Reversion from commit 436f10771, CustomOutput was forcing quiet output
which overrode the json setting.
find happened to be the only command that uses CustomOutput and also
outputs json. (metadata --get does also use CustomOutput and --json does not
enable json output for that, which may be an oversight, but was already the
behavior before this regression.)
Does --unused bypass required content checks in any meaningful sense?
I documented it as such but am unsure of what required content setting
would be considered to match unused content.
init: Fix a reversion in the last release that prevented automatically
generating and setting a description for the repository.
Seemed best to factor out uuidDescMapRaw that does not
have the default mempty descrition behavior.
I don't much like that behavior, but I know things depend on it.
One thing in particular is `git annex info` which lists the uuids and
descriptions; if the current repo has been initialized in some way that
means it does not have a description, it would not show up w/o that.
(Not only repos created due to this bug might lack that. For example a repo
that was marked dead and had --drop-dead delete its git-annex branch info,
and then came back from the dead would similarly not be in the uuid.log.
Also there have been other versions of git-annex that didn't set a default
description; for years there was no default description.)
When downloading an url and the destination file exists but is empty,
avoid using http range to resume, since a range "bytes=0-" is an unusual
edge case that it's best to avoid relying on working.
This is known to fix a case where importfeed downloaded a partial feed from
such a server. Since importfeed uses withTmpFile, the destination always exists
empty, so it would particularly tickle such problem servers. Resuming from 0
is otherwise possible, but unlikely.
This means that Command.Move and Command.Get don't need to
manually set the stage, and is a lot cleaner conceptually.
Also, this makes Command.Sync.syncFile use the worker pool better.
In the scenario where it first downloads content and then uploads it to
some other remotes, it will start in TransferStage, then enter VerifyStage
and then go back to TransferStage for each transfer to the remotes.
Before, it entered CleanupStage after the download, and stayed in it for
the upload, so too many transfer jobs could run at the same time.
Note that, in Remote.Git, it uses runTransfer and also verifyKeyContent
inside onLocal. That has a Annex state for the remote, with no worker pool.
So the resulting calls to enteringStage won't block in there.
While Remote.Git.copyToRemote does do checksum verification, I
realized that should not use a verification slot in the WorkerPool
to do it. Because, it's reading back from eg, a removable disk to checksum.
That will contend with other writes to that disk. It's best to treat
that checksum verification as just part of the transer. So, removed the todo
item about that, as there's nothing needing to be done.
get, move, copy, sync: When -J or annex.jobs has enabled concurrency,
checksum verification uses a separate job pool than is used for
downloads, to keep bandwidth saturated.
Not yet done for upload checksum verification, but that only affects
remotes on local disks.
Avoid a delay at startup when concurrency is enabled and there are
rsync or gcrypt special remotes, which was caused by git-annex
opening a ssh connection to the remote too early.
sshOptions makes a connection to the ssh server if one is not already open,
when concurrency is enabled. Avoid doing that at startup, when the remote
list is being built, but the remote may not be used at all.
Instead, rsync/gcrypt now runs sshOptions once per ssh connection to the
server. This should not be significant overhead since Remote.Git already
has the same overhead (as do Bup and Ddar).
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
When running multiple concurrent actions, the cleanup phase is run in a
separate queue than the main action queue. This can make some commands
faster, because less time is spent on bookkeeping in between each file
transfer.
But as far as I can see, nothing will be sped up much by this yet, because
all the existing cleanup actions are very light-weight. This is just groundwork
for deferring checksum verification to cleanup time.
This change does mean that if the user expects -J2 will mean that they see no
more than 2 jobs running at a time, they may be surprised to see 4 in some
cases (if the cleanup actions are slow enough to notice).
It might also make sense to enable background cleanup without the -J,
for at least one cleanup action. Indeed, that's the behavior that -J1
has now. At some point in the future, it make make sense to make the
behavior with no -J the same as -J1. The only reason it's not currently
is that git-annex can build w/o concurrent-output, and also any bugs
in concurrent-output (such as perhaps misbehaving on non-VT100 compatible
terminals) are avoided by default by only using it when -J is used.
Add back support for ftp urls, which was disabled as part of the fix for
security hole CVE-2018-10857 (except for configurations which enabled curl
and bypassed public IP address restrictions). Now it will work if allowed
by annex.security.allowed-ip-addresses.
Renamed annex.security.allowed-http-addresses to
annex.security.allowed-ip-addresses because it is not really specific to
the http protocol, also limiting eg, git-annex's use of ftp and via
youtube-dl, several other protocols.
The old name for the config will still work.
If both old and new name are set, the new name will win.
Made responses to git-annex requests be listed under each request.
This did lead to a little duplication since some replies are used for 2
requests, but it also makes it much clearer and easier to see how the
protocol works.
And, it makes each request self-contained, so they can be split out into
separate pages.
When a remote is configured to be readonly, don't allow changing what's
exported to it.
This was missed in the original export remote implementation, but it makes
sense for a readonly export remote to not be allowed to change.
~/.profile works for bash, but not all other login shells.
This setting PATH is a minor convenience for users, particuarly since
typing on android is so much harder. The usual linux standalone bundle
just expects the user to know how to add it to PATH. I don't want this
code to grow special cases for every possible login shell. So displaying a
message to the presumably minority who don't use bash seems like the best
choice.
Longer term, I'd hope termux gets some way to set an environment variable
for all login shells. Systems using PAM can, via ~/.pam_environment. Or
alternatively, add a git-annex package to termux, even if just an installer
package. I'd rather spend time on either of those than on making this minor
thing support more login shells.
This commit was sponsored by mo on Patreon.
* init: When the repository already has a description, don't change it.
* describe: When run with no description parameter it used to set
the description to "", now it will error out.
Importing from a special remote honors its preferred content too; unwanted
files are not imported. But, some preferred content expressions can't be
checked before files are imported, and trying to import with such an
expression will fail.
Tested this with scenarios including changing the preferred content
expression and making sure merging the import didn't delete files that were
no longer wanted.
There was one minor inefficiency mentioned in the todo that I punted on.
Make the import have the previous import as a parent, so eg `git log --stat`
displays a useful diff.
Also a minor optimisation, only calculate the depth of the imported history
once.
Prevents merging the import from deleting the non-preferred files from
the branch it's merged into.
adjustTree previously appended the new list of items to the old, which
could result in it generating a tree with multiple files with the same
name. That is not good and confuses some parts of git. Gave it a
function to resolve such conflicts.
That allowed dealing with the problem of what happens when the import
contains some files (or subtrees) with the same name as files that were
filtered out of the export. The files from the import win.
This includes a note about how include= and exclude= match when exporting
a subtree. I don't know if the note is prominent enough, but the
behavior seems unsurprising enough.
This will let import try to match preferred content expressions before
downloading the content and generating its key.
If an expression needs a key, it preferredContentParser with
preferredContentKeylessTokens will fail to parse it.
standard and groupwanted are not in preferredContentKeylessTokens
because they may refer to an expression that refers to a key.
That needs further work to support them.
