Commit graph

1715 commits

Author SHA1 Message Date
Ultracoolguy
65535ab302
firmware-motorola-ocean: add modem and adsp firmware (MR 2256) 2021-06-20 19:04:27 +03:00
Clayton Craft
0582513c46
purism-librem5: disable PM for the broadmobi modem (MR 2259)
Workaround for https://source.puri.sm/Librem5/linux-next/-/issues/303.

It seems worth sacrificing some power savings for a modem that won't
disappear, at least until the above issue is fixed.

[ci:skip-build]: already built successfully in CI
2021-06-19 16:39:37 +02:00
Julian Braha
8479d2376f
lg-us996: new device (MR 2253)
[ci:skip-build]: already built successfully in CI
2021-06-19 14:24:18 +02:00
Max Buchholz
595f3dcb9c
nokia-sand: change device name to real codename (MR 2258)
This device was called nokia-rm846 before.

[ci:skip-vercheck]

[ci:skip-build] package rename, nothing changed
2021-06-17 18:16:54 -07:00
Clayton Craft
cfc8f7b12c
linux-asus-me176c: add kconfig check for nftables (MR 2060) 2021-06-14 14:04:37 -07:00
Clayton Craft
686136696c
linux-purism-librem5: add kconfig check for nftables (MR 2060) 2021-06-14 14:04:37 -07:00
Clayton Craft
035896c571
linux-nokia-n900: enable nftables support (MR 2060)
Based on https://wiki.gentoo.org/wiki/Nftables#Kernel
2021-06-14 13:29:34 -07:00
Dylan Van Assche
31b99cc224
device-pine64-pinephone: add Dylan Van Assche as co-maintainer (MR 2190) 2021-06-13 21:45:57 +02:00
Dylan Van Assche
ccf639f856
device-pine64-pinephone: detect headphones jack events (MR 2190)
Headset jack events emit 2 events: 'Headset Microphone Jack'
and 'Headphone Jack'. These were properly detected before,
but not headphone jack events only: 'Headphone Jack'.
This change allows to detect headphone jack events as well
and act on these events by setting the headphones as
default audio output while keeping the internal
microphone as audio input. For headsets,
the microphone is switched to the headset microphone as well.
2021-06-13 21:45:52 +02:00
Yassine Oudjana
ee581e5f16
device-xiaomi-scorpio: update and move to community (MR 2188)
- Add SLPI to nonfree_firmware description
- Add touchscreen and fuel gauge modules to the initramfs in preparation for
  osk-sdl and charging-sdl (or any new alternative) support
- Add pointercal file for osk-sdl

[ci:skip-vercheck]
2021-06-11 12:07:35 +02:00
Yassine Oudjana
14b1e693a5
firmware-xiaomi-scorpio: update and move to community (MR 2188) 2021-06-11 12:06:44 +02:00
Yassine Oudjana
b9a124c591
soc-qcom-msm8996: update and move to community (MR 2188)
Add linux-firmware-qcom as a dependency for nonfree_firmware to provide
non-signed GPU firmware.
2021-06-11 12:06:33 +02:00
Clayton Craft
49788fd83f
linux-purism-librem5: upgrade to 5.12.2purism3 (MR 2246)
Upstream changelog:
5e7d7535eb/debian/changelog
2021-06-11 11:54:10 +02:00
Er2
8c51cfffcd
alcatel-5010d: new device (MR 2152)
[ci:skip-build] already built successfully in CI
2021-06-10 16:45:24 -07:00
BO41
34a85fafa4
huawei-alice: add wifi firmware (MR 2234)
[ci:skip-build] already built successfully in CI
2021-06-10 16:15:59 -07:00
Jakob Hauser
6614be1f17
device/community: add swclock-offset dependency for affected SoCs (MR 2241)
Set package dependency "swclock-offset" to "soc-qcom-msm8916" and
"soc-qcom-sdm845".

These SoC's have a read-only real-time clock (RTC). The package
"swclock-offset" keeps an offset between the RTC and the system time.
2021-06-10 18:29:24 +03:00
alikates
ba429d4f71
device-xiaomi-daisy: Split mainline and downstream kernels (MR 2225)
[ci:skip-build] already built successfully in CI
2021-06-09 15:38:03 -07:00
alikates
a596b4fb5f
xiaomi-daisy: Change kernel to msm8953-mainline and add gpu firmware to initramfs (MR 2225) 2021-06-09 15:37:11 -07:00
alikates
a7ad7962d9
firmware-xiaomi-daisy: Update APKBUILD and add missing WCNSS and GPU firmware (MR 2225) 2021-06-09 15:37:04 -07:00
Stefan
4c0ec94eb4
samsung-zeroltexx: new device Samsung Galaxy S6 edge (G925F) (MR 2105)
Port based on an unofficial LineageOS port
from https://www.los-legacy.de/17.1/zerofltexx, using kernel from
https://github.com/Exynos7420/android_kernel_samsung_exynos7420/

What works:
- Kernel boots
- Display and touch input (tested with Weston)
- USB networking
- Wifi

For now only including Wifi drivers, as I wasn't yet able to
successfully test audio and camera subsystems (but I intentionally left
these firmware files commented out in the APKBUILD file).

