This turns out to only be necessary is edge cases. Most of the
time, git-annex unused --from remote doesn't see git-remote-annex keys
at all, because it does not record a location log for them.
On the other hand, git-annex unused does find them, since it does not
rely on the location log. And that's good because they're a local cache
that the user should be able to drop.
If, however, the user ran git-annex unused and then git-annex move
--unused --to remote, the keys would have a location log for that
remote. Then git-annex unused --from remote would see them, and would
consider them unused. Even when they are present on the special remote
they belong to. And that risks losing data if they drop the keys from
the special remote, but didn't expect it would delete git branches they
had pushed to it.
So, make git-annex unused --from skip git-remote-annex keys whose uuid
is the same as the remote.
fsck --fast was intended to disable checksumming, but checksumming is done
after transfers too. Due to the check being in the non-incremental path,
it would only affect non-incremental checksumming during a transfer,
and I'm not 100% sure that it was a problem.
Also, when using an external backend that does checksumming, fsck --fast
didn't disable it and now does.
Not quite there yet.
Also, changed the format of GITBUNDLE keys to use only one '-'
after the UUID. A sha256 does not contain that character, so can just
split at the last one.
Amusingly, the sha256 will probably not actually be verified. A git
bundle contains its own checksums that git uses to verify it. And if
someone wanted to replace the content of a GITBUNDLE object, they
could just edit the manifest to use a new one whose sha256 does verify.
Sponsored-by: Nicholas Golder-Manning
Test suite passes this time. When committing the adjusted branch, use
the old method to make a message that old git-annex can consume. Also
made the code accept the new message, so that eventually
commitTreeExactMessage can be removed.
Sponsored-by: Kevin Mueller on Patreon
This reverts commit cee12f6a2f.
This commit broke git-annex init run in a repo that was cloned from a
repo with an adjusted branch checked out.
The problem is that findAdjustingCommit was not able to identify the
commit that created the adjusted branch. It seems that there is an extra
"\n" at the end of the commit message that it does not expect.
Since backwards compatability needs to be maintained, cannot just make
findAdjustingCommit accept it with the "\n". Will have to instead
have one commitTree variant that uses the old method, and use it for
adjusted branch committing.
sync, assist, import: Allow -m option to be specified multiple times, to
provide additional paragraphs for the commit message.
The option parser didn't allow multiple -m before, so there is no risk of
behavior change breaking something that was for some reason using multiple
-m already.
Pass through to git commands, so that the method used to assemble the
paragrahs is whatever git does. Which might conceivably change in the
future.
Note that git commit-tree has supported -m since git 1.7.7. commitTree
was probably not using it since it predates that version. Since the
configure script prevents building git-annex with git older than 2.1,
there is no risk that it's not supported now.
Sponsored-by: Nicholas Golder-Manning on Patreon
A recent change made plumbing the backend through fsck unncessary.
Left fsck checking backend and skipping operating on key when it could
not find one. Not checking the backend would be a behavior change.
For example the command git-annex fsck --key FOO--bar does nothing
since FOO is not a known backend. If this were removed it would
instead go on and fsck it and warn that no copies exist of the key.
That behavior change seems like it would be fine, but I also have no
reason to make it.
A recent change made plumbing the backend through fsck unncessary.
Left fsck checking backend and skipping operating on key when it could
not find one, although I'm not sure if that's necessary to support eg,
keys with unknown backend.
When a file in the export is renamed, and the remote's renameExport
returned Nothing, renaming to the temp file would first say it was
renaming, and appear to succeed, but actually what it did was delete the
file. Then renaming from the temp file would not do anything, since the
temp file is not present on the remote. This appeared as if a file got
renamed to a temp file and left there.
Note that exporttree=yes importree=yes remotes have their usual
renameExport replaced with one that returns Nothing. (For reasons
explained in Remote.Helper.ExportImport.) So this happened
even with remotes that support renameExport.
Fix by letting renameExport = Nothing when it's not supported at all.
This avoids displaying the rename.
Sponsored-by: Graham Spencer on Patreon
What this can currently be used for is only to change an url from being
used by a special remote to being used by the web remote.
