in CmdLine.Seek
The cache was removed way back in 2012,
commit 3417c55189
Then I forgot I had removed it! I remember clearly multiple times when I
thought, "this reads the same data twice, but the cache will avoid that
being very expensive".
The reason it was removed was it messed up the assistant noticing when
other processes made changes. That same kind of problem has recently
been addressed when adding the optimisation to avoid reading the journal
unnecessarily.
Indeed, enableInteractiveJournalAccess is run in just the
right places, so can just piggyback on it to know when it's not safe
to use the cache.
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
