Note that when this is specified and an older git-annex is used to
enableremote such a special remote, it will simply ignore the cost= field
and use whatever the default cost is.
In passing, fixed adb to support the remote.name.cost and
remote.name.cost-command configs.
Sponsored-by: Dartmouth College's DANDI project
When a web special remote does not have urlinclude/urlexclude
configured, make it respect the configuration of other web special
remotes and avoid using urls that match the config of another.
Note that the other web special remote does not have to be enabled.
That seems ok, it would have been extra work to check for only ones that
are enabled.
The implementation does mean that the web special remote re-parses
its own config once at startup, as well as re-parsing the configs of any
other web special remotes. This should be a very small slowdown
unless there are lots of web special remotes.
Sponsored-by: Dartmouth College's DANDI project
Allow initremote of additional special remotes with type=web, in addition
to the default web special remote.
When --sameas=web is used, these provide additional names for the web
special remote, and may also have their own additional configuration
(once there is any for the web special remote) and cost.
Sponsored-by: Dartmouth College's DANDI project
Remove closed bugs and todos that were last edited or commented before 2022.
Except for ones tagged projects/* since projects like datalad want to keep
around records of old deleted bugs longer.
Command line used:
for f in $(grep -l '|done\]\]' -- ./*.mdwn); do if ! grep -q "projects/" "$f"; then d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2022 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2022 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; fi; done
for f in $(grep -l '\[\[done\]\]' -- ./*.mdwn); do if ! grep -q "projects/" "$f"; then d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2022 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2022 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; fi; done
The moved bugs that link to [[done]] were not matching because it wanted
that to link to bugs/done, but it was a broken link after rename. Adding
a stub datalad/done page to avoid the broken link, and adjusting the
pagespec so those are listed.
This is to cut down on the number of files in bugs/, which makes it slow
to file new bug reports or update active bug reports. These old bugs
were about 1/3rd of the files in there. These projects want lists of
their old bugs to still be accessible, and have the lists on their
project pages, which will still list the old bugs.
Commands used:
for f in $(git grep -l '\[\[!tag projects/dandi\]\]'); do if grep -q 'done\]\]' "$f"; then git mv "$f" ../projects/dandi/bugs-done; g=$(echo "$f" | sed 's/.mdwn//'); if [ -d "$g" ]; then git mv "$g" ../projects/dandi/bugs-done; fi; fi; done
for f in $(git grep -l '\[\[!tag projects/repronim\]\]'); do if grep -q 'done\]\]' "$f"; then git mv "$f" ../projects/repronim/bugs-done; g=$(echo "$f" | sed 's/.mdwn//'); if [ -d "$g" ]; then git mv "$g" ../projects/repronim/bugs-done; fi; fi; done
for f in $(git grep -l '\[\[!tag projects/datalad\]\]'); do if grep -q 'done\]\]' "$f"; then git mv "$f" ../projects/datalad/bugs-done; g=$(echo "$f" | sed 's/.mdwn//'); if [ -d "$g" ]; then git mv "$g" ../projects/datalad/bugs-done; fi; fi; done
That assumes that bugs are not tagged by multiple projects at the same
time. Of the ones I moved, I've checked and none are.
Could do the same with todo/ but there are only 370 files in there, and
less than 84 of them could be moved this way, which does not seem likely
to produce a sizeable speedup.
Sponsored-by: Dartmouth College's Datalad project
In Makefile, listed additional deps of Build/Standalone. Without that,
it does not get updated for the change to Utility/LinuxMkLibs.hs when
compiling incrementally.
Sponsored-by: Dartmouth College's DANDI project
readish ignores a trailing string after a number, but to support values
like "YYYY:MM:DD" which it makes sense to compare lexographically,
require the whole string to be parsed as a number in order to enable
numeric comparison.
Sponsored-by: Max Thoursie on Patreon
Speed up git-annex upgrade (from v5) and init in a repository that has
submodules. Setting the config does not affect the submodules, so avoid
the work of getting status in them, which may involve using the smudge
filter etc.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Added --anything (and --nothing). Eg, git-annex find --anything will list
all annexed files whether or not the content is present. This is slightly
faster and clearer than --include=* or --exclude=*
While I can't imagine how --nothing will be used, preferred content
expressions already had anything and nothing, so might as well support both
as matching options as well.