[ci:skip-build]: already built successfully in CI
2021-06-09 00:23:48 +02:00
Caleb Connolly
62e5d30506
device-oneplus-fajita: flash the kernel automatically (MR 2215)
postmarketos-update-kernel works for us (with !2214)!
2021-06-08 10:44:42 -07:00
Caleb Connolly
0736f49759
device-oneplus-enchilada: flash the kernel automatically (MR 2215)
postmarketos-update-kernel works for us (with !2214)!
2021-06-08 10:44:42 -07:00
Ignacy Kuchciński
65ced8fdd1
huawei-warsaw: fix p2p related cpu stalls (MR 2232)
[ci:skip-build] already built successfully in CI
2021-06-08 09:38:49 -07:00
YSpoof
2f6eea09ac
motorola-odessa: new device (Motorola Moto G9 Plus) (MR 2224)
[ci:skip-build] Already built on CI in MR
2021-06-07 18:57:55 +03:00
Newbyte
aa0c95ac72
samsung-i9300: capitalise WiFi properly in nonfree_firmware subpackage pkgdesc (MR 2229) 2021-06-06 20:58:21 +02:00
Newbyte
69cd6ff843
samsung-i9300: add a warning regarding hardware failure (MR 2229)
This has been reported by two people now (me and Mark/nergzd723),
so I think it's reasonable to warn about this.
2021-06-06 20:58:18 +02:00
Ignacy Kuchciński
20a34f5b2d
huawei-warsaw: add firmware package and Wifi functionality (MR 2221)
[ci:skip-build]: already built successfully in CI
2021-06-06 17:56:47 +02:00
Newbyte
739d9f931d
device-samsung-skomer: add phosh config (MR 2220)
[ci:skip-build] already built successfully in CI
2021-06-04 14:36:31 -07:00
Clayton Craft
bf6ad7a78c
device-purism-librem5: set mesa env for using gles2 and opengl 2.1 (MR 2217)
These are needed to expose opengl 2.1, and for using gles2 with gst.
This also fixes launching Xwayland.
2021-06-03 00:03:00 +02:00
Dylan Van Assche
9125d49e8e
device-pine64-pinetab: improve PulseAudio sample rate 2021-06-02 18:57:54 +02:00
Dylan Van Assche
1ae70f921b
device-pine64-pinephone: improve PulseAudio sample rate 2021-06-02 18:57:48 +02:00
Caleb Connolly
be94e89c02
device-oneplus-fajita: fix osk-sdl (MR 2206)
Add the missing depends to add the GPU firmware to the initramfs
so that osk-sdl works properly, as well as the haptics driver.

Also make all logs go to UART, this will clean up the splash screen and
let developers with UART access debug the boot process.

[ci:skip-build] This MR was already built on CI
2021-06-01 21:13:39 +03:00
Caleb Connolly
8fe6b73d06
device-oneplus-enchilada: add audio and fix osk-sdl (MR 2206)
Add the missing depends for our soc package alsa ucm configs. Also add
the missing depends to add the GPU firmware to the initramfs so that
osk-sdl works properly!

