Block other threads while the export database is being constructed (or
updated) by the first thread to try to access it.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
That could cause git-annex to get confused about whether a locked file's
content was present, when the object file got touched.
Unfortunately this means more work sometimes when annex.thin is set,
since it has to checksum the file to tell if it's still got the right
content.
Had to suppress output when inAnnex calls isUnmodified, otherwise
"(checksum...)" would be printed in places it ought not to be,
eg "git annex get" could turn out not need to get anything, and
so only display that.
This commit was sponsored by Ole-Morten Duesund on Patreon.
* rmurl: Fix a case where removing the last url left git-annex thinking
content was still present in the web special remote.
* SETURLPRESENT, SETURIPRESENT, SETURLMISSING, and SETURIMISSING
used to update the presence information of the external special remote
that called them; this was not documented behavior and is no longer done.
Done by making setUrlPresent and setUrlMissing only update presence info
for the web, and only when the url is a web url. See the comment for
reasoning about why that's the right thing to do.
In AddUrl, had to make it update location tracking, to handle the
non-web-url case.
This commit was sponsored by Ewen McNeill on Patreon.
* init: Improve generated post-receive hook, so it won't fail when
run on a system whose git-annex is too old to support git-annex post-receive
* init: Update the post-receive hook when re-run in an existing repository.
This commit was sponsored by Jack Hill on Patreon.
This reverts commit b18fb1e343.
That broke support for old git-annex-shell before p2pstdio was added.
The immediate problem is that postAuth had a fallthrough case
that sent an error back to the peer, but sending an error back when the
connection is closed is surely not going to work.
But thinking about it some more, making every function that uses receiveMessage
need to handle ProtocolEOF adds a lot of complication, so I don't want
to do that.
The commit only cleaned up the test suite output a tiny bit, so I'm just
gonna revert it for now.
download is documented as displaying an error when download fails, but
it didn't when the url was not valid at all. That leads to confusing
behavior.
Also, display the url with --debug
Untested, on FreeBSD but enough to fix the listed build errors.
Seems that System.Posix.Files must have used to export this stuff and it
was split.
This commit was sponsored by Peter on Patreon.
Work around git cat-file --batch's protocol not supporting newlines by
running git cat-file not batched and passing the filename as a
parameter.
Of course this is quite a lot less efficient, especially because it
currently runs it multiple times to query for different pieces of
information.
Also, it has subtly different behavior when the batch process was
started and then some changes were made, in which case the batch process
sees the old index but this workaround sees the current index. Since
that batch behavior is mostly a problem that affects the assistant and has
to be worked around in it, I think I can get away with this difference.
I don't know of any other problems with newlines in filenames, everything
else in git I can think of supports -z. And git-annex's json output
supports newlines in filenames so downstream parsers from git-annex will be ok.
git-annex commands that use --batch themselves don't support newlines
in input filenames; using --json --batch is currently a way around that
problem.
This commit was sponsored by Ewen McNeill on Patreon.
v6: When a file is unlocked but has not been modified, and the unlocking is
only staged, git-annex add did not lock it. Now it will, for consistency
with how modified files are handled and with v5.
Note the removal of the sameInodeCache check. Otherwise it would see
that the unmodified file is unmodified and stop there. That check seems to have
been copied from the direct mode branch. But, direct mode had a specific
reason to check for unmodified content, that does not apply to v6.
The second pass means there is potential for a race, eg the unlocked
file could be modified in between the first and second passes.
No problem with that, since both passes do the same thing.
This commit was sponsored by Jake Vosloo on Patreon.
* Don't use GIT_PREFIX when GIT_WORK_TREE=. because it seems git
does not intend GIT_WORK_TREE to be relative to GIT_PREFIX in that
case, despite GIT_WORK_TREE=.. being relative to GIT_PREFIX.
* Don't use GIT_PREFIX to fix up a relative GIT_DIR, because
git 2.11 sets GIT_PREFIX set to a path it's not relative to.
and apparently GIT_DIR is never relative to GIT_PREFIX.
