This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
untested
This won't be super slow, but it does need to diff two likely large
trees, and since the git-annex branch rarely sits still, it will most
likely be run at the beginning of every import.
A possible speed improvement would be to only run this when the database
did not contain a ContentIdentifier. But that would only speed up
imports when there is no new version of a file on the special remote,
at most renames of existing files being imported.
A better speed improvement would be to record something in the git-annex
branch that indicates when an import has been run, and only do the diff
if the git-annex branch has record of a newer import than we've seen
before. Then, it would only run when there is in fact new
ContentIdentifier information available from a remote. Certianly doable,
but didn't want to complicate things yet.
For now, it's only allowed when exporttree=yes is also set.
That simplified the implementation, but could later be changed if
there's a remote that makes sense to be an import but not an export.
However, it may work just as well to make a remote be readonly to
prevent export to it while still allowing import.
This does not avoid all possible races, but it does avoid all likely
ones, and is demonstratably better than git's own handling of races
where files get modified at the same time as it's updating the working
tree.
The main thing this won't detect are not unlikely races where part
of a file gets changed while it's being copied and then the file is
restored to its original condition before the modification check.
No, it's more likely that the limitations of checking inode, size,
and mtime won't detect certian modifications, involving eg mmapped
files.
Made some api changes.
listImportableContents needs to provide the size
of the data, so the downloader can check disk free space.
retrieveExportWithContentIdentifier is passed the filepath to write to
Use temporary "CID" key during download of a ContentIdentifier from a
remote, so withTmp can be used and then move the content to the real key
once it's known.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
Does not yet have a way to update with new information from the
git-annex branch, which will be needed when multiple repos are importing
from the same remote.
Avoid performing repository fixups for submodules and git-worktrees
when there's a .noannex file that will prevent git-annex from being
used in the repository.
This change is ok as long as the .noannex file is really going to prevent
git-annex from being used. But, init --force could override the file.
Which would result in the repo being initialized without the fixups
having run.
To avoid that situation decided to change init, to not let --force be used
to override a .noannex file. Instead the user can just delete the file.
If the worktree file already exists, and is annexed and uses the same
key, avoid failing, nothing needs to be done.
Had to add lookupFileNotHidden to handle the case where an adjust --hide-missing
is in use, and the worktree file was hidden due to the object content
being missing. lookupFile would return the key of the hidden file,
but it makes sense that after fromkey succeeds, the worktree must
contain the file it was supposed to set up.
Need to create the directory after the lock is held, not before.
The other racing process would need to shut down at just the wrong time,
running cleanupOtherTmp.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
I am very doubtful that commit 613e747d91
was right about this doing anything, and I've verified that without it,
ctrl-c sends sigINT to child processes, and git-annex get does not
continue to the next item.
It seems likely that the real problem back then was something catching
the async exception.
Hard to see how installing a default signal handler could cause any
change from default behavior either.
One reason to want to get rid of this cruft now is that tasty has a
sigINT handler of its own, and this would override it.
(Tasty is not currently setting that handler up the way git-annex uses
it, due to a problem in tasty, but that will hopefully change.)
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
Adding that field broke the Read/Show serialization back-compat,
and also the Eq and Ord instances were not blinded to it, which broke
git annex fsck and probably more.
I think that the new approach used in formatKeyVariety will be nearly
as fast, but have not benchmarked it.
This reverts commit 4536c93bb2.
That broke Read/Show of a Key, and unfortunately Key is read in at least
one place; the GitAnnexDistribution data type.
It would be worth bringing this optimisation back, but it would need
either a custom Read/Show instance that preserves back-compat, or
wrapping Key in a data type that contains the serialization, or changing
how GitAnnexDistribution is serialized.
Also, the Eq instance would need to compare keys with and without a
cached seralization the same.
The builder produces a lazy ByteString, and L.toStrict has to copy it,
but needing to use the builder is no longer to common case; the
serialization will normally be cached already as a strict ByteString,
and this avoids keyFile' needing to use L.toStrict . serializeKey'
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
It means that every place a Key has any of its fields changed, the cache
has to be dropped. I've grepped and found them all. But, it would be
better to avoid that gotcha somehow..
