Each command that first checks preferred content (and/or required
content) and then does something that can change the sizes of
repositories needs to call prepareLiveUpdate, and plumb it through the
preferred content check and the location log update.
So far, only Command.Drop is done. Many other commands that don't need
to do this have been updated to keep working.
There may be some calls to NoLiveUpdate in places where that should be
done. All will need to be double checked.
Not currently in a compilable state.
This was caused by commit fb8ab2469d putting
an isPointerFile check in the wrong place. So if the file was not a pointer
file at that point, but got replaced by one before the file got locked
down, the pointer file would be ingested into the annex.
The fix is simply to move the isPointerFile check to after safeToAdd locks
down the file. Now if the file changes to a pointer file after the
isPointerFile check, ingestion will see that it changed after lockdown,
and will refuse to add it to the annex.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
This is to avoid inserting a cluster uuid into the location log when
only dead nodes in the cluster contain the content of a key.
One reason why this is necessary is Remote.keyLocations, which excludes
dead repositories from the list. But there are probably many more.
Implementing this was challenging, because Logs.Location importing
Logs.Cluster which imports Logs.Trust which imports Remote.List resulted
in an import cycle through several other modules.
Resorted to making Logs.Location not import Logs.Cluster, and instead
it assumes that Annex.clusters gets populated when necessary before it's
called.
That's done in Annex.Startup, which is run by the git-annex command
(but not other commands) at early startup in initialized repos. Or,
is run after initialization.
Note that is Remote.Git, it is unable to import Annex.Startup, because
Remote.Git importing Logs.Cluster leads the the same import cycle.
So ensureInitialized is not passed annexStartup in there.
Other commands, like git-annex-shell currently don't run annexStartup
either.
So there are cases where Logs.Location will not see clusters. So it won't add
any cluster UUIDs when loading the log. That's ok, the only reason to do
that is to make display of where objects are located include clusters,
and to make commands like git-annex get --from treat keys as being located
in a cluster. git-annex-shell certainly does not do anything like that,
and I'm pretty sure Remote.Git (and callers to Remote.Git.onLocalRepo)
don't either.
When imported along with Logs.Location, it can be an unused import and
it won't warn, due to reexports. The point if this is really to show
that Logs.Presence is not widely used, outside Logs/
Check explicitly for an annex:: url, not just any url. While no built-in
special remotes set an url, except ones that can be synced with, it
seems possible that some external special remote sets an url for its own
use, but did not expect it to be used by git-annex sync et al.
The assistant also syncs with them.
While redundant concurrent transfers were already prevented in most
cases, it failed to prevent the case where two different repositories were
sending the same content to the same repository. By removing the uuid
from the transfer lock file for Download transfers, one repository
sending content will block the other one from also sending the same
content.
In order to interoperate with old git-annex, the old lock file is still
locked, as well as locking the new one. That added a lot of extra code
and work, and the plan is to eventually stop locking the old lock file,
at some point in time when an old git-annex process is unlikely to be
running at the same time.
Note that in the case of 2 repositories both doing eg
`git-annex copy foo --to origin`
the output is not that great:
copy b (to origin...)
transfer already in progress, or unable to take transfer lock
git-annex: transfer already in progress, or unable to take transfer lock
97% 966.81 MiB 534 GiB/s 0sp2pstdio: 1 failed
Lost connection (fd:14: hPutBuf: resource vanished (Broken pipe))
Transfer failed
Perhaps that output could be cleaned up? Anyway, it's a lot better than letting
the redundant transfer happen and then failing with an obscure error about
a temp file, which is what it did before. And it seems users don't often
try to do this, since nobody ever reported this bug to me before.
(The "97%" there is actually how far along the *other* transfer is.)
Sponsored-by: Joshua Antonishen on Patreon
Except when a commit is made in a view, which changes metadata.
Make the assistant commit the git-annex branch after git commit of working
tree changes.
