Avoid using curl when annex.security.allowed-ip-addresses is set but
neither annex.web-options nor annex.security.allowed-url-schemes is set to
a value that needs curl.
Bug introduced in 840bd50390
Sponsored-By: Brock Spratlen on Patreon
Fix behavior when importing a tree from a directory remote when the
directory does not exist. An empty tree was imported, rather than the
import failing. Merging that tree would delete every file in the
branch, if those files had been exported to the directory before.
The problem was that dirContentsRecursive returned [] when the directory
did not exist. Better for it to throw an exception. But in commit
74f0d67aa3 back in 2012, I made it never
theow exceptions, because exceptions throw inside unsafeInterleaveIO become
untrappable when the list is being traversed.
So, changed it to list the contents of the directory before entering
unsafeInterleaveIO. So exceptions are thrown for the directory. But still
not if it's unable to list the contents of a subdirectory. That's less of a
problem, because the subdirectory does exist (or if not, it got removed
after being listed, and it's ok to not include it in the list). A
subdirectory that has permissions that don't allow listing it will have its
contents omitted from the list still.
(Might be better to have it return a type that includes indications of
errors listing contents of subdirectories?)
The rest of the changes are making callers of dirContentsRecursive
use emptyWhenDoesNotExist when they relied on the behavior of it not
throwing an exception when the directory does not exist. Note that
it's possible some callers of dirContentsRecursive that used to ignore
permissions problems listing a directory will now start throwing exceptions
on them.
The fix to the directory special remote consisted of not making its
call in listImportableContentsM use emptyWhenDoesNotExist. So it will
throw an exception as desired.
Sponsored-by: Joshua Antonishen on Patreon
Significant startup speed increase by avoiding repeatedly checking if some
remote git-annex branch refs need to be merged when it is not newer.
One way this could happen is when there are 2 remotes that are themselves
connected. The git-annex branch on the first remote gets updated. Then the
second remote pulls from the first, and merges in its git-annex branch.
Then the local repo pulls from the second remote, and merges its git-annex
branch. At this point, a pull from the first remote will get a git-annex
branch that is not newer, but is not on the merged refs list.
In my big repo, git-annex startup time dropped from 4 seconds to 0.1 seconds.
There were 5 to 10 such remote refs out of 18 remotes.
Sponsored-by: Graham Spencer on Patreon
git-annex test hang when running git-annex add in an adjusted unlocked
branch. I couldn't seem to reproduce the hang outside the test suite.
Seems that the code added in 26a9ea12d1
was buggy, and as that commit was made without testing it, building with
unix-2.8 exposed the bug.
I don't fully understand the bug, which involves fdToHandle
and then closing the fd, vs closing the handle. May somehow involve
laziness or forcing around the S.hGet? Using hClose solved it
in any case.
(Also eliminated checkcontentfollowssymlinks to fix a build warning
when it's not used.)
And annex.largefiles and annex.addunlocked.
Also git-annex matchexpression --explain explains why its input
expression matches or fails to match.
When there is no limit, avoid explaining why the lack of limit
matches. This is also done when no preferred content expression is set,
although in a few cases it defaults to a non-empty matcher, which will
be explained.
Sponsored-by: Dartmouth College's DANDI project
Currently it only displays explanations of options like --in and --copies.
In the future, it should explain preferred content expression evaluation
and other decisions.
The explanations of a few things could be better. In particular,
"standard" will just appear as-is (or as "!standard" if it doesn't
match), rather than explaining why the standard preferred content expression
for the group matches or not.
Currently as implemented, it goes to stdout, and so commands like
git-annex find that have custom output will not display --explain
information. Perhaps that should change, dunno.
Sponsored-by: Dartmouth College's DANDI project
explain is a kind of debug message, but not formatted in the same way.
So it makes sense to reuse the debug machinery for it, since that is
already quite optimised.
Sponsored-by: Dartmouth College's DANDI project
yt-dlp when resumed was observed having written the same filename twice
into the file list. Perhaps once by the first download and once by the
resumed one?
This causes changes to the original branch to get merged with a single
sync. Before, it took 2 syncs; the first happened to update the synced/
branch, and the second merged changes from the synced/ branch into the
ajusted branch.
Using mergeToAdjustedBranch when tomerge == origbranch is probably
overkill, but it does work fine.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Bug fix: Re-running git-annex adjust or sync when in an adjusted branch
would overwrite the original branch, losing any commits that had been made
to it since the adjusted branch was created.
When git-annex adjust is run in this situation, it will display a warning
about the diverged branches.
When git-annex sync is run in this situation, mergeToAdjustedBranch
will merge the changes from the original branch to the adjusted branch.
So it does not need to display the divergence warning.
