sync: Fix bug that prevented pulling changes into direct mode repositories
that were committed to remotes using git commit rather than git-annex sync.
This commit was supported by the NSF-funded DataLad project.
tips/automatically_adding_metadata/pre-commit-annex: Fix to not silently
skip filenames containing non-ascii characters.
git diff-index defaults to munging non-ascii characters. Using -z makes
it not do that, and then we just change the nulls to newlines.
This commit was sponsored by Jochen Bartl on Patreon.
Added annex.merge-annex-branches config setting which can be used to
disable automatic merge of git-annex branches.
I wonder if git-annex merge/sync/assistant should disable this
setting? Not sure yet, so have not done so. May be that users will not set
it in git config, but pass it via -c to commands that need it.
Checking the config setting adds a very small overhead, but it's
only checked once per command so should be insignificant.
This commit was supported by the NSF-funded DataLad project.
Noticed while running this (which a user posted in a comment they deleted
for some reason):
git-annex importfeed https://vimeo.com/logiingimars/videos/rss
The filename that youtube-dl suggests included a subdirectory,
which didn't exist, so renaming to it failed.
This commit was sponsored by mo on Patreon.
Repositories that are upgraded from before that version to this
one will not break, but will just not see the benefit of the mergedrefs log
speeding things up, until one new ref gets merged in.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Fix behavior of --json-progress followed by --json, in which
the latter option disabled the former.
This commit was supported by the NSF-funded DataLad project.
The ghc options were found by Sean Whitton; the debian arm autobuilders
need those to build w/o OOM, and it seems to involve llvm using too much
memory to optimize Test.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
--json: When there are multiple lines of notes about a file, make the note
field multiline, rather than the old behavior of only including the last
line.
Using newlines in the note is perhaps not ideal, but upgrading it to an
array in this case would be an annoying inconsistency to need to deal with.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Merged from Debian.
I think what this actually deals with is the case where gpg is installed,
but gpg-agent is not, since Utility.Gpg.stdParams enables --use-agent
when GPG_BATCH is set, and the test suite enables GPG_BATCH. So, test suite
will work with gpg not installed, or with both gpg and gpg-agent installed,
but not with only gpg.
For this reason, I've also put in an explicit dep on gnupg, although
dpkg-dev recommends it and all debian package builds tend to have it
available implicitly.
Allows using new special remote messages when git-annex supports them,
and avoiding using them when git-annex is too old. The new INFO is one
such message.
There's also the possibility, currently unused, for the special remote's
reply to include some kind of extensions of its own.
Merging this is blocked by https://github.com/datalad/datalad/issues/2124
since it seems it will break datalad. I checked all the other special
remotes and they will be ok.
This commit was supported by the NSF-funded DataLad project.
It's left up to the special remote to detect when git-annex is new enough
to support the message; an old git-annex will blow up.
This commit was supported by the NSF-funded DataLad project.
Added remote.<name>.annex-checkuuid config, which can be set to false to
disable the default checking of the uuid of remotes that point to
directories. This can be useful to avoid unncessary drive spin-ups and
automounting.
Note that the UUID check is still done before writing to the repository,
to avoid writing to the wrong repository if it got relocated. Check is
also done before checkPresent to avoid getting confused about what is in
which repo. This is effectively the same as the use of git-annex-shell
with a uuid to check that the remote repository is the expected one.
Did not bother with the check for retrieveKeyFile because it doesn't
matter if the wrong repo is used then.
This commit was sponsored by Trenton Cronholm on Patreon.
And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
And also now in non-fast mode, since it was just changed to query for the
filename separately.
And avoid processTranscript which mixed up stdout and stderr and could have
led to weirdness if there were warnings that didn't get suppressed.
addurl: When the file youtube-dl will download is already an annexed file,
don't download it again and fail to overwrite it, instead just do nothing,
like it used to when quvi was used.
This commit was sponsored by Anthony DeRobertis on Patreon.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
Chose to make this only handle files actively being downloaded, not temp
files for downloads that were interrupted or files that have been fully
downloaded.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Test suite is always included.
Building with this flag disabled has actually been broken for some time,
since Command.TestRemote uses tasty. Fewer build flags are better, so good
time to drop it.
This commit was sponsored by Thomas Hochstein on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
lookupkey: Support being given an absolute filename to a file within the
current git repository.
This commit was supported by the NSF-funded DataLad project.
initremote, enableremote: Really support gpg subkeys suffixed with an
exclamation mark, which forces gpg to use a specific subkey. (Previous try
had a bug.)
This commit was sponsored by Jake Vosloo on Patreon.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Fully working, including --fast/--relaxed.
Note that, while git-annex addurl --relaxed is not going to check
youtube-dl, I kept git annex importfeed --relaxed checking it.
Thinking is that, let's not break people's importfeed cron jobs, and
importfeed does not typically have to check a large number of new items,
so it's ok if it's a little bit slower when used with youtube playlist
feeds.
importfeed's behavior is also improved (?) when a feed has links in it
to non-media files. Before, those were skipped. Now, the content of the
link is downloaded. This had to be done, because trying to use
youtube-dl is slow, and if those were skipped, it would have to check
every time importfeed was run. While this behavior change may not be
desirable for some feeds, that intersperse links to web pages with
enclosures, it will be desirable for other feeds, that have
non-enclosure directy links to media files.
Remove old quvi modules.
This commit was sponsored by Øyvind Andersen Holm.
As it was getting too expensive to patch out use of the "new" syscalls
We could revisit this if someone has hardware with an older kernel
that's still being maintained, but I've verified that the Synology
NAS that had used a too old kernel version has been updated to 2.6.32.
Was trying to rmdir the file, which had already been deleted, and when that
failed, it skipped trying to delete the parent directories.
Noticed the bug through testremote, but it can't itself detect such
problems as there is no enumeration in the API.
This commit was sponsored by Brock Spratlen on Patreon.
As long as the class of remotes supports exporting, it's tested whether
or not the remote is configured with exporttree=yes.
Also, made testremote of a remote configured with exporttree=yes
disable that configuration for testing non-export storage.
This commit was supported by the NSF-funded DataLad project.
When there are multiple urls for a file, still treat it as being present
in the web when some urls don't work, as long as at least one url does
work.
This is consistent with the other web methods handling of multiple urls.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Actual problem is the keyName was set to "Ref \"sha\"", which led to
this follow-on failure since it contained a space.
The bad data would also get into the export database when exporting to a
non-external special remote. Looking briefly at that, I don't think the bad
data will lead to anything more than a re-upload of the file content
now that the problem has been fixed.
This commit was sponsored by Peter Hogg on Patreon.
Seems I forgot to fully test that feature when documenting it.
git rev-parse needs a colon after a branch to de-reference the tree
it points to, rather than the commit. But that had it adding an extra
colon when the user specified "branch:subdir". So, check if there is a
colon before adding one.
This commit was sponsored by Francois Marier on Patreon.
Windows: Fix reversion that caused the path used to link to annexed
content include the drive letter and full path, rather than being
relative. (`git annex fix` will fix up after this problem).
I've not identified the commit that brought the reversion (probably it
happened this spring when I was removing MisingH and last touched
Utility.Path). Likely commit 18b9a4b8024115db67ae309fdaf54e1553037529?
The problem is that relPathDirToFile got called two paths that had the
slashes different ways around. Since takeDrive includes the first slash,
this made two paths on the same drive seem different and it bailed.
(ifdefs around this to avoid doing extra work on non-windows)
This commit was sponsored by Jack Hill on Patreon.
Get ugly reversion out of CHANGELOG.