This allows using the annex.commitmessage-command in the assistant to
generate a commit message for the git-annex branch that relies on state
gathered during the commit of the working tree. Eg, it might reuse the
commit message.
Note that, when not using the assistant, a git-annex add still commits
the git-annex branch, so such a annex.commitmessage-command set up would
not work then. But if someone is using the assistant and wants
programmatic control over commit messages, this is useful. Someone not
using the assistant can get the same result by using annex.alwayscommit=false
during the git-annex add, and git-annex merge after they git commit.
pre-commit was never really intended to commit the git-annex branch
(except after recording changed metadata), but the assistant did sort of
rely on it. It does later commit the git-annex branch before pushing to
remotes, but I didn't want to risk building up lots of uncommitted changes
to it if that didn't happen frequently.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
It's trivial enough that it it's not worth factoring it out to somewhere
in common with Command.Undo and the assistant.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
The getSocket comment that mentioned using ":port"
in the hostname seems to have been incorrect or be out of date.
After all, the bug report came when the user first tried doing that,
and it didn't work.
Sponsored-by: the NIH-funded NICEMAN (ReproNim TR&D3) project
This aims to future-proof gpg key generation. OpenPGP is in flux with a
conflict over standards ongoing. It seems not unlikely that different
systems will have different gpg commands that support different algorithms.
This also simplifies the code by using the --quick-gen-key interface rather
than the experimental batch interface. It seems less likely that
--quick-gen-key will break than an experimental interface (whose
documentation I can no longer find).
--quick-gen-key is supported since gpg 2.1.0 (2014).
Sponsored-by: Graham Spencer on Patreon
Make git-annex get/copy/move --from foo override configuration of
remote.foo.annex-ignore, as documented.
This already worked for remotes supporting hasKeyCheap. For others though,
git-annex copy --from foo would silently not do anything, while
git-annex copy --to foo would use the annex-ignored remote.
Also improved the annex-ignore docs, to reflect that `git-annex get`
without --from will skip using annex-ignored remotes, for example.
Sponsored-by: Dartmouth College's DANDI project
Minor optimisation, but a win in every case, except for a couple where
it's a wash.
Note that replaceFile still takes a FilePath, because it needs to
operate on Chars to truncate unicode filenames properly.
Note that the use of s2w8 in genUUIDInNameSpace made it truncate unicode
characters. Luckily, genUUIDInNameSpace is only ever used on ASCII
strings as far as I can determine. In particular, git-remote-gcrypt's
gcrypt-id is an ASCII string.
Every remote that sets localpath also implements an availability that
reutrns Unavailable when a local directory is not available.
This makes external remotes, and others that get support for
availability Unavailable to be used by checkAvailable. (Which is only
used by the assistant.)
Had to keep localpath though, since other parts of the assistant use it
to eg, sync with a remote when a removable drive is plugged in.
Sponsored-by: Jack Hill on Patreon
This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
Fix behavior when importing a tree from a directory remote when the
directory does not exist. An empty tree was imported, rather than the
import failing. Merging that tree would delete every file in the
branch, if those files had been exported to the directory before.
The problem was that dirContentsRecursive returned [] when the directory
did not exist. Better for it to throw an exception. But in commit
74f0d67aa3 back in 2012, I made it never
theow exceptions, because exceptions throw inside unsafeInterleaveIO become
untrappable when the list is being traversed.
So, changed it to list the contents of the directory before entering
unsafeInterleaveIO. So exceptions are thrown for the directory. But still
not if it's unable to list the contents of a subdirectory. That's less of a
problem, because the subdirectory does exist (or if not, it got removed
after being listed, and it's ok to not include it in the list). A
subdirectory that has permissions that don't allow listing it will have its
contents omitted from the list still.
(Might be better to have it return a type that includes indications of
errors listing contents of subdirectories?)
