I got bitten several times in the past by the fact that local preferred
content expressions are not violated (even temporarily) in order to
satisfy numcopies or other remotes' preferred content expressions.
Mostly in the form of the local repo not allowing arbitrary files in
(e.g. because it's set to only want `present` files). This note I add
here explains how to get out of this situation with
`approxlackingcopies=1`.
It might be too specific for this manpage, but I didn't find a better
place to put it.
Eg when the destination is logged as containing a file, skip
actively checking that it does contain it.
Note that --fast does not prevent other verifications of content
location that are done in a copy --from --to. Perhaps it could, but this
change will already avoid the real unnecessary work of operating on
files that are already in the remote.
And avoiding other verifications
might cause it to fail if the location log thinks that --to does not
contain the content but does. Such complications with `git-annex copy
--to remote --fast` led to commit d006586cd0
which added a note that gets displayed when that fails, mentioning it
might be due to --fast being enabled.
copy --from --to is already complicated enough without needing to worry
about such edge cases, so continuing to doing some verification of
content location after the initial --fast filtering seems ok.
Sponsored-by: Dartmouth College's DANDI project
The gnuplot output is pretty good, but could still be improved with:
* more colors (repeating colors is confusing with a lot of repos)
* better positioning of the legend, making the plot wider and moving it
from over top of the graph
Sponsored-by: Kevin Mueller on Patreon
Only counting received and not dropped makes this show the bandwidth of
data coming into the repository, although only in a sense. Since
git-annex branch updates only happen at the end of a command, and we
don't know when a command started, it's only an approximation of the
actual bandwidth. (A previous git-annex branch update made have
happened in a different repository.)
It would be possible to also add a --dropped option, but I don't know
how useful that would be?
Sponsored-by: Nicholas Golder-Manning on Patreon
CSV format so it can be fed into a program to graph it.
Note that dead repositories are not yet handled so their sizes show as
nonzero after they are marked dead.
Sponsored-By: k0ld on Patreon
This can take a lot of memory. I decided to violate the usual rule in
git-annex that it operate in constant memory no matter how many annexed
objects. In this case, it would be hard to be fast without using a big
map of the location logs. The main difficulty here is that there can be
many git-annex branches and it needs to display a consistent view at a
point in time, which means merging information from multiple git-annex
branches.
I have not checked if there are any laziness leaks in this code. It
takes 1 gb to run in my big repo, which is around what I estimated
before writing it.
2 options that are documented are not yet implemented.
Small bug: With eg --when=1h, it will display at 12:00 then 1:10 if the
next change after 12:59 is then. Then it waits until after 2:10 to
display the next change. It ought to wait until after 2:00.
Sponsored-by: Brock Spratlen on Patreon
Factored out overLocationLogs from CmdLine.Seek, which can calculate this
pretty fast even in a large repo. In my big repo, the time to run git-annex
info went up from 1.33s to 8.5s.
Note that the "backend usage" stats are for annexed files in the working
tree only, not all annexed files. This new data source would let that be
changed, but that would be a confusing behavior change. And I cannot
retitle it either, out of fear something uses the current title (eg parsing
the json).
Also note that, while time says "402108maxresident" in my big repo now,
up from "54092maxresident", top shows the RES constant at 64mb, and it
was 48mb before. So I don't think there is a memory leak. I tried using
deepseq to force full evaluation of addKeyCopies and memory use didn't
change, which also says no memory leak. And indeed, not even calling
addKeyCopies resulted in the same memory use. Probably the increased memory
usage is buffering the stream of data from git in overLocationLogs.
Sponsored-by: Brett Eisenberg on Patreon
Windows: When git-annex init is installing hook scripts, it will
avoid ending lines with CR for portability.
Existing hook scripts that do have CR line endings will not be changed.
While it would be possible to have git-annex init upgrade them, users would
need to know to use that command to do that, and it would add complexity
that does not seem warranted for the portability benefit alone.
Sponsored-by: Luke T. Shumaker on Patreon
This allows getting rid of the ugly and error prone handling of
"bag of bytes" String in Remote.Helper.Encryptable.
Avoiding breakage like that dealt with by commit
9862d64bf9
And allows converting Utility.Gpg to use ByteString for IO, which is
a welcome change.
Tested the new git-annex interoperability with old, using all 3
encryption= types.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This does not improve Annex.Branch.files at all, since it still uses ++ to
combine the lists, so forcing all but the last one.
But when there are a lot of files in the private journal, it does avoid
--all (or a bare repo) from buffering the filenames in memory.
See commit 653b719472 for prior discussion of
this buffering.
Sponsored-by: Graham Spencer on Patreon
importfeed: Use caching database to avoid needing to list urls on every
run, and avoid using too much memory.
Benchmarking in my podcasts repo, importfeed got 1.42 seconds faster,
and memory use dropped from 203000k to 59408k.
Database.ImportFeed is Database.ContentIdentifier with the serial number
filed off. There is a bit of code duplication I would like to avoid,
particularly recordAnnexBranchTree, and getAnnexBranchTree. But these use
the persistent sqlite tables, so despite the code being the same, they
cannot be factored out.
Since this database includes the contentidentifier metadata, it will be
slightly redundant if a sqlite database is ever added for metadata. I
did consider making such a generic database and using it for this. But,
that would then need importfeed to update both the url database and the
metadata database, which is twice as much work diffing the git-annex
branch trees. Or would entagle updating two databases in a complex way.
So instead it seems better to optimise the database that
importfeed needs, and if the metadata database is used by another command,
use a little more disk space and do a little bit of redundant work to
update it.
Sponsored-by: unqueued on Patreon
The crash occurred because writeCreds got called twice, and writeFileProtected
neglected to close its file handle, so the file was open for write when
written the second time.
It seems unncessary and suboptimal that writeCreds gets called twice.
One call is from getRemoteCredPair and the other from setRemoteCredPair'.
What happens is that in the enableremote case, code that also runs at
initremote does unncessary work. Might be possible to improve that, but
I've gone for the simple fix.
Sponsored-by: k0ld on Patreon
git-annex only writes regular files there, but other things may drop junk
like empty .DAV directories around the tree. And trying to hash such things
can have weird and hard to understand effects. So it seems best to do a
small amount of work in statting the journal file to make sure it's a
regular file.
Sponsored-by: Jack Hill on Patreon
git-annex get with no parameters and annex.skipunknown = false
in a directory with no files tracked by git results in the same
failure as with a "." parameter.
It may be that git ls-files --error-unmatch changed behavior? Or this
was just wrong.
push: When on an adjusted branch, propagate changes to parent branch before
updating export remotes.
This is a somewhat redundant call to propigateAdjustedCommits, since it
also gets called at pushLocal time. That other one needs to come after
importing from importtree remotes though, and seekExportContent has to come
earlier, so I don't see a way to avoid doing it twice.
Note that git-annex sync also manages to avoid the problem, it's only
git-annex push that had the bug.
Sponsored-by: Leon Schuermann on Patreon
Fix more breakage caused by git's fix for CVE-2022-24765, this time
involving a remote (either local or ssh) that is a repository not owned by
the current user.
Sponsored-by: Dartmouth College's DANDI project
Removed the prior code that checked for keys used by current versions of
the files being acted on. It is redundant with the associated files
check (so long as the associated files database is always up-to-date,
which reconcileStaged should accomplish).
Sponsored-by: Luke T. Shumaker on Patreon
