--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
At this point I've checked all AnnexState values and these were all that
remained that could move.
Pity that Annex.repo can't move, but it gets modified sometimes..
A couple of AnnexState values are set by options and could be AnnexRead,
but happen to use Annex when being set.
Sponsored-by: Max Thoursie on Patreon
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
Propagate nonzero exit status from git ls-files when a specified file does
not exist, or a specified directory does not contain any files checked into
git.
The recent completion of the annex.skipunknown transition exposed this
bug, that has unfortunately been lurking all along.
It is also possible that git ls-files errors out for some other reason
-- perhaps a permission problem -- and this will also fix error propagation
in such situations.
Sponsored-by: Dartmouth College's Datalad project
A few places were reading the max symlink size of a pointer file,
then passing tp parseLinkTargetOrPointer. Which is fine currently, but
to support pointer files with lines of data after the pointer, enough
has to be read that parseLinkTargetOrPointer can be assured of seeing
enough of that data to know if it's correctly formatted.
Sponsored-by: Dartmouth College's Datalad project
Reject combinations of --batch (or --batch-keys) with options like --all or
--key or with filenames.
Most commands ignored the non-batch items when batch mode was enabled.
For some reason, addurl and dropkey both processed first the specified
non-batch items, followed by entering batch mode. Changed them to also
error out, for consistency.
Sponsored-by: Dartmouth College's Datalad project
This makes --all error out in that situation. Which is better than
ignoring information from the branches.
To really handle the branches right, overBranchFileContents would need
to both query all the branches and union merge file contents
(or perhaps not provide any file content), as well as diffing between
branches to find files that are only present in the unmerged branches.
And also, it would need to handle transitions..
Sponsored-by: Dartmouth College's Datalad project
The way precaching works, it can't merge in information from those
branches efficiently, so just disable it and fall back to
Annex.Branch.get in order to get the correct information.
Sponsored-by: Dartmouth College's Datalad project
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
* Removed support for accessing git remotes that use versions of
git-annex older than 6.20180312.
* git-annex-shell: Removed several commands that were only needed to
support git-annex versions older than 6.20180312.
(lockcontent, recvkey, sendkey, transferinfo, commit)
The P2P protocol was added in that version, and used ever since, so
this code was only needed for interop with older versions.
"git-annex-shell commit" is used by newer git-annex versions, though
unnecessarily so, because the p2pstdio command makes a single commit at
shutdown. Luckily, it was run with stderr and stdout sent to /dev/null,
and non-zero exit status or other exceptions are caught and ignored. So,
that was able to be removed from git-annex-shell too.
git-annex-shell inannex, recvkey, sendkey, and dropkey are still used by
gcrypt special remotes accessed over ssh, so those had to be kept.
It would probably be possible to convert that to using the P2P protocol,
but it would be another multi-year transition.
Some git-annex-shell fields were able to be removed. I hoped to remove
all of them, and the very concept of them, but unfortunately autoinit
is used by git-annex sync, and gcrypt uses remoteuuid.
The main win here is really in Remote.Git, removing piles of hairy fallback
code.
Sponsored-by: Luke Shumaker
New --batch-keys option added to these commands: get, drop, move, copy, whereis
git-annex-matching-options had to be reworded since some of its options
can be used to match on keys, not only files.
Sponsored-by: Luke Shumaker on Patreon
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
When this option is not used, there should be effectively no added
overhead, thanks to the optimisation in
b3cd0cc6ba.
When an action fails on a file, the size of the file still counts toward
the size limit. This was necessary to support concurrency, but also
generally seems like the right choice.
Most commands that operate on annexed files support the option.
export and import do not, and I don't know if it would make sense for
export to.. Why would you want an incomplete export? sync doesn't, and
while it would be easy to make it support it for transferring files,
it's not clear if dropping files should also take the size limit into
account. Commands like add that don't operate on annexed files don't
support the option either.
Exiting 101 not yet implemented.
Sponsored-by: Denis Dzyubenko on Patreon
The normalisation of filenames turns out to be the tricky part here,
because the associated files coming out of the keys db may look like
"./foo/bar" or "../bar". For the former to match a glob like "foo/*",
it needs to be normalised.
Note that, on windows, normalise "./foo/bar" = "foo\\bar"
which a glob like "foo/*" won't match. So the glob is matched a second
time, on the toInternalGitPath, so allowing the user to provide a glob
with the slashes in either direction. However, this still won't support
some wacky edge cases like the user providing a glob of "foo/bar\\*"
Sponsored-by: Dartmouth College's Datalad project
If it's passed a ConfigKey such as annex.version, avoid returning
an empty remote name and return Nothing instead. Also, foo.bar.baz is
not treated as a remote named "bar".
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
This does mean that --all can end up processing the same key more than once,
but before the optimisations that introduced this bug, it used to also behave
that way. So I didn't try to fix that; it's an edge case and anyway git-annex
behaves well when run on the same key repeatedly.
I am not too happy with the use of a MVar to buffer the list of files in the
journal. I guess it doesn't defeat lazy streaming of the list, if that
list is actually generated lazily, and anyway the size of the journal is
normally capped and small, so if configs are changed to make it huge and
this code path fire, git-annex using enough memory to buffer it all is not a
large problem.
