And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
The problem with combining these is that Build.Standalone etc need only
the BuildInfo, and since not built with cabal, the BuildFlags ifdefs
were causing bogus warnings.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
addurl: When the file youtube-dl will download is already an annexed file,
don't download it again and fail to overwrite it, instead just do nothing,
like it used to when quvi was used.
This commit was sponsored by Anthony DeRobertis on Patreon.
Chose to make this only handle files actively being downloaded, not temp
files for downloads that were interrupted or files that have been fully
downloaded.
This commit was sponsored by Ole-Morten Duesund on Patreon.
This avoids warnings from stack about the module not being listed in the
cabal file. So, the generated file is also renamed to Build/SysConfig.
Note that the setup program seems to be cached despite these changes; I
had to cabal clean to get cabal to update it so that Build/SysConfig was
written.
This commit was sponsored by Jochen Bartl on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
The youtube changes accidentially caused the OtherDownloader url to not
get used here, which broke datalad's test suite luckily.
This commit was supported by the NSF-funded DataLad project.
lookupkey: Support being given an absolute filename to a file within the
current git repository.
This commit was supported by the NSF-funded DataLad project.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Fully working, including --fast/--relaxed.
Note that, while git-annex addurl --relaxed is not going to check
youtube-dl, I kept git annex importfeed --relaxed checking it.
Thinking is that, let's not break people's importfeed cron jobs, and
importfeed does not typically have to check a large number of new items,
so it's ok if it's a little bit slower when used with youtube playlist
feeds.
importfeed's behavior is also improved (?) when a feed has links in it
to non-media files. Before, those were skipped. Now, the content of the
link is downloaded. This had to be done, because trying to use
youtube-dl is slow, and if those were skipped, it would have to check
every time importfeed was run. While this behavior change may not be
desirable for some feeds, that intersperse links to web pages with
enclosures, it will be desirable for other feeds, that have
non-enclosure directy links to media files.
Remove old quvi modules.
This commit was sponsored by Øyvind Andersen Holm.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
Needed to run youtube-dl in, but could also be useful for other stuff.
The tricky part of this was making the workdir be cleaned up whenever the
tmp object file is cleaned up.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Clean up some uses of showStart with "" for the file,
or in some cases, a non-filename description string. That would
generate bad json, although none of the commands doing that
supported --json.
Using "" for the file resulted in output like "foo rest";
now the extra space is eliminated.
This commit was sponsored by Fernando Jimenez on Patreon.
As long as the class of remotes supports exporting, it's tested whether
or not the remote is configured with exporttree=yes.
Also, made testremote of a remote configured with exporttree=yes
disable that configuration for testing non-export storage.
This commit was supported by the NSF-funded DataLad project.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
After a false start, I found a fairly non-intrusive way to deal with it.
Although it only handles transfers -- there may be issues with eg
concurrent dropping of the same key, or other operations.
There is no added overhead when -J is not used, other than an added
inAnnex check. When -J is used, it has to maintain and check a small
Set, which should be negligible overhead.
It could output some message saying that the transfer is being done by
another thread. Or it could even display the same progress info for both
files that are being downloaded since they have the same content. But I
opted to keep it simple, since this is rather an edge case, so it just
doesn't say anything about the transfer of the file until the other
thread finishes.
Since the deferred transfer action still runs, actions that do more than
transfer content will still get a chance to do their other work. (An
example of something that needs to do such other work is P2P.Annex,
where the download always needs to receive the content from the peer.)
And, if the first thread fails to complete a transfer, the second thread
can resume it.
But, this unfortunately means that there's a risk of redundant work
being done to transfer a key that just got transferred.
That's not ideal, but should never cause breakage; the same
thing can occur when running two separate git-annex processes.
The get/move/copy/mirror --from commands had extra inAnnex checks added,
inside the download actions. Without those checks, the first thread
downloaded the content, and then the second thread woke up and
downloaded the same content redundantly.
move/copy/mirror --to is left doing redundant uploads for now. It
would need a second checkPresent of the remote inside the upload
to avoid them, which would be expensive. A better way to avoid
redundant work needs to be found..
This commit was supported by the NSF-funded DataLad project.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Also deletes any tagged pushes that the assistant might have done,
since those would also prevent resetting a branch back.
This commit was sponsored by andrea rota.
Motivation is to remove all metadata when it gets copied from a previous
version of the file, and that is not deisrable.
This commit was supported by the NSF-funded DataLad project.
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
Same as is done for all other transfers of content, so the webapp will
display progress bars etc.
This commit was sponsored by Anthony DeRobertis on Patreon.
Now when one repository has exported a tree, another repository can get
files from the export, after syncing.
There's a bug: While the database update works, somehow the database on
disk does not get updated, and so the database update is run the next
time, etc. Wasn't able to figure out why yet.
This commit was sponsored by Ole-Morten Duesund on Patreon.
New table needed to look up what filenames are used in the currently
exported tree, for reasons explained in export.mdwn.
Also, added smart constructors for ExportLocation and ExportDirectory to
make sure they contain filepaths with the right direction slashes.
And some code refactoring.
This commit was sponsored by Francois Marier on Patreon.
The subtle part of this is what happens when the remote fails to remove
an empty directory. The removal from the export needs to fail in that
case, so the removal will be tried again later. However, removeExportLocation
has already been run and changed the export db, so if the next run
checks getExportLocation, it might decide nothing remains to be done,
leaving the empty directory.
Dealt with that by making removeEmptyDirectories, handle a failure
by calling addExportLocation, reverting the database changes so the next
run will be guaranteed to try deleting the empty directory again.
This commit was sponsored by Thomas Hochstein on Patreon.