This could have been a --move-from option to registerurl. But, that would
have complicated its option and --batch processing, and also would have
complicated unregisterurl, which is implemented on top of
Command.Registerurl. So, a separate command was actually less complicated
to implement.
The generic description of the command is because I want to make this
command a catch-all for other url updating kind of things, if there are
ever any more. Also because it was hard to come up with a good name for the
specific action. I considered `git-annex moveurl`, but that seems to
indicate data is perhaps actually being moved, and seems to sit at the same
level as addurl and rmurl, and this command is at the plumbing
level of registerurl and unregisterurl.
Sponsored-by: Dartmouth College's DANDI project
This needs the content to be present in order to hash it. But it's not
possible for a module used by Backend.URL to call inAnnex because that
would entail a dependency loop. So instead, rely on the fact that
Command.Migrate calls inAnnex before performing a migration.
But, Command.ExamineKey calls fastMigrate and the key may or may not
exist, and it's not wanting to actually perform a migration in any case.
To handle that, had to add an additional value to fastMigrate to
indicate whether the content is inAnnex.
Factored generateEquivilantKey out of Remote.Web.
Note that migrateFromURLToVURL hardcodes use of the SHA256E backend.
It would have been difficult not to, given all the dependency loop
issues. But --backend and annex.backend are used to tell git-annex
migrate to use VURL in any case, so there's no config knob that
the user could expect to configure that.
Sponsored-by: Brock Spratlen on Patreon
git-annex fsck and some other commands that verify the content of a key
were using the non-incremental verification interface. But for VURL
urls, that interface is innefficient because when there are multiple
equivilant keys, it has to separately read and checksum for each key in
turn until one matches. It's more efficient for those to use the
incremental interface, since the file can be read a single time.
There's no real downside to using the incremental interface when available.
Note that more speedup could be had for VURL, if it was able to
calculate the checksum a single time and then compare with the
equivilant keys checksums. When the equivilant keys use the same type of
checksum.
Sponsored-by: k0ld on Patreon
Considerable difficulty to work around an import cycle. Had to move the
list of backends (except for VURL) to Backend.Variety to VURL could use
it.
Sponsored-by: Kevin Mueller on Patreon
Not yet implemented is recording hashes on download from web and
verifying hashes.
addurl --verifiable option added with -V short option because I
expect a lot of people will want to use this.
It seems likely that --verifiable will become the default eventually,
and possibly rather soon. While old git-annex versions don't support
VURL, that doesn't prevent using them with keys that use VURL. Of
course, they won't verify the content on transfer, and fsck will warn
that it doesn't know about VURL. So there's not much problem with
starting to use VURL even when interoperating with old versions.
Sponsored-by: Joshua Antonishen on Patreon
Except when a commit is made in a view, which changes metadata.
Make the assistant commit the git-annex branch after git commit of working
tree changes.
This allows using the annex.commitmessage-command in the assistant to
generate a commit message for the git-annex branch that relies on state
gathered during the commit of the working tree. Eg, it might reuse the
commit message.
Note that, when not using the assistant, a git-annex add still commits
the git-annex branch, so such a annex.commitmessage-command set up would
not work then. But if someone is using the assistant and wants
programmatic control over commit messages, this is useful. Someone not
using the assistant can get the same result by using annex.alwayscommit=false
during the git-annex add, and git-annex merge after they git commit.
pre-commit was never really intended to commit the git-annex branch
(except after recording changed metadata), but the assistant did sort of
rely on it. It does later commit the git-annex branch before pushing to
remotes, but I didn't want to risk building up lots of uncommitted changes
to it if that didn't happen frequently.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
It's trivial enough that it it's not worth factoring it out to somewhere
in common with Command.Undo and the assistant.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
Was doing a Git.Branch.commit for historical reasons to do with direct
mode, which no longer apply.
Note that the preCommitAnnexHook is no longer called in commitStaged
because git-annex installs a pre-commit hook that runs the pre-commit-annex
hook. And git commit will run the pre-commit hook.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
--raw-except=web allows using yt-dlp but not any other special remotes.
Currently this option can only be used once, trying to use it repeatedly
will make option parsing fail. Perhaps it ought to support being used more
than once, but it seemed like an unlikely use case to need that.
