device-pine64-pinephone: Override eg25-manager configs (MR 1931)
Figured out with a Quectel engineer and the ModemManager maintainer
This commit is contained in:
Dylan Van Assche
Minecrell
parent
2055cfad30
commit
a57d0c630e
4 changed files with 154 additions and 1 deletions
|
|
@ -4,7 +4,7 @@
|
|||
# Co-Maintainer: Bart Ribbers <bribbers@disroot.org>
|
||||
# Co-Maintainer: Clayton Craft <clayton@craftyguy.net>
|
||||
pkgname=device-pine64-pinephone
|
||||
pkgver=0.22
|
||||
pkgver=0.23
|
||||
pkgrel=0
|
||||
pkgdesc="PINE64 PinePhone"
|
||||
url="https://postmarketos.org"
|
||||
|
|
@ -48,6 +48,9 @@ source="
|
|||
modemmanager.conf
|
||||
setup-modem.sh
|
||||
setup-modem.sh.ofono
|
||||
eg25-pinephone-1.0.toml
|
||||
eg25-pinephone-1.1.toml
|
||||
eg25-pinephone-1.2.toml
|
||||
sysrq.conf
|
||||
uboot-script.cmd
|
||||
ucm/HiFi.conf
|
||||
|
|
@ -114,6 +117,12 @@ package() {
|
|||
"$pkgdir"/usr/lib/udev/rules.d/
|
||||
install -Dm644 "$srcdir"/modemmanager.conf \
|
||||
"$pkgdir"/etc/conf.d/modemmanager
|
||||
install -Dm644 "$srcdir"/eg25-pinephone-1.0.toml \
|
||||
"$pkgdir"/etc/eg25-manager/pine64,pinephone-1.0.toml
|
||||
install -Dm644 "$srcdir"/eg25-pinephone-1.1.toml \
|
||||
"$pkgdir"/etc/eg25-manager/pine64,pinephone-1.1.toml
|
||||
install -Dm644 "$srcdir"/eg25-pinephone-1.2.toml \
|
||||
"$pkgdir"/etc/eg25-manager/pine64,pinephone-1.2.toml
|
||||
|
||||
# Wifi / PM
|
||||
install -Dm644 "$srcdir"/70-wifi-pm.rules -t \
|
||||
|
|
@ -171,6 +180,9 @@ ccbc83b84b5028bc2c8e526759004ce71b50b2675ecffee98f5676c70a3332197a231ff9d2fd4644
|
|||
3d6e9030125afc1dc3b654d1ce5d124ddd3ef3ad1a4d3e46c8168cf3f8a3762ffd0c75427759740ae26bd5c4f32b6704b7cf7e5806434884560fa704b7e72921 modemmanager.conf
|
||||
fa063e2863afc48e627acc1a5b213a81499ba1dd30325f74f118a44e3964aec7e597b1f4bd318b7cf5bf14f27daf88e6ad9fc277ab106cbbe1189fdcc650d5c1 setup-modem.sh
|
||||
0c81d758e1bcb56ed2cdaf91124121ebbd4dd7a5e25f02a7685b837faf660949d05f6b07b39a1c6a9ca22a7029cdcf3c6dac8f1038e37c8a34cb7c5702e9df51 setup-modem.sh.ofono
|
||||
f9386dfd902028988c9659bd6e001ba46ea87b35f5dce7723dd4cfbe971928c75f6fef9d706201d62cc24cca2d499a39c8c0fed58a3403e2cb848eb1aece0e19 eg25-pinephone-1.0.toml
|
||||
cf7d4a611701745762f19746e40d87b6df14a6b24f2d466c4177b7ab5ee87a048bab719a6c66722198020e1aa73d3e12d3715b5588bc33bf207f3e86040dcc44 eg25-pinephone-1.1.toml
|
||||
8adeca98002ff8ee850512f72f2e126348cfa817a1aefdd77d103aee76a6b2e6a024deffcbeef1235ee2fcc766003f55b67cedb3eb06ca92a58d5b81f2bf6848 eg25-pinephone-1.2.toml
|
||||
f4b5509fd6a8b23f3667f5e7262b3a19c607a37cb9eaf7d0e93eb826d45c26ec12df4810879bacb8e4042bb83cc80b2b436224c8d47b6d67361369a724bbf7ee sysrq.conf
|
||||
b20d4fb9f08a1bbc1c12ce6940e438a00f5c8d400fbc5071e951ffc69f77d2421204472e86f1a7df0488d250f3ec16205b75d4eac8c3cb5521fe9a02ea24865a uboot-script.cmd
|
||||
de88fc198c11637d9c6465f8a6fb4deab3d0802bdb52ffaa9a08833aa0ef63689b674b12b44cb314f3870d9d21fc3ae55f8db03c9a838860301be60a88e48835 HiFi.conf
|
||||
|
|
|
|||
49
device/main/device-pine64-pinephone/eg25-pinephone-1.0.toml
Normal file
49
device/main/device-pine64-pinephone/eg25-pinephone-1.0.toml
Normal file
|
|
@ -0,0 +1,49 @@
|
|||
[manager]
|
||||
need_libusb = true
|
||||
usb_vid = 0x2c7c
|
||||
usb_pid = 0x0125
|
||||
|
||||
# Uncomment the following if you need to change the modem detection timeout on
|
||||
# resume and/or the time during which suspend is blocked after modem boot
|
||||
#[suspend]
|
||||
#boot_timeout = 120
|
||||
#recovery_timeout = 9
|
||||
|
||||
[gpio]
|
||||
dtr = 358
|
||||
pwrkey = 35
|
||||
reset = 68
|
||||
apready = 231
|
||||
disable = 232
|
||||
|
||||
[at]
|
||||
uart = "/dev/ttyS2"
|
||||
configure = [
|
||||
# Each command has 4 possible elements:
|
||||
# * `cmd` : the AT command itself, which will be translated to "AT+`cmd`"
|
||||
# * `subcmd`: the subcommand in case a single AT command can be used
|
||||
# to change multiple parameters, such as QCFG (optional)
|
||||
# * `value` : the commands, argument, usually used to set the value of
|
||||
# a specific parameter (optional)
|
||||
# * `expect`: the expected return value; the command is first executed
|
||||
# without any value in order to query the current state. This
|
||||
# state is then compared to the `expect` string; if they don't
|
||||
# match, the command is then executed with value `expect` in
|
||||
# order to set the parameter to the configured value (optional)
|
||||
# A command can have `expect` OR `value` configured, but it shouldn't have both
|
||||
{ cmd = "QGMR" },
|
||||
{ cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
|
||||
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
|
||||
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