Also, relocated the windows stack.yaml to top, and updated windows build
instructions.
This commit was sponsored by Henrik Riomar on Patreon.
wget was broken even in the previous old release of the windows bundle,
this is not new breakage. msys-idn-11.dll and probably more would be needed
to use it. git for windows includes msys-idn2-0.dll instead.
Code for terminating processes on Windows is not linking anymore;
made a warning be displayed instead. This breaks restarting the
assistant and git annex assistant --stop.
I hope to see the code added to the Win32 library, where it should fit
better and should avoid whatever problem is making the linker not like it
when included in git-annex. I opened an issue requesting its addition,
here: https://github.com/haskell/win32/issues/91
This commit was sponsored by Thomas Hochstein on Patreon.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
After a false start, I found a fairly non-intrusive way to deal with it.
Although it only handles transfers -- there may be issues with eg
concurrent dropping of the same key, or other operations.
There is no added overhead when -J is not used, other than an added
inAnnex check. When -J is used, it has to maintain and check a small
Set, which should be negligible overhead.
It could output some message saying that the transfer is being done by
another thread. Or it could even display the same progress info for both
files that are being downloaded since they have the same content. But I
opted to keep it simple, since this is rather an edge case, so it just
doesn't say anything about the transfer of the file until the other
thread finishes.
Since the deferred transfer action still runs, actions that do more than
transfer content will still get a chance to do their other work. (An
example of something that needs to do such other work is P2P.Annex,
where the download always needs to receive the content from the peer.)
And, if the first thread fails to complete a transfer, the second thread
can resume it.
But, this unfortunately means that there's a risk of redundant work
being done to transfer a key that just got transferred.
That's not ideal, but should never cause breakage; the same
thing can occur when running two separate git-annex processes.
The get/move/copy/mirror --from commands had extra inAnnex checks added,
inside the download actions. Without those checks, the first thread
downloaded the content, and then the second thread woke up and
downloaded the same content redundantly.
move/copy/mirror --to is left doing redundant uploads for now. It
would need a second checkPresent of the remote inside the upload
to avoid them, which would be expensive. A better way to avoid
redundant work needs to be found..
This commit was supported by the NSF-funded DataLad project.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Before, there was a window where interrupting an add could result in the
file being moved into the annex, with no symlink yet created.
This commit was supported by the NSF-funded DataLad project.
when storing files there, since that collection is created by initremote.
(This seems to work around some brokenness of the box.com webdav server
which was entering a redirect loop.)
Note that the fix makes locationParent return Nothing instead of "."
when there's no parent directory between the path and the top of the webdav
repo.
This commit was sponsored by André Pereira on Patreon.
In my git-annex repos, I found some stale transfer info files
without lock files.
Pass a mode to tryLockExclusive, so it will create the lock file if
not present, and so not fail to clean up such transfer info files.
Normally, transfer info files are accompanied by a lock file.
But, when alwaysRunTransfer is used, the locking can fail
and it will still write the transfer info file. Perhaps there are other
cases too? Note that mkProgressUpdater's meter
writes to the transfer info file too, and it might be possible for
that meter to fire after runTransfer has cleaned up.
This commit was sponsored by andrea rota.
Fix process and file descriptor leak that was exposed when git-annex was
built with ghc 8.2.1. Apparently ghc has changed its behavior of GC
of open file handles that are pipes to running processes. That
broke git-annex test on OSX due to running out of FDs.
Audited for all uses of Annex.new and made stopCoProcesses be called
once it's done with the state. Fixed several places that might have
leaked in other situations than running the test suite.
This commit was sponsored by Ewen McNeill.
Using annexeval to run probeCrippledFileSystem' caused Git.CurrentRepo.get
to be run. Fixed easily since probeCrippledFileSystem' had no need to use
the Annex monad.
This commit was sponsored by Ethan Aubin.
When the external special remote program crashed, a newline
could be output, which messed up the expected output for --batch mode.
Avoid checking EXPORTSUPPORTED for special remotes that are
not configured to use exports. The datalad special remote apparently is/was
buggy and crashed on EXPORTSUPPORTED. Anyway, there's no need to send
it when the configuration doesn't need it.
This commit was supported by the NSF-funded DataLad project.
Also deletes any tagged pushes that the assistant might have done,
since those would also prevent resetting a branch back.
This commit was sponsored by andrea rota.
Motivation is to remove all metadata when it gets copied from a previous
version of the file, and that is not deisrable.
This commit was supported by the NSF-funded DataLad project.
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
Done to avoid a "tmp" directory appearing in webdav exports.
Also affects non-export webdav remotes, so interrupted uploads using the
old path will not overwrite it. However, PUT is quite likely to be
implemented atomically on web servers anyway, so I doubt this will cause
problems.
inDAVLocation does not url-escape, and so exporting a filename with spaces
to box.com at least resulted in a error 400.
It might also have affected storing keys on a webdav remote, if the key
contained a space or other problem character. Pretty unlikely.
I emailed Clint about the inDAVLocation gotcha, but seems best to fix it
here.
This commit was supported by the NSF-funded DataLad project.
webdav: Checking if a non-existent file is present on Box.com triggered a
bug in its webdav support that generates an infinite series of redirects.
It seems to redirect foo to foo/ to foo/index.php to
foo/index.php/index.php ... Why a webdav endpoint would behave this way
who knows.
Deal with such problems by assuming such behavior means the file is not
present.
Can't simply disable following redirects, because the webdav endpoint could
legitimately be redirected to a new endpoint. So, when this happens
10 redirects have to be followed, before it gives up and assumes this means
the file does not exist.
This commit was supported by the NSF-funded DataLad project.
This basically works, but there's a bug when renaming a file that leaves
a .git-annex-temp-content-key file in the webdav store, that never gets
cleaned up.
Also, exporting files with spaces to box.com seems to fail; perhaps it
does not support it?
This commit was supported by the NSF-funded DataLad project.
In a test, I uploaded a pdf, and several files were derived from it.
After removing the pdf, the derived files went away after approximatly
half an hour. This window does not seem worth warning about every time.
Documented it in the tip.
Removal works, only derives are a potential issue, so allow removing
with a warning. This way, unexporting a file works, and behavior is
consistent with IA remotes whether or not exporttree=yes.
Also tested exporting filenames containing unicode, spaces, underscores.
All worked, despite the IA's faq saying it doesn't.
This commit was sponsored by Trenton Cronholm on Patreon.
It opens a http connection per file exported, but then so does git
annex copy --to s3.
Decided not to munge exported filenames for IA. Too large a chance of
the munging having confusing results. Instead, export of files not
supported by IA, eg with spaces in their name, will fail.
This commit was supported by the NSF-funded DataLad project.
https://github.com/haskell/cabal/issues/4655
This means that when a module is conditionally imported via ifdef
depending on the OS or build flags, the cabal file has to mirror the
same logic there to only list the module then.
Since there are lots of OS's and lots of combinations of build flags
here, it's rather difficult to know if the cabal file has been completelty
correctly updated to match the source code.
So I am very unhappy with needing to update things in two places. I've
only tested this on linux with most build flags enables; this will
probably need significant time and testing to catch every cabal file
tweak that this change to Cabal requires. And it will be a continual
source of compile failures going forward when the code is modified and
the cabal file not also updated.
DRY DRY DRY, I repeat myself, but: DRY! Sigh..
(Also, had to remove all Build.* that are standalone programs from the
Other-Modules list, because since cabal passes those modules to ghc when
building git-annex, it complains that they use module Main. Those
modules are only used when building with the Makefile anyway, so this
change shouldn't break anything.)