Note that getParsed is called repeatedly when the option is used with
several urls. While implementing DeferredParseClass would avoid that
innefficiency, it didn't seem worth the added boilerplate since
getParsed only calls byNameWithUUID which does minimal work.
Sponsored-by: Dartmouth College's DANDI project
importfeed --force: Don't treat it as a failure when an already downloaded
file exists. (Fixes a behavior change introduced in 10.20230626.)
04ee6c4c6b caused the reversion. Inside a CommandPerform, stop causes it
to fail. Before that commit, it was inside a CommandStart, where stop
causes it to skip.
Which uses yt-dlp to screen scrape the equivilant of an RSS feed.
Note that youtubedlscraped is a speed optimisation. Since yt-dlp found
the urls, we know it can download them. That avoids calling
youtubeDlSupported on each url, which makes --fast a lot faster.
Almost all the same metadata fields and file formatting fields are
populated, when yt-dlp is able to get the data. Note that yt-dlp has some
additional useful metadata that could be exposed. But, much of it is
specific to particular websites, and it would be hard to document on the
git-annex importfeed man page.
Sponsored-by: unqueued on Patreon
The getSocket comment that mentioned using ":port"
in the hostname seems to have been incorrect or be out of date.
After all, the bug report came when the user first tried doing that,
and it didn't work.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
Improve disk free space checking when transferring unsized keys to
local git remotes. Since the size of the object file is known, can
check that instead.
Getting unsized keys from local git remotes does not check the actual
object size. It would be harder to handle that direction because the size
check is run locally, before anything involving the remote is done. So it
doesn't know the size of the file on the remote.
Also, transferring unsized keys to other remotes, including ssh remotes and
p2p remotes don't do disk size checking for unsized keys. This would need a
change in protocol.
(It does seem like it would be possible to implement the same thing for
directory special remotes though.)
In some sense, it might be better to not ever do disk free checking for
unsized keys, than to do it only sometimes. A user might notice this
direction working and consider it a bug that the other direction does not.
On the other hand, disk reserve checking is not implemented for most
special remotes at all, and yet it is implemented for a few, which is also
inconsistent, but best effort. And so doing this best effort seems to make
some sense. Fundamentally, if the user wants the size to always be checked,
they should not use unsized keys.
Sponsored-by: Brock Spratlen on Patreon
Thanks to previous work in 11cc9f1933,
this is almost entirely free, it only needs to do some additional map
lookups and math.
The strictness annotations keep the memory use from blowing up.
Sponsored-by: unqueued on Patreon
migrate: Support adding size to URL keys that were added with --relaxed, by
running eg: git-annex migrate --backend=URL foo
Since url keys cannot be generated, that used to fail. Make it notice that
the backend is not changed, and just get the size of the content.
Sponsored-by: Brock Spratlen on Patreon
pull, sync: When operating on content, automatically hard link objects
that have been migrated.
Added annex.syncmigrations config that can be set to false to prevent
pull and sync from migrating object content.
I think that true is a good default for this config, because it avoids
users having to re-download migrated content or learning about migration.
But, some users will surely not like it, whether because it does take some
time (especially for the first git-annex branch scan when there is a long
history), or because they want to deal with it manually, or because their
filesystem doesn't support hard links and they don't want it to copy
objects.
Sponsored-by: k0ld on Patreon
And avoid migrate --update/--aply migrating when the new key was already
present in the repository, and got dropped. Luckily, the location log
allows distinguishing from the new key never having been present!
That is mostly useful for --apply because otherwise dropped files would
keep coming back until the old objects were reaped as unused. But it
seemed to make sense to also do it for --update. for consistency in edge
cases if nothing else. One case where --update can use it is when one
branch got migrated earlier, and we dropped the file, and now another
branch has migrated the same file.
Sponsored-by: Jack Hill on Patreon
This only avoids extra work and a warning messsage. It seems likely that
in such a situation, the user does not want migrations to insecure
hashes, and so best to ignore them as much as possible. If
the user merges a branch that switches annexed files to an insecure
hash, they will notice that the file contents are unavailable,
and git-annex get will tell them the problem then. So it does not seem
useful to have migrate --update also complain about it.
Could use some more testing.
When the old key is not present, Command.ReKey.linkKey' will return
False, so this handles that case ok.
