This is required by some software, e.g. bluez/gnome to set some ACLs on
/dev/rfkill (see #904). While probably nobody will notice on the
downstream kernels (as we don't have any proper software there anyways)
it's definitely needed on mainline-ish kernels. Surprisingly only one
kernel has broken by enabling this option (linux-sony-tulip) which I've
patched up.
linux-postmarketos-qcom-sdm660 did not break by enabling this option,
but required linux4.17-gcc10-extern_YYLOC_global_declaration.patch to
build again, so this was fixed too.
[ci:skip-build] [ci:ignore-count]
According to Purism, the imx8mq-librem5.dtb alias is going away soon,
and we should be using the -r2 dtb. The -r2 dtb (which represents
Birch/Chestnut L5 variants) is most compatible, it'll boot on later
variants. dtbs for later L5 devices won't work on older devices.
This is a generic package for devices which use x86_64 CPU and 32-bit
EFI. Most distributions don't provide installation for 32-bit EFI, so
installation is not user-friendly.
Actually, these tablets deserve device-specific packages (I am going to
make ones for ASUS VivoTab Note 8 and ASUS Transformer Book T100TA), but
this one includes basic functions and can be booted on any 32-bit EFI
tablet with disabled secure boot and missing device-specific package.
I guess 32-bit EFI with 64-bit CPU is Intel's "feature" and AMD doesn't
have such stuff, so this package will be installed only on devices with
Intel CPU, unlike device-tablet-x64uefi which can be installed on any
x86_64 PC. So i decided to enable some Intel specific things (userspace
GPU stuff and alsa-ucm-conf).
I used for reference device-tablet-x64uefi and
device-trekstor-surftabduow1 packages. This package also can be used as
a reference for device-specific ones.
Added support for Motorola Moto E 2014 codename: condor
It is booting, has usb, battery, flashing needs special fastboot command for the boot partition
- Upgrade librem5-base to v33
- Include the haptic vibration driver in initfs for supporting osk-sdl's
haptic feedback feature
- remove gps udev rule in pmaports in favor of using rule from
librem5-base
- install modem audio udev rule from librem5-base
- add openrc service for putting device into 'ship mode' on shutdown
(prevents battery from slowly draining)
- include Evergreen/r4 dtb in /boot
- Fix audio with port of ucm config to ucm2 (patch submitted upstream
here: https://source.puri.sm/Librem5/librem5-base/-/merge_requests/214)
Port based on an unofficial LineageOS port
from https://www.los-legacy.de/17.1/zerofltexx, using kernel from https://github.com/Exynos7420/android_kernel_samsung_exynos7420/
What works:
- Kernel boots
- Display and touch input (tested with Weston)
- USB networking
Note: I removed camera support in kernel config for now, as there were related kernel crashes.
Wifi doesn't work either yet because the firmware dependencies/paths need to be fixed first.
The modprobe.conf is not necessary on those devices because they already
load the panel module using deviceinfo_modules_initfs. Let's skip the
modprobe.conf in that case so we don't need to add all panels in two places.
A hack shamelessly stolen from Manjaro. Plasma Mobile runs in the user
session and needs direct access to the sys entries of the flashlight to
be able to toggle it in the GUI
[skip ci] Broken, thinks there is an unreferenced file while there is
not
Move the shelli-specific alsa config from MR 1741 into a subpackage that
only gets installed together with shelli.
With the config installed, programs using alsa instead of pulseaudio,
can't be controlled through the volume setting in Phosh anymore (and
probably other UIs too). Shelli doesn't use pulseaudio.
Change the path of the config file like in MR 1877, so it's easier to
override it if necessary.
While at it, improve the APKBUILD slightly by fixing the install_if of
the phosh subpkg (should depend on =$pkgver-r$pkgrel, see APKBUILD
reference), and fix long lines.
Simply disabling FIMC IS does not work however due to compilation
errors and a null pointer dereference. 01-fix-FIMC-IS-disabling.patch
takes care of this.
As with other exynos devices some additional things had to be disabled
to make the kernel compile after FIMC IS had been disabled,
specifically:
CONFIG_CAMERA_EEPROM
CONFIG_VIDEO_EXYNOS_MIPI_CSIS
CONFIG_LEDS_MAX77803
Apart from that we also have:
02-netfilter-symbols.patch, which fixes another compilation error.
03-usb_gadget-set-random-rndis-host-MAC-address-to-prev.patch (taken
from another device) which prevents host mac address being set to
00:00:00:00:00.
Kernel sources have been changed to the lineage-16.0 branch in the
exynos5420 repo, as that is where development happens at the moment.
based off from lineage os, manages to boot including ssh over usb.
had to disable:
CONFIG_HTC_RADIO_SMEM
CONFIG_HTC_MODEM_NOTIFIER
CONFIG_MSM_SMP2P
CONFIG_UIO_MSM_SHAREDMEM
[ci:skip-build]: already built successfully in CI
This adds eg25-manager for managing modem power in userspace instead of
relying on the modem-power stuff in the kernel. The userspace
eg25-manager has proven to be more reliable than using modem-power.
