The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is groundwork for letting a repo be instantiated the first time
it's actually used, instead of at startup.
The only behavior change is that some old special cases for xmpp remotes
were removed. Where before git-annex silently did nothing with those
no-longer supported remotes, it may now fail in some way.
The additional IO action should have no performance impact as long as
it's simply return.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon
And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
Clean up some uses of showStart with "" for the file,
or in some cases, a non-filename description string. That would
generate bad json, although none of the commands doing that
supported --json.
Using "" for the file resulted in output like "foo rest";
now the extra space is eliminated.
This commit was sponsored by Fernando Jimenez on Patreon.
* Only export to remotes that were initialized to support it.
* Prevent storing key/value on export remotes.
* Prevent enabling exporttree=yes and encryption in the same remote.
SetupStage Enable was changed to take the old RemoteConfig.
This allowed only setting exporttree when initially setting up a
remote, and not configuring it later after stuff might already be stored
in the remote.
Went with =yes rather than =true for consistency with other parts of
git-annex. Changed docs accordingly.
This commit was supported by the NSF-funded DataLad project.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
They were silently ignored, a reversion introduced in 6.20160527.
I don't like this regular git remote special case in enableremote, but I
can't see a way to get rid of it. So, check if the existing remote is
a Remote.Git
This commit was sponsored by Trenton Cronholm on Patreon.
Most remotes have an idempotent setup that can be reused for
enableremote, but in a few cases, it needs to tell which, and whether
a UUID was provided to setup was used.
This is groundwork for making initremote be able to provide a UUID.
It should not change any behavior.
Note that it would be nice to make the UUID always be provided to setup,
and make setup not need to generate and return a UUID. What prevented
this simplification is Remote.Git.gitSetup, which needs to reuse the
UUID of the git remote when setting it up, and so has to return that
UUID.
This commit was sponsored by Thom May on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
Removed the instance LensGpgEncParams RemoteConfig because it encouraged
code that does not take the RemoteGitConfig into account.
RemoteType's setup was changed to take a RemoteGitConfig,
although the only place that is able to provide a non-empty one is
enableremote, when it's changing an existing remote. This led to several
folow-on changes, and got RemoteGitConfig plumbed through.
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
This fixes all instances of " \t" in the code base. Most common case
seems to be after a "where" line; probably vim copied the two space layout
of that line.
Done as a background task while listening to episode 2 of the Type Theory
podcast.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
This is a git-remote-gcrypt encrypted special remote. Only sending files
in to the remote works, and only for local repositories.
Most of the work so far has involved making initremote work. A particular
problem is that remote setup in this case needs to generate its own uuid,
derivied from the gcrypt-id. That required some larger changes in the code
to support.
For ssh remotes, this will probably just reuse Remote.Rsync's code, so
should be easy enough. And for downloading from a web remote, I will need
to factor out the part of Remote.Git that does that.
One particular thing that will need work is supporting hot-swapping a local
gcrypt remote. I think it needs to store the gcrypt-id in the git config of the
local remote, so that it can check it every time, and compare with the
cached annex-uuid for the remote. If there is a mismatch, it can change
both the cached annex-uuid and the gcrypt-id. That should work, and I laid
some groundwork for it by already reading the remote's config when it's
local. (Also needed for other reasons.)
This commit was sponsored by Daniel Callahan.