But, I do wonder if distributed migration may need to deal with the old
key getting copied into the repository later. In that situation,
re-running migrate --update won't link it to the new key. It may be that
some users will need that. They can delete .git/annex/migrate.log and
run it again, but that is not a good user interface. Maybe either have
a way to re-run all distributed migrations, or record migrations
in a database and scan the db to find migrations to do in a future run?
Sponsored-by: Kevin Mueller on Patreon
The git log is outputting the diff, but this only looks at the new
files. When we have a new file, we can get the old filename by just
replacing "new" with "old". And then use branchFileRef to refer to it
allows catting the old key.
While this does have to skip past the old files in the diff, it's still
faster than calling git diff separately.
Sponsored-by: Nicholas Golder-Manning on Patreon
This is most of the way there, but not quite working.
The layout of migrate.tree/ needs to be changed to follow this approach.
git log will list all the files in tree order, so the new layout needs
to alternate old and new keys. Can that be done? git may not document
tree order, or may not preserve it here.
Alternatively, change to using git log --format=raw and extract
the tree header from that, then use
git diff --raw $tree:migrate.tree/old $tree:migrate.tree/new
That will be a little more expensive, but only when there are lots of
migrations.
Sponsored-by: Joshua Antonishen on Patreon
This will allow distributed migration: Start a migration in one clone of
a repo, and then update other clones.
commitMigration is a bit of a bear.. There is some inversion of control
that needs some TMVars. Also streamLogFile's finalizer does not handle
recording the trees, so an interrupt at just the wrong time can cause
migration.log to be emptied but the git-annex branch not updated.
Sponsored-by: Graham Spencer on Patreon
Presumably git merge sometimes needs to verifiy if a worktree file is
modified, and so will then run git-annex filter-process which would try to
take the pid lock. And for whatever reason, git-annex sync already had the
pidlock held. I have not replicated that, but it does make enough sense to
deploy the workaround.
Like I said back in commit 7bdb0cdc0d,
Arguably, it would be better to have a way to make any process git-annex
runs have the env var set. But then it would need to take the pid lock
when running any and all processes, and that would be a problem when
git-annex runs two processes concurrently. So, I'm left doing it ad-hoc
in places where git-annex really does run a child process, directly
or indirectly via a particular git command.
Sponsored-by: KDM on Patreon
Implementation was simple because it's equivilant to
--from=foo --to remote for each other remote, followed by
--to remote when there's a local copy.
(Or, in the edge case of --from-anywhere --to=here,
it's the same as --to=here.)
Note that, when the local repo does not have a copy,
fromToPerform gets it from a remote, sends it to the destination,
and drops the local copy. Another call to that for a second remote
will notice that the dest now has a copy, and simply drop from the
second remote, avoiding a second transfer.
Also note that, when numcopies doesn't allow dropping it from
everywhere, it will drop it from the cheapest remotes first
(maybe not ideal) up to more expensive remotes, and finally from the local
repo. So the local repo will generally end up holding a copy. Maybe not
ideal in all cases either, but it seems no worse to do that than to end up
with a copy undropped from a remote.
And I'm not entirely happy with the output, eg:
copy bigfile (from r3...) ok
copy bigfile ok
That makes sense if you think of the second line as being
the same as what is output by `git-annex copy bigfile --to bar`,
but it's less clear in this context. Maybe add "(from here...)"?
Also the --json output doesn't have a machine-readable field for
the "from" uuid, and maybe it should?
Sponsored-by: Dartmouth College's DANDI project
Make git-annex get/copy/move --from foo override configuration of
remote.foo.annex-ignore, as documented.
This already worked for remotes supporting hasKeyCheap. For others though,
git-annex copy --from foo would silently not do anything, while
git-annex copy --to foo would use the annex-ignored remote.
Also improved the annex-ignore docs, to reflect that `git-annex get`
without --from will skip using annex-ignored remotes, for example.
Sponsored-by: Dartmouth College's DANDI project
Eg when the destination is logged as containing a file, skip
actively checking that it does contain it.
Note that --fast does not prevent other verifications of content
location that are done in a copy --from --to. Perhaps it could, but this
change will already avoid the real unnecessary work of operating on
files that are already in the remote.