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
A keyName could contain "/", though this is unlikely and certianly only
ever could happen with WORM keys.
The change to addunused to escape that is no problem at all.
The change to VariantFile to escape it means that different versions of
git-annex could resolve a merge conflict differently in this case, which
is unfortunate. There would be different .variant files used, so the two
resolutions would themselves merge together without additional
conflicts, but the user would have to clean up the extra .variant
files.
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
Not likely to be any speed gain here, but this completes porting every
log file over.
And, it let me get rid of code copied from ghc and modified, so
simplifying the licensing.
This preserves the workaround for the old bug that caused NoUUID items
to be stored in the log, prefixing log lines with " ". It's now handled
implicitly, by using takeWhile1 (/= ' ') to get the uuid.
There is a behavior change from the old parser, which split the value
into words and then recombined it. That meant that "foo bar" and "foo\tbar"
came out as "foo bar". That behavior was not documented, and seems
surprising; it meant that after a git-annex describe here "foo bar",
you wouldn't get that same string back out when git-annex displayed repo
descriptions.
Otoh, some other parsers relied on the old behavior, and the attoparsec
rewrites had to deal with the issue themselves...
For group.log, there are some edge cases around the user providing a
group name with a leading or trailing space. The old parser would ignore
such excess whitespace. The new parser does too, because the alternative
is to refuse to parse something like " group1 group2 " due to excess
whitespace, which would be even more confusing behavior.
The only git-annex branch log file that is not converted to attoparsec
and bytestring-builder now is transitions.log.
There should be some speed gains here, especially for chunk and remote
state logs, which are queried once per key.
Now only old-format uuid-based logs still need to be converted to attoparsec.
Mostly didn't push the ByteStrings down very deep, but all of these log
files are not written to frequently at all, so slight remaining
innefficiency doesn't matter.
In Logs.UUID, removed the fixBadUUID code that cleaned up after a bug in
git-annex versions 3.20111105-3.20111110. In the unlikely event that a repo was
last touched by that ancient git-annex version, the descriptions of remotes
would appear missing when used with this version of git-annex. That is such minor
breakage, and so unlikely to still be a problem for any repos, that it was not
worth forward-porting that code to ByteString.
Probably not any particular speedup in this, since most of these logs
are not written to often. Possibly chunk log writing is sped up, but
writes to chunk logs are interleaved with expensive data transfers to
remotes, so unlikely to be a noticiable speedup.
Most of the individual logs are not converted yet, only presense logs
have an efficient ByteString Builder implemented so far. The rest
convert to and from String.
This should make == comparison of UUIDs somewhat faster, and perhaps a
few other operations around maps of UUIDs etc.
FromUUID/ToUUID are used to convert String, which is still used for all
IO of UUIDs. Eventually the hope is those instances can be removed,
and all git-annex branch log files etc use ByteString throughout, for a
real speed improvement.
Note the use of fromRawFilePath / toRawFilePath -- while a UUID usually
contains only alphanumerics and so could be treated as ascii, it's
conceivable that some git-annex repository has been initialized using
a UUID that is not only not a canonical UUID, but contains high unicode
or invalid unicode. Using the filesystem encoding avoids any problems
with such a thing. However, a NUL in a UUID seems extremely unlikely,
so I didn't use encodeBS / decodeBS to avoid their extra overhead in
handling NULs.
The Read/Show instance for UUID luckily serializes the same way for
ByteString as it did for String.
downloadUrl uses meteredFile, which sets up one progress meter,
and Remote.Web also uses metered, so two progress meters are displayed for
the same download.
Reversion introduced with the http-conduit switch in
c34152777b -- I don't know why the extra
call to metered was added there.
When -J is not used, the extra progress meter didn't display,
but an extra blank line did get output, which is also fixed.
This commit was sponsored by John Pellman on Patreon.
init: When --version=5 is passed on a crippled filesystem, use a v5 direct
mode repo as requested, rather than upgrading to v7 adjusted unlocked.
Fixed test suite on crippled filesystems, making it request --version=5
to test direct mode.