Note that for some reason, I'm needing to run sync twice for that to
happen. The first run does not do the merge and the second does. I'm unsure
why and so am not fully done with this bug.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Running git config --list inside .git then fails, so better to only
do that when --git-dir was specified explicitly. Otherwise, when the
repository is not bare, run the command inside the working tree.
Also make init detect when the uuid it just set cannot be read and fail
with an error, in case git changes something that breaks this later.
I still don't actually understand why git-annex add/assist -J2 was
affected but -J1 was not. But I did show that it was skipping writing to
the location log, because the uuid was NoUUID.
Sponsored-by: Graham Spencer on Patreon
Fixes a crash by git-annex repair when .git/annex/journal/ does not exist.
Normally the journal directory is created before withJournalHandle gets
run, but git-annex repair can be run in a situation where it does not
exist.
Rather than after it, which can leave one wondering what file it's
downloading.
youtubeDl should not ever return Right Nothing in normal operation,
becaause it's already asked youtube-dl if it supports the url. So it
would have to succeed at that, then not download any file, but also
exit successfully, in order for the new error message to display.
Also display the name of yt-dlp when using it.
Sometimes resuming an interrupted download will fail to resume and download
more files with different names. That resulted in the workdir having
multiple files at the end, which causes git-annex to give up because it
does not know what was downloaded.
To fix this, use a yt-dlp feature, which appends to a file the name of each
file after it's finished downloading it. So the presence of other cruft in
the workdir will not confuse git-annex.
* config: Added the --show-origin and --for-file options.
* config: Support annex.numcopies and annex.mincopies.
There is a little bit of redundancy here with other code elsewhere that
combines the various configs and selects which to use. But really only
for the special case of annex.numcopies, which is a git config that does
not override the annex branch setting and for annex.mincopies, which does
not have a git config but does have gitattributes settings as well as the
annex branch setting.
That seems small enough, and unlikely enough to grow into a mess that it was
worth supporting annex.numcopies and annex.mincopies in git-annex config
--show-origin. Because these settings are a prime thing that someone might
get confused about and want to know where they were configured.
And, it followed that git-annex config might as well support those two
for --set and --get as well. While this is redundant with the speclialized
commands, it's only a little code and it makes it more consistent.
Note that --set does not have as nice output as numcopies/mincopies
commands in some special cases like setting to 0 or a negative number.
It does avoid setting to a bad value thanks to the smart
constructors (eg configuredNumCopies).
As for other git-annex branch configurations that are not set by git-annex
config, things like trust and wanted that are specific to a repository
don't map to a git config name, so don't really fit into git-annex config.
And they are only configured in the git-annex branch with no local override
(at least so far), so --show-origin would not be useful for them.
Sponsored-by: Dartmouth College's DANDI project
It just so happens that everywhere that checks attrs other than
annex.largefiles parses the value further, and failed to parse
unspecifiedAttr in a way that behaved the same as if nothing was set. So
this is not a bug fix or behavior change. What it does so is prevent
future uses of checkAttr from needing to remember to handle checking for
this edge case.
Sponsored-by: Dartmouth College's DANDI project
This avoids bottlenecking on git check-ignore in a particular situation.
Also, there may have been a correctness issue with it not having updated it.
When the exportdb is already up-to-date, this is not expensive. And the
exportdb is updated elsewhere, so usually it is up-to-date.
Sponsored-by: Joshua Antonishen on Patreon
Speeds up sync in an adjusted branch by avoiding re-adjusting the branch
unncessarily, particularly when it is adjusted with --hide-missing or
--unlock-present.
When there are a lot of files, that was the majority of the time of a
--no-content sync.
Uses a log file, which is updated when content presence changes. This
adds a little bit of overhead to every file get/drop when on such an
adjusted branch. The overhead is minimal for get of any size of file,
but might be noticable for drop in some cases. It seems like a reasonable
trade-off. It would be possible to update the log file only at the end, but
then it would not happen if the command is interrupted.
When not in an adjusted branch, there should be no additional overhead.
(getCurrentBranch is an MVar read, and it avoids the MVar read of
getGitConfig.)
Note that this does not deal with situations such as:
git checkout master, git-annex get, git checkout adjusted branch,
git-annex sync. The sync won't know that the adjusted branch needs to be
updated. Dealing with that would add overhead to operation in non-adjusted
branches, which I don't like. Also, there are other situations like having
two adjusted branches that both need to be updated like this, and switching
between them and sync not updating.
This does mean a behavior change to sync, since it did previously deal
with those situations. But, the documentation did not say that it did.
The man pages only talk about sync updating the adjusted branch after
it transfers content.
I did consider making sync keep track of content it transferred (and
dropped) and only update the adjusted branch then, not to catch up to other
changes made previously. That would perform better. But it seemed rather
hard to implement, and also it would have problems with races with a
concurrent get/drop, which this implementation avoids.