And avoiding other verifications
might cause it to fail if the location log thinks that --to does not
contain the content but does. Such complications with `git-annex copy
--to remote --fast` led to commit d006586cd0
which added a note that gets displayed when that fails, mentioning it
might be due to --fast being enabled.
copy --from --to is already complicated enough without needing to worry
about such edge cases, so continuing to doing some verification of
content location after the initial --fast filtering seems ok.
Sponsored-by: Dartmouth College's DANDI project
The gnuplot output is pretty good, but could still be improved with:
* more colors (repeating colors is confusing with a lot of repos)
* better positioning of the legend, making the plot wider and moving it
from over top of the graph
Sponsored-by: Kevin Mueller on Patreon
Only counting received and not dropped makes this show the bandwidth of
data coming into the repository, although only in a sense. Since
git-annex branch updates only happen at the end of a command, and we
don't know when a command started, it's only an approximation of the
actual bandwidth. (A previous git-annex branch update made have
happened in a different repository.)
It would be possible to also add a --dropped option, but I don't know
how useful that would be?
Sponsored-by: Nicholas Golder-Manning on Patreon
For example, my sound repo has in the git-annex branch a commit from
2036, which is followed by one from 2034, in amoung commits from 2013.
Clearly there was a problem with the clock.
Since git log --date-order has a behavior of
"Show no parents before all of its children are shown", the data still
gets processed ok. The future timestamp just prevented displaying data
after that commit. It seems better, when the clock was wrong, to display
a wrong date, and then return to right dates.
It would be nice to filter out the wrong dates from display entirely,
but that seems it would need to buffer the whole output. This command is
too slow to buffer it all before displaying anything, and anyway this
kind of problem is probably rare.
Sponsored-by: Joshua Antonishen on Patreon
With this, git annex log --totalsizes can be compared with
git-annex info's "combined annex size of all repositories"
to double-check it works correctly.
In my sound repo, the two match.
In my big repo, the two report slightly different sizes,
with the former being 1.3 gb smaller than the latter.
I don't know the reason for this disreprency. Given the 30+tb size of
the repo, it's a small difference.
It seems possible that a bug in an old version of git-annex could
explain it. Eg, if an old git-annex lost a line when updating trust.log
or a location log in a merge, git-annex info would see only what it
replaced it with, while git-annex log will see the previous value as
well.
Sponsored-by: Leon Schuermann on Patreon
Noticed that Semigroup instance of Map is not suitable to use
for MapLog. For example, it behaved like this:
ghci> parseTrustLog "foo 1 timestamp=10\nfoo 2 timestamp=11" <> parseTrustLog "foo X timestamp=12"
fromList [(UUID "foo",LogEntry {changed = VectorClock 11s, value = SemiTrusted})]
Which was wrong, it lost the newer DeadTrusted value.
Luckily, nothing used that Semigroup when operating on a MapLog. And this
provides a safe instance.
Sponsored-by: Graham Spencer on Patreon
CSV format so it can be fed into a program to graph it.
Note that dead repositories are not yet handled so their sizes show as
nonzero after they are marked dead.
Sponsored-By: k0ld on Patreon
This can take a lot of memory. I decided to violate the usual rule in
git-annex that it operate in constant memory no matter how many annexed
objects. In this case, it would be hard to be fast without using a big
map of the location logs. The main difficulty here is that there can be
many git-annex branches and it needs to display a consistent view at a
point in time, which means merging information from multiple git-annex
branches.
I have not checked if there are any laziness leaks in this code. It
takes 1 gb to run in my big repo, which is around what I estimated
before writing it.
2 options that are documented are not yet implemented.
Small bug: With eg --when=1h, it will display at 12:00 then 1:10 if the
next change after 12:59 is then. Then it waits until after 2:10 to
display the next change. It ought to wait until after 2:00.
Sponsored-by: Brock Spratlen on Patreon
Factored out overLocationLogs from CmdLine.Seek, which can calculate this
pretty fast even in a large repo. In my big repo, the time to run git-annex
info went up from 1.33s to 8.5s.
Note that the "backend usage" stats are for annexed files in the working
tree only, not all annexed files. This new data source would let that be
changed, but that would be a confusing behavior change. And I cannot
retitle it either, out of fear something uses the current title (eg parsing
the json).