This fixes a bug with the numcopies counting when using sync --content.
It did not always pass the local repo uuid to handleDropsFrom, and so the
numcopies counting was off by one, and unwanted local content would only be
dropped when there were numcopies+1 remote copies.
Also, support dropping local content that has reached an
exporttree remote that is not untrusted (currently only S3 remotes
with versioning).
* Fix bug upgrading from direct mode to v7: when files in the repository
were already committed as v7 unlocked files elsewhere, and the
content was present in the direct mode repository, the annexed files
got their full content checked into git.
* Fix bug that caused v7 unlocked files in a direct mode repository
to get locked when committing.
This commit was sponsored by Nick Piper on Patreon.
When a file was already unlocked, but the annex object was present, the
upgrade process populated the unlocked file, but neglected to update the
index.
This commit was sponsored by Jochen Bartl on Patreon.
* findref: Support file matching options: --include, --exclude,
--want-get, --want-drop, --largerthan, --smallerthan, --accessedwithin
* Commands supporting --branch now apply file matching options --include,
--exclude, --want-get, --want-drop to filenames from the branch.
Previously, combining --branch with those would fail to match anything.
* add, import, findref: Support --time-limit.
This commit was sponsored by Jake Vosloo on Patreon.
dropunused: When an unused object file has gotten modified, eg due to
annex.thin being set, don't silently skip it, but display a warning and let
--force drop it.
This commit was sponsored by Ethan Aubin.
* init: When a crippled filesystem causes an adjusted unlocked branch to
be used, set repo version to 7, which it neglected to do before.
* init: When on a crippled filesystem, and the git version is too old
to use an adjusted unlocked branch, fall back to using direct mode.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Seems that youtube-dl --get-filename on a playlist lists all the filenames
for the playlist, which can take quite some time. The code already only
took the first name, so --no-playlist can speed it up a lot.
This commit was sponsored by Brett Eisenberg on Patreon.
When an export conflict prevents accessing a special remote, be clearer
about what the problem is and how to resolve it.
This commit was sponsored by Trenton Cronholm on Patreon.
Fix hang when transferring the same objects to two different clients at the
same time. (Or when annex.pidlock is used, two different objects to the
same or different clients.)
Could also potentially occur if a client was downloading an object and
somehow lost connection but that git-annex-shell was still running and
holding the transfer lock.
This does not guarantee that, if `transfer` fails for some other reason,
a DATA response will be made.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Should be redundant, but test suite is ending up with
a lot of extra sqlite connections before unused keys database handles
get garbage collected.
While running the test suite, I often saw 2-4+ open fds to the same
repo's keys database. After this change, it seems to mostly have 1,
occasionally 2.
And that might explain some of the strange sqlite failures in the test suite.
Especially the failures of test_lock_v7_force, where the keys database
gets renamed to a new directory out from under sqlite.
Cache high-resolution mtimes for improved detection of modified files in v7
(and direct mode).
Including on Windows.
With back-compat support so old low-res mtimes won't break anything, and
so the new information also won't break old versions of git-annex.
This is safe, because while the annex object ends up executable,
there were already at least two other cases where it ended up executable:
1. git add an an executable file
2. chmod +x of a a non-executable worktree file that was hard linked to the
annex object
After copy/hard link, it always fixes up the permissions to match the mode
of the worktree file, so when an executable annex object gets hard linked
to a non-executable worktree file, its execute bit gets removed.
Commit b7c8bf5274 already *said* it would do
this; I suspect the line of code I've removed was included in that commit
accidentially.
Also improves annex.thin documentation.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
It's auto-upgraded to 5, so does not need to be listed there.
Let's keep supportedVersions for versions that git-annex will actually
use without autoupgrading or demanding an upgrade.
init: When in a crippled filesystem, initialize a v7 repository using an
adjusted unlocked branch, instead of a direct mode repository.
Direct mode is deprecated, so this makes sense to do already I hope.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
Usually, git won't run clean filter when a file is unmodified. But, when
git checkout runs git annex smudge --update, it populates the pointer
runs git update-index, which sees the file has changed and runs
git annex smudge --clean, which was checksumming the file unncessarily
as it re-ingested it.