This commit was sponsored by Thomas Hochstein on Patreon.
Security fix: Disallow hostname starting with a dash, which would get
passed to ssh and be treated an option. This could be used by an attacker
who provides a crafted ssh url (for eg a git remote) to execute arbitrary
code via ssh -oProxyCommand.
No CVE has yet been assigned for this hole.
The same class of security hole recently affected git itself,
CVE-2017-1000117.
Method: Identified all places where ssh is run, by git grep '"ssh"'
Converted them all to use a SshHost, if they did not already, for
specifying the hostname.
SshHost was made a data type with a smart constructor, which rejects
hostnames starting with '-'.
Note that git-annex already contains extensive use of Utility.SafeCommand,
which fixes a similar class of problem where a filename starting with a
dash gets passed to a program which treats it as an option.
This commit was sponsored by Jochen Bartl on Patreon.
Fix the external special remotes git-annex-remote-ipfs,
git-annex-remote-torrent and the example.sh template to correctly support
filenames with spaces.
This commit was sponsored by John Peloquin on Patreon.
External special remotes will refuse to operate on keys with spaces in
their names. That has never worked correctly due to the design of the
external special remote protocol. Display an error message suggesting
migration.
Not super happy with this, but it's a pragmatic solution. Better than
complicating the external special remote interface and all external special
remotes.
Note that I only made it use SafeKey in Request, not Response. git-annex
does not construct a Response, so that would not add any safety. And
presumably, if git-annex avoids feeding any such keys to an external
special remote, it will never have a reason to make a Response using such a
key. If it did, it would result in a protocol error anyway.
There's still a Serializeable instance for Key; it's used by P2P.Protocol.
There, the Key is always in the final position, so it's ok if it contains
spaces.
Note that the protocol documentation has been fixed to say that the File
may contain spaces. One way that can happen, even though the Key can't,
is when using direct mode, and the work tree filename contains spaces.
When sending such a file to the external special remote the worktree
filename is used.
This commit was sponsored by Thom May on Patreon.
To work around the problem that the external special remote protocol does
not support keys containing spaces.
This commit was sponsored by Denis Dzyubenko on Patreon.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
By forking a worker process and only deleting the test directory once it exits.
This way, if a test leaves files open, they'll get closed when the worker
exits, so avoiding failure to delete open files on Windows, and failure to
delete directories due to NFS lock files.
If a test leaves a git worker process running, the closed pipes should
cause the worker to exit too, also avoiding the problem there. The 10
second sleep ought to give plenty of time for such worker processes to
exit, although this is of course a race.
Finally, even if test directory fails to be deleted still,
it won't appear as if the last test in the test suite failed; the error
will be displayed at the very end.
This commit was supported by the NSF-funded DataLad project.
Should fix this:
lock (v6 --force): FAIL
Exception: .git/annex/keys: removeDirectoryRecursive: unsatisfied constraints (Directory not empty)
Verified that the test case still catches the regression it's meant to.
This commit was supported by the NSF-funded DataLad project.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
QuickCheck added an Arbitrary instance for CTime aka EpochTime. However,
while git-annex's instance disallowed times before the epoch, QuickCheck's
does not. So, rather than using its instance, convert from an Integer.
This commit was sponsored by Thomas Hochstein on Patreon.
Don't trust OSX FSEvents's eventFlagItemModified to be called when the last
writer of a file closes it; apparently that sometimes does not happen,
which prevented files from being quickly added.
This commit was sponsored by John Peloquin on Patreon.
optparse-applicative-0.14.0.0 adds support for these, so have the
Makefile install their scripts when built with it.
CmdLine/GitAnnex/Options.hs now uses action "file" in cmdParams,
which affects the bash and zsh completions, letting them complete
filenames for subcommands that use that. This is not needed for
bash, since bash-completion.bash enables -o bashdefault, which
lets it complete filenames too. But it does not seem to break the bash
completions. It is needed for zsh; the zsh completion otherwise
does not complete filenames. The fish completion will always complete
filenames no matter what. Messy.
This commit was sponsored by Denis Dzyubenko on Patreon.
Previously, only sync branches were merged. This makes regular git push
into a repository watched by the assistant auto-merge.
While this does hardcode an assumption about what the remote tracking
branch is named, which some unusual git configurations won't match,
git-annex sync already made the same assumption.
Also, changed behavior when a tracking branch like
refs/remotes/synced/not/master is received. When on the master branch,
that used to get merged into it, but it's the tracking branch for
not/master, so should only be merged in when on the not/master branch.
This commit was sponsored by Ewen McNeill.
* Added annex.resolvemerge configuration, which can be set to false to
disable the usual automatic merge conflict resolution done by git-annex
sync and the assistant.
* sync: Added --no-resolvemerge option.
Note that disabling merge conflict resolution is probably not a good idea
in a direct mode repo or adjusted branch. Since updates to both are done
outside the usual work tree, if it fails the tree is not left in a
conflicted state, and it would be hard to manually resolve the conflict.
Still, made annex.resolvemerge be supported in those cases for consistency.
This commit was sponsored by Riku Voipio.
When setting metadata of a file that did not exist, no error message was
displayed, unlike getting metadata and most other git-annex commands. Fixed
this oversight.
Note that, if the file exists but is not annexed, there's no error.
This is the same behavior as other git-annex commands.
This commit was supported by the NSF-funded DataLad project.
* move --to=here moves from all reachable remotes to the local repository.
The output of move --from remote is changed slightly, when the remote and
local both have the content. It used to say:
move foo ok
Now:
move foo (from theremote...) ok
That was done so that, when move --to=here is used and the content is
locally present and also in several remotes, it's clear which remotes the
content gets dropped from.
Note that move --to=here will report an error if a non-reachable remote
contains the file, even if the local repository also contains the file. I
think that's reasonable; the user may be intending to move all other copies
of the file from remotes.
OTOH, if a copy of the file is believed to be present in some repository
that is not a configured remote, move --to=here does not report an error.
So a little bit inconsistent, but erroring in this case feels wrong.
copy --to=here came along for free, but it's basically the same behavior as
git-annex get, and probably with not as good messages in edge cases
(especially on failure), so I've not documented it.
This commit was sponsored by Anthony DeRobertis on Patreon.
See my comment. This only avoids the problem for -J; two git-annex
processes started at the same time could still both try to write to
.git/config and one fail. That would be very unlikely though, and it
doesn't really seem worth adding an additional layer of locking around
.git/config.
This commit was supported by the NSF-funded DataLad project.
orElse is great, but was not the right thing to use here because
waitTakeLock could retry for other reasons than the lock being held,
which made tryTakeLock fail when it shouldn't.
Instead, move the code to tryTakeLock and implement waitTakeLock using
tryTakeLock and retry.
(Also, in runTransfer, when checkSaneLock fails, dropLock to avoid leaking a
lock handle.)
This commit was supported by the NSF-funded DataLad project.
When built with concurrent-output 1.9, ssh password prompts will no longer
interfere with the -J display.
To avoid flicker, only done when ssh actually does need to prompt;
ssh is first run in batch mode and if that succeeds the connection is up
and no need to clear regions.
This commit was supported by the NSF-funded DataLad project.
Might want to remove this when it gets fixed, in case adjusted branches are
used in a repo with a great many refs, which would become unnecessarily
slow.
This commit was supported by the NSF-funded DataLad project.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
When ssh connection caching is enabled (and when GIT_ANNEX_USE_GIT_SSH is
not set), only one ssh password prompt will be made per host, and only one
ssh password prompt will be made at a time.
