Using the usual url download machinery even allows these urls to need
http basic auth, which is prompted for with git-credential. Which opens
the possibility for urls that contain a secret to be used, eg the cipher
for encryption=shared. Although the user is currently on their own
constructing such an url, I do think it would work.
Limited to httpalso for now, for security reasons. Since both httpalso
(and retrieving this very url) is limited by the usual
annex.security.allowed-ip-addresses configs, it's not possible for an
attacker to make one of these urls that sets up a httpalso url that
opens the garage door. Which is one class of attacks to keep in mind
with this thing.
It seems that there could be either a git-config that allows other types
of special remotes to be set up this way, or special remotes could
indicate when they are safe. I do worry that the git-config would
encourage users to set it without thinking through the security
implications. One remote config might be safe to access this way, but
another config, for one with the same type, might not be. This will need
further thought, and real-world examples to decide what to do.
And use it to set annex-config-uuid in git config. This makes
using the origin special remote work after cloning.
Without the added Logs.Remote.configSet, instantiating the remote will
look at the annex-config-uuid's config in the remote log, which will be
empty, and so it will fail to find a special remote.
The added deletion of files in the alternatejournaldir is just to make
100% sure they don't get committed to the git-annex branch. Now that
they contain things that definitely should not be committed.
An incremental push that gets converted to a full push due to this
config results in the inManifest having just one bundle in it, and the
outManifest listing every other bundle. So it actually takes up more
space on the special remote. But, it speeds up clone and fetch to not
have to download a long series of bundles for incremental pushes.
When building an adjusted unlocked branch, make pointer files executable
when the annex object file is executable.
This slows down git-annex adjust --unlock/--unlock-present by needing to
stat all annex object files in the tree. Probably not a significant
slowdown compared to other work they do, but I have not benchmarked.
I chose to leave git-annex adjust --unlock marked as stable, even though
get or drop of an object file can change whether it would make the pointer
file executable. Partly because making it unstable would slow down
re-adjustment, and partly for symmetry with the handling of an unlocked
pointer file that is executable when the content is dropped, which does not
remove its execute bit.
cleanupInitialization gets run when an exception is thrown, so needs to
avoid throwing exceptions itself, as that would hide the error message
that the user needs to see.
When exporttree=yes is also set. Probably it would also be possible to
support ones with only importtree=yes, by enabling exporttree=yes for
the remote only when using git-remote-annex, but let's keep this
simple... I'm not sure what gets recorded in .git/annex/ state
differently in the two cases that might cause a problem when doing that.
Note that the full annex:: urls generated and displayed for such a
remote omit the importree=yes. Which is ok, cloning from such an url
uses an exporttree=remote, but the git-annex branch doesn't get written
by this program, so once the real config is available from the git-annex
branch, it will still function as an importree=yes remote.
This git bug also broke git-lfs, and I am confident it will be reverted
in the next release.
For now, cloning from an annex:: url wastes some bandwidth on the next
pull by not caching bundles locally.
If git doesn't fix this in the next version, I'd be tempted to rethink
whether bundle objects need to be cached locally. It would be possible to
instead remember which bundles have been seen and their heads, and
respond to the list command with the heads, and avoid unbundling them
agian in fetch. This might even be a useful performance improvement in
the latter case. It would be quite a complication to a currently simple
implementation though.
This fixes pushing a new ref that is the same as something already
pushed. In findotherprereq, it compares two shas, which didn't work when
one is actually not a sha but a ref.
This is one of those cases where Sha being an alias for Ref makes it
hard to catch mistakes. One of these days those need to be
differentiated at the type level, but not today..
Check explicitly for an annex:: url, not just any url. While no built-in
special remotes set an url, except ones that can be synced with, it
seems possible that some external special remote sets an url for its own
use, but did not expect it to be used by git-annex sync et al.
The assistant also syncs with them.
