This aims to future-proof gpg key generation. OpenPGP is in flux with a
conflict over standards ongoing. It seems not unlikely that different
systems will have different gpg commands that support different algorithms.
This also simplifies the code by using the --quick-gen-key interface rather
than the experimental batch interface. It seems less likely that
--quick-gen-key will break than an experimental interface (whose
documentation I can no longer find).
--quick-gen-key is supported since gpg 2.1.0 (2014).
Sponsored-by: Graham Spencer on Patreon
Note that the use of s2w8 in genUUIDInNameSpace made it truncate unicode
characters. Luckily, genUUIDInNameSpace is only ever used on ASCII
strings as far as I can determine. In particular, git-remote-gcrypt's
gcrypt-id is an ASCII string.
giveup changed to filter out control characters. (It is too low level to
make it use StringContainingQuotedPath.)
error still does not, but it should only be used for internal errors,
where the message is not attacker-controlled.
Changed a lot of existing error to giveup when it is not strictly an
internal error.
Of course, other exceptions can still be thrown, either by code in
git-annex, or a library, that include some attacker-controlled value.
This does not guard against those.
Sponsored-by: Noam Kremen on Patreon
That is a legal url, but parseUrl parses it to "/c:/path"
which is not a valid path on Windows. So as a workaround, use
parseURIPortable everywhere, which removes the leading slash when
run on windows.
Note that if an url is parsed like this and then serialized back
to a string, it will be different from the input. Which could
potentially be a problem, but is probably not in practice.
An alternative way to do it would be to have an uriPathPortable
that fixes up the path after parsing. But it would be harder to
make sure that is used everywhere, since uriPath is also used
when constructing an URI.
It's also worth noting that System.FilePath.normalize "/c:/path"
yields "c:/path". The reason I didn't use it is that it also
may change "/" to "\" in the path and I wanted to keep the url
changes minimal. Also noticed that convertToWindowsNativeNamespace
handles "/c:/path" the same as "c:/path".
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Such an url is not valid; parseURI will fail on it. But git-annex doesn't
actually need to parse the url, because all it needs to do to support
syncing with it is know that it's not a local path, and use git pull and
push.
(Note that there is no good reason for the user to use such an url. An
absolute url is valid and I patched git-remote-gcrypt to support them
years ago. Still, users gonna do anything that tools allow, and
git-remote-gcrypt still supports them.)
Sponsored-by: Jack Hill on Patreon
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
It can't enable or disable debug output, after recent changes, w/o
restarting git-annex, or perhaps messing with the Annex monad's
internals. Doesn't seem worth supporting it any longer.
Prevent windows assistant from trying (and failing) to upgrade itself,
which has never been supported on windows.
The new windows build is made with UPGRADE_LOCATION set, which enabled this
code path that had never run on windows before, and doesn't work. I don't
want to try to support self-upgrade on windows, or generally on other OS's
than the ones where its working, so added a check for that. This way the
build can keep setting UPGRADE_LOCATION and if some later git-annex does
learn how to upgrade itself on some OS, it won't need changing the build
setup.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
So stop documenting it, and stop offering it as a choice in the assistant.
Removed the code that parses it into S3.ReducedRedundancy, because
S3.OtherStorageClass with the value will work just the same and avoids a
special case for a deprecated this.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
Improve git-annex's ability to find the path to its program, especially
when it needs to run itself in another repo to upgrade it.
Some parts of the code used readProgramFile, probably because I forgot that
programPath exists.
I noticed this when a git-annex auto-upgrade failed because it was running
git-annex upgrade --autoonly, but the code to run git-annex used
readProgramFile, which happened to point to an older build of git-annex.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
remoteAnnexConfig will avoid bugs like
a3a674d15b
Use now more generic remoteConfig in a couple places that built
non-annex config settings manually before.
Special remote programs that use GETCONFIG/SETCONFIG are recommended
to implement it.
The description is not yet used, but will be useful later when adding a way
to make initremote list all accepted configs.
configParser now takes a RemoteConfig parameter. Normally, that's not
needed, because configParser returns a parter, it does not parse it
itself. But, it's needed to look at externaltype and work out what
external remote program to run for LISTCONFIGS.
Note that, while externalUUID is changed to a Maybe UUID, checkExportSupported
used to use NoUUID. The code that now checks for Nothing used to behave
in some undefined way if the external program made requests that
triggered it.
Also, note that in externalSetup, once it generates external,
it parses the RemoteConfig strictly. That generates a
ParsedRemoteConfig, which is thrown away. The reason it's ok to throw
that away, is that, if the strict parse succeeded, the result must be
the same as the earlier, lenient parse.
initremote of an external special remote now runs the program three
times. First for LISTCONFIGS, then EXPORTSUPPORTED, and again
LISTCONFIGS+INITREMOTE. It would not be hard to eliminate at least
one of those, and it should be possible to only run the program once.
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Convert Utility.Url to return Either String so the error message can be
displated in the annex monad and so captured.
(When curl is used, its errors are still not caught.)
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
* webapp: Remove configurator for box.com repository, since their
webdav support is going away at the end of this January.
* webapp: Remove configurator for gitlab, which stopped supporting git-annex
some time ago.
This commit was sponsored by Brock Spratlen on Patreon.
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
Both Command.Sync and Annex.Ingest had their own versions of this.
The one in Annex.Ingest used Git.Branch.currentUnsafe, but does not seem
to need it. That is only checking to see if it's in an adjusted unlocked
branch, and when in an adjusted branch, the branch does in fact exist,
so the added check that Git.Branch.current does is fine.
This commit was sponsored by Denis Dzyubenko on Patreon.