Also enable logs and point them to UART, this will clean up the splash
screen and let any developers with UART attached to debug the boot
process.
2021-06-01 21:13:11 +03:00
Caleb Connolly
83413def86
soc-qcom-sdm845: update ucm profiles for op6 (MR 2206) 2021-06-01 21:13:08 +03:00
kf
d8d69fd7da
fairphone-fp3: new device (MR 2158) 2021-06-01 09:54:41 +02:00
Bart Ribbers
fb3365a982
lg-dory: modernize and add AsteroidOS machine config (MR 2204)
AsteroidOS uses this config file to determine how the UI should look
(e.g. a round or a square screen), and if some things like Wi-Fi are
supported. Upstream auto generates this config file, but it seems so
simple and small that I think it's better for us to just ship the file
next to the APKBUILD
2021-06-01 09:32:47 +02:00
Bart Ribbers
9488531c3e
lg-lenok: modernize and add AsteroidOS machine config (MR 2204)
AsteroidOS uses this config file to determine how the UI should look
(e.g. a round or a square screen), and if some things like Wi-Fi are
supported. Upstream auto generates this config file, but it seems so
simple and small that I think it's better for us to just ship the file
next to the APKBUILD
2021-06-01 09:32:47 +02:00
Oliver Smith
5d59fd43b9
pine64-pinetab: upower: replace config properly (MR 2205) 2021-05-30 17:01:39 +02:00
Oliver Smith
0b7e4d6371
pine64-pinephone: upower: replace config properly (MR 2205) 2021-05-30 17:01:39 +02:00
Dylan Van Assche
ead17254db
device-pine64-pinetab: shutdown on critical battery (MR 2193)
The PMIC AXP803 sends an interrupt to the A64 CPU when the
battery is critical low. This wakes up the tablet at ~10%
battery level, but UPower wasn't configured to add upon
this interrupt as the action level was way lower.
Therefore, the PMIC performed a hard shutdown when the
battery level dropped further, which may cause data loss.
2021-05-30 15:53:12 +02:00
Dylan Van Assche
cfb5d41bdf
device-pine64-pinephone: shutdown on critical battery (MR 2193)
The PMIC AXP803 sends an interrupt to the A64 CPU when the
battery is critical low. This wakes up the phone at ~10%
battery level, but UPower wasn't configured to add upon
this interrupt as the action level was way lower.
Therefore, the PMIC performed a hard shutdown when the
battery level dropped further, which may cause data loss.
2021-05-30 15:53:01 +02:00
Svyatoslav Ryhel
392a83adea
testing/firmware-asus-transformer: update nvram configs (MR 2123)
TF201 nvram was updated since previous did not work on some devices.
Added support for TF101, TF300TG and TF300TL.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2021-05-29 13:06:46 +02:00
Svyatoslav Ryhel
165094c86e
asus-tf700t: new device (ASUS Transformer Infinity) (MR 2123)
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2021-05-29 13:06:38 +02:00
Bart Ribbers
248989c316
pine64-pinetab: depend on u-boot >= 2021.01_git20201228-r2 (MR 2149) 2021-05-27 14:13:16 +02:00
Bart Ribbers
5a5a3cd619
pine64-pinephone: depend on u-boot >= 2021.01_git20201228-r2 (MR 2149) 2021-05-27 14:13:16 +02:00
Clayton Craft
6aa9506169
linux-purism-librem5: upgrade to 5.12.2pureos2 (MR 2199)
Upstream changelog:
  fe856fdde1

[ci:skip-build]: already built successfully in CI
2021-05-27 02:59:54 +02:00
Oliver Smith
113f829715
tablet-x64uefi: use grub instead of gummiboot (MR 2195)
Gummiboot was dropped from Alpine. Switch to grub, which is what we use
for tablet-x86uefi too.

In contrary to tablet-x86uefi, run the grub-mkimage command directly
inside the device package:
* This avoids creating another confusing grub-x86 like package (looks
  like the x86 version of alpine's grub package, as it's the case with
  grub-efi-x86, but actually it is just the result of grub-mkimage).
* In contrary to grub-efi-x86, the resulting efi file is not shared
  across several devices.
* It's consistent with uboot mkimage commands, which we also run in
  device packages.

Related: 398b7aef0b
2021-05-24 23:30:47 +02:00
Oliver Smith
99eb9b2fb5
pine64-pinetab: lower headphone volume to 70% (MR 2182) 2021-05-21 20:02:39 +02:00
Oliver Smith
cfe73e6680
pine64-pinephone: lower headphone volume to 70% (MR 2182)
We used to have it at 40% and just bumped it to 100%. With 100%, I can
hear static noise in the headphones when using the PinePhone (pmOS CE)
in a silent room, even if I turn the volume down in Pulseaudio (e.g.
18%-30% in Phosh). This was not the case when we had it at 40%.

70% seems to be the sweet spot, where no static noise can be heard when
using headphones in a silent room, but where volume can still be turned
up to a very high level if necessary.
2021-05-21 20:02:04 +02:00
Oliver Smith
21a2b0f5ea
pine64-pinetab: add gtk4 artifacts workaround (MR 2132) 2021-05-21 00:44:57 +02:00
Oliver Smith
5e227888fc
pine64-pinephone: add gtk4 artifacts workaround (MR 2132) 2021-05-21 00:44:53 +02:00
Julian Weigt
f4778e85a3
sony-suzuran: new device (MR 2179) 2021-05-20 22:47:22 +02:00
Robin de Rooij
5ae89366c7
samsung-serranolte: change device name to real codename (MR 2175)
[ci:skip-build]: already built successfully in CI
2021-05-20 21:48:09 +02:00
Robin de Rooij
8871f4924f
samsung-i9195: port to armv7 and enable swrast (MR 2175)
Ported succesfully to armv7. Everything that worked on armhf
works on armv7 as well: touch, wifi, usb networking etc.

