This does not improve Annex.Branch.files at all, since it still uses ++ to
combine the lists, so forcing all but the last one.
But when there are a lot of files in the private journal, it does avoid
--all (or a bare repo) from buffering the filenames in memory.
See commit 653b719472 for prior discussion of
this buffering.
Sponsored-by: Graham Spencer on Patreon
importfeed: Use caching database to avoid needing to list urls on every
run, and avoid using too much memory.
Benchmarking in my podcasts repo, importfeed got 1.42 seconds faster,
and memory use dropped from 203000k to 59408k.
Database.ImportFeed is Database.ContentIdentifier with the serial number
filed off. There is a bit of code duplication I would like to avoid,
particularly recordAnnexBranchTree, and getAnnexBranchTree. But these use
the persistent sqlite tables, so despite the code being the same, they
cannot be factored out.
Since this database includes the contentidentifier metadata, it will be
slightly redundant if a sqlite database is ever added for metadata. I
did consider making such a generic database and using it for this. But,
that would then need importfeed to update both the url database and the
metadata database, which is twice as much work diffing the git-annex
branch trees. Or would entagle updating two databases in a complex way.
So instead it seems better to optimise the database that
importfeed needs, and if the metadata database is used by another command,
use a little more disk space and do a little bit of redundant work to
update it.
Sponsored-by: unqueued on Patreon
The tricky thing about this turned out to be handling renames and reverts.
For that, it has to make two passes over the git log, and to avoid
buffering a possibly huge amount of logs in memory (ie the whole git log of
an entire repository!), runs git log twice.
(It might be possible to speed this up by asking git log to show a diff,
and so avoid needing to use catKey.)
Sponsored-By: Brock Spratlen on Patreon
Removed the dontCheck repoExists, because running it in a repo that has not
been initialized yet would update location log with nouuid. And I guess
it's ok for it to only support running in git-annex repos.
Only display warning when git-annex sync (without --content or
--no-content) is used with repositories that have preferred content
configured.
Sponsored-by: Leon Schuermann on Patreon
I considered a more wide-ranging config option to make other commands
also show dead repositories. But it would be difficult to implement that
because Remote.keyLocations is used to get locations, filtering out dead
repos, and commands like get then try to use those locations. So a config
setting would make dead repos sometimes be acted on by commands.
Sponsored-by: unqueued on Patreon
Using == and != proved too hard to read, so went with [TRUE] and [FALSE]
after the term. I would kind of liked to have used emojis for a green
check and red X, but probably that is too fancy to be a good idea.
Make --explain output be inside [ ] with whitespace around them, to
avoid it ending with eg "[FALSE]]" and to make it easier to visually
find the start of it.
Sponsored-by: Dartmouth College's DANDI project
This ended up having an interface like sync, rather than like get/copy/drop.
That let it be implemented in terms of sync, which took a lot less code.
Also, it lets it handle many of the edge cases that sync does, such as
getting files that are not visible in a --hide-missing branch, and sending
files to exporttree remotes.
As well as being easier to implement, `git-annex satisfy myremote` makes
sense as it satisfies the preferred content settings of the remote.
`git-annex satisfy somefile` does not form a sentence that makes sense. So
while -C can be a little bit annoying, it still makes sense to have this
syntax.
Note that, while I initially thought this would also satisfy numcopies, it
does not. Arguably it ought to. But, sync does not send files in order to
satisfy numcopies, it only sends files to satisfy preferred content. And
it's important that this transfer the same files as sync does, because
it will probably be used in a workflow where the user sometimes syncs and
sometimes satisfies, and does not expect satisfy to do things that sync
would not do.
(Also opened a new bug that also affects sync et all, not only this command.)
Sponsored-by: Nicholas Golder-Manning on Patreon
This was already possible, but it was rather hard to come up with the
complex shell command needed.
Note that the diff output starts with "diff a/... b/...".
I left off the "--git" because it's not a git format diff.
* config: Added the --show-origin and --for-file options.
* config: Support annex.numcopies and annex.mincopies.