Commit e50ed4ba48 led us down this path
by working around a git bug by relying on the barely documented GIT_PREFIX.
This commit was sponsored by Trenton Cronholm on Patreon.
v6: Fix annex object file permissions when git-annex add is run on a
modified unlocked file, and in some related cases.
If a hard link is made, don't freeze it; annex.thin
uses writable object files.
Also: For some reason, linkToAnnex used to thawContent src. I can see no
reason why it needed to do that, so I eliminated that.
This commit was sponsored by Brock Spratlen on Patreon.
Probably not noticed until now because the queue is large enough that two
threads each filling theirs at the same time and flushing is unlikely to
happen.
Also made explicit that each worker thread gets its own queue.
I think that was the case before, but if something was put in the queue
before worker threads were forked off, they could have each inherited the
same queue.
Could have gone with a single shared queue, but per-worker queues is more
efficient, because a worker can add lots of stuff to its own queue without
any locking.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Avoids annex.largefiles inconsitency and also avoids a lot of
unneccessary calls to the clean filter when a large repo's clone
is being initialized.
This commit was supported by the NSF-funded DataLad project.
v6: When annex.largefiles is not configured for a file, running git add or
git commit, or otherwise using git to stage a file will add it to the annex
if the file was in the annex before, and to git otherwise. This is to avoid
accidental conversion.
Note that git-annex add's behavior has not changed, for reasons explained
in the added comment.
Performance: No added overhead when annex.largefiles is configured.
When not configured, there is an added call to catObjectMetaData,
which involves a round trip through git cat-file --batch.
However, the earlier catKeyFile primes the cache for it.
This commit was supported by the NSF-funded DataLad project.
When --batch is used with matching options like --in, --metadata, etc, only
operate on the provided files when they match those options. Otherwise, a
blank line is output in the batch protocol.
Affected commands: find, add, whereis, drop, copy, move, get
In the case of find, the documentation for --batch already said it honored
the matching options. The docs for the rest didn't, but it makes sense to
have them honor them. While this is a behavior change, why specify the
matching options with --batch if you didn't want them to apply?
Note that the batch output for all of the affected commands could
already output a blank line in other cases, so batch users should
already be prepared to deal with it.
git-annex metadata didn't seem worth making support the matching options,
since all it does is output metadata or set metadata, the use cases for
using it in combination with the martching options seem small. Made it
refuse to run when they're combined, leaving open the possibility for later
support if a use case develops.
This commit was sponsored by Brett Eisenberg on Patreon.
Added getStaged, to get the versions of git-annex branch files staged in its
index, and use during transitions so the result of merging sibling branches
is used.
The catFileStop in performTransitionsLocked is absolutely necessary,
without that the bug still occurred, because git cat-file was already
running and was looking at the old index file.
Note that getLocal still has cat-file look at the git-annex branch, not the
index. It might be faster if it looked at the index, but probably only
marginally so, and I've not benchmarked it to see if it's faster at all. I
didn't want to change unrelated behavior as part of this bug fix. And as
the need for catFileStop shows, using the index file has added
complications.
Anyway, it still seems fine for getLocal to look at the git-annex branch,
because normally the index file is updated just before the git-annex branch
is committed, and so they'll contain the same information. It's only during
a transition that the two diverge.
This commit was sponsored by Paul Walmsley in honor of Mark Phillips.
Work around git bug that runs smudge/clean filters at the top of the
repository while passing them a relative GIT_WORK_TREE that may point
outside of the repository, by using GIT_PREFIX to get back to the
subdirectory where a relative GIT_WORK_TREE is valid.
git devs have been informed of the bug and may fix it, which could conveivably
break this fix, but as it is, this works back to git 1.7.6.
This commit was sponsored by Jochen Bartl on Patreon.
Send User-Agent and any configured annex.http-headers when downloading with
http, fixes reversion introduced when switching to http-client.
This commit was sponsored by mo on Patreon.