This also fixes a race in prepSocket's stale ssh connection stopping
when run with -J. It was possible for one thread to start a cached ssh
connection, and another thread to immediately stop it, resulting in excess
connections being made.
This commit was supported by the NSF-funded DataLad project.
It takes a single key-value backend, rather than the unncessary and confusing list.
The old option still works if set.
Simplified some old old code too.
This commit was sponsored by Thomas Hochstein on Patreon.
fsck already special-cased dead keys to make --all not report errors with
them, and it makes sense to also expand that to whereis. I think it makes
sense for dead keys to be skipped by all uses of --all, so mistakes can be
completely forgotten about and not come back to haunt us.
The speed impact of testing if the key is dead is negligible for fsck and
whereis, since they use the location log anyway and it gets cached.
This does slow down a few commands that support --all, in particular
metadata --all runs around 2x as slow. I don't think metadata
--all is often used though. It might slow down copy/move/mirror
--all and get --all.
log --all is not affected (does not use the normal --all machinery).
Dead keys will still be processed by --incomplete, --branch,
--failed, and --key. Although it would be unlikely for a dead key to
ave in incomplete or failed transfer. It seems to make perfect sense for
--branch to process keys on the branch, even if dead.
(fsck's special-casing of dead keys was left in, so if one of these options
causes a dead key to be fscked, there will be a nice message.)
This commit was supported by the NSF-funded DataLad project.
Unlike git add -u, git annex add -u does not update the index for files
removed from the working tree. But then, "git add ." stages removals,
and "git annex add ." does not, so that's an existing divergence.
Seems that --update --batch would need to run git ls-files once per line of
batch input, which would surely be too slow, so just throw an error for
that.
This commit was supported by the NSF-funded DataLad project.
This was never supported before. And it doesn't re-encrypt the
gcrypt repo to the new gcrypt-participants, but it does at least now not
crash, and set gcrypt-participants.
This commit was sponsored by andrea rota.
They were silently ignored, a reversion introduced in 6.20160527.
I don't like this regular git remote special case in enableremote, but I
can't see a way to get rid of it. So, check if the existing remote is
a Remote.Git
This commit was sponsored by Trenton Cronholm on Patreon.
This is necessary because as feared, the extra -n parameter that git-annex
passes breaks uses of these environment variables that expect exactly the
parameters that git passes.
For example, see https://github.com/datalad/datalad/issues/1456
It would of course be possible to pre-close stdin before running ssh so not
needing the -n, and I think that would not even break ssh's password
caching. But it would probably involve a lot of work, possibly would need
to deal with some layering violations, and would be error-prone. The really
clean fix would be to make all the ssh stuff return a CreateProcess, which
could have the handle closed when appropriate, but that would be a large
reworing of the code base.
This commit was supported by the NSF-funded DataLad project.
The former can be useful to make remotes that don't get fully synced with
local changes, which comes up in a lot of situations.
The latter was mostly added for symmetry, but could be useful (though less
likely to be).
Implementing `remote.<name>.annex-pull` was a bit tricky, as there's no one
place where git-annex pulls/fetches from remotes. I audited all
instances of "fetch" and "pull". A few cases were left not checking this
config:
* Git.Repair can try to pull missing refs from a remote, and if the local
repo is corrupted, that seems a reasonable thing to do even though
the config would normally prevent it.
* Assistant.WebApp.Gpg and Remote.Gcrypt and Remote.Git do fetches
as part of the setup process of a remote. The config would probably not
be set then, and having the setup fail seems worse than honoring it if it
is already set.
I have not prevented all the code that does a "merge" from merging branches
from remotes with remote.<name>.annex-pull=false. That could perhaps
be done, but it would need a way to map from branch name to remote name,
and the way refspecs work makes that hard to get really correct. So if the
user fetches manually, the git-annex branch will get merged, for example.
Anther way of looking at/justifying this is that the setting is called
"annex-pull", not "annex-merge".
This commit was supported by the NSF-funded DataLad project.
They are handled close the same as they are by git. However, unlike git,
git-annex sometimes needs to pass the -n parameter when using these.
So, this has the potential for breaking some setup, and perhaps there ought
to be a ANNEX_USE_GIT_SSH=1 needed to use these. But I'd rather avoid that
if possible, so let's see if anyone complains.
Almost all places where "ssh" was run have been changed to support the env
vars. Anything still calling sshOptions does not support them. In
particular, rsync special remotes don't. Seems that annex-rsync-transport
already gives sufficient control there.
(Fixed in passing: Remote.Helper.Ssh.toRepo used to extract
remoteAnnexSshOptions and pass them to sshOptions, which was redundant
since sshOptions also extracts those.)
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Fix bug when used with a recently cloned repository, where
"merging" messages were included in the output of configlist (and perhaps
other commands) and caused a "Failed to get annex.uuid configuration"
error.
This does not seem to have been a reversion.
I saw this with configlist, but it seems possible for other commands to be
effected, and it might not always happen only after a fresh clone. Eg, if a
foo/git-annex branch is pushed to the remote, the next git-annex-shell will
auto-merge it and display the message.
Decided to run all git-annex-shell commands with noMessages,
even ones that don't currently use stdout for structured communication.
Better to keep open the possibility for using stdout in the future.
This commit was supported by the NSF-funded DataLad project
The bug was that withFile closes the handle afterwards, but the content
of the file was not read due to laziness. Using readFile avoids it.
This commit was sponsored by Nick Daly on Patreon.
findShellCommand needs a full path to a file in order to check it for a
shebang on Windows. It was being run with only the base name of the external
special remote program, which would only work when it was in the current
directory.
This is why users in
https://github.com/DanielDent/git-annex-remote-rclone/pull/10 and elsewhere
were complaining that the previous improvements to git-annex didn't make
git-remote-rclone work on Windows.
Also, reworked checkearlytermination, which while it worked, seemed
to rely on a race condition. And, improved its error messages.
This commit was sponsored by Shane-o on Patreon.
It was distributing jobs to remotes that were not being used by any other
job. But, suppose that there are only 2 remotes, and -J10. In such a case,
the first 2 downloads would be distributed amoung the 2 remotes, but
the other 8 would all go to remote #1. Improved by keeping a counter
of how many jobs are assigned to a remote, and prefer remotes with fewer
jobs.
Note use of Data.Map.Strict to avoid blowing up space. I kept the
bang-patterns as-is, although probably not needed with Data.Map.Strict.
This commit was sponsored by Jack Hill on Patreon.
The slowdown is not going to be large in typical small-ish repos.
And it does not seem to matter if the assistant reacts a little bit slower
in situations involving the expensive scan, since:
a) Those situations typically involve getting back in sync after something
has changed on a remote, often after a disconnect of some duration.
So taking a few seconds more is not noticable.
b) If the scan finds things that it needs to do, it will start
blocking anyway after 10 transfers are queued (due to use of
queueTransferWhenSmall). So, only the speed of finding the first 10
transfers will be impacted by this change.
This commit was sponsored by Jochen Bartl on Patreon.
It was relying on segmentPaths to work correctly, so when it didn't,
sometimes the file that did not exist got matched up with a non-null
list of results. Fixed by always checking if each parameter exists.
There are two reason segmentPaths might not work correctly.
For one, it assumes that when the original list of paths
has more than 100 paths, it's not worth paying the CPU cost to
preserve input orders.
And then, it fails when a directory such as "." or ".." or
/path/to/repo is in the input list, and the list of found paths
does not start with that same thing. It should probably not be using
dirContains, but something else.