The rest of the changes are making callers of dirContentsRecursive
use emptyWhenDoesNotExist when they relied on the behavior of it not
throwing an exception when the directory does not exist. Note that
it's possible some callers of dirContentsRecursive that used to ignore
permissions problems listing a directory will now start throwing exceptions
on them.
The fix to the directory special remote consisted of not making its
call in listImportableContentsM use emptyWhenDoesNotExist. So it will
throw an exception as desired.
Sponsored-by: Joshua Antonishen on Patreon
This causes changes to the original branch to get merged with a single
sync. Before, it took 2 syncs; the first happened to update the synced/
branch, and the second merged changes from the synced/ branch into the
ajusted branch.
Using mergeToAdjustedBranch when tomerge == origbranch is probably
overkill, but it does work fine.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
git add will fail if the file got deleted in the meantime. And since it was
queued, there was a window until the queue flushed where a deletion of the
file would cause a crash.
Instead, reuse Command.Add.addFile, which sha1 hashes the file itself
immediately, and then queues the index update. Ignore exceptions that will
happen if the file got deleted already.
Sponsored-by: k0ld on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
This is by no means complete, but escaping filenames in actionItemDesc does
cover most commands.
Note that for ActionItemBranchFilePath, the value is branch:file, and I
choose to only quote the file part (if necessary). I considered quoting the
whole thing. But, branch names cannot contain control characters, and while
they can contain unicode, git coes not quote unicode when displaying branch
names. So, it would be surprising for git-annex to quote unicode in a
branch name.
The find command is the most obvious command that still needs to be
dealt with. There are probably other places that filenames also get
displayed, eg embedded in error messages.
Some other commands use ActionItemOther with a filename, I think that
ActionItemOther should either be pre-sanitized, or should explicitly not
be used for filenames, so that needs more work.
When --json is used, unicode does not get escaped, but control
characters were already escaped in json.
(Key escaping may turn out to be needed, but I'm ignoring that for now.)
Sponsored-by: unqueued on Patreon
That is a legal url, but parseUrl parses it to "/c:/path"
which is not a valid path on Windows. So as a workaround, use
parseURIPortable everywhere, which removes the leading slash when
run on windows.
Note that if an url is parsed like this and then serialized back
to a string, it will be different from the input. Which could
potentially be a problem, but is probably not in practice.
An alternative way to do it would be to have an uriPathPortable
that fixes up the path after parsing. But it would be harder to
make sure that is used everywhere, since uriPath is also used
when constructing an URI.
It's also worth noting that System.FilePath.normalize "/c:/path"
yields "c:/path". The reason I didn't use it is that it also
may change "/" to "\" in the path and I wanted to keep the url
changes minimal. Also noticed that convertToWindowsNativeNamespace
handles "/c:/path" the same as "c:/path".
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Such an url is not valid; parseURI will fail on it. But git-annex doesn't
actually need to parse the url, because all it needs to do to support
syncing with it is know that it's not a local path, and use git pull and
push.
(Note that there is no good reason for the user to use such an url. An
absolute url is valid and I patched git-remote-gcrypt to support them
years ago. Still, users gonna do anything that tools allow, and
git-remote-gcrypt still supports them.)
Sponsored-by: Jack Hill on Patreon
This is built when building Setuo, and after
54ad1b4cfb, such modules cannot import
Utility.Directory, because it depends on unix, which is not in
setup-depends. This module only needs System.Directory, so import
Utility.SystemDirectory instead.
Sponsored-by: Dartmouth College's Datalad project
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
path to a bare repo when git config is not allowed to list the configs
due to the CVE-2022-24765 fix.
That resulted in a confusing error message, and prevented the nice
message that explains how to mark the repo as safe to use.
Made isBare a tristate so that the case where core.bare is not returned can
be handled.
The handling in updateLocation is to check if the directory
contains config and objects and if so assume it's bare.