Locally record the manifest before uploading it or any bundles,
and read it on the next push. Any bundles from the push that are
not included in the currently being pushed manifest will get added
to the outManifest, and so eventually get deleted.
This deals with an interrupted push that is not resumed and instead
something else is pushed. And it deals with a push race that overwrites
the manifest.
Of course, this can't help if one of those situations is followed by
the local repo being deleted. But that's equivilant to doing a git-annex
copy of a new annexed file to a special remote and then deleting the
special repo w/o pushing. In either case the special remote ends up with
a object in it that git-annex doesn't know about.
This avoids some apparently otherwise unsolveable problems involving
races that resulted in the manifest listing bundles that were deleted.
Removed the annex-max-git-bundles config because it can't actually
result in deleting old bundles. It would still be possible to have a
config that controls how often to do a full push, which would avoid
needing to download too many bundles on clone, as well as needing to
checkpresent too many bundles in verifyManifest. But it would need a
different name and description.
Added a backup manifest key, which is used if the main manifest key is
not present. When uploading a new Manifest, it makes sure that it never
drops one key except when the other key is present.
It's entirely possible for the two manifest keys to get out of sync, due
to races. The main one wins when it's present, it is possible for the
main one being dropped to expose the backup one, which has a different
push recorded.
On push, first try to drop all outManifest keys listed in the current
manifest file, which resumes from an interrupted push that didn't
get a chance to delete those keys.
The new manifest gets its outManifest populated with the keys that were
in the old manifest, plus any of the keys that were unable to be
dropped.
Note that it would be possible for uploadManifest to skip dropping old
keys at all. The old keys would get dropped on the next push. But it
seems better to delete stuff immediately rather than waiting. And the
extra work is limited to push and typically is small.
A remote where dropKey always fails will result in an outManifest that
grows longer and longer. It would be possible to check if the remote
has appendonly = True and avoid populating the outManifest. Of course,
an appendonly remote will grow with every git push anyway. And currently
only Remote.GitLFS sets that, which can't be used as a git-remote-annex
remote anyway.
Implemented alternateJournal, which git-remote-annex
uses to avoid any writes to the git-annex branch while setting up
a special remote from an annex:: url.
That prevents the remote.log from being overwritten with the special
remote configuration from the url, which might not be 100% the same as
the existing special remote configuration.
And it prevents an overwrite deleting of other stuff that was
already in the remote.log.
Also, when the branch was created by git-remote-annex, only delete it
at the end if nothing else has been written to it by another command.
This fixes the race condition described in
797f27ab05, where git-remote-annex
set up the branch and git-annex init and other commands were
run at the same time and their writes to the branch were lost.
This turns out to only be necessary is edge cases. Most of the
time, git-annex unused --from remote doesn't see git-remote-annex keys
at all, because it does not record a location log for them.
On the other hand, git-annex unused does find them, since it does not
rely on the location log. And that's good because they're a local cache
that the user should be able to drop.
If, however, the user ran git-annex unused and then git-annex move
--unused --to remote, the keys would have a location log for that
remote. Then git-annex unused --from remote would see them, and would
consider them unused. Even when they are present on the special remote
they belong to. And that risks losing data if they drop the keys from
the special remote, but didn't expect it would delete git branches they
had pushed to it.
So, make git-annex unused --from skip git-remote-annex keys whose uuid
is the same as the remote.
I hope to support importtree=yes eventually, but it does not currently
work.
Added remote.<name>.allow-encrypted-gitrepo that needs to be set to
allow using it with encrypted git repos.
Note that even encryption=pubkey uses a cipher stored in the git repo
to encrypt the keys stored in the remote. While it would be possible to
not encrypt the GITBUNDLE and GITMANIFEST keys, and then allow using
encryption=pubkey, it doesn't currently work, and that would be a
complication that I doubt is worth it.
Updating the remote list needs the config to be written to the git-annex
branch, which was not done for good reasons. While it would be possible
to instead use Remote.List.remoteGen without writing to the branch, I
already have a plan to discard git-annex branch writes made by
git-remote-annex, so the simplest fix is to write the config to the
branch.