But, it's not clear how to handle this fully. Consider
when [".", "subdir"] has been expanded by git ls-files to
["subdir/1", "subdir/2"]
-- Both of the inputs contained those results, so there's
no one right answer for segmentPaths. All these would be equally valid:
[["subdir/1", "subdir/2"], []]
[[], ["subdir/1", "subdir/2"]]
[["subdir/1"], [""subdir/2"]]
So I've not tried to improve segmentPaths.
* init: When annex.securehashesonly has been set with git-annex config,
copy that value to the annex.securehashesonly git config.
* config --set: As well as setting value in git-annex branch,
set local gitconfig. This is needed especially for
annex.securehashesonly, which is read only from local gitconfig and not
the git-annex branch.
doc/todo/sha1_collision_embedding_in_git-annex_keys.mdwn has the
rationalle for doing it this way. There's no perfect solution; this
seems to be the least-bad one.
This commit was supported by the NSF-funded DataLad project.
Added --securehash option to match files using a secure hash function, and
corresponding securehash preferred content expression.
This commit was sponsored by Ethan Aubin.
Cryptographically secure hashes can be forced to be used in a repository,
by setting annex.securehashesonly. This does not prevent the git repository
from containing files with insecure hashes, but it does prevent the content
of such files from being pulled into .git/annex/objects from another
repository.
We want to make sure that at no point does git-annex accept content into
.git/annex/objects that is hashed with an insecure key. Here's how it
was done:
* .git/annex/objects/xx/yy/KEY/ is kept frozen, so nothing can be
written to it normally
* So every place that writes content must call, thawContent or modifyContent.
We can audit for these, and be sure we've considered all cases.
* The main functions are moveAnnex, and linkToAnnex; these were made to
check annex.securehashesonly, and are the main security boundary
for annex.securehashesonly.
* Most other calls to modifyContent deal with other files in the KEY
directory (inode cache etc). The other ones that mess with the content
are:
- Annex.Direct.toDirectGen, in which content already in the
annex directory is moved to the direct mode file, so not relevant.
- fix and lock, which don't add new content
- Command.ReKey.linkKey, which manually unlocks it to make a
copy.
* All other calls to thawContent appear safe.
Made moveAnnex return a Bool, so checked all callsites and made them
deal with a failure in appropriate ways.
linkToAnnex simply returns LinkAnnexFailed; all callsites already deal
with it failing in appropriate ways.
This commit was sponsored by Riku Voipio.
Yesterday's SHA1 collision attack could be used to generate eg:
SHA256-sfoo--whatever.good
SHA256-sfoo--whatever.bad
Such that they collide. A repository with the good one could have the
bad one swapped in and signed commits would still verify.
I've already mitigated this.
I am not happy that I had to put backend-specific code in file2key. But
it would be very difficult to avoid this layering violation.
Most of the time, when parsing a Key from a symlink target, git-annex
never looks up its Backend at all, so adding this check to a method of
the Backend object would not work.
The Key could be made to contain the appropriate
Backend, but since Backend is parameterized on an "a" that is fixed to
the Annex monad later, that would need Key to change to "Key a".
The only way to clean this up that I can see would be to have the Key
contain a LowlevelBackend, and put the validation in LowlevelBackend.
Perhaps later, but that would be an extensive change, so let's not do
it in this commit which may want to cherry-pick to backports.
This commit was sponsored by Ethan Aubin.
* Run curl with -S, so HTTP errors are displayed, even when
it's otherwise silent.
* When downloading in --json or --quiet mode, use curl in preference
to wget, since curl is able to display only errors to stderr, unlike
wget.
This does mean that downloadQuiet is only silent on stdout, not necessarily
on stderr, which affects a couple other calls of it. For example,
downloading the .git/config of a http remote may show an error message now,
perhaps with slightly suboptimal formatting due to other output.
This adds one extra line of output when a download is successful,
after the progress bar. I don't much like that, but wget does not provide a
way to show HTTP errors without it.
sync: When syncing with a local repository located on a crippled
filesystem, run the post-receive hook there, since it wouldn't get run
otherwise. This makes pushing to repos on FAT-formatted removable drives
update them when receive.denyCurrentBranch=updateInstead.
Made Remote.Git export onLocal, which was cleaned up to not have so many
caveats about its use.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
* Added post-recieve hook, which makes updateInstead work with direct
mode and adjusted branches.
* init: Set up the post-receive hook.
This commit was sponsored by Fernando Jimenez on Patreon.
config group groupwanted numcopies schedule wanted required: Avoid
displaying extraneous messages about repository auto-init, git-annex branch
merging, etc, when being used to get information.
By displaying error messages from the remote then it fails to update
its checked out branch.
Error messages in the default receive.denyCurrentBranch are still
suppressed, which matches user expectations.
This commit was sponsored by Nick Daly on Patreon.
... to avoid it consuming stdin that it shouldn't.
This fixes git-annex-checkpresentkey --batch remote, which didn't output
results for all keys passed into it.
Other git-annex commands that communicate with a remote over ssh may also
have been consuming stdin that they shouldn't have, which could have
impacted using them in eg, shell scripts. For example, a shell script
reading files from stdin and passing them to git annex drop would be
impacted by this bug, whenever git annex drop ran git-annex-shell
checkpresent, it would consume part/all of the stdin that the shell script
was supposed to consume.
Fixed by adding a ConsumeStdin parameter to Annex.Ssh.sshOptions, which
is used throughout git-annex to run ssh (in order for ssh connection
caching to work). Every call site was checked to see if it used
CreatePipe for stdin, and if not was marked NoConsumeStdin.
At first I wanted to make it go ahead and merge into the newborn branch,
so made it use Git.Branch.currentUnsafe to get the current branch. But that
failed:
fatal: ambiguous argument 'refs/heads/master..refs/heads/synced/master':
unknown revision or path not in the working tree.
A whole nother code path to handle merging into newborn branches seemed
excessive, so went with displaying a warning and propigating failure
status.
This commit was sponsored by Brock Spratlen on Patreon.
Refactored some common code into initDb.
This only deals with the problem when creating new databases. If a repo
got bad permissions into it, it's up to the user to deal with it.
This commit was sponsored by Ole-Morten Duesund on Patreon.
The check was broken in two ways.. First, nowhere did it error out when
checkUUIDFile found a different UUID already in the file. Instead,
it overwrote the uuid file.
And, checkUUIDFile's implementation was for some reason always failing with
a ConnectionClosed exception. Apparently something to do with using two
different runResourceT's and a response getting GCed inbetween. I'm pretty
sure that used to work, but changed to a more obviously correct
implementation.
This commit was sponsored by Peter Hogg on Patreon.
Probing for hard link support in the pid locking code is redundant since
git-annex init already probes that. But, it didn't seem worth threading
that data through; the pid locking code runs at most once per git-annex
process, and only on unusual filesystems. Optimising a single hard link
and unlink isn't worth it.
This commit was sponsored by Francois Marier on Patreon.
Git does not provide a switch to find out where this directory is, and
while the git-init man page says it will always be in
/usr/share/git-core/templates, that's not the case on OSX with git
installed from homebrew. So, I used a hack taking the --man-path and
constructing a path from that. Works on both Debian and OSX at least.
This is the same as running git annex reinject --known, followed by
git-annex import. The advantage to having it in one command is that it
only has to hash each file once; the two commands have to
hash the imported files a second time.
This commit was sponsored by Shane-o on Patreon.
import: --deduplicate and --skip-duplicates were implemented inneficiently;
they unncessarily hashed each file twice. They have been improved to only
hash once.
The new approach is to lock down (minimally) and hash files, and then
reuse that information when importing them.