With annex.thin set, this is the difference between git checkout of a
branch with a 1 gb file taking 30s and 0.1s.
This commit was sponsored by Brett Eisenberg on Patreon.
* init, upgrade: Install git post-checkout and post-merge hooks that run
git annex smudge --update.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* Note that git has no hooks run after git stash or git cherry-pick,
so the user will have to manually run git annex smudge --update
after such commands.
Nothing currently installs the hooks into v6 repos that already exist.
Something will need to be done about that, either move this behavior to v7,
or document that the user will need to manually fix up their v6 repos.
This commit was sponsored by Eric Drechsel on Patreon.
The smuge filter no longer provides git with annexed file content, to
avoid a git memory leak, and because that did not honor annex.thin.
git annex smudge --update has to be run after a checkout to update
unlocked files in the working tree with annexed file contents.
No hooks yet to run it.
This commit was sponsored by Nick Piper on Patreon.
It was trying to git annex adjust when in a direct mode repo, and that
of course fails. What I don't understand though, is how the test suite
managed to work before, when it was clearly checking the wrong thing.
Since the right way to fix it was obvious, I have not bisected.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
This completes initial support for --hide-missing, although the
assistant still needs to be updated and it perhaps needs to be sped up,
and maybe there needs to be a way for git-annex get to operate on
missing files. Opened some more todos for those things.
This commit was sponsored by Henrik Riomar.
This relies on git ls-files --with-tree, which I'm using in a way that
its man page does not document. Hm. I emailed the git list to try to get
the docs improved, but at least the git test suite does test the same
kind of use case I'm using here.
Performance impact when not in an adjusted branch is limited to some
additional MVar accesses, and a single git call to determine the name of
the current branch. So very minimal.
When in an adjusted branch, the performance impact is
in Annex.WorkTree.lookupFile, which starts doing an equal amount of work
for files that didn't exist as it already did for files that were
unlocked.
This commit was sponsored by Jochen Bartl on Patreon.
Both Command.Sync and Annex.Ingest had their own versions of this.
The one in Annex.Ingest used Git.Branch.currentUnsafe, but does not seem
to need it. That is only checking to see if it's in an adjusted unlocked
branch, and when in an adjusted branch, the branch does in fact exist,
so the added check that Git.Branch.current does is fine.
This commit was sponsored by Denis Dzyubenko on Patreon.
* At long last there's a way to hide annexed files whose content
is missing from the working tree: git-annex adjust --hide-missing
* When already in an adjusted branch, running git-annex adjust
again will update the branch as needed. This is mostly
useful with --hide-missing to hide/unhide files after their content
has been dropped or received.
Still needs integration with sync and the assistant, and not as fast as it
could be, but already usable.
This commit was sponsored by Ethan Aubin.
Combinations like --hide-misssing --unlocked seem very useful. On the
other hand, combining --fix with --unlock doesn't make sense because a
file can be either unlocked or a symlink that can be fixed, but not
both.
Changed the serialization of HideMissingAdjustment in passing, but it
has not actually been used yet so nothing will be broken.
This commit was sponsored by Trenton Cronholm on Patreon.
That could cause git-annex to get confused about whether a locked file's
content was present, when the object file got touched.
Unfortunately this means more work sometimes when annex.thin is set,
since it has to checksum the file to tell if it's still got the right
content.
Had to suppress output when inAnnex calls isUnmodified, otherwise
"(checksum...)" would be printed in places it ought not to be,
eg "git annex get" could turn out not need to get anything, and
so only display that.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
Inverted logic added as part of the url security fix made it always use
curl when annex.security.allowed-http-addresses=all unless annex.web-options
was set.
That nobody noticed kind of makes me wonder if anyone uses
annex.web-options..
This commit was sponsored by Denis Dzyubenko on Patreon.
* init: Improve generated post-receive hook, so it won't fail when
run on a system whose git-annex is too old to support git-annex post-receive
* init: Update the post-receive hook when re-run in an existing repository.