Fix bug caused by recent optimisations that could make git-annex not see
recently recorded status information when configured with
annex.alwayscommit=false.
When not using --all, precaching only gets triggered when the
command actually needs location logs, and so there's no speed hit there.
This is a minor speed hit for --all, because it precaches even when the
location log is not actually going to be used, and so checking the journal
is not necessary. It would have been possible to defer checking the journal
until the cache gets used. But that would complicate the usual Branch.get
code path with two different kinds of caches, and the speed hit is really
minimal. A better way to speed up --all, later, would be to avoid
precaching at all when the location log is not going to be used.
Had to add to AnnexRead an indication of whether debugging is enabled.
Could have just made setupConsole not install a debug output action that
outputs, and have enableDebug be what installs that, but then in the
common case where there is no debug selector, and so all debug output is
selected, it would run the debug output action every time, which entails
an IORef access. Which would make fastDebug too slow..
Most of the changes here involve global option parsing: GlobalSetter
changed so it can both run an Annex action to set state, but can also
change the AnnexRead value, which is immutable once the Annex monad is
running.
That allowed a debugselector value to be added to AnnexRead, seeded
from the git config. The --debugfilter option's GlobalSetter then updates
the AnnexRead.
This improved GlobalSetter can later be used to move more stuff to
AnnexRead. Things that don't involve a git config will be easier to
move, and probably a *lot* of things can be moved eventually.
fastDebug, while implemented, is not used anywhere yet. But it should be
fast..
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
Added LinkType to ProvidedInfo, and unified MatchingKey with
ProvidedInfo. They're both used in the same way, so there was no real
reason to keep separate.
Note that addLocked and addUnlocked still set matchNeedsFileName,
because to handle MatchingFile, they do need it. However, they
don't use it when MatchingInfo is provided. This should be ok,
the --branch case will be able skip checking matchNeedsFileName,
since it will provide a filename in any case.
Previously such nonsensical combinations always treated the matching option
as if it didn't match.
For now, made find --branch refuse matching options that need a
filename, because one is not provided to them in a way they'll use.
There's an open bug report to support it, but making it error out is
better than the old behavior of not finding what it was asked to.
Also, made --mimetype combined with eg --all work, by looking at the
object file when operating on keys.
Implemented by generalizing registerurl. Without the implicit batch mode
of registerurl since that is only a backwards compatability thing
(see commit 1d1054faa6).
When annex.stalldetection is not enabled, and a likely stall is detected,
display a suggestion to enable it.
Note that the progress meter display is not taken down when displaying
the message, so it will display like this:
0% 8 B 0 B/s
Transfer seems to have stalled. To handle stalling transfers, configure annex.stalldetection
0% 10 B 0 B/s
Although of course if it's really stalled, it will never update
again after the message. Taking down the progress meter and starting
a new one doesn't seem too necessary given how unusual this is,
also this does help show the state it was at when it stalled.
Use of uninterruptibleCancel here is ok, the thread it's canceling
only does STM transactions and sleeps. The annex thread that gets
forked off is separate to avoid it being canceled, so that it
can be joined back at the end.
A module cycle required moving from dupState the precaching of the
remote list. Doing it at startConcurrency should cover all the cases
where the remote list is used in concurrent actions.
This commit was sponsored by Kevin Mueller on Patreon.
Seems only fair, that, like git runs git-annex, git-annex runs
git-annex-foo.
Implementation relies on O.forwardOptions, so that any options are passed
through to the addon program. Note that this includes options before the
subcommand, eg: git-annex -cx=y foo
Unfortunately, git-annex eats the --help/-h options.
This is because it uses O.hsubparser, which injects that option into each
subcommand. Seems like this should be possible to avoid somehow, to let
commands display their own --help, instead of the dummy one git-annex
displays.
The two step searching mirrors how git works, it makes finding
git-annex-foo fast when "git annex foo" is run, but will also support fuzzy
matching, once findAllAddonCommands gets implemented.
This commit was sponsored by Dr. Land Raider on Patreon.
Since that can lead to data loss, which should never be enabled by an
option other than --force.
I suppose that using --trust was in some situation, safer than --force,
because it doesn't entirely disable checking for data loss, but only
disables checking involving data that is on the specified repository.
But it seems better to be able to say that data loss only happens with
--force.
This commit was sponsored by Graham Spencer on Patreon.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
It got broken in several ways by the streaming seeking optimisations
around version 8.20201007.
Moved time limit checking out of the matcher, which was a hack in the
first place. So everywhere that uses Limit.getMatcher needs to check
time limit. Well, almost everywhere. Command.Info uses it, but it does
not make sense to time limit getting info. And Command.MultiCast uses it
just to build up a list of files that then get passed to a command, so
it would never have hit the timeout in a useful way.
This implementation is a little more expensive when at time limit than
necessary, since it continues seeking only to discard everything after the
time limit. I did try making it close the file handles to force a faster
shutdown, but that didn't work and hung. Could certianly be improved
somehow, but seeking is probably not the expensive bit when a time limit
is hit, so this seems acceptable for now.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
This is to avoid breakage when upgrading or downgrading git-annex with a
process running that uses the interface. It's better to keep the
compatability code for a few years than worry about such breakage.
This commit was sponsored by Brett Eisenberg on Patreon.