This was rather tricky, especially in detecting changes to files while
they are being imported.
The output of import changed slightly. While before it silently skipped
over files with eg --skip-duplicates, now it shows each file as it starts
to act on it. Since every file is hashed first thing, it would otherwise
not be clear what file import is chewing on. (Actually, it wasn't clear
before when any of the duplicates switches were used.)
This commit was sponsored by Alexander Thompson on Patreon.
Before, only content known to be present somewhere was considered a
duplicate. Now, any content that has been annexed before will be considered
a duplicate, even if all annexed copies of the data have been lost.
Note that --clean-duplicates and --deduplicate still check numcopies,
so won't delete duplicate files unless there's an annexed copy.
This makes import use the same method as reinject --known.
The man page already said that duplicate meant "its content is either
present in the local repository already, or git-annex knows of another
repository that contains it, or it was present in the annex before but has
been removed now". So, this is really only bringing the implementation into
line with the man page.
This commit was sponsored by Jochen Bartl on Patreon.
Wormhole pairing will start to provide an appid to wormhole on 2021-12-31.
An appid can't be provided now because Debian stable is going to ship a
older version of git-annex that does not provide an appid. Assumption is
that by 2021-12-31, this version of git-annex will be shipped in a Debian
stable release. If that turns out to not be the case, this change will need
to be cherry-picked into the git-annex in Debian stable, or its wormhole
pairing will break.
This commit was sponsored by Thomas Hochstein on Patreon.
.. which can be set to true to make git annex sync default to --content.
This may become the default at some point in the future.
As well as being configuable by git config, it can be configured by
git-annex config to control the default behavior in all clones of a
repository.
Had to add a separate --no-content switch to we can tell if it's been
explicitly set, and should override annex.synccontent. If --content was the
default, this complication would not be necessary.
This commit was sponsored by Jake Vosloo on Patreon.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
Argh, didn't need an accumulator here!
I think I use accumulators a lot more than I need to when recusively
processing lists..
This commit was sponsored by Jeff Goeke-Smith on Patreon.
This makes it a little bit slower since it has to check file size,
but worth it to fix a potential memory use problem.
This commit was sponsored by Fernando Jimenez on Patreon.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
esqueleto finally got fixed, thanks to @bitemyapp
Since XMPP was removed, the previous build failures related to it should
no longer be a problem either.
Meanwhile, lts-5.18 fails to build anymore on Debian due to linker
hardening breaking the version of ghc stack uses with that version.
This commit was sponsored by Francois Marier on Patreon.
Any config names can be set using this; git-annex commands will only look
at specific ones that make sense and are worth the overhead of querying the
branch.
This might also be useful for storing whatever other config-type stuff the
user might want to shove into the git-annex branch.
This commit was sponsored by Jochen Bartl on Patreon.
Docs say vicfg can configure everything from git-annex branch,
so it ought to configure numcopies.
Note that commenting out existing numcopies does not unset it.
This commit was sponsored by Thom May on Patreon.
This way we know that after enable-tor, the tor hidden service is fully
published and working, and so there should be no problems with it at
pairing time.
It has to start up its own temporary listener on the hidden service. It
would be nice to have it start the remotedaemon running, so that extra
step is not needed afterwards. But, there may already be a remotedaemon
running, in communication with the assistant and we don't want to start
another one. I thought about trying to HUP any running remotedaemon, but
Windows does not make it easy to do that. In any case, having the user
start the remotedaemon themselves lets them know it needs to be running
to serve the hidden service.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
weasel explained that apparmor limits on what files tor can read do not
apply to sockets (because they're not files). And apparently the
problems I was seeing with hidden services not being accessible had to
do with onion address propigation and not the location of the socket
file.
remotedaemon looks up the HiddenServicePort in torrc, so if it was
previously configured with the socket in /etc, that will still work.
This commit was sponsored by Denis Dzyubenko on Patreon.
This reverts commit 3037feb1bf.
On second thought, this was an overcomplication of what should be the
lowest-level primitive. Let's build bi-directional links at the pairing
level with eg magic wormhole.
Both the local and remote git repositories get remotes added
pointing at one-another.
Makes pairing twice as easy!
Security: The new LINK command in the protocol can be sent repeatedly,
but only by a peer who has authenticated with us. So, it's entirely safe to
add a link back to that peer, or to some other peer it knows about.
Anything we receive over such a link, the peer could send us over the
current connection.
There is some risk of being flooded with LINKs, and adding too many
remotes. To guard against that, there's a hard cap on the number of remotes
that can be set up this way. This will only be a problem if setting up
large p2p networks that have exceptional interconnectedness.
A new, dedicated authtoken is created when sending LINK.
This also allows, in theory, using a p2p network like tor, to learn about
links on other networks, like telehash.
This commit was sponsored by Bruno BEAUFILS on Patreon.
Revert ServerAliveInterval change in 6.20161111, which caused problems
with too many old versions of ssh and unusual ssh configurations.
It should have not been needed anyway since ssh is supposted to
have TCPKeepAlive enabled by default.
1 microsecond delay is ugly.. but, maintaining an queue of a list of timestamps
and taking a new one from the queue each time around, or maintaining a timestamp
counter, would probably be slower.
The attacker could just send a very lot of data, with no \n and it would
all be buffered in memory until the kernel killed git-annex or perhaps OOM
killed some other more valuable process.
This is a low impact security hole, only affecting communication between
local git-annex and git-annex-shell on the remote system. (With either
able to be the attacker). Only those with the right ssh key can do it. And,
there are probably lots of ways to construct git repositories that make git
use a lot of memory in various ways, which would have similar impact as
this attack.
The fix in P2P/IO.hs would have been higher impact, if it had made it to a
released version, since it would have allowed DOSing the tor hidden
service without needing to authenticate.
(The LockContent and NotifyChanges instances may not be really
exploitable; since the line is read and ignored, it probably gets read
lazily and does not end up staying buffered in memory.)
Would have liked to make the Parser parse the file and key pairs, but it
seems that optparse-applicative is unable to handle eg:
many ((,) <$> argument <*> argument)
This commit was sponsored by Thomas Hochstein on Patreon.
* rmurl: Multiple pairs of files and urls can be provided on the
command line.
* rmurl: Added --batch mode.
This commit was sponsored by Trenton Cronholm on Patreon.
* map: Run xdot if it's available in PATH. On OSX, the dot command
does not support graphical display, while xdot does.
* Debian: xdot is a better interactive viewer than dot, so Suggest
xdot, rather than graphviz.
Building w/o the webapp is not supposed to pull in any AGPLed files.
I appear to have written all the code in these files;
the only commit by anyone else is 64e844e1fe
and is a spelling fix that is not copyrightable.
Almost working, but there's a bug in the relaying.
Also, made tor hidden service setup pick a random port, to make it harder
to port scan.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
This makes merging a remote into a freshly created direct mode repository
work the same as it works in indirect mode.
The git-annex branches would get merged in any case by a sync,
since that doesn't use git merge.
This might need to be revisited later to better mirror git's behavior.
git-annex.cabal: Loosen bounds on persistent to allow 2.5, which on Debian
has been patched to work with esqueleto. This may break cabal's resolver on
non-Debian systems; if so, either use stack to build, or run cabal with
--constraint='persistent ==2.2.4.1' Hopefully this mess with esqueleto will
be resolved soon.
https://github.com/prowdsponsor/esqueleto/issues/137
Yesod didn't used to do auth checks for that, but this may have changed.
I don't have a way to reproduce the reported problem yet, but this change
certianly won't hurt anything.