Also note that, while time says "402108maxresident" in my big repo now,
up from "54092maxresident", top shows the RES constant at 64mb, and it
was 48mb before. So I don't think there is a memory leak. I tried using
deepseq to force full evaluation of addKeyCopies and memory use didn't
change, which also says no memory leak. And indeed, not even calling
addKeyCopies resulted in the same memory use. Probably the increased memory
usage is buffering the stream of data from git in overLocationLogs.
Sponsored-by: Brett Eisenberg on Patreon
Minor optimisation, but a win in every case, except for a couple where
it's a wash.
Note that replaceFile still takes a FilePath, because it needs to
operate on Chars to truncate unicode filenames properly.
Note that the use of s2w8 in genUUIDInNameSpace made it truncate unicode
characters. Luckily, genUUIDInNameSpace is only ever used on ASCII
strings as far as I can determine. In particular, git-remote-gcrypt's
gcrypt-id is an ASCII string.
importfeed: Use caching database to avoid needing to list urls on every
run, and avoid using too much memory.
Benchmarking in my podcasts repo, importfeed got 1.42 seconds faster,
and memory use dropped from 203000k to 59408k.
Database.ImportFeed is Database.ContentIdentifier with the serial number
filed off. There is a bit of code duplication I would like to avoid,
particularly recordAnnexBranchTree, and getAnnexBranchTree. But these use
the persistent sqlite tables, so despite the code being the same, they
cannot be factored out.
Since this database includes the contentidentifier metadata, it will be
slightly redundant if a sqlite database is ever added for metadata. I
did consider making such a generic database and using it for this. But,
that would then need importfeed to update both the url database and the
metadata database, which is twice as much work diffing the git-annex
branch trees. Or would entagle updating two databases in a complex way.
So instead it seems better to optimise the database that
importfeed needs, and if the metadata database is used by another command,
use a little more disk space and do a little bit of redundant work to
update it.
Sponsored-by: unqueued on Patreon
push: When on an adjusted branch, propagate changes to parent branch before
updating export remotes.
This is a somewhat redundant call to propigateAdjustedCommits, since it
also gets called at pushLocal time. That other one needs to come after
importing from importtree remotes though, and seekExportContent has to come
earlier, so I don't see a way to avoid doing it twice.
Note that git-annex sync also manages to avoid the problem, it's only
git-annex push that had the bug.
Sponsored-by: Leon Schuermann on Patreon
A misleading message was displayed in several cases.
If the user has run eg: git config
remote.push-win-remote.annex-tracking-branch 'adjusted/main(unlocked)'
That is not supported, and now it will tell them it's not a valid
configuration. A user reported doing that, but I don't know if it's a
common point of confusion. If it is a common problem, a better message
would be possible, or it could convert back from the adjusted branch to
the actual branch.
Sponsored-by: Graham Spencer on Patreon
Removed the prior code that checked for keys used by current versions of
the files being acted on. It is redundant with the associated files
check (so long as the associated files database is always up-to-date,
which reconcileStaged should accomplish).
Sponsored-by: Luke T. Shumaker on Patreon
The tricky thing about this turned out to be handling renames and reverts.
For that, it has to make two passes over the git log, and to avoid
buffering a possibly huge amount of logs in memory (ie the whole git log of
an entire repository!), runs git log twice.
(It might be possible to speed this up by asking git log to show a diff,
and so avoid needing to use catKey.)
Sponsored-By: Brock Spratlen on Patreon
Removed the dontCheck repoExists, because running it in a repo that has not
been initialized yet would update location log with nouuid. And I guess
it's ok for it to only support running in git-annex repos.
This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
Fix behavior when importing a tree from a directory remote when the
directory does not exist. An empty tree was imported, rather than the
import failing. Merging that tree would delete every file in the
branch, if those files had been exported to the directory before.
The problem was that dirContentsRecursive returned [] when the directory
did not exist. Better for it to throw an exception. But in commit
74f0d67aa3 back in 2012, I made it never
theow exceptions, because exceptions throw inside unsafeInterleaveIO become
untrappable when the list is being traversed.