And it seemed pretty likely someone had gotten used to get/drop followed by
sync updating the branch. It seems much less likely someone is switching
branches, doing get/drop, and then switching back and expecting sync to update
the branch.
Re-running git-annex adjust still does a full re-adjusting of the branch,
for anyone who needs that.
Sponsored-by: Leon Schuermann on Patreon
Introduced recently in commit 64fc34b3da.
adjustBranch changes the sha that is recorded for the current branch
(eg the adjusted branch). So, have to get the original sha before
calling it.
Sponsored-by: Jack Hill on Patreon
Updating an adjusted branch can take a while when there are a lot of
files. HEAD was detached at the start, so if eg git-annex sync was
interrupted at the wrong point, there was a possibly wide window where
it would leave the repo with HEAD detached.
There's still a window, just much narrower. I don't know if it's
possible to close the window entirely. While git can clearly update
the currently checked out branch in eg git merge, it doesn't seem to
provide another way to do it.
Sponsored-by: Graham Spencer on Patreon
Reading from the cidsdb is responsible for about 25% of the runtime of
an import. Since the cidmap is used to store the same information in
ram, the cidsdb is not written to during an import any longer. And so,
if it started off empty (and updateFromLog wasn't needed), those reads
can just be skipped.
This is kind of a cheesy optimisation, since after any import from any
special remote, the database will no longer be empty, so it's a single
use optimisation. But it's probably not uncommon to start by importing a
lot of files, and it can save a lot of time then.
Sponsored-by: Brock Spratlen on Patreon
Large speed up to importing trees from special remotes that contain a lot
of files, by only processing changed files.
Benchmarks:
Importing from a special remote that has 10000 files, that have all been
imported before, and 1 new file sped up from 26.06 to 2.59 seconds.
An import with no change and 10000 unchanged files sped up from 24.3 to
1.99 seconds.
Going up to 20000 files, an import with no changes sped up from
125.95 to 3.84 seconds.
Sponsored-by: k0ld on Patreon
For simplicity, I've not tried to make it handle History yet, so when
there is a history, a full import will still be done. Probably the right
way to handle history is to first diff from the current tree to the last
imported tree. Then, diff from the current tree to each of the
historical trees, and recurse through the history diffing from child tree
to parent tree.
I don't think that will need a record of the previously imported
historical trees, and so Logs.Import doesn't store them. Although I did
leave room for future expansion in that log just in case.
Next step will be to change importTree to importChanges and modify
recordImportTree et all to handle it, by using adjustTree.
Sponsored-by: Brett Eisenberg on Patreon
This gets the trees built, but it does not use them. Next step will be
to remember the tree for next time an import is done, and diff between
old and new trees to find the files that have changed.
Added --missing to the mktree parameters. That only disables a check, so
it's ok to do everywhere mktree is used. It probably also speeds up
mktree to disable the check.
Note that git fsck does not complain about the resulting tree objects
that point to shas that are not in the repository. Even with --strict.
A quick benchmark, importing 10000 files, this slowed it down
from 2:04.06 to 2:04.28. So it will more than pay for itself.
Sponsored-by: Luke Shumaker on Patreon
Speed up importing trees from special remotes somewhat by avoiding
redundant writes to sqlite database.
Before, import would write to both the git-annex branch and also to the
sqlite database. But then the next time it was run, needsUpdateFromLog
would see the branch had changed, so run updateFromLog, which would make
the same writes to the sqlite database a second time.
Now import writes only to the git-annex branch. The next time it's run,
needsUpdateFromLog sees that the branch has changed and so calls
updateFromLog, which updates the sqlite database.
Why defer the write to the sqlite database like this? It seems that it
could write to the database as it goes, and at the end call
recordAnnexBranchTree to indicate that the information in the git-annex
branch has all been written to the cidsdb. That would avoid the second
import doing extra work.
But, there could be other processes running at the same time, and one of
them may update the git-annex branch, eg merging a remote git-annex branch
into it. Any cids logs on that merged git-annex branch would not be
reflected in the cidsdb yet. If the import then called
recordAnnexBranchTree, the cidsdb would never get updated with that merged
information.
I don't think there's a good way to prevent, or to detect that situation.
So, it can't call recordAnnexBranchTree at the end. So it might as well
wait until the next run and do updateFromLog then. It could instead do
updateFromLog at the end, but it's going to check needsUpdateFromLog
at the beginning anyway.
Note that the database writes were queued, so there is already a cidmap
that is used to remember changes that the current process has made.
So, omitting database writes can't change the behavior of the current
process.
Also note that thirdpartypopulatedimport uses recordcidkeyindb, which
reflects what it already did. That code path does not use the cidmap,
but does not need to query it either. It might be possible to make that
code path also only update the git-annex branch and not the db, but I
haven't checked.