SWRast (gallium) was not enabled but is needed because the device
does not support 3D acceleration yet.
2021-05-20 21:48:01 +02:00
Dylan Van Assche
094f15a104
device-pine64-pinetab: increase maximum volume headphone jack (MR 2170)
Headphones are not so quiet anymore from now on!
2021-05-20 13:08:26 +02:00
Dylan Van Assche
a38ca6c0e5
device-pine64-pinephone: increase maximum volume headphone jack (MR 2170)
Headphones are not so quiet anymore from now on!
2021-05-20 13:08:26 +02:00
Minecrell
5012bf043e
unmaintained/samsung-a5lte-downstream: new device (Samsung Galaxy A5) (MR 2177)
[ci:skip-build] Already built fine on CI
2021-05-20 02:36:39 +03:00
Minecrell
81e081b45b
unmaintained/samsung-a5ulte-downstream: new device (Samsung Galaxy A5) (MR 2177) 2021-05-20 02:01:22 +03:00
Julian Braha
c2470162f9
oneplus-guacamole: add missing deviceinfo lines (MR 2173) 2021-05-19 23:47:16 +02:00
Stephan G
b626cc84b9
jolla-sbj: various features (MR 2172) 2021-05-19 10:37:17 +02:00
Duje Mihanovic
97ca96ceb0
lg-vee3e: fix red tint on display (MR 2176)
[ci:skip-build] Already built successfully on CI
2021-05-18 21:44:00 +02:00
Clayton Craft
2cd1f8d5c5
linux-purism-librem5: upgrade to 5.12.2 (MR 2157)
Upstream changelog:
ca736e844a

Patches rebased, and includes some new fixes:

arm64-dts-imx8mq-librem5.dtsi-adjust-the-usdhc-bus-s.patch

- Being tested by Purism as well, has shown some promise improving GPS
  reliability

arm64-dts-imx8mq-disable-SuperSpeed-instances-in-par.patch

- Fixes issue with modem disappearing
2021-05-14 11:04:03 +02:00
Andrea Scarpino
0a83652947
lg-lenok: change arch from armhf to armv7 (MR 2169) 2021-05-14 10:59:37 +02:00
Stephan G
82e0ce9295
jolla-sbj: modem and wifi firmware (MR 2165) 2021-05-12 23:40:49 +02:00
Joel Selvaraj
3c0712c65a
xiaomi-beryllium: add support for EBBG panel variant (MR 2166) 2021-05-12 18:27:16 +02:00
Andrea Scarpino
55e126f9f8
eagle: fix red display (MR 2167) 2021-05-12 18:22:54 +02:00
Stephan G
eefbc449ea
jolla-sbj: ARGB fix and downstream kernel update (MR 2164) 2021-05-12 17:56:25 +02:00
Ignacy Kuchciński
33cbe47654
device/*/linux-*: enable CONFIG_DEVPTS_MULTIPLE_INSTANCES for <4.7 (MR 2145)
This is required for kernels earlier than 4.7 for bwrap to work for
normal users, and therefore for gnome web (epiphany) and flatpak.

[ci:skip-build] [ci:ignore-count]
2021-05-11 02:59:25 +03:00
BO41
0133642c8b
huawei-kiwi: update – adding various features (MR 2161)
- add INSTALL_MOD_STRIP
- fix SD card detection
- enable vibrator
- enable hall sensor
- add accelerometer
- fix splash screen
- allow FDE
- enable fuel gauge

[ci:skip-build] already built successfully in CI
2021-05-09 00:44:22 -07:00
Julian Braha
a7b00934ac
main/linux-postmarketos-qcom-sm8150: new aports (MR 2151)
[ci:skip-build] already built successfully in CI
2021-05-09 00:39:57 -07:00
Julian Braha
23f20f688f
device-oneplus-guacamole: new aports (MR 2151) 2021-05-09 00:39:57 -07:00
stephan
32203df69e
jolla-sbj: update arch to armv7 (MR 2160)
[ci:skip-build] already built successfully in CI
2021-05-09 00:30:48 -07:00
Clayton Craft
f2eb092f05
pine64-a64lts: enable tty on serial ttyS0 (MR 2156) 2021-05-09 01:05:09 +03:00
Oliver Smith
8c3b2b519b
pine64-dontbeevil: use correct u-boot file (MR 2148) 2021-05-05 01:42:44 +02:00
Oliver Smith
0543c48d44
lark-freeme-70-2s: use correct u-boot file (MR 2148) 2021-05-05 01:42:44 +02:00
Oliver Smith
a002953fd4
goclever-gcta741l: use correct u-boot file (MR 2148) 2021-05-05 01:42:44 +02:00
Oliver Smith
df3f53757b
cubietech-cubieboard: use correct u-boot file (MR 2148) 2021-05-05 01:42:44 +02:00
Clayton Craft
9bc2eb6d58
pine64-a64lts: use correct u-boot file (MR 2148)
This device uses u-boot in Alpine's u-boot-pine64 package, and NOT from
the u-boot in pmaports, so the freq-specific u-boot files don't exist.
2021-05-05 01:42:44 +02:00
Federico Proverbio
9371b11f57
lg-d802: new device (LG G2 international version) (MR 2147)
[ci:skip-build]: already built successfully in CI
2021-05-05 00:34:14 +02:00
Oliver Smith
877c9fec9e
tablet-x64-uefi: support booting from usb 2.0 (MR 2146)
Add ehci_pci kernel module to initramfs.
2021-04-30 17:49:57 +03:00
michaszek8
7ec5f99ee6
samsung-n1awifi: new device (Samsung Galaxy Note 10.1 2014) (MR 2135)
[ci:skip-build] Already built on CI in MR
2021-04-28 21:25:41 +03:00
Clayton Craft
22cee921f7
linux-purism-librem5: upgrade to 5.11.15 (MR 2140)
Upstream changelog:
4e76143d2e