So, changed it to list the contents of the directory before entering
unsafeInterleaveIO. So exceptions are thrown for the directory. But still
not if it's unable to list the contents of a subdirectory. That's less of a
problem, because the subdirectory does exist (or if not, it got removed
after being listed, and it's ok to not include it in the list). A
subdirectory that has permissions that don't allow listing it will have its
contents omitted from the list still.
(Might be better to have it return a type that includes indications of
errors listing contents of subdirectories?)
The rest of the changes are making callers of dirContentsRecursive
use emptyWhenDoesNotExist when they relied on the behavior of it not
throwing an exception when the directory does not exist. Note that
it's possible some callers of dirContentsRecursive that used to ignore
permissions problems listing a directory will now start throwing exceptions
on them.
The fix to the directory special remote consisted of not making its
call in listImportableContentsM use emptyWhenDoesNotExist. So it will
throw an exception as desired.
Sponsored-by: Joshua Antonishen on Patreon
Only display warning when git-annex sync (without --content or
--no-content) is used with repositories that have preferred content
configured.
Sponsored-by: Leon Schuermann on Patreon
I considered a more wide-ranging config option to make other commands
also show dead repositories. But it would be difficult to implement that
because Remote.keyLocations is used to get locations, filtering out dead
repos, and commands like get then try to use those locations. So a config
setting would make dead repos sometimes be acted on by commands.
Sponsored-by: unqueued on Patreon
And annex.largefiles and annex.addunlocked.
Also git-annex matchexpression --explain explains why its input
expression matches or fails to match.
When there is no limit, avoid explaining why the lack of limit
matches. This is also done when no preferred content expression is set,
although in a few cases it defaults to a non-empty matcher, which will
be explained.
Sponsored-by: Dartmouth College's DANDI project
importfeed bug fix: When -J was used with multiple feeds, some feeds did
not get their items downloaded.
In my case, I had added a feed to the end of the list, and no items from it
were ever downloaded.
Sponsored-by: Leon Schuermann on Patreon
This causes changes to the original branch to get merged with a single
sync. Before, it took 2 syncs; the first happened to update the synced/
branch, and the second merged changes from the synced/ branch into the
ajusted branch.
Using mergeToAdjustedBranch when tomerge == origbranch is probably
overkill, but it does work fine.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
(And allow it to be used in the --template although that seems unlikely to
be very useful.)
My use case for this is that one of the podcast feeds I subscribe to is
sometimes leaking episodes of some other podcast. The other podcast is also
very close to spam, so this may be a form of intentional spamming. I have
not been able to catch the podcast feed containing those episodes, so I
don't know which one is at fault. So putting this in the metadata will let
me eventually catch it.
Command.Add.seek starts concurrency with CommandStages. And for
Command.Sync, it needs TransferStages. So, to get both types of concurrency
for the two different parts, it either needs to change the type of
concurrency in between, or just call startConcurrency once for each.
It seems safe enough to call startConcurrency twice, because it does shut
down concurrency (mostly) at the end, and eg the old Annex.workers get
emptied.
Sponsored-by: unqueued on Patreon
This ended up having an interface like sync, rather than like get/copy/drop.
That let it be implemented in terms of sync, which took a lot less code.
Also, it lets it handle many of the edge cases that sync does, such as
getting files that are not visible in a --hide-missing branch, and sending
files to exporttree remotes.
As well as being easier to implement, `git-annex satisfy myremote` makes
sense as it satisfies the preferred content settings of the remote.
`git-annex satisfy somefile` does not form a sentence that makes sense. So
while -C can be a little bit annoying, it still makes sense to have this
syntax.
Note that, while I initially thought this would also satisfy numcopies, it
does not. Arguably it ought to. But, sync does not send files in order to
satisfy numcopies, it only sends files to satisfy preferred content. And
it's important that this transfer the same files as sync does, because
it will probably be used in a workflow where the user sometimes syncs and
sometimes satisfies, and does not expect satisfy to do things that sync
would not do.
(Also opened a new bug that also affects sync et all, not only this command.)
Sponsored-by: Nicholas Golder-Manning on Patreon
This was already possible, but it was rather hard to come up with the
complex shell command needed.
Note that the diff output starts with "diff a/... b/...".
I left off the "--git" because it's not a git format diff.