There is a little bit of redundancy here with other code elsewhere that
combines the various configs and selects which to use. But really only
for the special case of annex.numcopies, which is a git config that does
not override the annex branch setting and for annex.mincopies, which does
not have a git config but does have gitattributes settings as well as the
annex branch setting.
That seems small enough, and unlikely enough to grow into a mess that it was
worth supporting annex.numcopies and annex.mincopies in git-annex config
--show-origin. Because these settings are a prime thing that someone might
get confused about and want to know where they were configured.
And, it followed that git-annex config might as well support those two
for --set and --get as well. While this is redundant with the speclialized
commands, it's only a little code and it makes it more consistent.
Note that --set does not have as nice output as numcopies/mincopies
commands in some special cases like setting to 0 or a negative number.
It does avoid setting to a bad value thanks to the smart
constructors (eg configuredNumCopies).
As for other git-annex branch configurations that are not set by git-annex
config, things like trust and wanted that are specific to a repository
don't map to a git config name, so don't really fit into git-annex config.
And they are only configured in the git-annex branch with no local override
(at least so far), so --show-origin would not be useful for them.
Sponsored-by: Dartmouth College's DANDI project
Large speed up to importing trees from special remotes that contain a lot
of files, by only processing changed files.
Benchmarks:
Importing from a special remote that has 10000 files, that have all been
imported before, and 1 new file sped up from 26.06 to 2.59 seconds.
An import with no change and 10000 unchanged files sped up from 24.3 to
1.99 seconds.
Going up to 20000 files, an import with no changes sped up from
125.95 to 3.84 seconds.
Sponsored-by: k0ld on Patreon
Consistency with sync and internal consistency is more important than
consistency with the assistant, which is not itself consistent about
what it does when run in a subdirectory.
Note that with -C, it will still commit staged changes to files outside
the directory. Like sync does. Presumably if the user is manually
staging things, then running this command, they intend to build up a
commit.
Sponsored-by: unqueued on Patreon
assist: New command, which is the same as git-annex sync but with
new files added and content transferred by default.
(Also this fixes another reversion in git-annex sync,
--commit --no-commit, and --message were not enabled, oops.)
See added comment for why git-annex assist does commit staged
changes elsewhere in the work tree, but only adds files under
the cwd.
Note that it does not support --no-commit, --no-push, --no-pull
like sync does. My thinking is, why should it? If you want that
level of control, use git commit, git annex push, git annex pull.
Sync only got those options because pull and push were not split
out.
Sponsored-by: k0ld on Patreon
When used without --content or --no-content, warn about the upcoming
transition, and suggest using one of the options, or setting
annex.synccontent.
Sponsored-by: Brett Eisenberg on Patreon
Split out two new commands, git-annex pull and git-annex push. Those plus a
git commit are equivilant to git-annex sync.
In a sense, git-annex sync conflates 3 things, and it would have been
better to have push and pull from the beginning and not sync. Although
note that git-annex sync --content is faster than a pull followed by a
push, because it only has to walk the tree once, look at preferred
content once, etc. So there is some value in git-annex sync in speed, as
well as user convenience.
And it would be hard to split out pull and push from sync, as far as the
implementaton goes. The implementation inside sync was easy, just adjust
SyncOptions so it does the right thing.
Note that the new commands default to syncing content, unless
annex.synccontent is explicitly set to false. I'd like sync to also do
that, but that's a hard transition to make. As a start to that
transition, I added a note to git-annex-sync.mdwn that it may start to
do so in a future version of git-annex. But a real transition would
necessarily involve displaying warnings when sync is used without
--content, and time.
Sponsored-by: Kevin Mueller on Patreon
Had to convert uninit to do everything that can error out inside a
CommandStart. This was harder than feels nice.
(Also, in passing, converted CommandCheck to use a data type, not a
weird number that it was not clear how it managed to be unique.)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Seems unlikely to be too useful, but who knows.
Moved the checkSafeConfig call to happen after an action is started, so
it will be captured by --json-error-messages
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Including special --whatelse handling.
Otherwise, it seems unlikely to be too useful, but who knows.
Refactored code to call starting before displaying error messages.
This makes the error messages be captured by --json-error-messages
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Seems unlikely to be very useful, but trivial.