An older setup-modem script is installed for ofono, since eg25-manager
cannot interface with ofono (yet).
The eg25 init script was removed since it only dealt with configuring
the modem-power driver in the kernel
[ci:skip-build]: already built successfully in CI
Instead of running the entire setup_usb_network_configfs function we
run the parts that are actually necessary for
setup_usb_network_android to succeed when it is run afterwards.
USB networking, Touchscreen and display are working.
CONFIG_SND_SOC_QDSP6V2 is omitted from kernel config for now as the resulting driver fails to build.
Upstream changelog:
868f3eb852
Suspend is also disabled in the kconfig, since it is not
supported/working on this device
[ci:skip-build]: already built successfully in CI
Changes:
- Depends on soc-sprd-audio-sc8830 package for audio support
- Includes fixes for X11 and color mode
- Switches to dtbtool-sprd
[ci:skip-build] Already built fine on CI in a MR
SEC_RESTRICT_ROOTING is a Samsung-specific option,
which makes unable to get root permissions
on the device.
Needed for postmarketos/pmbootstrap!2000 to be merged.
[ci:skip-build] Builds fine locally
After pulseaudio 14.0 was released, audio on the pinephone was broken.
This applies the relevant config from here to fix it:
c23f92aa46
[ci:skip-build]: already built successfully in CI
Device: Asus Zenfone Max ZC550KL
MSM8916
Mainline Kernel
Works:
- Boots
- external sdcard
- Wifi/bt
- Display
- Touchscreen
I'm still working on this device. You can expect more things to work in
the future.
New upstream ALSA/PulseAudio release, new UCM regressions - of course!
Introduce some new hacks to make the ALSA UCM configurations work again.
This fixes weird "Combination of Speaker,Primary Microphone" outputs
appearing in the PulseAudio mixer.
And while we're at it, some minor improvements/additions:
- Default to Speaker/PrimaryMic instead of Headphones/Headset
I believe this is just a workaround until headphones detection
works properly.
- Add UCM configurations for oppo-a51f and lenovo-a6010
* Mainline kernel: enable installation of Wi-Fi firmware.
Now that we have Wi-Fi support in mainline kernel, use it.
* Mainline kernel: adjust description of mainline kernel
subpackage; we still cannot recommend it over downstream,
but it is not so experimental anymore.
* Downstream kernel: add workaround for broken SSH:
use dropbear instead of openssh server. See #808https://gitlab.com/postmarketOS/pmaports/-/issues/808
Hello there, DragonX256 here.
For now, this tablet only have flashing, USB net, display and touchscreen.
I will try to add other features soon, or, if I fail enough, switch to mainlining immediately :D
Fall back to gcc6, because wlan module compiled with gcc10 fails to
initialize with `module wlan: overflow in relocation type 261 val ffffffbffc000000`
error.
Explicitly add gcc-aarch64 in makedepends, because of gcc6 present, seems
like gcc dependencies not resolved correctly
[ci:skip-build]: already built successfully in CI
The existing device package and its dependencies are for i9305, but
renaming them to i9300 makes more sense, as the i9300 is the base
version (SIII) and the i9305 (SIII LTE) is the improved version.
Since the installer leaves the partition in a state where the initramfs
needs to resize it. But without the force parameter the postmarketOS
initramfs won't touch the partitions
Mostly the GCC10 yylloc failure was seen but several others have been
observed:
* wireguard script was silently failing
* several gcc10 x86 errors
* a checksum from kernel.org has changed
Now we have 3 different gcc10 yylloc patches:
gcc10-extern_YYLOC_global_declaration.patch:
Linux < 4.2
linux4.2-gcc10-extern_YYLOC_global_declaration.patch:
Linux 4.2+
linux4.17-gcc10-extern_YYLOC_global_declaration.patch:
Linux 4.17+
[ci:skip-build]
[ci:ignore-count]
[ci:skip-vercheck]
With these kernel sources the device boots successfully,
sometimes. Usually, kernel panics and device reboots a couple of
times, but after a few attempts (maybe 1, maybe 7) it succeeds to
boot. The problems seem to be related to FIMC IS, unfortunately it
does not seem to be possible to just disable it in the kernel config,
as that leads to compilation errors.
I have so far just experimented with getting wifi up and running, but
it does not work out of the box even after adding firmware package
with files from TheMuppets, wpa_supplicant fails to connect and dmesg
is filed with lines like:
```
[ 112.509235] [L0: wl_event_handle: 3109] CFG80211-INFO2) wl_escan_handler : Couldn't find P2PIE in probe response/beacon
```
[ci:skip-build]: already built successfully in CI
Upstream keeps making breaking changes in patch releases.
Let's fork alsa-ucm-conf entirely for now instead of just patching
in some files to ensure that these files don't break every few months.
This fixes audio on MSM8916 devices when not using the modem.