This commit was sponsored by Jack Hill on Patreon.
v6: Fix annex object file permissions when git-annex add is run on a
modified unlocked file, and in some related cases.
If a hard link is made, don't freeze it; annex.thin
uses writable object files.
Also: For some reason, linkToAnnex used to thawContent src. I can see no
reason why it needed to do that, so I eliminated that.
This commit was sponsored by Brock Spratlen on Patreon.
Make git-annex sync and the assistant skip trying to drop from appendonly
remotes since it's just going to fail.
git-annex drop and similar commands will still try to drop from
appendonly, so the user will see failure messages when they try to do
that. To do otherwise would be confusing since the user has explicitly
asked for a drop with those commands.
This commit was supported by the NSF-funded DataLad project.
Probably not noticed until now because the queue is large enough that two
threads each filling theirs at the same time and flushing is unlikely to
happen.
Also made explicit that each worker thread gets its own queue.
I think that was the case before, but if something was put in the queue
before worker threads were forked off, they could have each inherited the
same queue.
Could have gone with a single shared queue, but per-worker queues is more
efficient, because a worker can add lots of stuff to its own queue without
any locking.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Avoids annex.largefiles inconsitency and also avoids a lot of
unneccessary calls to the clean filter when a large repo's clone
is being initialized.
This commit was supported by the NSF-funded DataLad project.
v6: When annex.largefiles is not configured for a file, running git add or
git commit, or otherwise using git to stage a file will add it to the annex
if the file was in the annex before, and to git otherwise. This is to avoid
accidental conversion.
Note that git-annex add's behavior has not changed, for reasons explained
in the added comment.
Performance: No added overhead when annex.largefiles is configured.
When not configured, there is an added call to catObjectMetaData,
which involves a round trip through git cat-file --batch.
However, the earlier catKeyFile primes the cache for it.
This commit was supported by the NSF-funded DataLad project.
If a pointer file is being populated and something modifies it at the
same time, there was a race there the modified file's InodeCache
could get added into the keys database.
Note that replaceFile normally renames the temp file into place, so the
inode cache caculated for the temp file will still be good. If it has to
fall back to a copy, the worktree file won't be put in the inode cache.
This has the same result as if the worktree file gets touched, and will
be handled the same way. Eg, when dropping, isUnmodified will do an
expensive comparison and notice that the worktree file does have the
same content, and so drop it.
This commit was supported by the NSF-funded DataLad project.
This would be better if getInternalFiles were
more polymorphic, but I can't see a good
way to accomplish that without messing with Data.Typeable,
which seemed like overkill.
Reverted CommandAction back to the simpler version.
This commit was sponsored by Eric Drechsel on Patreon.
Test suite found a case where this is necessary.
And the man page says this, although current behavior is not as
documented..
Note that files beginning with . are discarded.
This includes ./file and dir/./file. If you don’t want
this, then use cleaner names.
This may hit path length limits on Windows. shrug
This commit was supported by the NSF-funded DataLad project.
Check just before running update-index if the worktree file's content is
still the same, don't update it when it's been modified. This narrows
the race window a lot, from possibly minutes or hours, to seconds or
less.
(Use replaceFile so that the worktree update happens atomically,
allowing the InodeCache of the new worktree file to itself be gathered
w/o any other race.)
This doesn't eliminate the race; it can still occur in the window before
update-index runs. When annex.queue is large, a lot of files will be
statted by the checks, and so the window may still be large enough to be a
problem.
When only a few files are being processed, the window is as small as it
is in the race where a modification gets overwritten by git-annex when
it updates the worktree. Or maybe as small as whatever race git
checkout/pull/merge may have when the worktree gets modified during it.
Still, I've kept a todo about this race.
This commit was supported by the NSF-funded DataLad project.
Use git update-index --refresh, since it's a little bit more
efficient and the user can be told to run it if a locked index prevents
git-annex from running it.
This also fixes the problem where an annexed file was deleted in the index
and a get of another file that uses the same key caused the index update to
add back the deleted file. update-index will not add back the deleted file.
Documented in tips/unlocked_files.mdwn the gotcha that the index update
may conflict with other operations. I can't see any way to possibly avoid
that conflict.
