Only implemented server side, not used client side yet.
And not yet implemented for proxies/clusters, for which there's a build
warning about unhandled cases.
This is P2P protocol version 3. Probably will be the only change in that
version..
Added a dependency on clock to access a monotonic clock.
On i386-ancient, that is at version 0.2.0.0.
Still needs some work.
The reason that the waitv is necessary is because without it,
runNet loops back around and reads the next protocol message. But it's
not finished reading the whole bytestring yet, and so it reads some part
of it.
Rejected the idea of automatically instantiating remotes for proxies-of-proxies.
That needs cycle protection, while the current behavior, which happened
for free, is that running git-annex updateproxy on the proxy can be used
to configure it, but only for topologies that actually exist.
Avoid `git-annex sync --content` etc from operating on cluster nodes by default
since syncing with a cluster implicitly syncs with its nodes. This avoids a
lot of unncessary work when a cluster has a lot of nodes just in checking
if each node's preferred content is satisfied. And it avoids content
being sent to nodes individually, so instead syncing with clusters always
fanout uploads to nodes.
The downside is that there are situations where a cluster's preferred content
settings can be met, but those of its nodes are not. Or where a node does not
contain a key, but the cluster does, and there are not enough copies of the key
yet, so it would be desirable the send it there. I think that's an acceptable
tradeoff. These kind of situations are ones where the cluster itself should
probably be responsible for copying content to the node. Which it can do much
less expensively than a client can. Part of the balanced preferred content
design that I will be working on in a couple of months involves rebalancing
clusters, so I expect to revisit this.
The use of annex-sync config does allow running git-annex sync with a specific
node, or nodes, and it will sync with it. And it's also possible to set
annex-sync git configs to make it sync with a node by default. (Although that
will require setting up an explicit git remote for the node rather than relying
on the proxied remote.)
Logs.Cluster.Basic is needed because Remote.Git cannot import Logs.Cluster
due to a cycle. And the Annex.Startup load of clusters happens
too late for Remote.Git to use that. This does mean one redundant load
of the cluster log, though only when there is a proxy.
Dropping from a cluster drops from every node of the cluster.
Including nodes that the cluster does not think have the content.
This is different from GET and CHECKPRESENT, which do trust the
cluster's location log. The difference is that removing from a cluster
should make 100% the content is gone from every node. So doing extra
work is ok. Compare with CHECKPRESENT where checking every node could
make it very expensive, and the worst that can happen in a false
negative is extra work being done.
Extended the P2P protocol with FAILURE-PLUS to handle the case where a
drop from one node succeeds, but a drop from another node fails. In that
case the entire cluster drop has failed.
Note that SUCCESS-PLUS is returned when dropping from a proxied remote
that is not a cluster, when the protocol version supports it. This is
because P2P.Proxy does not know when it's proxying for a single node
cluster vs for a remote that is not a cluster.
Client side support for SUCCESS-PLUS and ALREADY-HAVE-PLUS
is complete, when a PUT stores to additional repositories
than the expected on, the location log is updated with the
additional UUIDs that contain the content.
Started implementing PUT fanout to multiple remotes for clusters.
It is untested, and I fear fencepost errors in the relative
offset calculations. And it is missing proxying for the protocol
after DATA.
CONNECT is not supported by git-annex-shell p2pstdio, but for proxying
to tor-annex remotes, it will be supported, and will make a git pull/push
to a proxied remote work the same with that as it does over ssh,
eg it accesses the proxy's git repo not the proxied remote's git repo.
The p2p protocol docs say that NOTIFYCHANGES is not always supported,
and it looked annoying to implement it for this, and it also seems
pretty useless, so make it be a protocol error. git-annex remotedaemon
will already be getting change notifications from the proxy's git repo,
so there's no need to get additional redundant change notifications for
proxied remotes that would be for changes to the same git repo.
Added to git-annex_proxies todo because this is something OpenNeuro
would need in order to use the git-annex proxy.
Sponsored-by: Dartmouth College's OpenNeuro project
importfeed: Use caching database to avoid needing to list urls on every
run, and avoid using too much memory.