Note, previous wifi driver behavior is not changed. The redpine module
still expects the fw to be in /lib/firmware on boot, and won't use the
fw on the card.. Theoretically this kernel version now supports both
loading fw from rootfs into ram AND using fw burned on the chip, but
since I haven't tested that well yet I'm leaving this as-is.

[ci:skip-build]: already built successfully in CI
2021-04-27 23:34:34 +02:00
Bart Ribbers
27b8ef368f
*/*: replace uboot-tools dependency for u-boot-tools (MR 2141)
uboot-tools is provided by u-boot-tools but sometimes apk still gets
confused. This change prevents errors such as

pine64-pinephone:~$ sudo apk upgrade --verbose
WARNING: Failed to perform initial self-upgrade, continuing with full upgrade.
ERROR: unable to select packages:
  uboot-tools (virtual):
	    provided by: u-boot-tools
			    required by: device-pine64-pinephone-0.25-r1[uboot-tools]
[ci:ignore-count]
[ci:skip-build]: already built in CI successfully
2021-04-27 22:01:06 +02:00
Gianluca Boiano
67b8752891
linux-xiaomi-vince: upgrade to 4.9.267 (MR 2136)
[ci:skip-build]: already built successfully in CI
2021-04-27 21:54:54 +02:00
Jean Lucas
a26f90360d
pine64-rockpro64: Initial firmware package, AP6359SA (MR 2117)
The AP6359SA is a BCM4359 SDIO-based Wi-Fi/Bluetooth module that PINE64
sells specifically for the ROCKPro64 device. This commit starts a
firmware package to support it specifically, while others can later add
firmware for other modules sold for the device. Also add this package as
a nonfree subpackage dependency in the ROCKPro64 device APKBUILD.

I was unable to find a suitable license for the firmware blobs, so until
we find a suitable repository containing all of the required files by
the module with a license included, or contact the vendor directly,
let's use LibreELEC's repository without a license for now.

[ci:skip-build]: already built successfully in CI
2021-04-25 15:41:21 +02:00
rahmanshaber
6b0cc4f335
lg-bullhead: add firmware package (MR 2128) 2021-04-25 14:55:48 +02:00
Bart Ribbers
9392512166
qemu-{amd64,aarch64}: prevent display blanking when mce is in use (MR 2127)
mce is used by both Glacier and Asteroid to do all kind of power
management related stuff, including blanking the display. However,
obviously we don't ever want to blank the display on Qemu
2021-04-22 15:50:16 +02:00
Max1Truc
c872ed9fcf
klipad-rel: new device (MR 2108) 2021-04-20 14:14:26 +02:00
Henrik Grimler
3f51f87c72
New device: Galaxy Tab S 8.4 LTE samsung-klimtlte [MR 2084]
Almost identical to packages for chagallwifi, but kernel requires
config changes.

[ci:skip-build] already built successfully in CI
2021-04-19 00:04:56 -07:00
Clayton Craft
38e689e5ab
linux-purism-librem5: upgrade to 5.11.11pureos1 (MR 2116)
Upstream changelog:
6dcba4b588

The redpine interrupt handler patch has been dropped since it's now
merged in Purism's tree.