Sponsored-by: k0ld on Patreon
Put the annex objects in .git/annex/objects/ inside the export remote.
This way, when importing from the remote, they will be filtered out.
Note that, when importtree=yes, content identifiers are used, and this
means that pushing to a remote updates the git-annex branch. Urk.
Will need to try to prevent that later, but I already had a todo about
that for other reasons.
Untested!
Sponsored-By: Brock Spratlen on Patreon
Otherwise, it can be confusing to clone from a wrong url, since it fails
to download a manifest and so appears as if the remote exists but is empty.
Sponsored-by: Jack Hill on Patreon
This will eventually be used to recover from an interrupted fullPush
and drop the old bundle keys it was unable to delete.
Sponsored-by: Luke T. Shumaker on Patreon
Update its todo with remaining items.
Add changelog entry.
Simplified internals document to no longer be notes to myself, but
target users who want to understand how the data is stored
and might want to extract these repos manually.
Sponsored-by: Kevin Mueller on Patreon
Making GITBUNDLE be in the backend list allows those keys to be
hashed to verify, both when git-remote-annex downloads them, and by other
transfers and by git fsck.
GITMANIFEST is not in the backend list, because those keys will never be
stored in .git/annex/objects and can't be verified in any case.
This does mean that git-annex version will include GITBUNDLE in the list
of backends.
Also documented these in backends.mdwn
Sponsored-by: Kevin Mueller on Patreon
Not quite there yet.
Also, changed the format of GITBUNDLE keys to use only one '-'
after the UUID. A sha256 does not contain that character, so can just
split at the last one.
Amusingly, the sha256 will probably not actually be verified. A git
bundle contains its own checksums that git uses to verify it. And if
someone wanted to replace the content of a GITBUNDLE object, they
could just edit the manifest to use a new one whose sha256 does verify.
Sponsored-by: Nicholas Golder-Manning
Changed the format of the url to use annex: rather than annex::
The reason is that in the future, might want to support an url that
includes an uriAuthority part, eg:
annex://foo@example.com:42/358ff77e-0bc3-11ef-bc49-872e6695c0e3?type=directory&encryption=none&directory=/mnt/foo/"
To parse that foo@example.com:42 as an uriAuthority it needs to start with
annex: rather than annex::
That would also need something to be done with uriAuthority, and also
the uriPath (the UUID) is prefixed with "/" in that example. So the
current parser won't handle that example currently. But this leaves the
possibility for expansion.
Sponsored-by: Joshua Antonishen on Patreon
The UUID is included in the GITMANIFEST in order to allow a single
key/value store to be used to store several special remotes, without any
namespacing. In that situation though, if the same ref is pushed to two
special remotes, it will result in git bundles with the same content.
Which is ok, until a re-push happens to one of the special remote.
At that point, the old git bundle will be deleted. That will prevent
fetching it from the other special remote, where the re-push has not
happened.
Adding the UUID avoids this problem.
And document remote.<name>.git-remote-annex-max-bundles which will
configure it.
datalad-annex uses a similar url format, but with some enhancements.
See https://github.com/datalad/datalad-next/blob/main/datalad_next/gitremotes/datalad_annex.py
I added the UUID to the URL, because it is needed in order to pick out which
manifest file to use. The design allows for a single key/value store to have
several special remotes all stored in it, and so the manifest includes
the UUID in its name.
While datalad-annex allows datalad-annex::<url>?, and allows referencing
peices of the url in the parameters, needing the UUID prevents
git-remote-annex from supporting that syntax. And anyway, it is a
complication and I want to keep things simple for now.
Sponsored-by: unqueued on Patreon
Added to git-annex_proxies todo because this is something OpenNeuro
would need in order to use the git-annex proxy.
Sponsored-by: Dartmouth College's OpenNeuro project