This commit was sponsored by Thom May on Patreon.
ghc 8.0.2 may make this unncessary, but it's not in a stackage version yet,
so put in a workaround.
Note that the linux builds already delete the RPATHs for similar reasons.
This commit was sponsored by Josh Taylor on Patreon.
* S3: Support the special case endpoint needed for the cn-north-1 region.
* Webapp: Don't list the Frankfurt region, as this (and some other new
regions) need V4 authorization which the aws library does not yet use.
This commit was sponsored by Nick Daly on Patreon.
When used with an older version of ssh, any ServerAliveInterval in
~/.ssh/config will be overridden by .git/annex/ssh.config.
This commit was sponsored by Josh Taylor on Patreon.
Restarting a crashing git process could result in filename encoding issues
when not in a unicode locale, as the restarted processes's handles were not
read in raw mode.
Since rawMode is always used when starting a coprocess, didn't bother
to parameterise it and just always enable it for simplicity.
This commit was sponsored by Jake Vosloo on Patreon.
The Makefile was putting them in git-annex.linux/i18n/i18n, and so I18NPATH
did not point to the files. I think that on close enough to Debian systems,
localedef then fell back to using the system-wide locale files, while on
other systems it would fail to generate locales.
So that stalled transfers will be noticed within about 3 minutes,
even if TCPKeepAlive is disabled or doesn't work.
Rather than setting with -o, use -F with another config file,
so that any settings in ~/.ssh/config or /etc/ssh/ssh_config overrides this.
If a transfer fails for some reason, but some data managed to be sent, the
transfer will be retried. (The assistant already did this.)
Possible impacts:
* More ssh prompts if ssh needs to prompt for a password to connect to a
host, or is prompting about some other problem like a ssh key mismatch.
* More data transfer due to retrying, epecially when a remote does not
support resuming a transfer.
In the worst case, a lot of data will be transferred but it fails before
the end, and then all that data gets transferred again plus one byte more;
repeat until it manages to get the whole file.
gpg-agent started deleting its socket file on shutdown, and this tickled an
ugly behavior in removeDirectoryRecursive,
https://github.com/haskell/directory/issues/60
Running removeDirectoryRecursive again on exception avoids the problem.
Closes https://github.com/datalad/datalad/issues/1020
The use of runWriter in scanUnlockedFiles broke due to this change;
it failed with blocked indefinitely in mvar, because the database write
handle was taken while linkFromAnnex needed to also write to it (to update
the inode cache). So, switched to using a separate runWriter for each call
to addAssociatedFileFast. A little less efficient, but not greatly; the
writes should all still be cached.
In the case where the pointer file is in place, and not the content
of the object, lock's performNew was called with filemodified=True,
which caused it to try to repopulate the object from an unmodified
associated file, of which there were none. So, the content of the object
got thrown away incorrectly. This was the cause (although not the root
cause) of data loss in https://github.com/datalad/datalad/issues/1020
The same problem could also occur when the work tree file is modified,
but the object is not, and lock is called with --force. Added a test case
for this, since it's excercising the same code path and is easier to set up
than the problem above.
Note that this only occurred when the keys database did not have an inode
cache recorded for the annex object. Normally, the annex object would be in
there, but there are of course circumstances where the inode cache is out
of sync with reality, since it's only a cache.
Fixed by checking if the object is unmodified; if so we don't need to
try to repopulate it. This does add an additional checksum to the unlock
path, but it's already checksumming the worktree file in another case,
so it doesn't slow it down overall.
Further investigation found a similar problem occurred when smudge --clean
is called on a file and the inode cache is not populated. cleanOldKeys
deleted the unmodified old object file in this case. This was also
fixed by checking if the object is unmodified.
In general, use of getInodeCaches and sameInodeCache is potentially
dangerous if the inode cache has not gotten populated for some reason.
Better to use isUnmodified. I breifly auited other places that check the
inode cache, and did not see any immediate problems, but it would be easy
to miss this kind of problem.
The modification flag was not being set when making modifications deep
in a tree, so parent trees were not updated to contain the modified tree.
Seems to have exposed another bug where the wrong filename gets grafted in.
This commit was sponsored by Brock Spratlen on Patreon.
An easy change now that supportedVersions is a list. Since v3 and v5 are
identical other than version number, just add v3 to the list.
This commit was sponsored by andrea rota.
Fixes a bug introduced with v6 mode that I didn't notice until now.
Probably not many v3 repos left out there, and upgrading them to v6 mode
is not disastrous, only a little premature.
This commit was sponsored by Riku Voipio
.. and have to be checked to see if they are a pointed to an annexed file.
Cases where such memory use could occur included, but were not limited to:
- git commit -a of a large unlocked file (in v5 mode)
- git-annex adjust when a large file was checked into git directly
Generally, any use of catKey was a potential problem.
Fix by using git cat-file --batch-check to check size before catting.
This adds another git batch process, which is included in the CatFileHandle
for simplicity.
There could be performance impact, anywhere catKey is used. Particularly
likely to affect adjusted branch generation speed, and operations on
unlocked files in v6 mode. Hopefully since the --batch-check and
--batch read the same data, disk buffering will avoid most overhead.
Leaving only the overhead of talking to the process over the pipe and
whatever computation --batch-check needs to do.
This commit was sponsored by Bruno BEAUFILS on Patreon.
Currently only done for utf-8 locales because the charset can easily be
told for those. Other locales don't include the charset in their name.
The locale definition is generated under git-annex.linux/locales.
So, this only works if the user can write there.
If locale generation fails for any reason, it's silently skipped.
The git-annex-standalone.deb installs the bundle under /usr, so this locale
generation won't work for non-root users.
Version mismatches between the system locale-archive and the glibc in the
bundle have been observed to cause git crashes.
Unfortunately, this causes locales to not be used in the linux standalone
bundle, as was the case until version 6.20160419.
glibc hardcodes the path to /usr/lib/locale/locale-archive and does not
let an environment variable cause a different locale-archive file to be used.
The only other option to include locales in the bundle would be to include
exploded locale definition directories in the bundle for a number of
locales, generated by localedef. But these take at least 300 kb per locale,
and there are a great many locales; it would be hundreds of megabytes to
include them all.
(Hmm, we could include localdef in the bundle, and check LANG in runshell
and compile the locale directories on the fly. This would need
/usr/share/i18n/ and /usr/lib/locale-archive to be included in the bundle.
It's.. doable.)
I know this is going to once again cause users of the bundle to complain
that eg, ls doesn't show their unicode filenames right. Better than strange
crashes though.
Multiple external special remote processes for the same remote will be
started as needed when using -J.
This should not beak any existing external special remotes, because running
multiple git-annex commands at the same time could already start multiple
processes for the same external special remotes.
This sped up git annex find --not --in web from 6.64s to 5.69s.
The optimised parser is probably more like 50% faster than the general one
it replaced.
Speeds up commands like "git-annex find --in remote" by over 50%.
Profiling showed that adjustGitEnv was 21% of the time and 37% of the
allocations of that command. It copied the environment each time with
getEnvironment.
The only repeated use of adjustGitEnv is in withIndexFile, which tends to
be run at least once per file. So, it was optimised by keeping a cache of
the environment, which can be reused.
There could be other better ways to optimise this. Maybe get the while
environment once at startup. But, then it would have to be serialized back
out each time running a child process, so I doubt that would be a net win.
It might be better to cache a version of the environment that is
pre-modified to use .git-annex/index. But, profiling doesn't show that
modifying the enviroment is taking any significant time.
key2file and file2key were top cost centers according to profiling.