[ci:skip-build]: already built successfully in CI
2021-04-18 23:55:58 +02:00
Sam Bickley
03f4d02df2
nvidia-shieldtablet: new device (MR 2112)
[ci:skip-build]: already built successfully in CI
2021-04-18 23:33:28 +02:00
Minecrell
96c3a7450a
community/samsung-a3(u)lte: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Minecrell
7a8b981dba
community/samsung-serranovelte: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Minecrell
2b54e057b5
community/samsung-a5(u)lte: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Minecrell
d463361835
community/motorola-harpia: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the boot
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Clayton Craft
e3715a2d4e
main/linux-purism-librem5: move from community (MR 2096)
[ci:skip-vercheck]: moving unchanged packages
[ci:skip-build]: moving unchanged packages
2021-04-17 22:41:10 -07:00
Clayton Craft
313bb89139
main/device-purism-librem5: move from community (MR 2096) 2021-04-17 22:40:45 -07:00
Clayton Craft
23b54b0f05
{device,linux}-purism-librem5: Add Bhushan Shah as co-maintainer (MR 2096) 2021-04-17 22:40:26 -07:00
kekzoz
1a309493ac amazon-soho: add firmware package and WiFi functionality (MR 2109)
amazon-soho: bump pkgrels

amazon-soho: bump pkgrel again

[ci:skip-build] already built successfully in CI
2021-04-17 09:50:22 +00:00
Caleb Connolly
99f5924d47
device-oneplus-fajita: osk-sdl support and cleanup (MR 2088)
Make needed deviceinfo changes to support osk-sdl, add "quiet" to the
cmdline and bump the package version to 1.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-vercheck]
2021-04-16 19:21:27 +02:00
Caleb Connolly
0d7b714f4a
device-oneplus-enchilada: osk-sdl support and cleanup (MR 2088)
Make needed deviceinfo changes to support osk-sdl, add "quiet" to the
cmdline and bump the package version to 1.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-04-16 19:20:52 +02:00
Caleb Connolly
7ef84a37fc
firmware-oneplus-sdm845: add firmware to initramfs (MR 2088)
Add a subpackage to ensure that GPU firmware is included in initramfs so
that osk-sdl can work.

[ci:skip-vercheck]

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-04-16 19:13:07 +02:00
Caleb Connolly
36eca9bdda
soc-qcom-sdm845: move to community (MR 2088)
[ci:skip-vercheck]
2021-04-16 19:13:07 +02:00
Caleb Connolly
32b488e401
firmware-oneplus-sdm845: move to community (MR 2088) 2021-04-16 19:13:06 +02:00
Caleb Connolly
11be4d37ab
device-oneplus-fajita: move to community (MR 2088) 2021-04-16 19:13:05 +02:00
Caleb Connolly
507adfddbe
device-oneplus-enchilada: move to community (MR 2088) 2021-04-16 19:13:04 +02:00
Minecrell
c1c42c74b8
community/xiaomi-wt88047: move from testing (MR 2073)
[ci:skip-vercheck]: No meaningful change here
2021-04-16 13:16:45 +02:00
cristian_ci
129f07ee23
lg-m216: new device (LG K10) (MR 1873) 2021-04-14 11:56:59 +03:00
Martijn Braam
a5330dad55
device-samsung-j3xnlte: fix up kernel name
It seems the kernel and device got renamed but the dependency between
them wasn't. This fixes BPO
2021-04-13 20:09:29 +02:00
Oliver Smith
caae6d5405
treewide: bump pkgrel to generate new splashes (MR 1996) 2021-04-11 19:52:37 +02:00
Minecrell
3d50fe77da
unmaintained/xiaomi-wt88047-downstream: new device (Xiaomi Redmi 2) (MR 2085)
This device port is unmaintained: The mainline port (xiaomi-wt88047)
is preferred. This is only intended for testing, and was used to validate
the battery/charging driver as one example. Various patches are used
for the downstream kernel that expose helpful information for debugging.

[ci:skip-build]: already built successfully in CI
2021-04-05 15:08:28 +02:00
Bobby The Builder
259c9eefe5
pine64-*: change default RAM clock from 552 to 528 (MR 1998)
Issue #981 Change default clock from 552 to 528
(latest batches such as KDE are having issues with 552)
2021-04-05 11:14:18 +02:00
Bobby The Builder
ba84cd8d49
temp/u-boot-pinephone: expose ram_freq in device tree (MR 1998)
Query the ram clock:
cat /proc/device-tree/memory/ram_freq
2021-04-05 11:14:17 +02:00
Bobby The Builder
5322350898
temp/u-boot-pinephone: build with 3 RAM clocks (MR 1998)
U-Boot package will be built and packaged with tree
different images, each with a custom RAM clock.

