Fixes a bug introduced with v6 mode that I didn't notice until now.
Probably not many v3 repos left out there, and upgrading them to v6 mode
is not disastrous, only a little premature.
This commit was sponsored by Riku Voipio
.. and have to be checked to see if they are a pointed to an annexed file.
Cases where such memory use could occur included, but were not limited to:
- git commit -a of a large unlocked file (in v5 mode)
- git-annex adjust when a large file was checked into git directly
Generally, any use of catKey was a potential problem.
Fix by using git cat-file --batch-check to check size before catting.
This adds another git batch process, which is included in the CatFileHandle
for simplicity.
There could be performance impact, anywhere catKey is used. Particularly
likely to affect adjusted branch generation speed, and operations on
unlocked files in v6 mode. Hopefully since the --batch-check and
--batch read the same data, disk buffering will avoid most overhead.
Leaving only the overhead of talking to the process over the pipe and
whatever computation --batch-check needs to do.
This commit was sponsored by Bruno BEAUFILS on Patreon.
Speeds up commands like "git-annex find --in remote" by over 50%.
Profiling showed that adjustGitEnv was 21% of the time and 37% of the
allocations of that command. It copied the environment each time with
getEnvironment.
The only repeated use of adjustGitEnv is in withIndexFile, which tends to
be run at least once per file. So, it was optimised by keeping a cache of
the environment, which can be reused.
There could be other better ways to optimise this. Maybe get the while
environment once at startup. But, then it would have to be serialized back
out each time running a child process, so I doubt that would be a net win.
It might be better to cache a version of the environment that is
pre-modified to use .git-annex/index. But, profiling doesn't show that
modifying the enviroment is taking any significant time.
key2file and file2key were top cost centers according to profiling.
The repeated use of replace was not efficient. This new approach is quite a
lot more efficient.
This commit was sponsored by Denis Dzyubenko on Patreon.
* sync: Previously, when run in a branch with a slash in its name,
such as "foo/bar", the sync branch was "synced/bar". That conflicted
with the sync branch used for branch "bar", so has been changed to
"synced/foo/bar".
* adjust: Previously, when adjusting a branch with a slash in its name,
such as "foo/bar", the adjusted branch was "adjusted/bar(unlocked)".
That conflicted with the adjusted branch used for branch "bar",
so has been changed to "adjusted/foo/bar(unlocked)"
* Also, running sync in an adjusted branch did not correctly sync
changes back to the parent branch when it had a slash in its name.
This bug has been fixed.
Eliminate use of Git.Ref.under and Git.Ref.basename; using
Git.Ref.underBase and Git.Ref.base make everything handle deep branches
correctly.
Probably noone was adjusting deep branches, and v6 is still experimental
anyway, so I'm not going to worry about the mess that was left by that bug.
In the case of git-annex sync, using a fixed git-annex with an old unfixed
one will mean they use different sync branches for a deep branch, and so
they may stop syncing until the old one is upgraded. However, that's only
a problem when syncing between repositories without going via a central
bare repository. Added a warning about this to the CHANGELOG, but it's
probably not going to affect many people at all.
This commit was sponsored by Riku Voipio.
This makes -Jn work with --json and --quiet, where before
setting -Jn disabled those options.
Concurrent json output is currently a mess though since threads output
chunks over top of one-another.
Only done in -J mode because only if there's concurrency can downloading
from two remotes be faster. Without concurrency, it's likely the case that
sequential downloads from the same remote are faster than switching back
and forth between two remotes.
There is some hairy MVar code here, but basically it just keeps
the activeremotes MVar full except when deciding which remote to assign
to a thread.
Also affects gets by sync --content -J
This commit was sponsored by Jochen Bartl.
This was disabled in commit 61ccf95004,
because only the assistant used them, and they were clutter. But, now
--failed also uses them.
Remove the failure log files after successful transfers. Should avoid
most of the clutter problems.
Commit 61ccf95004 mentions a subtle behavior
change, which has now been reverted:
There is one behavior change from this. If glacier is being used, and a
manual git annex get --from glacier fails because the file isn't available
yet, the assistant will no longer later see that failed transfer file and
retry the get.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
Use nextRandom to generate the random UUID, rather than using randomIO.
This gets fixes for the following two bugs in the uuid library.
However, this did not impact git-annex much, so a hard depedency has
not been added on uuid-1.3.12.
https://github.com/aslatter/uuid/issues/15
"v4 UUIDs are not that random"
This doesn't greatly affect git-annex, because even with only
2^64 possible UUIDs, the chance that two git-annex repositories
that are clones of the same git repo get the same UUID is miniscule.