Note that if that heuristic is somehow wrong, it would construct a repo
that thinks it's bare but is not. That could cause follow-on problems,
but since git-annex then checks checkRepoConfigInaccessible, and skips
using the repo anyway, a wrong guess should not be a problem.
Sponsored-by: Luke Shumaker on Patreon
init: Avoid scanning for annexed files, which can be lengthy in a
large repository. Instead that scan is done on demand. This lets git-annex
init be run and some query commands be used in a repository without
waiting.
Note that autoinit already behaved this way, so while this will mean some
commands like git-annex get/unlock/add will do the scan the first time run,
that is not really a significant behavior change.
And, it's really better to have a consistent behavior. The reason for
the inconsistency was a strange bug discussed in
b3c4579c79. Avoiding reconcileStaged in
init will keep avoiding whatever that was.
Sponsored-by: Dartmouth College's DANDI project
Clean the standalone environment before running the su command
to run "sh". Otherwise, PATH leaked through, causing it to run
git-annex.linux/bin/sh, but GIT_ANNEX_DIR was not set,
which caused that script to not work:
[2022-10-26 15:07:02.145466106] (Utility.Process) process [938146] call: pkexec ["sh","-c","cd '/home/joey/tmp/git-annex.linux/r' && '/home/joey/tmp/git-annex.linux/git-annex' 'enable-tor' '1000'"]
/home/joey/tmp/git-annex.linux/bin/sh: 4: exec: /exe/sh: not found
Changed programPath to not use GIT_ANNEX_PROGRAMPATH,
but instead run the scripts at the top of GIT_ANNEX_DIR.
That works both when the standalone environment is set up, and when it's
not.
Sponsored-by: Kevin Mueller on Patreon
The flush was only done Annex.run' to make sure that the queue was flushed
before git-annex exits. But, doing it there means that as soon as one
change gets queued, it gets flushed soon after, which contributes to
excessive writes to the database, slowing git-annex down.
(This does not yet speed git-annex up, but it is a stepping stone to
doing so.)
Database queues do not autoflush when garbage collected, so have to
be flushed explicitly. I don't think it's possible to make them
autoflush (except perhaps if git-annex sqitched to using ResourceT..).
The comment in Database.Keys.closeDb used to be accurate, since the
automatic flushing did mean that all writes reached the database even
when closeDb was not called. But now, closeDb or flushDb needs to be
called before stopping using an Annex state. So, removed that comment.
In Remote.Git, change to using quiesce everywhere that it used to use
stopCoProcesses. This means that uses on onLocal in there are just as
slow as before. I considered only calling closeDb on the local git remotes
when git-annex exits. But, the reason that Remote.Git calls stopCoProcesses
in each onLocal is so as not to leave git processes running that have files
open on the remote repo, when it's on removable media. So, it seemed to make
sense to also closeDb after each one, since sqlite may also keep files
open. Although that has not seemed to cause problems with removable
media so far. It was also just easier to quiesce in each onLocal than
once at the end. This does likely leave performance on the floor, so
could be revisited.
In Annex.Content.saveState, there was no reason to close the db,
flushing it is enough.
The rest of the changes are from auditing for Annex.new, and making
sure that quiesce is called, after any action that might possibly need
it.
After that audit, I'm pretty sure that the change to Annex.run' is
safe. The only concern might be that this does let more changes get
queued for write to the db, and if git-annex is interrupted, those will be
lost. But interrupting git-annex can obviously already prevent it from
writing the most recent change to the db, so it must recover from such
lost data... right?
Sponsored-by: Dartmouth College's Datalad project
This should not change the behavior of it, unless there are multiple top
directories, and then it should behave the same as if there was a single
top directory that was actually above the directory to be created.
Sponsored-by: Dartmouth College's Datalad project
On Windows, that does not support long paths
https://github.com/jacobstanley/unix-compat/issues/56
Instead, use System.Directory.renamePath, which does support long paths.
Sponsored-by: Dartmouth College's Datalad project