Benchmarking in my podcasts repo, importfeed got 1.42 seconds faster,
and memory use dropped from 203000k to 59408k.
Database.ImportFeed is Database.ContentIdentifier with the serial number
filed off. There is a bit of code duplication I would like to avoid,
particularly recordAnnexBranchTree, and getAnnexBranchTree. But these use
the persistent sqlite tables, so despite the code being the same, they
cannot be factored out.
Since this database includes the contentidentifier metadata, it will be
slightly redundant if a sqlite database is ever added for metadata. I
did consider making such a generic database and using it for this. But,
that would then need importfeed to update both the url database and the
metadata database, which is twice as much work diffing the git-annex
branch trees. Or would entagle updating two databases in a complex way.
So instead it seems better to optimise the database that
importfeed needs, and if the metadata database is used by another command,
use a little more disk space and do a little bit of redundant work to
update it.
Sponsored-by: unqueued on Patreon
This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
Support VERSION 2 in the external special remote protocol, which is
identical to VERSION 1, but avoids external remote programs neededing to
work around the above bug. External remote program that support
exporttree=yes are recommended to be updated to send VERSION 2.
Sponsored-by: Kevin Mueller on Patreon
When importing from versioned remotes, fix tracking of the content of
deleted files.
Only S3 supports versioning so far, so only it was affected.
But, the draft import/export interface for external remotes also seemed to
need a change, so that versionedExport could be set.
* Deal with clock skew, both forwards and backwards, when logging
information to the git-annex branch.
* GIT_ANNEX_VECTOR_CLOCK can now be set to a fixed value (eg 1)
rather than needing to be advanced each time a new change is made.
* Misuse of GIT_ANNEX_VECTOR_CLOCK will no longer confuse git-annex.
When changing a file in the git-annex branch, the vector clock to use is now
determined by first looking at the current time (or GIT_ANNEX_VECTOR_CLOCK
when set), and comparing it to the newest vector clock already in use in
that file. If a newer time stamp was already in use, advance it forward by
a second instead.
When the clock is set to a time in the past, this avoids logging with
an old timestamp, which would risk that log line later being ignored in favor
of "newer" line that is really not newer.
When a log entry has been made with a clock that was set far ahead in the
future, this avoids newer information being logged with an older timestamp
and so being ignored in favor of that future-timestamped information.
Once all clocks get fixed, this will result in the vector clocks being
incremented, until finally enough time has passed that time gets back ahead
of the vector clock value, and then it will return to usual operation.
(This latter situation is not ideal, but it seems the best that can be done.
The issue with it is, since all writers will be incrementing the last
vector clock they saw, there's no way to tell when one writer made a write
significantly later in time than another, so the earlier write might
arbitrarily be picked when merging. This problem is why git-annex uses
timestamps in the first place, rather than pure vector clocks.)
Advancing forward by 1 second is somewhat arbitrary. setDead
advances a timestamp by just 1 picosecond, and the vector clock could
too. But then it would interfere with setDead, which wants to be
overrulled by any change. So it could use 2 picoseconds or something,
but that seems weird. It could just as well advance it forward by a
minute or whatever, but then it would be harder for real time to catch
up with the vector clock when forward clock slew had happened.
A complication is that many log files contain several different peices of
information, and it may be best to only use vector clocks for the same peice
of information. For example, a key's location log file contains
InfoPresent/InfoMissing for each UUID, and it only looks at the vector
clocks for the UUID that is being changed, and not other UUIDs.
Although exactly where the dividing line is can be hard to determine.
Consider metadata logs, where a field "tag" can have multiple values set
at different times. Should it advance forward past the last tag?
Probably. What about when a different field is set, should it look at
the clocks of other fields? Perhaps not, but currently it does, and
this does not seems like it will cause any problems.
Another one I'm not entirely sure about is the export log, which is
keyed by (fromuuid, touuid). So if multiple repos are exporting to the
same remote, different vector clocks can be used for that remote.
It looks like that's probably ok, because it does not try to determine
what order things occurred when there was an export conflict.
Sponsored-by: Jochen Bartl on Patreon
