This assumes that no location log files will have a newline or carriage
return in their name. catObjectStream skips any such files due to
cat-file not supporting them.
Keys have been prevented from containing newlines since 2011,
commit 480495beb4. If some old repo
had a key with a newline in it, --all will just skip processing that key.
Other things, like .git/annex/unused files certianly assume no newlines in
keys too, and AFAICR, such keys never actually worked.
Carriage return is escaped by preSanitizeKeyName since 2013. WORM keys
generated before that point could perhaps contain a CR. (URL probably not,
http probably doesn't support an URL with a raw CR in it.) So, added
a warning in fsck about such keys. Although, fsck --all will naturally
skip them, so won't be able to warn about them. Not entirely
satisfactory, but I'll bet there are not really any such keys in
existence.
Thanks to Lukey for finding this optimisation.
The cache was removed way back in 2012,
commit 3417c55189
Then I forgot I had removed it! I remember clearly multiple times when I
thought, "this reads the same data twice, but the cache will avoid that
being very expensive".
The reason it was removed was it messed up the assistant noticing when
other processes made changes. That same kind of problem has recently
been addressed when adding the optimisation to avoid reading the journal
unnecessarily.
Indeed, enableInteractiveJournalAccess is run in just the
right places, so can just piggyback on it to know when it's not safe
to use the cache.
Always run Git.Config.store, so when the git config gets reloaded,
the override gets re-added to it, and changeGitRepo then calls extractGitConfig
on it and sees the annex.* settings from the override.
Remove any prior occurance of -c v and add it to the end. This way,
-c foo=1 -c foo=2 -c foo=1 will pass -c foo=1 to git, rather than -c foo=2
Note that, if git had some multiline config that got built up by
multiple -c's, this would not work still. But it never worked because
before the bug got fixed in the first place, the -c value was repeated
many times, so the multivalue thing would have been wrong. I don't think
-c can be used with multiline configs anyway, though git-config does
talk about them?
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
Fix a crash or potentially not all files being exported when sync -J
--content is used with an export remote.
Crash as described in fixed bug report.
waitForAllRunningCommandActions inserted in several points where all the
commandActions started before need to have finished before moving on to
the next stage of the export. A race across those points could have
maybe resulted in not all files being exported, or a wrong tree being
export.
For example, changeExport starting up an action like
a rename of A to B. Then, with that action still running, fillExport
uploading a new A, *before* the rename occurred. That race seems
unlikely to have happened. There are some other ones that this also
fixes.
This relicates git's behavior. It adds a few stat calls for the command
line parameters, so there is some minor slowdown, but even with thousands
of parameters it will not be very noticable, and git does the same statting
in similar circumstances.
Note that this does not prevent eg "git annex add symlink"; the symlink
will be added to git as usual. And "git annex find symlink" will silently
list nothing as well. It's only "symlink/foo" or "subdir/symlink/foo" that
triggers the warning.
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
Git has an obnoxious special case in git config, a line "foo" is the same
as "foo = true". That means there is no way to examine the output of
git config and tell if it was run with --null or not, since a "foo"
in the first line could be such a boolean, or could be followed by its
value on the next line if --null were used.
So, rather than trying to do such a detection, track the style of config
at all the points where it's generated.
The only price paid is one additional MVar read per write to the journal.
Presumably writing a journal file dominiates over a MVar read time by
several orders of magnitude.
--batch does not get the speedup because then it needs to notice when
another process has made a change. Also made the assistant and other damon
modes bypass the optimisation, which would not help them anyway.
The 'fail' method has been moved to the 'MonadFail' class. I made the changes
so that the code still compiles with previous versions of 'base' that don't
have the new MonadFail class exported by Prelude yet.
It's important that it be clear that it overrides a config, such that
reloading the git config won't change it, and in particular, setConfig
won't change it.
Most of the calls to changeGitConfig were actually after setConfig,
which was redundant and unncessary. So removed those.
The only remaining one, besides --debug, is in the handling of
repository-global config values. That one's ok, because the
way mergeGitConfig is implemented, it does not override any value that
is set in git config. If a value with a repo-global setting was passed
to setConfig, it would set it in the git config, reload the git config,
re-apply mergeGitConfig, and use the newly set value, which is the right
thing.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
The parser and looking up config keys in the map should both be faster
due to using ByteString.
I had hoped this would speed up startup time, but any improvement to
that was too small to measure. Seems worth keeping though.
Note that the parser breaks up the ByteString, but a config map ends up
pointing to the config as read, which is retained in memory until every
value from it is no longer used. This can change memory usage
patterns marginally, but won't affect git-annex.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
See the comment for a trace of the deadlock.
Added a new StartStage. New worker threads begin in the StartStage.
Once a thread is ready to do work, it moves away from the StartStage,
and no thread will ever transition back to it.
A thread that blocks waiting on another thread that is processing
the same key will block while in the StartStage. That other thread
will never switch back to the StartStage, and so the deadlock is avoided.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
When all worker threads are running and enteringStage is called,
it waits for an idle slot. If all off the other threads then call it in
turn, a deadlock occurrs.
This is the same problem I didn't actually fix in
5a9842d7ed.
Fixed by doing two separate STM transactions, the first replaces its
active thread with an idle thread, and the second waits for another idle
thread. That guarantees there will eventually be an idle thread to find.
The changes to WorkerPool were necessary because it can't add an idle
thread containing the Annex state and go on to run an action using that
same state, so I had to remove the Annex state from IdleWorker.
Rather than limiting it to PerformStage and CleanupStage, this opens it
up so any number of stages can be added as needed by commands.
Each concurrent command has a set of stages that it uses, and only
transitions between those can block waiting for a free slot in the
worker pool. Calling enteringStage for some other stage does not block,
and has very little overhead.
Note that while before the Annex state was duplicated on the first call
to commandAction, this now happens earlier, in startConcurrency.
That means that seek stage actions should that use startConcurrency
and then modify Annex state won't modify the state of worker threads
they then start. I audited all of them, and only Command.Seek
did so; prepMerge changes the working directory and so has to come
before startConcurrency.
Also, the remote list is built before duplicating the state, which means
that it gets built earlier now than it used to. This would only have an
effect of making commands that end up not needing to perform any actions
unncessary build the remote list (only when they're run with concurrency
enable), but that's a minor overhead compared to commands seeking
through the work tree and determining they don't need to do anything.
I couldn't find a way to avoid the deadlock w/o rewriting it to clearly
not have one. I'm not quite sure what was the actual cause of the
deadlock.
This makes me unsure how I now know it clearly doesn't have a
deadlock. But, it was easy to reproduce before (just call it twice in a
row) and doesn't happen now.
Oh joyous day, this is probably git-annex's oldest implementation wart,
source of much unncessary bother.
Now that we have a StartMessage, showEndResult' can look at it to know
if it needs to display an end message or not.
This is also going to be faster, because it avoids an uncessary state
lookup for each file processed.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