Sponsored-by: Noam Kremen on Patreon
I noticed git-annex was using a lot of CPU when downloading from youtube,
and was not displaying progress. Turns out that yt-dlp (and I think also
youtube-dl) sometimes only knows an estimated size, not the actual size,
and displays the progress output slightly differently for that. That broke
the parser. And, the parser was feeding chunks that failed to parse back
as a remainder, which caused it to try to re-parse the entire output each
time, so it got slower and slower.
Using --progress-template like this should avoid parsing problems as well
as future proof against output changes. But it will work with only yt-dlp.
So, this seemed like the right time to deprecate youtube-dl, and default
to yt-dlp when available.
git-annex will still use youtube-dl if that's all that's available.
However, since the progress parser for youtube-dl was buggy, and I don't
want to maintain two different progress parsers (especially since
youtube-dl is no longer in debian unstable having been replaced by
yt-dlp), made git-annex no longer try to parse youtube-dl's progress.
Also, updated docs for yt-dlp being default. It did not seem worth
renaming annex.youtube-dl-options and annex.youtube-dl-command.
Note that yt-dlp does not seem to document the fields available in the
progress template. I found them by reading the source and looking at
the templates it uses internally. Also note that the use of "i" (rather
than "s") in progressTemplate makes it display floats rounded to integers;
particularly the estimated total size can be a float. That also does not
seem to be documented but I assume is a python thing?
Sponsored-by: Joshua Antonishen on Patreon
This makes annexFileMode be just an application of setAnnexPerm',
which avoids having 2 functions that do different versions of the same
thing.
Fixes some buggy behavior for some combinations of core.sharedRepository
and umask.
Sponsored-by: Jack Hill on Patreon
These two missed setting it.
It rarely matters that the journal gets the right perm. But, when using
annex.alwayscommit=false, someone else may come along later and want
to append to the journal file.
It probably never matters what the sentinal perms are, but for
completeness..
Sponsored-by: Luke Shumaker on Patreon
This spams the user with a lot of messages, but it seems like busywork to
avoid that and only warn once, since this warning will go away when it gets
implemented.
Also fix parsing of the octal value.
Sponsored-by: Kevin Mueller on Patreon
New command, currently limited to changing autoenable= setting of a special remote.
It will probably never be used for more than that given the limitations on
it.
Sponsored-by: Brock Spratlen on Patreon
When displaying a ByteString like "💕", safeOutput operates on
individual bytes like "\240\159\146\149" and isControl '\146' = True,
so it got truncated to just "\240".
So, only treat the low control characters, and DEL, as control
characters.
Also split Utility.Terminal out of Utility.SafeOutput. The latter needs
win32, but Utility.SafeOutput is used by Control.Exception, which is
used by Setup.
Sponsored-by: Nicholas Golder-Manning on Patreon
I'm on the fence about this. Notice that pulling from a git remote can
pull branches that have escape sequences in their names. Git will
display those as-is. Arguably git should try harder to avoid that.
But, names of remotes are usually up to the local user, and autoenable
changes that, and so it makes sense that git chooses to display control
characters in names of remotes, and so autoenable needs to guard against
it.
Sponsored-by: Graham Spencer on Patreon
Seems unlikely to have a tab in a path, but it's not a control character
that needs to be prevented either.
Left \n \r \v and \a as other non-threatening control characters
that are still obnoxious to have in a filepath because of how it causes
issues with display and/or with shell scripting.
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
When the filenames are part of the git repository or other files that
might have attacker-controlled names, quote them in error messages.
This is fairly complete, although I didn't do the one in
Utility.DirWatcher.INotify.hs because that doesn't have access to
Git.Filename or Annex.
But it's also quite possible I missed some. And also while scanning for
these, I found giveup used with other things that could be attacker
controlled to contain control characters (eg Keys). So, I'm thinking
it would also be good for giveup to just filter out control characters.
This commit is then not the only line of defence, but just good
formatting when git-annex displays a filename in an error message.
Sponsored-by: Kevin Mueller on Patreon
As well as escape sequences, control characters seem unlikely to be desired when
doing addurl, and likely to trip someone up. So disallow them as well.
I did consider going the other way and allowing filenames with control characters
and escape sequences, since git-annex is in the process of escaping display
of all filenames. Might still be a better idea?
Also display the illegal filename git quoted when it rejects it.
Sponsored-by: Nicholas Golder-Manning on Patreon
Added StringContainingQuotedPath, which is used for ActionItemOther.
In the process, checked every ActionItemOther for those containing
filenames, and made them use quoting.
Sponsored-by: Graham Spencer on Patreon
This reverts commit 66eb63dd82.
git-annex init is the only thing that uses ensureCommit. So overriding
there will make later commits to the git-annex branch or by git-annex sync
fail.
It's ugly that git-annex init sets user.name and user.email, but it only
does it on systems that are badly configured.