One new todo about a race that causes a modification to be accidentially
staged.
Note that the assistant only flushes the git command queue when it
commits a modification. I have not tested the assistant with v6 unlocked
files, but assume most users of the assistant won't care if the index
shows a file as modified for a while.
This commit was supported by the NSF-funded DataLad project.
After updating the worktree for an add/drop, update git's index, so git
status will not show the files as modified.
What actually happens is that the index update removes the inode
information from the index. The next git status (or similar) run
then has to do some work. It runs the clean filter.
So, this depends on the clean filter being reasonably fast and on git
not leaking memory when running it. Both problems were fixed in
a96972015d, but only for git 2.5. Anyone
using an older git will see very expensive git status after an add/drop.
This uses the same git update-index queue as other parts of git-annex, so
the actual index update is fairly efficient. Of course, updating the index
does still have some overhead. The annex.queuesize config will control how
often the index gets updated when working on a lot of files.
This is an imperfect workaround... Added several todos about new
problems this workaround causes. Still, this seems a lot better than the
old behavior.
This commit was supported by the NSF-funded DataLad project.
Added getStaged, to get the versions of git-annex branch files staged in its
index, and use during transitions so the result of merging sibling branches
is used.
The catFileStop in performTransitionsLocked is absolutely necessary,
without that the bug still occurred, because git cat-file was already
running and was looking at the old index file.
Note that getLocal still has cat-file look at the git-annex branch, not the
index. It might be faster if it looked at the index, but probably only
marginally so, and I've not benchmarked it to see if it's faster at all. I
didn't want to change unrelated behavior as part of this bug fix. And as
the need for catFileStop shows, using the index file has added
complications.
Anyway, it still seems fine for getLocal to look at the git-annex branch,
because normally the index file is updated just before the git-annex branch
is committed, and so they'll contain the same information. It's only during
a transition that the two diverge.
This commit was sponsored by Paul Walmsley in honor of Mark Phillips.
It was sorting by uuid, rather than cost!
Avoid future bugs of this kind by changing the Ord to primarily compare
by cost, with uuid only used when the cost is the same.
This commit was supported by the NSF-funded DataLad project.
Added annex.commitmessage config that can specify a commit message for the
git-annex branch instead of the usual "update".
This commit was supported by the NSF-funded DataLad project.
Support working trees set up by git-worktree, by setting up some symlinks
such that git-annex links work right.
Also improved support for repositories created with --separate-git-dir.
At least recent git makes a .git file for those (older may have used a
symlink?), so that also needs to be converted to a symlink.
This commit was sponsored by Nick Piper on Patreon.
addurl: When security configuration prevents downloads with youtube-dl,
still check if the url is one that it supports, and fail downloading it,
instead of downloading the raw web page.
No point in keeping an empty tmp workdir around.
The associated tmp object file is retained even if empty, didn't want to
deal with any possible races with something else downloading to that
file at the same time this would check if it's empty. Anyhow, temp
object files are normally retained, and this will get cleaned out the
same way those do, by dropunused.
Leveraged the existing verification code by making it also check the
retrievalSecurityPolicy.
Also, prevented getViaTmp from running the download action at all when the
retrievalSecurityPolicy is going to prevent verifying and so storing it.
Added annex.security.allow-unverified-downloads. A per-remote version
would be nice to have too, but would need more plumbing, so KISS.
(Bill the Cat reference not too over the top I hope. The point is to
make this something the user reads the documentation for before using.)
A few calls to verifyKeyContent and getViaTmp, that don't
involve downloads from remotes, have RetrievalAllKeysSecure hard-coded.
It was also hard-coded for P2P.Annex and Command.RecvKey,
to match the values of the corresponding remotes.
A few things use retrieveKeyFile/retrieveKeyFileCheap without going
through getViaTmp.
* Command.Fsck when downloading content from a remote to verify it.
That content does not get into the annex, so this is ok.
* Command.AddUrl when using a remote to download an url; this is new
content being added, so this is ok.
This commit was sponsored by Fernando Jimenez on Patreon.
