Stock Android on PineTab is detected as 1f3a:1007.
Use those values as USB idVendor and idProduct on
postmarketOS, too.
idVendor 1f3a is "Allwinner Technology Co., Ltd."
idProduct 1007 is unknown to databases.
It's unmaintained both on our side and upstream. Nobody stepped up to
maintain it (https://gitlab.com/postmarketOS/pmaports/issues/372), so
let's drop it before it introduces security issues and compilation
problems.
ConfigFS USB attrs are customizable based on the `deviceinfo_usb_*` variables,
however some downstream kernels (e.g: msm-3.18) doesn't use configfs, instead
uses the traditional Android USB Gadget.
Based on `deviceinfo_usb_{idVendor/idProduct}` variables, we can change the USB
vendor and product.
So that on these devices, we can make it appear on USB bus as the correct USB
vendor/product ID, not "Google Inc. Nexus 4 (fastboot)"
Signed-off-by: Danct12 <danct12@disroot.org>
At the moment, a full file system check is forced even if the
file system is marked clean (i.e. it was properly unmounted the
last time it was used). On large file systems with slow I/O
(e.g. SD cards), this can take a significant amount of time.
Removing the -f option of e2fsck allows skipping the full
file system check if it is marked clean, speeding up the boot time.
Some devices' downstream kernels may have different RNDIS/functionfs
drivers (ex. QCRNDIS) that require different values for some
configfs gadget attributes. Make it possible to customize with
deviceinfo file from device- package.
The idea is that each device- package can optionally specify a
bunch of `deviceinfo_usb_*` variables to customize the way it is
visible on USB bus. The ability to override
`deviceinfo_usb_rndis_function` is essential to make downstream
sdm660 based device to appear on USB bus.
While at it, make `idVendor`, `idProduct` and `serialnumber` also
customizable. So that we can make, for example, PineTab appear on
USB bus as PineTab, not as "Google Inc. Nexus 4 (fastboot)".
* Only run the wiki test, if anything matching device/device-* was
modified.
* Split testcase linting (flake8) from shellcheck and only run flake8 if
.gitlab-ci/* was modified.
* Rename .gitlab-ci/static_code_analysis.sh to .gitlab-ci/shellcheck.sh
and make it scan all pre/post install/upgrade/deinstall scripts.
[ci:skip-vercheck]: other commits in this merge request have several
intended version downgrades, such as 3 -> 1.0.0
device/device-asus-me176c:
- Install me176c-factory to apply correct MAC addresses for
WiFi and BT
- Use FAT32 for boot partition. This allows flashing the boot
partition directly as ESP (EFI System Partition).
- Overall cleanup
device/linux-asus-me176c:
- Update kernel fork to 4.19.80
- Cleanup APKBUILD
- Stop building patched ACPI DSDT table directly into kernel
firmware/firmware-asus-me176c:
- Package WiFi firmware
firmware/firmware-asus-me176c-acpi:
- New package for the patched ACPI DSDT table
-> Separate from firmware-asus-me176c because it is always required,
(not optional)
[ci:skip-build]: runs into timeout
Without this, the device will simply run the broken ACPI DSDT table, so
we might as well update it. If we had put it into a subpackage, it
would not be possible to use the fixed DSDT without any other firmware
packages.