And, git-annex generates only one UUID per run, so preducting
subsequent UUIDs is not a problem.
https://github.com/aslatter/uuid/issues/16
"Remove Random instance for UUID, or mark it as deprecated"
git-annex was using that instance; let's stop before it gets
deprecated or removed.
Show branch:file that is being operated on.
I had to make ActionItem a type and not a type class because
withKeyOptions' passed two different types of values when using the type
class, and I could not get the type checker to accept that.
This bug caused broken tree objects to get built by a later git annex sync.
This is a somewhat unlikely but not impossible situation, and the test
suite's union_merge_regression test tickled it when it was run on FAT.
Mostly the username is only used for the git committer or other display
purposes, and we can just fall back to a dummy value in these cases.
The only remaining place where an error is thrown is when starting local
pairing, which needs the username to be known.
The queue could potentially contain changes from before withAltRepo, and
get flushed inside the call, which would apply the changes to the modified
repo.
Or, changes could be queued in withAltRepo that were intended to affect
the modified repo, but don't get flushed until later.
I don't know of any cases where either happens, but better safe than sorry.
Note that this affect withIndexFile, which is used in git-annex branch
updates. So, it potentially makes things slower. Should not be by much;
the overhead consists only of querying the current queue a couple of times,
and potentially flushing changes queued within withAltRepo earlier, that
could have maybe been bundled with other later changes.
Notice in particular that the existing queue is not flushed when calling
withAltRepo. So eg when git annex add needs to stage files in the index,
it will still bundle them together efficiently.
Added guard in Annex.Transfer to prevent this problem at a deeper level.
I'm unhappy ith NoUUID, but having Maybe UUID instead wouldn't help either
if nothing checked that there was a UUID. Since there legitimately need to
be Remotes that do not have a UUID, I can't see a way to fix it at the type
level, short making there be two separate types of Remotes.
Removed the instance LensGpgEncParams RemoteConfig because it encouraged
code that does not take the RemoteGitConfig into account.
RemoteType's setup was changed to take a RemoteGitConfig,
although the only place that is able to provide a non-empty one is
enableremote, when it's changing an existing remote. This led to several
folow-on changes, and got RemoteGitConfig plumbed through.
This is actually worse than I thought; when git is being run with a
detached work tree, GIT_INDEX_FILE is treated as a path relative to CWD,
instead of the normal behavior of relative the top of the work tree.
This seems to make it basically impossible for any program that wants to
use GIT_INDEX_FILE to use anything other than an absolute path to it; there
are too many configurations to keep straight that can change how git
interprets what should be a simple relative path to a file.
(I have complained to the git developers.)
This affected git annex view. It turns out that some other places
that use GIT_INDEX_FILE were already working around the bug. I removed the
workaround from Annex.Branch since the new workaround will do.
Could not think of a foolproof way to detect if the old adjusted branch was
just behind the current branch. It's possible that the user amended the
adjusting commit at the head of the adjusted branch, for example.
I decided to bail in this situation, instead of just entering the old
branch, so that if git annex adjust succeeds the user is always in a
*current* adjusted branch, not some old and out of date one.
What could perhaps be done is enter the old branch and then update it. But
that seems too magical; the user may have rebased master or something or
may not want to propigate the changes from the old branch. Best to error
out.
It started exporting a isSymbolicLink which supports windows. But,
git-annex does no use symlinks on windows yet and this conflicts with the
function by the same name from unix-compat, so hide it.
git 2.8.1 (or perhaps 2.9.0) is going to prevent git merge from merging in
unrelated branches. Since the webapp's pairing etc features often combine
together repositories with unrelated histories, work around this behavior
change by setting GIT_MERGE_ALLOW_UNRELATED_HISTORIES when the assistant
merges.
Note though that this is not done for git annex sync's merges, so
it will follow git's default or configured behavior.
When git-annex is used with a git version older than 2.2.0, disable support for
adjusted branches, since GIT_COMMON_DIR is needed to update them and was first
added in that version of git.
Made all Annex.Perms file mode changing functions ignore errors when
core.sharedRepository is set, because the file might be owned by someone
else. I don't fancy getting bug reports about crashes due to set modes in
this configuration, which is a very foot-shooty configuration in the first
place.
The fsck warning is necessary because old repos kept files mode 444, which
doesn't allow locking them, and so if the mode remains 444 due to the file
being owned by someone else, the user should be told about it.