Sponsored-by: Dartmouth College's Datalad project
Improve handling of some .git/annex/ subdirectories being on other
filesystems, in the bittorrent special remote, and youtube-dl integration,
and git-annex addurl.
The only one of these that I've confirmed to be a problem is in the
bittorrent special remote when .git/annex/tmp and .git/annex/othertmp are
on different filesystems.
As well as auditing for renameFile, also audited for createLink, all of
those are ok as are the other remaining renameFile calls. Also audited all
code paths that use .git/annex/othertmp, and did not find any other
cross-device problems. So, removing mention of othertmp needing to be on
the same device.
Sponsored-by: Dartmouth College's Datalad project
Change --metadata comparisons < > <= and >= to fall back to lexicographical
comparisons when one or both values being compared are not numbers.
Sponsored-by: Erik Bjäreholt on Patreon
Fix a hang that occasionally occurred during commands such as move.
(A bug introduced in 10.20220927, in
commit 6a3bd283b8)
The restage.log was kept locked while running a complex index refresh
action. In an unusual situation, that action could need to write to the
restage log, which caused a deadlock.
The solution is a two-stage process. First the restage.log is moved to a
work file, which is done with the lock held. Then the content of the work
file is read and processed, which happens without the lock being held.
This is all done in a crash-safe manner.
Note that streamRestageLog may not be fully safe to run concurrently
with itself. That's ok, because restagePointerFiles uses it with the
index lock held, so only one can be run at a time.
streamRestageLog does delete the restage.old file at the end without
locking. If a calcRestageLog is run concurrently, it will either see the
file content before it was deleted, or will see it's missing. Either is
ok, because at most this will cause calcRestageLog to report more
work remains to be done than there is.
Sponsored-by: Dartmouth College's Datalad project
The splitting of the tests into parts for parallelism made --pattern
do extra work, because init tests have to be run for each part, but
many of the parts are empty.
For example, git-annex test --pattern '/move (ssh remote)/'
took 12 seconds to run before. This improves the runtime to 4 seconds.
Sponsored-by: Dartmouth College's Datalad project
Debian is going to drop youtube-dl which is not active upstream, and yt-dlp
is the replacement. This will make it be used if youtube-dl gets removed.
If an old version of youtube-dl remains installed, git-annex will still use
it. That might not be desirable, but changing git-annex to use yt-dlp in
preference to youtube-dl when both are installed risks breaking when
the user has annex.youtube-dl-options set to something that is supported
by youtube-dl, but not by yt-dlp.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
init: Avoid scanning for annexed files, which can be lengthy in a
large repository. Instead that scan is done on demand. This lets git-annex
init be run and some query commands be used in a repository without
waiting.
Note that autoinit already behaved this way, so while this will mean some
commands like git-annex get/unlock/add will do the scan the first time run,
that is not really a significant behavior change.
And, it's really better to have a consistent behavior. The reason for
the inconsistency was a strange bug discussed in
b3c4579c79. Avoiding reconcileStaged in
init will keep avoiding whatever that was.
Sponsored-by: Dartmouth College's DANDI project
Increasing the size of the queue 10x makes git-annex init 7% faster in a
repository with 86000 annexed files.
The memory use goes up, from 70876 kb to 85376 kb.
Avoids database querying overhead when the database is newly created.
In the large repository where git-annex init took 24 seconds, this sped it
up to 20.47 seconds, a speedup of around 15%.
Sponsored-by: Dartmouth College's DANDI project
export: Fix a bug that left a file on a special remote when two files with
the same content were both deleted in the exported tree.
Case of the wrong data structure leading to the wrong result.
The DiffMap now contains all the old filenames, and all the new filenames.
Note that, when 2 files with the same content are both renamed,
it only renames the first, but deletes and re-exports the second.
Improving that is possible, but it would need to use a different temporary
filename. Anyway, that is an unusual case, and there are known to be other
unusual cases where export does not rename with maximum efficiency, IIRC.
(Or maybe this is the case that I remember?)
Sponsored-by: Dartmouth College's OpenNeuro project
The initTests have to be run once per part, and a point of diminishing
returns can be reached where more work is being done to set up for 1 or
2 tests than to run them.
This is better than a hard cap of -J8 or so, because it lets other
things than these particular tests still be parallelized at -J16.
Sponsored-by: Dartmouth College's Datalad project