This subpackage was removed when a proper fix for suspend was merged,
however apk doesn't know to purge this subpackage, so the old elogind
hook workaround stuck around. This workaround could probably be removed
once we're sure all folks on edge have installed this upgraded package
with the 'provides'...
- re-enable console suspend, which seems to be broken with elogind when
suspending (kernel gets hung up indefinitely in vt_waitactive)
- add a suspend hook to work around the musb driver not allowing the
device to suspend
Based on my testing, this option seems to prevent suspending via
elogind (using `loginctl suspend`). When console suspend is disabled,
the kernel gets hung up in the call to vt_waitactive, and elogind times
out trying to suspend.
qrtr-ns is now part of the Linux kernel (as of version 5.9), so
there is no need to start it in userspace anymore. It does not seem
to be needed (or working) on downstream either.
linux-postmarketos-qcom-msm8996 is the only mainline kernel which
is still on < 5.9. In preparation to make the qrtr dependency optional
for rmtfs, let's explicitly enable qrtr-ns for MSM8996 devices to avoid
causing regressions.
Update to kernel 5.9 with the following changes:
* Change tri-state key to macro keys instead of 'A', 'B' and 'C' keys.
[ci:skip-build]: already built successfully in CI
Initial support for Sony Xperia XA (codename: sony-tuba). Builds, can be
flashed, ssh connection through usb works, display works, touchscreen works,
no wifi or anything else.
According to the wiki pages, some interfaces can't be built for the
armhf architecture. This device is configured to armhf but it actually
supports armv7 architecture. Tested with a samsung-i9300.
This new version:
- Upgrades device config from upstream to v25
- Fixes a problem using modesetting driver on Xorg (lightdm
was broken because it now uses Xorg)
- Override GDK to use GLES (change from upstream Purism)
Replace the old downstream port with a new aarch64 port running the
linux-postmarketos-qcom-msm8916 close-to-mainline(TM) kernel.
Most of the functionality is working:
- USB Network
- Storage (eMMC, SD card)
- Display, brightness control
- Touchscreen, buttons
- IMU (accelerometer+gyroscope)
- Notification LED
- Sound (Speaker, Headphones, Microphones)
- WiFi, Bluetooth
- Modem (SMS, voice calls, mobile data)
Coming soon (hopefully): Battery/Charging, USB-OTG (not working yet)
There are many variants of the device, so more changes to handle
differences between them may be needed in the future. For now,
the only relevant difference is the required modem firmware:
- wt88047 (global variant)
- wt86047 (China variant)
... have different kind of modems and they do not seem to work with
the firmware of the other one. The way this is handled in this device
package is that there is a separate kernel variant for both of them.
All other required firmware can be shared, and therefore there is no
differentiation needed when using the kernel variant without modem.
I renamed "wingtech-wt88047" to "xiaomi-wt88047".
My reasoning for that is the following:
- Wingtech is the ODM (original design manufacturer), they designed the
hardware and (probably) manufactured it. But postmarketOS port applies
to the combination of both hardware and firmware, and the firmware was
at least partially provided by Xiaomi.
- wt88047 looks lonely with the "wingtech" vendor, when all other Xiaomi
devices use "xiaomi", even though many from them were probably also
designed by Wingtech.
- We don't use the ODM hardware name for other devices either, e.g.
"wileyfox-crackling" would be "longcheer-l8150" with the same approach.
I think the port is better visible as "xiaomi-wt88047" (too bad Xiaomi
seemingly did not have a proper codename for this device...)
In preparation for adding mainline device port for Xiaomi Redmi 2
(wt88047), remove the downstream device port. It's still armhf
which makes it clear that it hasn't been tested for a long time.
The mainline port has many more features, also it is aarch64, which
is not compatible with the downstream kernel.
Actually the display has been working in initramfs since MR 1261
(device-bq-paella: enable display and touchscreen on boot).
We should make it explicit in deviceinfo.
device-motorola-ocean: Add support for both downstream and mainline
kernel
device-motorola-ocean: Update dependency for downstream kernel
The dependency mentioned is wcnss-wlan.
Apply 1 suggestion(s) to 1 file(s)
Device package changes:
- Replace ALSA configs with dependency (soc-sprd-audio-sc8830)
- Add reboot-mode as dependency
Kernel package changes:
- Use dtbtool-sprd instead of dtbtool
- Move code and device tree to external repo
- Add patch for GCC10
- Add patches for framebuffer
This Patch is needed, because in the kernel the audio from the cpu to the headset gets turned around. We need to turn this around again.
Please revert this if there is a fixed kernel.
This adds a Finnish/Swedish key map for the Nokia n900.
The same keymap is used for Finnish and Swedish.
This makes the keyboard work in the console. To fix the
XkbLayout other changes are needed to pmbootstrap.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- E1565 is original "grouper" and it's for modern devices similar to
tilapia
- PM269 is earlier produced Nexuses with different PMIC (not very often
seen)
Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