Supported clocks: 528, 552 and 624
2021-04-05 11:14:13 +02:00
kekzoz
df9cffb0e4
amazon-soho: new device (MR 2056) 2021-04-05 09:32:13 +02:00
Clayton Craft
de0bc01e34
purism-librem5: fix bluetooth by disabling LE mode (MR 2089)
This forces coex. mode to only support BT classic/EDR, and disabled LE.
When LE coex. is enabled, BT controller init fails.

see: https://gitlab.com/postmarketOS/pmaports/-/issues/1042
fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/976
2021-04-03 10:58:24 -07:00
Minecrell
aa1eefc44a
unmaintained/bq-paella-downstream: cleanup, add various debug patches (MR 2081)
These are various debugging related patches that I have used over the time
when attempting to get new features working for the mainline kernel.
Given that the downstream kernel is just intended for debugging in this case,
it seems convenient to add them to pmaports so I don't need to go search for
them in case I need them again in the future.

[ci:skip-build] Already built on CI
2021-03-31 23:49:26 +03:00
Oliver Smith
a909e543f3
nokia-n900: add PMOS_FORCE_PARTITION_RESIZE (MR 2076)
Resize the partition when using a pre-built image. We didn't notice that
this was missing, because N900 images are new and we only tested from
pmbootstrap install --sdcard, which already uses the full SD card size.
2021-03-30 23:03:49 +02:00
Oliver Smith
a9a343dc16
pine64-pinephone: drop setup-modem.sh.ofono (MR 2066)
Now that eg25-manager is able to send the AT commands to the modem, even
when ofono is used, drop the ofono specific script.
2021-03-28 23:26:36 +02:00
Alexey Minnekhanov
bb12ca1424
device-samsung-klte: workaround to probe bluetooth reliably (MR 2015)
Buetooth modules have to be probed after Wi-Fi ones.
2021-03-28 03:53:01 +03:00
Alexey Minnekhanov
2735b9b64b
firmware-samsung-klte: add Bluetooth firmware (MR 2015) 2021-03-28 03:52:57 +03:00
Alexey Minnekhanov
21673bb9d0
device-lg-hammerhead: workaround to probe bluetooth reliably (MR 2015)
Buetooth modules have to be probed after Wi-Fi ones.
2021-03-28 03:52:54 +03:00
Alexey Minnekhanov
130ae69c69
lg-hammerhead: move Wi-Fi firmware file to firmware package (MR 2015)
brcmfmac4339-sdio.txt file does not belong to device package.
2021-03-28 03:52:51 +03:00
Alexey Minnekhanov
c760101d68
device-lg-hammerhead: remove unused file and sort sources (MR 2015)
modules-load.conf was completely unused by this package,
not installed anywhere. brcmfmac is loaded automatically anyway.

Sort values in sources= alphabetically
2021-03-28 03:52:47 +03:00
Luca Weiss
6eeab7840c
msm8974 devices: allow vram carveout (MR 2015)
This is needed with the 5.11 kernel. Also adjust the vram & cma sizes
for all msm8974 devices.

The CMA size is 256MB as set in the kernel config.

VRAM is default 16MB although it is set to 192MB with a kernel patch;
but set it manually for all devices to make it possible to remove this
patch in the future - until we have IOMMU working.
2021-03-28 03:52:43 +03:00
JuniorJPDJ
698a49058d
lark-freeme-70-2s: new device (MR 2040)
still missing:
* touchscreen driver
* front camera

[ci:skip-build] Already built fine on CI
2021-03-28 00:37:38 +03:00
JuniorJPDJ
a39240bce7
goclever-gcta741l: new device (MR 2040)
still missing:
* audio
* lcd backlight control
* touchscreen driver
* front camera
* accelerometer mount fix (driver seem not to support mount-matrix)
* 3D acceleration
* HDMI support
2021-03-27 17:48:08 +00:00
Clayton Craft
3d09f9c10d
device-purism-librem5: add nonfree subpackage w/ wifi/bt firmware (MR 2059)
Workaround for https://source.puri.sm/Librem5/linux-next/-/issues/290

This requires a kernel with the flash mode *disabled* in the Redpine
RS911x driver.

[ci:skip-build] already passed CI
2021-03-27 18:37:12 +01:00
Clayton Craft
ddf56b5169
linux-purism-librem5: disable RS9116 fw flashing (MR 2059)
This allows loading nonfree fw from rootfs (/lib/firmware), to work
around: https://source.puri.sm/Librem5/linux-next/-/issues/290