And, this completes the story that git-annex sync does not need json,
since every sub-operation is available in a command that does support json.
(Well, except for committing, but that's not a git-annex command.)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Both -J and --json needed importfeed to be refactored to use commandAction.
That was difficult, because of the interrelated nature of downloading feeds
and then downloading files from feeds, both of which needed to use
commandAction. And then checking for problems in feeds has to come after
these actions, which may be run as background jobs.
As for --json support, it's most of the way there, but still has some
warts, so I didn't enable jsonOptions yet. The warts include:
- An initial empty json record is displayed by getCache.
- Input is not populated, should be feed url
- feedProblem at end will not be captured by --json-error-messages
(see FIXME)
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Also fix support for operating on multiple pairs of files and keys.
Moved notAnnexed to inside starting, so error message will get into the json.
Cannot include the key in the starting as it's not known yet, so instead
add it to the json later.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Dunno how useful this will be, since about all that's accessible from
the json is whether it succeeded or failed, and the error messages
which were already on stderr.
Note that, when autoenabling a special remote, it would be possible for
one to stop and prompt or output not using Messages and so not output as
part of the json. I don't think that happens, but I'm not 100% sure
something doesn't manage to break it. Of course, the same could be the
case for commands that transfer objects. Using Annex.Init.autoEnableSpecialRemotes
in --json mode would avoid the problem, but I've chosen to wait until I
know it's needed to use it.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Generalized AddJSONActionItemField to allow it to add several fields. Not entirely
happy with that, since the names of the fields have to be carefully chosen to
not conflict with other json fields. And fields added that way can't be parsed
back in FromJSON, except for the "fields" field that is special cased for metadata.
Still, I couldn't see another way to do it.
Also, omit file:null from the json output. Which does affect other commands,
eg git-annex whereis --all --json. Hopefully that won't break something that expects
a null file. If it did, that could be reverted, but it would be ugly to have
file:null in the unused --json
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
For expire, the normal output is unchanged, but the --json output includes the uuid
in machine parseable form. Which could be very useful for this somewhat obscure
command. That needed ActionItemUUID to be implemented, which seemed like a lot
of work, but then ---
I had been going to skip implementing them for trust, untrust, dead, semitrust,
and describe, but putting the uuid in the json is useful information, it tells
what uuid git-annex picked given the input. It was not hard to support
these once ActionItemUUID was implemented.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This also changes addunused to display the names of the files that it adds.
That seems like a general usability improvement, and not displaying the input
number does not seem likely to be a problem to a user, since the filename
is based on the key. Displaying the filename was necessary to get it and the key
included in the json.
dropunused does not include the key in the json. It would be possible to
add, but would need more changes. And I doubt that dropunused --json
would be used in a situation where a program cared which keys were
dropped. Note that drop --unused does have the key in its json, so such
a program could just use it. Or could just dropkey --batch with the
specific keys it wants to drop if it cares about specific keys.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Also in passing the --all display was fixed up to not quote keys like filenames.
Note that the check added to compareChanges was needed to avoid logging when
nothing changed.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
This spams the user with a lot of messages, but it seems like busywork to
avoid that and only warn once, since this warning will go away when it gets
implemented.
Also fix parsing of the octal value.
Sponsored-by: Kevin Mueller on Patreon
When a nonexistant file is passed to a command and --json-error-messages
is enabled, output a JSON object indicating the problem.
(But git ls-files --error-unmatch still displays errors about such files in
some situations.)
I don't like the duplication of the name of the command introduced by this,
but I can't see a great way around it. One way would be to pass the Command
instead.
When json is not enabled, the stderr is unchanged. This is necessary
because some commands like find have custom output. So dislaying
"find foo not found" would be wrong. So had to complicate things with
toplevelFileProblem having different output with and without json.
When not using --json-error-messages but still using --json, it displays
the error to stderr, but does display a json object without the error. It
does have an errorid though. Unsure how useful that behavior is.
Sponsored-by: Dartmouth College's Datalad project
This reverts commit a325524454.
Turns out this was predicated on an incorrect belief that json output
didn't already sometimes lack the "key" field. Since json output already
can when `giveup` was used, it seems unncessary to add a whole new
option for this.