The repeated use of replace was not efficient. This new approach is quite a
lot more efficient.
This commit was sponsored by Denis Dzyubenko on Patreon.
This reverts commit e181603103.
This broke the i386ancient autobuilder due to its use of
--flag git-annex:XMPP --flag=git-annex:dbus
-- Failure when adding dependencies:
fdo-notify: needed ((>=0.3)), stack configuration has no specified version
(latest applicable is 0.3.1)
gnutls: needed ((>=0.1.4)), stack configuration has no specified version
(latest applicable is 0.2)
network-protocol-xmpp: needed (-any), stack configuration has no specified
version (latest applicable is 0.4.8)
OSX autobuilder also seems hosed by it, so too soon.
De-revert later..
* sync: Previously, when run in a branch with a slash in its name,
such as "foo/bar", the sync branch was "synced/bar". That conflicted
with the sync branch used for branch "bar", so has been changed to
"synced/foo/bar".
* adjust: Previously, when adjusting a branch with a slash in its name,
such as "foo/bar", the adjusted branch was "adjusted/bar(unlocked)".
That conflicted with the adjusted branch used for branch "bar",
so has been changed to "adjusted/foo/bar(unlocked)"
* Also, running sync in an adjusted branch did not correctly sync
changes back to the parent branch when it had a slash in its name.
This bug has been fixed.
Eliminate use of Git.Ref.under and Git.Ref.basename; using
Git.Ref.underBase and Git.Ref.base make everything handle deep branches
correctly.
Probably noone was adjusting deep branches, and v6 is still experimental
anyway, so I'm not going to worry about the mess that was left by that bug.
In the case of git-annex sync, using a fixed git-annex with an old unfixed
one will mean they use different sync branches for a deep branch, and so
they may stop syncing until the old one is upgraded. However, that's only
a problem when syncing between repositories without going via a central
bare repository. Added a warning about this to the CHANGELOG, but it's
probably not going to affect many people at all.
This commit was sponsored by Riku Voipio.
gpg 2.1.15 (or so) seems to have added some new fields to the --with-colons
--list-secret-keys output. These include "fpr" and "grp", and come before
the "uid" line. So, the parser was giving up before it saw the name. Fix by
continuing to look for the uid line until the next "sec" line.
This commit was sponsored by Ole-Morten,Duesund on Patreon.
Only done in -J mode because only if there's concurrency can downloading
from two remotes be faster. Without concurrency, it's likely the case that
sequential downloads from the same remote are faster than switching back
and forth between two remotes.
There is some hairy MVar code here, but basically it just keeps
the activeremotes MVar full except when deciding which remote to assign
to a thread.
Also affects gets by sync --content -J
This commit was sponsored by Jochen Bartl.
And any other messages that might be output before a command starts.
Fixes a reversion introduced in version 5.20150727.
During the optparse-applicative conversion, I needed a place to run
per-command global option setters, and I made it get run during the seek stage. But
that is too late to have --json and --quiet disable output produced in the
check stage. Fix is just to run those per-command global option setters at
the same time as the all-command global option setters.
This commit was sponsored by Thom May.
This was originally done in a7ef05a9, but got lost in some change to the
Makefile. Use CROSS_COMPILE=Android to tell configure that it's configuring
for android instead of passing it a parameter.
This was disabled in commit 61ccf95004,
because only the assistant used them, and they were clutter. But, now
--failed also uses them.
Remove the failure log files after successful transfers. Should avoid
most of the clutter problems.
Commit 61ccf95004 mentions a subtle behavior
change, which has now been reverted:
There is one behavior change from this. If glacier is being used, and a
manual git annex get --from glacier fails because the file isn't available
yet, the assistant will no longer later see that failed transfer file and
retry the get.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
Use nextRandom to generate the random UUID, rather than using randomIO.
This gets fixes for the following two bugs in the uuid library.
However, this did not impact git-annex much, so a hard depedency has
not been added on uuid-1.3.12.
https://github.com/aslatter/uuid/issues/15
"v4 UUIDs are not that random"
This doesn't greatly affect git-annex, because even with only
2^64 possible UUIDs, the chance that two git-annex repositories
that are clones of the same git repo get the same UUID is miniscule.
And, git-annex generates only one UUID per run, so preducting
subsequent UUIDs is not a problem.
https://github.com/aslatter/uuid/issues/16
"Remove Random instance for UUID, or mark it as deprecated"
git-annex was using that instance; let's stop before it gets
deprecated or removed.
metadata --json output format has changed, adding a inner json object
named "fields" which contains only the fields and their values.
This should be easier to parse than the old format, which mixed up
metadata fields with other keys in the json object.
Any consumers of the old format will need to be updated.
This adds a dependency on unordered-containers for parsing MetaData
from JSON, but it's a free dependency; aeson pulls in that library.
closes https://github.com/joeyh/git-annex/pull/55
* git-annex.cabal: Temporarily limit to http-conduit <2.2.0
since aws 0.14.0 is not compatible with the newer version.
* git-annex.cabal: Temporarily limit to persistent <2.5
since esqueleto 2.4.3 is not compatible with the newer version.
Added --branch option to copy, drop, fsck, get, metadata, mirror, move, and
whereis commands. This option makes git-annex operate on files that are
included in a specified branch (or other treeish).
The names of the files from the branch that are being operated on are not
displayed yet; only the keys. Displaying the filenames will need changes
to every affected command.
Also, note that --branch can be specified repeatedly. This is not really
documented, but seemed worth supporting, especially since we may later want
the ability to operate on all branches matching a refspec. However, when
operating on two branches that contain the same key, that key will be
operated on twice.
Ignore exceptions when getting the cost and availability for the remote,
and return sane defaults. These defaults are not cached, so if a special
remote program has a transient problem, it will re-query it later.
This bug caused broken tree objects to get built by a later git annex sync.
This is a somewhat unlikely but not impossible situation, and the test
suite's union_merge_regression test tickled it when it was run on FAT.
I noticed move --to failing when there was no disk space. The file was sent
to the remote, but it crashed before it could be dropped locally. This
could fix that.
Added guard in Annex.Transfer to prevent this problem at a deeper level.
I'm unhappy ith NoUUID, but having Maybe UUID instead wouldn't help either
if nothing checked that there was a UUID. Since there legitimately need to
be Remotes that do not have a UUID, I can't see a way to fix it at the type
level, short making there be two separate types of Remotes.
This actually runs faster than building the man pages from the makefile
did. But the main purpose is to let Setup.hs import Build.Mans and so not
need the makefile.
This fixes strange displays in some cases, including whereis showing
many duplicate locations, and showing more total copies than actually
exist.
It's unknown if that lead to data loss when eg, dropping. At the moment,
it seems unlikely it could, since the UUID with \r's appended is not the
same as a UUID without, and so no remote matches it.
It's also unknown if \r's can leak in on windows, perhaps when merging the
git-annex branch.
The tarball on hackage will include only the files needed for cabal install;
it is NOT the full git-annex source tree. While it's totally obnoxious that
cabal files need every file listed out when basic wildcard support could
avoid hundreds of lines, and have to be maintained when files are added,
this does get the tarball size back down to 1 mb.
This also stops stack from complaining that it found modules not listed in
the cabal file.
debian/changelog, debian/NEWS, debian/copyright: Converted to symlinks
to CHANGELOG, NEWS, and COPYRIGHT, which used to symlink to these instead.
This avoids needing to include debian/ in the hackage tarball.
Setup.hs: Build man pages at install time using make and mdwn2man.
If it fails, which it probably will on windows, just skip installing
them.