This change will break wifi unless the nonfree
firmware-siliconlabs-rs9116 package is installed.
2021-03-27 18:37:11 +01:00
Clayton Craft
b8c77b240e
device/community/firmware-siliconlabs-rs9116: new aport (MR 2059)
This packages the nonfree Silicon Labs RS9116 firmware, required by the
RS9116 chip when flash mode is *not* enabled in the kernel driver.
2021-03-27 18:37:10 +01:00
Clayton Craft
aaca2d5d38
linux-purism-librem5: upgrade to 5.11.6 (MR 2059)
Upstream changelog:
61e6fc1d50
2021-03-27 18:37:02 +01:00
Yassine Oudjana
0b12d68ae6
xiaomi-scorpio: switch to mainline kernel (MR 2063)
[ci:skip-build] already passed CI
2021-03-27 18:23:23 +01:00
Yassine Oudjana
45cf222a72
firmware-xiaomi-scorpio: new aport (MR 2063) 2021-03-27 20:12:45 +04:00
Yassine Oudjana
d44da6db7d
oneplus-oneplus3t: add soc-qcom-msm8996 dependency (MR 2063) 2021-03-27 20:11:30 +04:00
Yassine Oudjana
65c099277d
oneplus-oneplus3: add soc-qcom-msm8996 dependency (MR 2063) 2021-03-27 20:10:51 +04:00
Yassine Oudjana
9075406d79
soc-qcom-msm8996: new aport (MR 2063) 2021-03-27 20:10:34 +04:00
Angus Gibson
9738f61aa5
lenovo-tb8504f: new device (Lenovo Tab 4 8) (TB-8504F) (MR 2048)
[ci:skip-build] Already built in CI
2021-03-25 20:37:39 -07:00
Oleg Chernovskiy
88da612343
device-oneplus-bacon: Add firmware dependency (MR 2027) 2021-03-25 20:32:26 -07:00
Oleg Chernovskiy
754902d3ae
device/testing/firmware-oneplus-bacon: new aport (MR 2027) 2021-03-25 20:31:36 -07:00
frojnd
da4afb710b
linux-motorola-falcon: fix fb format, upgrade to latest commit (MR 2058)
[ci:skip-build] Already built successfully on CI
2021-03-24 17:18:10 +03:00
Vincent Knecht
bd3f2f5933
alcatel-idol347: new device (MR 2050)
New mainline port with most things working (usb/wifi/bt/3d-accel/sound/gps).
Modem/calls/sms/mobile-data should work but couldn't test it recently
due to broken devices.
2021-03-23 20:29:41 +01:00
Minecrell
47ec08d635
community/soc-qcom-msm8916: update UCM files (MR 2039)
- Fix speaker on xiaomi-mido
- Add UCM configuration for alcatel-idol347
2021-03-22 21:22:08 +01:00
Minecrell
e9275054fa
xiaomi-wt88047: include smb1360 (battery/charger driver) in initfs (MR 2039)
This is needed for USB to initialize correctly.
2021-03-22 21:22:08 +01:00
Minecrell
b208647c58
bq-paella: include smb1360 (battery/charger driver) in initfs (MR 2039)
This is needed for USB to initialize correctly.
2021-03-22 21:22:08 +01:00
Dylan Van Assche
a57d0c630e
device-pine64-pinephone: Override eg25-manager configs (MR 1931)
Figured out with a Quectel engineer and the ModemManager maintainer
2021-03-22 21:20:31 +01:00
Dylan Van Assche
2055cfad30
device-pine64-pinephone: disable ModemManager's suspend/resume hooks (MR 1931) 2021-03-22 21:20:06 +01:00
Martijn Braam
15d740b746
device/pine64-pinebookpro: switch to mainline (MR 2021)
* Add u-boot build with a lot of patches that makes the display work in
  u-boot for boot selection
* Upgrade the rockchip kernel to 5.11 mainline with config for the
  rk3399 devices built-in
* Make the rockpro64 and pinebook pro use the newer kernel

[ci:skip-build]
2021-03-22 00:41:27 +01:00
Minecrell
86eff19e0b
community/asus-me176c: fix splash screen width and phosh scaling (MR 2047)
Actually the display in asus-me176c has a width of 800px, which means
that the splash screen isn't perfectly centered. Correct this in
deviceinfo to make it show up correctly.

Also, add configuration file for Phosh to reduce scaling a bit to 1.75.
It's kind of subjective but scaling = 2 definitely feels too large.

[ci:skip-build]: already built successfully in CI
2021-03-21 21:17:59 +01:00
Minecrell
2094a44b23
community/linux-asus-me176c: upgrade to 5.4.107 (MR 2047) 2021-03-21 21:17:57 +01:00
Clayton Craft
56a0531ad2
linux-purism-librem5: build led-pattern driver into kernel (MR 2043)
There's a race condition between when the pwmled device is initialized,
which kicks off a feedbackd udev rule that configures the led trigger to
'pattern', and when ledtrig_pattern actually loads. It seems to mostly
load after the rule runs, so the trigger is never set to 'pattern' on
boot.

This removes the race by building the ledtrig_pattern driver into the
kernel.

[ci:skip-build] Already build successfully in CI
2021-03-21 10:54:29 -07:00