|
||||
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
|
||||
{ cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
|
||||
{ cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
|
||||
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
|
||||
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
|
||||
{ cmd = "QSCLK", value = "1" },
|
||||
]
|
||||
suspend = [
|
||||
]
|
||||
resume = [
|
||||
]
|
||||
reset = [ { cmd = "CFUN", value = "1,1" } ]
|
||||
50
device/main/device-pine64-pinephone/eg25-pinephone-1.1.toml
Normal file
50
device/main/device-pine64-pinephone/eg25-pinephone-1.1.toml
Normal file
|
|
@ -0,0 +1,50 @@
|
|||
[manager]
|
||||
need_libusb = true
|
||||
usb_vid = 0x2c7c
|
||||
usb_pid = 0x0125
|
||||
|
||||
# Uncomment the following if you need to change the modem detection timeout on
|
||||
# resume and/or the time during which suspend is blocked after modem boot
|
||||
#[suspend]
|
||||
#boot_timeout = 120
|
||||
#recovery_timeout = 9
|
||||
|
||||
[gpio]
|
||||
dtr = 358
|
||||
pwrkey = 35
|
||||
reset = 68
|
||||
apready = 231
|
||||
disable = 232
|
||||
|
||||
[at]
|
||||
uart = "/dev/ttyS2"
|
||||
configure = [
|
||||
# Each command has 4 possible elements:
|
||||
# * `cmd` : the AT command itself, which will be translated to "AT+`cmd`"
|
||||
# * `subcmd`: the subcommand in case a single AT command can be used
|
||||
# to change multiple parameters, such as QCFG (optional)
|
||||
# * `value` : the commands, argument, usually used to set the value of
|
||||
# a specific parameter (optional)
|
||||
# * `expect`: the expected return value; the command is first executed
|
||||
# without any value in order to query the current state. This
|
||||
# state is then compared to the `expect` string; if they don't
|
||||
# match, the command is then executed with value `expect` in
|
||||
# order to set the parameter to the configured value (optional)
|
||||
# A command can have `expect` OR `value` configured, but it shouldn't have both
|
||||
{ cmd = "QGMR" },
|
||||
{ cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
|
||||
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
|
||||
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
|
||||
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
|
||||
{ cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
|
||||
{ cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
|
||||
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
|
||||
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
|
||||
{ cmd = "QSCLK", value = "1" },
|
||||
]
|
||||
suspend = [
|
||||
]
|
||||
resume = [
|
||||
]
|
||||
reset = [ { cmd = "CFUN", value = "1,1" } ]
|
||||
|
||||
42
device/main/device-pine64-pinephone/eg25-pinephone-1.2.toml
Normal file
42
device/main/device-pine64-pinephone/eg25-pinephone-1.2.toml
Normal file
|
|
@ -0,0 +1,42 @@
|
|||
# Uncomment the following if you need to change the modem detection timeout on
|
||||
# resume and/or the time during which suspend is blocked after modem boot
|
||||
#[suspend]
|
||||
#boot_timeout = 120
|
||||
#recovery_timeout = 9
|
||||
|
||||
[gpio]
|
||||
dtr = 34
|
||||
pwrkey = 35
|
||||
reset = 68
|
||||
apready = 231
|
||||
disable = 232
|
||||
status = 233
|
||||
|
||||
[at]
|
||||
uart = "/dev/ttyS2"
|
||||
configure = [
|
||||
# Each command has 4 possible elements:
|
||||
# * `cmd` : the AT command itself, which will be translated to "AT+`cmd`"
|
||||
# * `subcmd`: the subcommand in case a single AT command can be used
|
||||
# to change multiple parameters, such as QCFG (optional)
|
||||
# * `value` : the commands, argument, usually used to set the value of
|
||||
# a specific parameter (optional)
|
||||
# * `expect`: the expected return value; the command is first executed
|
||||
# without any value in order to query the current state. This
|
||||
# state is then compared to the `expect` string; if they don't
|
||||
# match, the command is then executed with value `expect` in
|
||||
# order to set the parameter to the configured value (optional)
|
||||
# A command can have `expect` OR `value` configured, but it shouldn't have both
|
||||
{ cmd = "QGMR" },
|
||||
{ cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
|
||||
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
|
||||
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
|
||||
{ cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
|
||||
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
|
||||
{ cmd = "QSCLK", value = "1" },
|
||||
]
|
||||
suspend = [
|
||||
]
|
||||
resume = [
|
||||
]
|
||||
reset = [ { cmd = "CFUN", value = "1,1" } ]
|
||||
Loading…
Add table
Reference in a new issue