When annex.thin is set, adding an object will add the execute bits to the
work tree file, and this does mean that the annex object file ends up
executable.
This doesn't add any complexity that wasn't already present, because git
annex add of an executable file has always ingested it so that the annex
object ends up executable.
But, since an annex object file can be executable or not, when populating
an unlocked file from one, the executable bit is always added or removed
to match the mode of the pointer file.
This is how direct mode does it too, and somehow, for reasons that
currently escape me, this makes git merge not care if it's run with an
empty work tree.
Was using L.readFile, so the Handle would remain open until the garbage
collector got around to it. Changed to explicit open and close, so we know
it's always closed when the function returns.
This makes the direct mode to v6 upgrade able to be performed in one clone
of a repository without affecting other clones, which can continue using v5
and direct mode.
This does mean that it has to write out temp files containing updated
objects for the merge. So may use more disk space, and disk IO, but that
should generally win out over needing to launch N separate
git hash-object processes.
An unlocked present file does not have a pointer file in the worktree, so
info skipped counting it.
It may be that unused was also affected by the problem, but it seemed not
to be in my tests. I think because of the use of the associatedFilesFilter.
This fix slows down both info and unused a little bit, since they have to
query the contents of files from git, but only when handling unlocked files.
Only reverse adjust the changes in the commit, which means that adjustments
do not need to be generally cleanly reversable.
For example, an adjustment can unlock all locked files, but does not need
to worry about files that were originally unlocked when reversing, because
it will only ever be run on files that have been changed. So, it's ok
if it locks all files when reversed, or even leaves all files as-is when
reversed.
Using adjusted/unlocked/master made lots of git stuff dealing with "master"
complain that it was ambiguous. This new appoach is more like view branch
names, and shows the adjustment right there in the branch display even if
only the basename of the branch is shown.
There's a race here, but entering an adjusted branch for the first time is
not something to do when a commit is being made at the same time. Although,
may want to prevent the assistant from committing while entering the
adjusted branch.
So, it will pull and push the original branch, not the adjusted one.
And, for merging, it will use updateAdjustedBranch (not implemented yet).
Note that remaining uses of Git.Branch.current need to be checked too;
for things that should act on the original branch, and not the adjusted
branch.
"git annex adjust" may be a temporary interface, but works for a proof of
concept.
It is pretty fast at creating the adjusted branch. The main overhead is
injecting pointer files. It might be worth optimising that by reusing the
symlink target as the pointer file content. When I tried to do that,
the problem was that the clean filter doesn't use that same format, and so
git thought files had changed. Could be dealt with, perhaps make the clean
filter use symlink format for pointer files when on an adjusted branch?
But the real overhead is in checking out the branch, when git runs the
smudge filter once per file. That is perhaps too slow to be usable,
although it may only affect initial checkout of the branch, and not
updates. TBD.
* add, addurl, import, importfeed: When in a v6 repository on a crippled
filesystem, add files unlocked.
* annex.addunlocked: New configuration setting, makes files always be
added unlocked. (v6 only)
The problem with having the slashes unescaped is, it broke parsing, since
the parser takes the filename to get the part containing the key.
That particularly affected URL keys.
This makes the format be the same as symlinks point to, which keeps things
simple.
Existing pointer files will continue to work ok.
Before, the call to mkProgressUpdater created the directory as a
side-effect, but since that ignored failure to create it, this led to
a "does not exist" exception when the transfer lock file was created,
rather than a permissions error.
So, make sure the directory exists before trying to lock the file in it.
When a PermissionDenied exception is caught, skip making the transfer lock.
This lets downloads from readonly remotes happen.
If an upload is being tried, and the lock file can't be written due to
permissions, then probably the actual transfer will fail for the same
reason, so I think it's ok that it continues w/o taking the lock in that
case.
The type checker should have noticed this, but the changes to mapM
that make it accept any Traversable hid the fact that it was not being
passed a list at all. Thus, what should have returned an empty list most
of the time instead returned [""] which was treated as the name of the
associated file, with disasterout consequences.
When I have time, I should add a test case checking what sync --content
drops. I should also consider replacing mapM with one re-specialized to
lists.
Previously, it only flushed when the queue got larger than 1.
Also, make the queue auto-flush when items are added, rather than needing
to be flushed as a separate step. This simplifies the code and make it more
efficient too, as it avoids needing to read the queue out of the state to
check if it should be flushed.
